From: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, linux-mm@kvack.org,
apw@shadowen.org, balbir@linux.vnet.ibm.com
Subject: Re: 2.6.24-mm1 Build Faliure on pgtable_32.c
Date: Mon, 4 Feb 2008 09:25:43 +0530 [thread overview]
Message-ID: <20080204035543.GA8186@linux.vnet.ibm.com> (raw)
In-Reply-To: <20080203171634.58ab668b.akpm@linux-foundation.org>
Hi Andrew,
The 2.6.24-mm1 kernel build fails with
arch/x86/mm/pgtable_32.c: In function `pgd_mop_up_pmds':
arch/x86/mm/pgtable_32.c:302: warning: passing arg 1 of `pmd_free' from incompatible pointer type
arch/x86/mm/pgtable_32.c:302: error: too few arguments to function `pmd_free'
I have tested the patch for the build failure only.
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
--
--- linux-2.6.24/arch/x86/mm/pgtable_32.c 2008-02-04 07:36:36.000000000 +0000
+++ linux-2.6.24/arch/x86/mm/~pgtable_32.c 2008-02-04 07:38:02.000000000 +0000
@@ -286,7 +286,7 @@ static void pgd_dtor(void *pgd)
* preallocate which never got a corresponding vma will need to be
* freed manually.
*/
-static void pgd_mop_up_pmds(pgd_t *pgdp)
+static void pgd_mop_up_pmds(struct mm_struct *mm, pgd_t *pgdp)
{
int i;
@@ -299,7 +299,7 @@ static void pgd_mop_up_pmds(pgd_t *pgdp)
pgdp[i] = native_make_pgd(0);
paravirt_release_pd(pgd_val(pgd) >> PAGE_SHIFT);
- pmd_free(pmd);
+ pmd_free(mm, pmd);
}
}
}
@@ -327,7 +327,7 @@ static int pgd_prepopulate_pmd(struct mm
pmd_t *pmd = pmd_alloc_one(mm, addr);
if (!pmd) {
- pgd_mop_up_pmds(pgd);
+ pgd_mop_up_pmds(mm, pgd);
return 0;
}
@@ -347,7 +347,7 @@ static int pgd_prepopulate_pmd(struct mm
return 1;
}
-static void pgd_mop_up_pmds(pgd_t *pgd)
+static void pgd_mop_up_pmds(struct mm_struct *mm, pgd_t *pgdp)
{
}
#endif /* CONFIG_X86_PAE */
@@ -368,7 +368,7 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
void pgd_free(struct mm_struct *mm, pgd_t *pgd)
{
- pgd_mop_up_pmds(pgd);
+ pgd_mop_up_pmds(mm,pgd);
quicklist_free(0, pgd_dtor, pgd);
}
--
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.
next prev parent reply other threads:[~2008-02-04 3:55 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-04 1:16 2.6.24-mm1 Andrew Morton
2008-02-04 3:55 ` Kamalesh Babulal [this message]
2008-02-04 4:31 ` 2.6.24-mm1 Build Faliure on pgtable_32.c Balbir Singh
2008-02-04 7:36 ` 2.6.24-mm1 Ingo Molnar
2008-02-04 16:22 ` [PATCH] 2.6.24-mm1 section type conflict cleanup Kamalesh Babulal
2008-02-04 18:04 ` Sam Ravnborg
2008-02-05 4:49 ` Kamalesh Babulal
2008-02-04 20:29 ` 2.6.24-mm1: ppc32: too few arguments to function 'reserve_bootmem' Mariusz Kozlowski
2008-02-04 22:40 ` Andrew Morton
2008-02-05 13:00 ` Sergei Shtylyov
2008-02-05 13:25 ` Bernhard Walle
2008-02-04 21:56 ` 2.6.24-mm1: module params broken Hugh Dickins
2008-02-04 23:06 ` Andrew Morton
2008-02-05 0:06 ` Hugh Dickins
2008-02-05 0:16 ` Andrew Morton
2008-02-04 22:23 ` 2.6.24-mm1 - build error, AMD MCE using Intel ifdef'd log function Zan Lynx
2008-02-04 23:10 ` Andrew Morton
2008-02-04 22:32 ` 2.6.24-mm1 - Build failure at net/sched/cls_flow.c:598 Tilman Schmidt
2008-02-04 23:25 ` Andrew Morton
2008-02-05 7:24 ` Rami Rosen
2008-02-05 16:20 ` [-mm Patch] arch/um/kernel/mem.c: fix a shadowed variable WANG Cong
2008-02-05 16:25 ` [-mm Patch] arch/um/kernel/initrd.c: fix a missed conversion specifier WANG Cong
2008-02-05 16:59 ` Jeff Dike
2008-02-05 16:53 ` 2.6.24-mm1 Valdis.Kletnieks
2008-02-05 17:01 ` 2.6.24-mm1 Arjan van de Ven
2008-02-05 19:48 ` 2.6.24-mm1 Valdis.Kletnieks
2008-02-05 19:50 ` 2.6.24-mm1 Arjan van de Ven
2008-02-05 21:25 ` 2.6.24-mm1 Valdis.Kletnieks
2008-02-05 20:19 ` 2.6.24-mm1 Andrew Morton
2008-02-06 11:13 ` 2.6.24-mm1 KOSAKI Motohiro
2008-02-06 11:15 ` 2.6.24-mm1 Ingo Molnar
2008-02-06 11:19 ` 2.6.24-mm1 KOSAKI Motohiro
2008-02-13 17:52 ` 2.6.24 git2/mm1: cpu_to_node mapping to non-existant nodes causing boot failure Mel Gorman
2008-02-13 18:45 ` Mike Travis
2008-02-14 20:17 ` Mel Gorman
2008-02-14 20:41 ` Mike Travis
2008-02-15 2:02 ` Mel Gorman
2008-02-15 15:46 ` Mike Travis
2008-02-16 20:34 ` Mike Travis
2008-02-17 0:23 ` Mike Travis
2008-02-19 16:12 ` Mike Travis
2008-02-19 19:23 ` Mel Gorman
2008-02-19 19:29 ` Mike Travis
2008-02-27 6:29 ` Yinghai Lu
2008-02-27 14:37 ` Mike Travis
2008-02-27 17:25 ` Yinghai Lu
2008-02-28 15:42 ` Mel Gorman
2008-02-28 17:45 ` Yinghai Lu
2008-03-03 16:27 ` Mel Gorman
2008-03-03 17:45 ` Ingo Molnar
2008-03-03 18:56 ` Mel Gorman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080204035543.GA8186@linux.vnet.ibm.com \
--to=kamalesh@linux.vnet.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=apw@shadowen.org \
--cc=balbir@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox