public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
	sam@ravnborg.org, apw@shadowen.org, balbir@linux.vnet.ibm.com
Subject: Re: [PATCH] 2.6.24-mm1 section type conflict cleanup
Date: Mon, 4 Feb 2008 21:52:23 +0530	[thread overview]
Message-ID: <20080204162223.GA6888@linux.vnet.ibm.com> (raw)
In-Reply-To: <20080203171634.58ab668b.akpm@linux-foundation.org>

Hi Andrew,

The 2.6.24-mm1 kernel build fails at many places with section type
conflict build error.

drivers/net/typhoon.c:181: error: typhoon_card_info causes a section type conflict
make[2]: *** [drivers/net/typhoon.o] Error 1

drivers/net/natsemi.c:245: error: natsemi_pci_info causes a section type conflict
make[2]: *** [drivers/net/natsemi.o] Error 1

drivers/net/bnx2.c:95: error: board_info causes a section type conflict
make[2]: *** [drivers/net/bnx2.o] Error 1

drivers/net/bnx2x.c:112: error: board_info causes a section type conflict
make[2]: *** [drivers/net/bnx2x.o] Error 1

drivers/net/bnx2x.c:112: error: board_info causes a section type conflict
make[2]: *** [drivers/net/bnx2x.o] Error 1

drivers/net/via-velocity.c:453: error: velocity_id_table causes a section type conflict
make[2]: *** [drivers/net/via-velocity.o] Error 1

drivers/net/starfire.c:350: error: netdrv_tbl causes a section type conflict
make[2]: *** [drivers/net/starfire.o] Error 1


I have tested the patch for build test only

Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
--
--- linux-2.6.24/drivers/net/typhoon.c	2008-01-25 04:28:37.000000000 +0530
+++ linux-2.6.24/drivers/net/~typhoon.c	2008-02-04 16:21:55.000000000 +0530
@@ -178,7 +178,7 @@ enum typhoon_cards {
 };
 
 /* directly indexed by enum typhoon_cards, above */
-static const struct typhoon_card_info typhoon_card_info[] __devinitdata = {
+static const struct typhoon_card_info typhoon_card_info[] __devinitconst = {
 	{ "3Com Typhoon (3C990-TX)",
 		TYPHOON_CRYPTO_NONE},
 	{ "3Com Typhoon (3CR990-TX-95)",
--- linux-2.6.24/drivers/net/natsemi.c	2008-02-04 14:57:00.000000000 +0530
+++ linux-2.6.24/drivers/net/~natsemi.c	2008-02-04 16:36:22.000000000 +0530
@@ -242,7 +242,7 @@ static const struct {
 	const char *name;
 	unsigned long flags;
 	unsigned int eeprom_size;
-} natsemi_pci_info[] __devinitdata = {
+} natsemi_pci_info[] __devinitconst = {
 	{ "Aculab E1/T1 PMXc cPCI carrier card", NATSEMI_FLAG_IGNORE_PHY, 128 },
 	{ "NatSemi DP8381[56]", 0, 24 },
 };
--- linux-2.6.24/drivers/net/bnx2.c	2008-02-04 14:56:59.000000000 +0530
+++ linux-2.6.24/drivers/net/~bnx2.c	2008-02-04 16:44:02.000000000 +0530
@@ -92,7 +92,7 @@ typedef enum {
 /* indexed by board_t, above */
 static const struct {
 	char *name;
-} board_info[] __devinitdata = {
+} board_info[] __devinitconst = {
 	{ "Broadcom NetXtreme II BCM5706 1000Base-T" },
 	{ "HP NC370T Multifunction Gigabit Server Adapter" },
 	{ "HP NC370i Multifunction Gigabit Server Adapter" },
--- linux-2.6.24/drivers/net/bnx2.c	2008-02-04 16:44:47.000000000 +0530
+++ linux-2.6.24/drivers/net/~bnx2.c	2008-02-04 16:47:08.000000000 +0530
@@ -104,7 +104,7 @@ static const struct {
 	{ "Broadcom NetXtreme II BCM5709 1000Base-SX" },
 	};
 
-static struct pci_device_id bnx2_pci_tbl[] = {
+static struct pci_device_id bnx2_pci_tbl[] __devinitconst = {
 	{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706,
 	  PCI_VENDOR_ID_HP, 0x3101, 0, 0, NC370T },
 	{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706,
--- linux-2.6.24/drivers/net/bnx2x.c	2008-02-04 14:57:00.000000000 +0530
+++ linux-2.6.24/drivers/net/~bnx2x.c	2008-02-04 18:01:14.000000000 +0530
@@ -109,7 +109,7 @@ enum bnx2x_board_type {
 /* indexed by board_t, above */
 static const struct {
 	char *name;
-} board_info[] __devinitdata = {
+} board_info[] __devinitconst = {
 	{ "Broadcom NetXtreme II BCM57710 XGb" }
 };
 
--- linux-2.6.24/drivers/net/starfire.c	2008-01-25 04:28:37.000000000 +0530
+++ linux-2.6.24/drivers/net/~starfire.c	2008-02-04 18:08:08.000000000 +0530
@@ -347,7 +347,7 @@ MODULE_DEVICE_TABLE(pci, starfire_pci_tb
 static const struct chip_info {
 	const char *name;
 	int drv_flags;
-} netdrv_tbl[] __devinitdata = {
+} netdrv_tbl[] __devinitconst = {
 	{ "Adaptec Starfire 6915", CanHaveMII },
 };
 
--- linux-2.6.24/drivers/net/via-velocity.c	2008-02-04 14:57:00.000000000 +0530
+++ linux-2.6.24/drivers/net/~via-velocity.c	2008-02-04 18:04:21.000000000 +0530
@@ -450,7 +450,7 @@ static const struct velocity_info_tbl ch
  *	device driver. Used for hotplug autoloading.
  */
 
-static const struct pci_device_id velocity_id_table[] __devinitdata = {
+static const struct pci_device_id velocity_id_table[] __devinitconst = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_612X) },
 	{ }
 };
-- 
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.

  parent reply	other threads:[~2008-02-04 16:22 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-02-04  1:16 2.6.24-mm1 Andrew Morton
2008-02-04  3:55 ` 2.6.24-mm1 Build Faliure on pgtable_32.c Kamalesh Babulal
2008-02-04  4:31   ` Balbir Singh
2008-02-04  7:36 ` 2.6.24-mm1 Ingo Molnar
2008-02-04 16:22 ` Kamalesh Babulal [this message]
2008-02-04 18:04   ` [PATCH] 2.6.24-mm1 section type conflict cleanup Sam Ravnborg
2008-02-05  4:49     ` Kamalesh Babulal
2008-02-04 20:29 ` 2.6.24-mm1: ppc32: too few arguments to function 'reserve_bootmem' Mariusz Kozlowski
2008-02-04 22:40   ` Andrew Morton
2008-02-05 13:00     ` Sergei Shtylyov
2008-02-05 13:25     ` Bernhard Walle
2008-02-04 21:56 ` 2.6.24-mm1: module params broken Hugh Dickins
2008-02-04 23:06   ` Andrew Morton
2008-02-05  0:06     ` Hugh Dickins
2008-02-05  0:16       ` Andrew Morton
2008-02-04 22:23 ` 2.6.24-mm1 - build error, AMD MCE using Intel ifdef'd log function Zan Lynx
2008-02-04 23:10   ` Andrew Morton
2008-02-04 22:32 ` 2.6.24-mm1 - Build failure at net/sched/cls_flow.c:598 Tilman Schmidt
2008-02-04 23:25   ` Andrew Morton
2008-02-05  7:24     ` Rami Rosen
2008-02-05 16:20 ` [-mm Patch] arch/um/kernel/mem.c: fix a shadowed variable WANG Cong
2008-02-05 16:25 ` [-mm Patch] arch/um/kernel/initrd.c: fix a missed conversion specifier WANG Cong
2008-02-05 16:59   ` Jeff Dike
2008-02-05 16:53 ` 2.6.24-mm1 Valdis.Kletnieks
2008-02-05 17:01   ` 2.6.24-mm1 Arjan van de Ven
2008-02-05 19:48     ` 2.6.24-mm1 Valdis.Kletnieks
2008-02-05 19:50       ` 2.6.24-mm1 Arjan van de Ven
2008-02-05 21:25         ` 2.6.24-mm1 Valdis.Kletnieks
2008-02-05 20:19       ` 2.6.24-mm1 Andrew Morton
2008-02-06 11:13 ` 2.6.24-mm1 KOSAKI Motohiro
2008-02-06 11:15   ` 2.6.24-mm1 Ingo Molnar
2008-02-06 11:19     ` 2.6.24-mm1 KOSAKI Motohiro
2008-02-13 17:52 ` 2.6.24 git2/mm1: cpu_to_node mapping to non-existant nodes causing boot failure Mel Gorman
2008-02-13 18:45   ` Mike Travis
2008-02-14 20:17     ` Mel Gorman
2008-02-14 20:41       ` Mike Travis
2008-02-15  2:02         ` Mel Gorman
2008-02-15 15:46           ` Mike Travis
2008-02-16 20:34           ` Mike Travis
2008-02-17  0:23           ` Mike Travis
2008-02-19 16:12             ` Mike Travis
2008-02-19 19:23               ` Mel Gorman
2008-02-19 19:29                 ` Mike Travis
2008-02-27  6:29                 ` Yinghai Lu
2008-02-27 14:37                   ` Mike Travis
2008-02-27 17:25                     ` Yinghai Lu
2008-02-28 15:42                   ` Mel Gorman
2008-02-28 17:45                     ` Yinghai Lu
2008-03-03 16:27                       ` Mel Gorman
2008-03-03 17:45                         ` Ingo Molnar
2008-03-03 18:56                           ` Mel Gorman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080204162223.GA6888@linux.vnet.ibm.com \
    --to=kamalesh@linux.vnet.ibm.com \
    --cc=akpm@linux-foundation.org \
    --cc=apw@shadowen.org \
    --cc=balbir@linux.vnet.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=sam@ravnborg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox