ath5k failure with 2.6.24-git14

[Tino Keitel <tino.keitel@gmx.de>]

Hi,

I tried the current git (9ef9dc69d4167276c04590d67ee55de8380bc1ad) and
got the following error message from ath5k:

ath5k_pci 0000:02:00.0: registered as 'phy0'
ath5k phy0: failed to resume the MAC Chip
ath5k_pci: probe of 0000:02:00.0 failed with error -5

Here is the lspci -vnn output:

02:00.0 Ethernet controller [0200]: Atheros Communications, Inc.
AR5006EG 802.11 b/g Wireless PCI Express Adapter [168c:001c] (rev 01)
	Subsystem: Apple Computer Inc. Unknown device [106b:0086]
	Flags: fast devsel, IRQ 17
	Memory at 90100000 (64-bit, non-prefetchable) [disabled]
	[size=64K]
	Capabilities: [40] Power Management version 2
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit-
	Queue=0/0 Enable-
	Capabilities: [60] Express Legacy Endpoint, MSI 00
	Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
	Capabilities: [100] Advanced Error Reporting <?>
	Capabilities: [140] Virtual Channel <?>
	Kernel modules: ath5k

The same device works with madwifi:

ath_rate_sample: 1.2 (svn r3339)
MadWifi: ath_attach: Switching per-packet transmit power control off
wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: ath_announce: Use hw queue 1 for WME_AC_BE traffic
wifi0: ath_announce: Use hw queue 0 for WME_AC_BK traffic
wifi0: ath_announce: Use hw queue 2 for WME_AC_VI traffic
wifi0: ath_announce: Use hw queue 3 for WME_AC_VO traffic
wifi0: ath_announce: Use hw queue 8 for CAB traffic
wifi0: ath_announce: Use hw queue 9 for beacons
ath_pci: wifi0: Atheros 5424/2424: mem=0x90100000, irq=17

I can also set the interface up and use iwlist ath0 scan.

Regards,
Tino