From: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: lkml <linux-kernel@vger.kernel.org>,
David Miller <davem@davemloft.net>,
Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>,
hskinnemoen@atmel.com, Ingo Molnar <mingo@elte.hu>,
Masami Hiramatsu <mhiramat@redhat.com>,
sam@ravnborg.org, sagar.abhishek@gmail.com
Subject: [PATCH 1/2] Kprobes: Indicate kretprobe support in Kconfig
Date: Mon, 25 Feb 2008 11:25:41 +0530 [thread overview]
Message-ID: <20080225055541.GE7148@in.ibm.com> (raw)
From: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
This patch adds CONFIG_HAVE_KRETPROBES to the arch/<arch>/Kconfig file
for relevant architectures with kprobes support. This facilitates easy
handling of in-kernel modules (like samples/kprobes/kretprobe_example.c)
that depend on kretprobes being present in the kernel.
Updated to apply on 2.6.25-rc3. Thanks to Sam Ravnborg for helping
make the patch more lean.
Per Mathieu's suggestion, added CONFIG_KRETPROBES and fixed up
dependencies.
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
---
arch/Kconfig | 7 +++++++
arch/arm/Kconfig | 1 +
arch/ia64/Kconfig | 1 +
arch/powerpc/Kconfig | 1 +
arch/s390/Kconfig | 1 +
arch/sparc64/Kconfig | 1 +
arch/x86/Kconfig | 1 +
include/asm-arm/kprobes.h | 1 -
include/asm-ia64/kprobes.h | 1 -
include/asm-powerpc/kprobes.h | 1 -
include/asm-s390/kprobes.h | 1 -
include/asm-sparc64/kprobes.h | 2 --
include/asm-x86/kprobes.h | 1 -
include/linux/kprobes.h | 6 +++---
kernel/kprobes.c | 9 +++------
15 files changed, 19 insertions(+), 16 deletions(-)
Index: linux-2.6.25-rc2/arch/Kconfig
===================================================================
--- linux-2.6.25-rc2.orig/arch/Kconfig
+++ linux-2.6.25-rc2/arch/Kconfig
@@ -27,5 +27,12 @@ config KPROBES
for kernel debugging, non-intrusive instrumentation and testing.
If in doubt, say "N".
+config KRETPROBES
+ def_bool y
+ depends on KPROBES && HAVE_KRETPROBES
+
config HAVE_KPROBES
def_bool n
+
+config HAVE_KRETPROBES
+ def_bool n
Index: linux-2.6.25-rc2/arch/ia64/Kconfig
===================================================================
--- linux-2.6.25-rc2.orig/arch/ia64/Kconfig
+++ linux-2.6.25-rc2/arch/ia64/Kconfig
@@ -18,6 +18,7 @@ config IA64
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_KPROBES
+ select HAVE_KRETPROBES
default y
help
The Itanium Processor Family is Intel's 64-bit successor to
Index: linux-2.6.25-rc2/arch/powerpc/Kconfig
===================================================================
--- linux-2.6.25-rc2.orig/arch/powerpc/Kconfig
+++ linux-2.6.25-rc2/arch/powerpc/Kconfig
@@ -90,6 +90,7 @@ config PPC
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_KPROBES
+ select HAVE_KRETPROBES
config EARLY_PRINTK
bool
Index: linux-2.6.25-rc2/arch/x86/Kconfig
===================================================================
--- linux-2.6.25-rc2.orig/arch/x86/Kconfig
+++ linux-2.6.25-rc2/arch/x86/Kconfig
@@ -21,6 +21,7 @@ config X86
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_KPROBES
+ select HAVE_KRETPROBES
select HAVE_KVM
Index: linux-2.6.25-rc2/include/asm-ia64/kprobes.h
===================================================================
--- linux-2.6.25-rc2.orig/include/asm-ia64/kprobes.h
+++ linux-2.6.25-rc2/include/asm-ia64/kprobes.h
@@ -82,7 +82,6 @@ struct kprobe_ctlblk {
struct prev_kprobe prev_kprobe[ARCH_PREV_KPROBE_SZ];
};
-#define ARCH_SUPPORTS_KRETPROBES
#define kretprobe_blacklist_size 0
#define SLOT0_OPCODE_SHIFT (37)
Index: linux-2.6.25-rc2/include/asm-powerpc/kprobes.h
===================================================================
--- linux-2.6.25-rc2.orig/include/asm-powerpc/kprobes.h
+++ linux-2.6.25-rc2/include/asm-powerpc/kprobes.h
@@ -80,7 +80,6 @@ typedef unsigned int kprobe_opcode_t;
#define is_trap(instr) (IS_TW(instr) || IS_TWI(instr))
#endif
-#define ARCH_SUPPORTS_KRETPROBES
#define flush_insn_slot(p) do { } while (0)
#define kretprobe_blacklist_size 0
Index: linux-2.6.25-rc2/include/asm-x86/kprobes.h
===================================================================
--- linux-2.6.25-rc2.orig/include/asm-x86/kprobes.h
+++ linux-2.6.25-rc2/include/asm-x86/kprobes.h
@@ -42,7 +42,6 @@ typedef u8 kprobe_opcode_t;
: (((unsigned long)current_thread_info()) + THREAD_SIZE \
- (unsigned long)(ADDR)))
-#define ARCH_SUPPORTS_KRETPROBES
#define flush_insn_slot(p) do { } while (0)
extern const int kretprobe_blacklist_size;
Index: linux-2.6.25-rc2/include/linux/kprobes.h
===================================================================
--- linux-2.6.25-rc2.orig/include/linux/kprobes.h
+++ linux-2.6.25-rc2/include/linux/kprobes.h
@@ -125,11 +125,11 @@ struct jprobe {
DECLARE_PER_CPU(struct kprobe *, current_kprobe);
DECLARE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
-#ifdef ARCH_SUPPORTS_KRETPROBES
+#ifdef CONFIG_KRETPROBES
extern void arch_prepare_kretprobe(struct kretprobe_instance *ri,
struct pt_regs *regs);
extern int arch_trampoline_kprobe(struct kprobe *p);
-#else /* ARCH_SUPPORTS_KRETPROBES */
+#else /* CONFIG_KRETPROBES */
static inline void arch_prepare_kretprobe(struct kretprobe *rp,
struct pt_regs *regs)
{
@@ -138,7 +138,7 @@ static inline int arch_trampoline_kprobe
{
return 0;
}
-#endif /* ARCH_SUPPORTS_KRETPROBES */
+#endif /* CONFIG_KRETPROBES */
/*
* Function-return probe -
* Note:
Index: linux-2.6.25-rc2/kernel/kprobes.c
===================================================================
--- linux-2.6.25-rc2.orig/kernel/kprobes.c
+++ linux-2.6.25-rc2/kernel/kprobes.c
@@ -678,8 +678,7 @@ void __kprobes unregister_jprobe(struct
unregister_kprobe(&jp->kp);
}
-#ifdef ARCH_SUPPORTS_KRETPROBES
-
+#ifdef CONFIG_KRETPROBES
/*
* This kprobe pre_handler is registered with every kretprobe. When probe
* hits it will set up the return probe.
@@ -769,8 +768,7 @@ int __kprobes register_kretprobe(struct
return ret;
}
-#else /* ARCH_SUPPORTS_KRETPROBES */
-
+#else /* CONFIG_KRETPROBES */
int __kprobes register_kretprobe(struct kretprobe *rp)
{
return -ENOSYS;
@@ -781,8 +779,7 @@ static int __kprobes pre_handler_kretpro
{
return 0;
}
-
-#endif /* ARCH_SUPPORTS_KRETPROBES */
+#endif /* CONFIG_KRETPROBES */
void __kprobes unregister_kretprobe(struct kretprobe *rp)
{
Index: linux-2.6.25-rc2/arch/s390/Kconfig
===================================================================
--- linux-2.6.25-rc2.orig/arch/s390/Kconfig
+++ linux-2.6.25-rc2/arch/s390/Kconfig
@@ -61,6 +61,7 @@ config S390
def_bool y
select HAVE_OPROFILE
select HAVE_KPROBES
+ select HAVE_KRETPROBES
source "init/Kconfig"
Index: linux-2.6.25-rc2/arch/arm/Kconfig
===================================================================
--- linux-2.6.25-rc2.orig/arch/arm/Kconfig
+++ linux-2.6.25-rc2/arch/arm/Kconfig
@@ -12,6 +12,7 @@ config ARM
select SYS_SUPPORTS_APM_EMULATION
select HAVE_OPROFILE
select HAVE_KPROBES if (!XIP_KERNEL)
+ select HAVE_KRETPROBES if (HAVE_KPROBES)
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
Index: linux-2.6.25-rc2/include/asm-arm/kprobes.h
===================================================================
--- linux-2.6.25-rc2.orig/include/asm-arm/kprobes.h
+++ linux-2.6.25-rc2/include/asm-arm/kprobes.h
@@ -20,7 +20,6 @@
#include <linux/ptrace.h>
#include <linux/percpu.h>
-#define ARCH_SUPPORTS_KRETPROBES
#define __ARCH_WANT_KPROBES_INSN_SLOT
#define MAX_INSN_SIZE 2
#define MAX_STACK_SIZE 64 /* 32 would probably be OK */
Index: linux-2.6.25-rc2/include/asm-s390/kprobes.h
===================================================================
--- linux-2.6.25-rc2.orig/include/asm-s390/kprobes.h
+++ linux-2.6.25-rc2/include/asm-s390/kprobes.h
@@ -46,7 +46,6 @@ typedef u16 kprobe_opcode_t;
? (MAX_STACK_SIZE) \
: (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR)))
-#define ARCH_SUPPORTS_KRETPROBES
#define kretprobe_blacklist_size 0
#define KPROBE_SWAP_INST 0x10
Index: linux-2.6.25-rc2/arch/sparc64/Kconfig
===================================================================
--- linux-2.6.25-rc2.orig/arch/sparc64/Kconfig
+++ linux-2.6.25-rc2/arch/sparc64/Kconfig
@@ -10,6 +10,7 @@ config SPARC
default y
select HAVE_OPROFILE
select HAVE_KPROBES
+ select HAVE_KRETPROBES
config SPARC64
bool
Index: linux-2.6.25-rc2/include/asm-sparc64/kprobes.h
===================================================================
--- linux-2.6.25-rc2.orig/include/asm-sparc64/kprobes.h
+++ linux-2.6.25-rc2/include/asm-sparc64/kprobes.h
@@ -14,8 +14,6 @@ typedef u32 kprobe_opcode_t;
#define arch_remove_kprobe(p) do {} while (0)
-#define ARCH_SUPPORTS_KRETPROBES
-
#define flush_insn_slot(p) \
do { flushi(&(p)->ainsn.insn[0]); \
flushi(&(p)->ainsn.insn[1]); \
next reply other threads:[~2008-02-25 5:55 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-25 5:55 Ananth N Mavinakayanahalli [this message]
2008-02-25 5:57 ` [PATCH 2/2] Kprobes: Move kprobe examples to samples/ Ananth N Mavinakayanahalli
2008-02-25 7:38 ` [PATCH 1/2] Kprobes: Indicate kretprobe support in Kconfig Ingo Molnar
-- strict thread matches above, loose matches on Subject: below --
2008-02-05 5:10 Ananth N Mavinakayanahalli
2008-01-03 6:24 Ananth N Mavinakayanahalli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080225055541.GE7148@in.ibm.com \
--to=ananth@in.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=davem@davemloft.net \
--cc=hskinnemoen@atmel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mathieu.desnoyers@polymtl.ca \
--cc=mhiramat@redhat.com \
--cc=mingo@elte.hu \
--cc=sagar.abhishek@gmail.com \
--cc=sam@ravnborg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox