From: Len Brown <lenb@kernel.org>
To: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Andrew Morton <akpm@linux-foundation.org>,
LKML <linux-kernel@vger.kernel.org>, Pavel Machek <pavel@ucw.cz>,
pm list <linux-pm@lists.linux-foundation.org>
Subject: Re: [PATCH] Hibernation: Fix mark_nosave_pages()
Date: Tue, 11 Mar 2008 23:21:55 -0400 [thread overview]
Message-ID: <200803112321.55618.lenb@kernel.org> (raw)
In-Reply-To: <200803120034.58615.rjw@sisk.pl>
applied to acpi test tree.
thanks,
-len
On Tuesday 11 March 2008, Rafael J. Wysocki wrote:
> Hi Len,
>
> The following patch fixes http://bugzilla.kernel.org/show_bug.cgi?id=9966 .
>
> Although the problem has been there for quite some time (since before 2.6.22,
> apparently), it would be good to have in 2.6.25, because it may fix booting
> problems on the affected systems.
>
> Please note that it doesn't modify the code behavior on the systems which are
> not affected by bug #9966 .
>
> Thanks,
> Rafael
>
>
> ---
> From: Rafael J. Wysocki <rjw@sisk.pl>
>
> There is a problem in the hibernation code that triggers on some NUMA
> systems on which pfn_valid() returns 'true' for some PFNs that don't
> belong to any zone. Namely, there is a BUG_ON() in
> memory_bm_find_bit() that triggers for PFNs not belonging to any
> zone and passing the pfn_valid() test. On the affected systems it
> triggers when we mark PFNs reported by the platform as not saveable,
> because the PFNs in question belong to a region mapped directly using
> iorepam() (i.e. the ACPI data area) and they pass the pfn_valid()
> test.
>
> Modify memory_bm_find_bit() so that it returns an error if given PFN
> doesn't belong to any zone instead of crashing the kernel and ignore
> the result returned by it in mark_nosave_pages(), while marking the
> "nosave" memory regions.
>
> This doesn't affect the hibernation functionality, as we won't touch
> the PFNs in question anyway.
>
> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
> ---
> kernel/power/snapshot.c | 41 ++++++++++++++++++++++++++++++++++-------
> 1 file changed, 34 insertions(+), 7 deletions(-)
>
> Index: linux-2.6/kernel/power/snapshot.c
> ===================================================================
> --- linux-2.6.orig/kernel/power/snapshot.c
> +++ linux-2.6/kernel/power/snapshot.c
> @@ -447,7 +447,7 @@ static void memory_bm_free(struct memory
> * of @bm->cur_zone_bm are updated.
> */
>
> -static void memory_bm_find_bit(struct memory_bitmap *bm, unsigned long pfn,
> +static int memory_bm_find_bit(struct memory_bitmap *bm, unsigned long pfn,
> void **addr, unsigned int *bit_nr)
> {
> struct zone_bitmap *zone_bm;
> @@ -461,7 +461,8 @@ static void memory_bm_find_bit(struct me
> while (pfn < zone_bm->start_pfn || pfn >= zone_bm->end_pfn) {
> zone_bm = zone_bm->next;
>
> - BUG_ON(!zone_bm);
> + if (!zone_bm)
> + return -EFAULT;
> }
> bm->cur.zone_bm = zone_bm;
> }
> @@ -479,23 +480,40 @@ static void memory_bm_find_bit(struct me
> pfn -= bb->start_pfn;
> *bit_nr = pfn % BM_BITS_PER_CHUNK;
> *addr = bb->data + pfn / BM_BITS_PER_CHUNK;
> + return 0;
> }
>
> static void memory_bm_set_bit(struct memory_bitmap *bm, unsigned long pfn)
> {
> void *addr;
> unsigned int bit;
> + int error;
>
> - memory_bm_find_bit(bm, pfn, &addr, &bit);
> + error = memory_bm_find_bit(bm, pfn, &addr, &bit);
> + BUG_ON(error);
> set_bit(bit, addr);
> }
>
> +static int mem_bm_set_bit_check(struct memory_bitmap *bm, unsigned long pfn)
> +{
> + void *addr;
> + unsigned int bit;
> + int error;
> +
> + error = memory_bm_find_bit(bm, pfn, &addr, &bit);
> + if (!error)
> + set_bit(bit, addr);
> + return error;
> +}
> +
> static void memory_bm_clear_bit(struct memory_bitmap *bm, unsigned long pfn)
> {
> void *addr;
> unsigned int bit;
> + int error;
>
> - memory_bm_find_bit(bm, pfn, &addr, &bit);
> + error = memory_bm_find_bit(bm, pfn, &addr, &bit);
> + BUG_ON(error);
> clear_bit(bit, addr);
> }
>
> @@ -503,8 +521,10 @@ static int memory_bm_test_bit(struct mem
> {
> void *addr;
> unsigned int bit;
> + int error;
>
> - memory_bm_find_bit(bm, pfn, &addr, &bit);
> + error = memory_bm_find_bit(bm, pfn, &addr, &bit);
> + BUG_ON(error);
> return test_bit(bit, addr);
> }
>
> @@ -709,8 +729,15 @@ static void mark_nosave_pages(struct mem
> region->end_pfn << PAGE_SHIFT);
>
> for (pfn = region->start_pfn; pfn < region->end_pfn; pfn++)
> - if (pfn_valid(pfn))
> - memory_bm_set_bit(bm, pfn);
> + if (pfn_valid(pfn)) {
> + /*
> + * It is safe to ignore the result of
> + * mem_bm_set_bit_check() here, since we won't
> + * touch the PFNs for which the error is
> + * returned anyway.
> + */
> + mem_bm_set_bit_check(bm, pfn);
> + }
> }
> }
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
next prev parent reply other threads:[~2008-03-12 3:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-11 23:34 [PATCH] Hibernation: Fix mark_nosave_pages() Rafael J. Wysocki
2008-03-12 3:21 ` Len Brown [this message]
2008-03-13 7:46 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200803112321.55618.lenb@kernel.org \
--to=lenb@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@lists.linux-foundation.org \
--cc=pavel@ucw.cz \
--cc=rjw@sisk.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox