Re: Problem with ata layer in 2.6.24

[Gene Heskett <gene.heskett@gmail.com>]

On Tuesday 29 January 2008, Adam Turk wrote:
>I just found this thread and it looks like it will fix my problem too.  I
> have an IDE cd-rw drive and 2 SCSI hard drives.  My ide cd-rw drive hasn't
> been showing up.  I looked at setting scsi cdrom support
> (CONFIG_BLOCK_DEV_SR) but it doesn't mention anything about ide drives
> using libata. I know the drive is being detecting by looking at dmesg:
>ata_piix 0000:00:07.1: version 2.12
>scsi1 : ata_piix
>scsi2 : ata_piix
>ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>ata1.00: ATAPI: Memorex 52MAXX 3252AJ1, 4WS2, max UDMA/33
>ata1.00: configured for UDMA/33
>ata2: port disabled. ignoring.
>scsi 1:0:0:0: CD-ROM            Memorex  52MAXX 3252AJ1   4WS2 PQ: 0 ANSI: 5
>if this works then it really needs to move and be renamed.  I am compiling
> with DEV_SR set.
>
>Just my $0.02 but may be worth more or less,
>Adam
>
That fixed me right up, Adam, & k3b is once again as happy as a clam.

-- 
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Main's Law:
	For every action there is an equal and opposite government program.