[patch 14/23] via-velocity: dont oops on MTU change (resend)

[Greg KH <gregkh@suse.de>]

[-- Attachment #1: via-velocity-don-t-oops-on-mtu-change.patch --]
[-- Type: text/plain, Size: 1840 bytes --]


2.6.22-stable review patch.  If anyone has any objections, please let us
know.

------------------

From: Stephen Hemminger <shemminger@linux-foundation.org>

mainline: 48f6b053613b62fed7a2fe3255e5568260a8d615

The VIA veloicty driver needs the following to allow changing MTU when down.
The buffer size needs to be computed when device is brought up, not when
device is initialized.  This also fixes a bug where the buffer size was
computed differently on change_mtu versus initial setting.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Acked-by: Jeff Mahoney <jeffm@suse.com>
CC: Oliver Pinter <oliver.pntr@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/net/via-velocity.c |   11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -1075,6 +1075,9 @@ static int velocity_init_rd_ring(struct 
 	int ret = -ENOMEM;
 	unsigned int rsize = sizeof(struct velocity_rd_info) *
 					vptr->options.numrx;
+	int mtu = vptr->dev->mtu;
+
+	vptr->rx_buf_sz = (mtu <= ETH_DATA_LEN) ? PKT_BUF_SZ : mtu + 32;
 
 	vptr->rd_info = kmalloc(rsize, GFP_KERNEL);
 	if(vptr->rd_info == NULL)
@@ -1733,8 +1736,6 @@ static int velocity_open(struct net_devi
 	struct velocity_info *vptr = netdev_priv(dev);
 	int ret;
 
-	vptr->rx_buf_sz = (dev->mtu <= 1504 ? PKT_BUF_SZ : dev->mtu + 32);
-
 	ret = velocity_init_rings(vptr);
 	if (ret < 0)
 		goto out;
@@ -1813,12 +1814,6 @@ static int velocity_change_mtu(struct ne
 		velocity_free_rd_ring(vptr);
 
 		dev->mtu = new_mtu;
-		if (new_mtu > 8192)
-			vptr->rx_buf_sz = 9 * 1024;
-		else if (new_mtu > 4096)
-			vptr->rx_buf_sz = 8192;
-		else
-			vptr->rx_buf_sz = 4 * 1024;
 
 		ret = velocity_init_rd_ring(vptr);
 		if (ret < 0)

--