From: Andrew Morton <akpm@linux-foundation.org>
To: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org,
Andy Whitcroft <apw@shadowen.org>,
Matthew Wilcox <matthew@wil.cx>
Subject: Re: [BUG] 2.6.25-rc5-mm1 kernel panic with "Exception: 501 " on powerpc
Date: Wed, 12 Mar 2008 10:46:45 -0700 [thread overview]
Message-ID: <20080312104645.34e58319.akpm@linux-foundation.org> (raw)
In-Reply-To: <47D7D2C9.4090001@linux.vnet.ibm.com>
On Wed, 12 Mar 2008 18:25:37 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
> Hi Andrew,
>
> The 2.6.25-rc5-mm1 kernel panics while bootup on powerpc
>
> returning from prom_init
> Unable to handle kernel paging request for data at address 0x00000000
> Faulting instruction address: 0xc00000000000d5dc
> cpu 0x0: Vector: 300 (Data Access) at [c0000000007636e0]
> pc: c00000000000d5dc: .do_IRQ+0x74/0x1f4
> lr: c00000000000d5a8: .do_IRQ+0x40/0x1f4
> sp: c000000000763960
> msr: 8000000000001032
> dar: 0
> dsisr: 40000000
> current = 0xc000000000688e60
> paca = 0xc000000000689900
> pid = 0, comm = swapper
> enter ? for help
> [c000000000763a00] c000000000004c24 hardware_interrupt_entry+0x24/0x28
> --- Exception: 501 (Hardware Interrupt) at c0000000006021b0 .free_bootmem_core+0x94/0xcc
> [link register ] c00000000060373c .free_bootmem_with_active_regions+0x78/0xb8
> [c000000000763cf0] c000000000602610 .init_bootmem_core+0x5c/0xfc (unreliable)
> [c000000000763d80] c0000000005eb68c .do_init_bootmem+0x964/0xaf0
> [c000000000763e50] c0000000005e03b0 .setup_arch+0x1a4/0x218
> [c000000000763ee0] c0000000005d76bc .start_kernel+0xe8/0x424
> [c000000000763f90] c000000000008590 .start_here_common+0x60/0xd0
>
Beats me. Maybe we're still enabling interrupts too early. But the new
semaphore code got fixed (didn't it?)
next prev parent reply other threads:[~2008-03-12 17:47 UTC|newest]
Thread overview: 116+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-11 8:14 2.6.25-rc5-mm1 Andrew Morton
2008-03-11 10:16 ` [Build Faliure] 2.6.25-rc5-mm1 build fails Kamalesh Babulal
2008-03-11 10:56 ` Edward Shishkin
2008-03-11 12:55 ` [Build Failure] 2.6.25-rc5-mm1 Build fails with allmodconfig probe_4drives undefined Kamalesh Babulal
2008-03-11 17:41 ` Andrew Morton
2008-03-11 19:35 ` Bartlomiej Zolnierkiewicz
2008-03-11 18:19 ` Andrew Morton
2008-03-11 19:36 ` Bartlomiej Zolnierkiewicz
2008-03-11 17:09 ` 2.6.25-rc5-mm1 (paravirt/vsmp/no PCI) Randy Dunlap
2008-03-11 18:18 ` Jeremy Fitzhardinge
2008-03-12 0:10 ` Ravikiran G Thirumalai
2008-03-12 1:42 ` Randy Dunlap
2008-03-12 1:51 ` Jeremy Fitzhardinge
2008-03-12 7:14 ` Ingo Molnar
2008-03-11 20:23 ` 2.6.25-rc5-mm1 serge
2008-03-11 20:39 ` 2.6.25-rc5-mm1 Andrew Morton
2008-03-12 19:33 ` 2.6.25-rc5-mm1 Torsten Kaiser
2008-03-12 19:44 ` 2.6.25-rc5-mm1 Andrew Morton
2008-03-12 20:01 ` 2.6.25-rc5-mm1 Torsten Kaiser
2008-03-13 22:05 ` 2.6.25-rc5-mm1 Torsten Kaiser
2008-03-13 22:35 ` 2.6.25-rc5-mm1 Andrew Morton
2008-03-13 23:10 ` 2.6.25-rc5-mm1 Badari Pulavarty
2008-03-21 12:12 ` 2.6.25-rc5-mm1 Ingo Molnar
2008-03-12 1:14 ` 2.6.25-rc5-mm1 Dave Young
2008-03-12 7:21 ` 2.6.25-rc5-mm1: NO_HZ=Y && PREEMPT_RCU=Y fails to build Laurent Riffard
2008-03-12 7:44 ` Andrew Morton
2008-03-12 21:32 ` Laurent Riffard
2008-03-12 23:43 ` Tilman Schmidt
2008-03-12 9:17 ` [BUILD_FAILURE] 2.6.25-rc5-mm1 build fails at startup_ipi_hook() with randconfig Kamalesh Babulal
2008-03-12 12:55 ` [BUG] 2.6.25-rc5-mm1 kernel panic with "Exception: 501 " on powerpc Kamalesh Babulal
2008-03-12 17:46 ` Andrew Morton [this message]
2008-03-12 17:51 ` Matthew Wilcox
2008-03-12 22:26 ` Michael Ellerman
2008-03-12 22:33 ` Matthew Wilcox
2008-03-13 13:02 ` Kamalesh Babulal
2008-03-12 20:40 ` Benjamin Herrenschmidt
2008-03-12 18:14 ` Badari Pulavarty
2008-03-12 18:10 ` 2.6.25-rc5-mm1 - x86_64 boot problem ? Badari Pulavarty
2008-03-12 18:15 ` Andrew Morton
2008-03-13 17:09 ` 2.6.25-rc5-mm1 - x86_64 boot problem with git-sched.patch Badari Pulavarty
2008-03-13 17:40 ` Badari Pulavarty
2008-03-13 17:55 ` Guillaume Chazarain
2008-03-13 18:20 ` Badari Pulavarty
2008-03-12 23:54 ` [2.6.25-rc5-mm1] BUG: spinlock bad magic early during boot Tilman Schmidt
2008-03-13 0:04 ` Andrew Morton
2008-03-13 21:48 ` Dave Hansen
2008-03-13 20:46 ` Dave Hansen
2008-03-14 0:35 ` Tilman Schmidt
2008-03-14 18:03 ` Dave Hansen
2008-03-14 20:06 ` Dave Hansen
2008-03-14 20:20 ` Linus Torvalds
2008-03-14 20:51 ` Eric Piel
2008-03-14 21:35 ` Dave Hansen
2008-03-14 22:50 ` Eric Piel
2008-03-14 23:29 ` Dave Hansen
2008-03-15 12:47 ` Tilman Schmidt
2008-03-15 19:21 ` Linus Torvalds
2008-03-15 19:42 ` Éric Piel
2008-03-15 20:19 ` Linus Torvalds
2008-03-16 0:15 ` Éric Piel
2008-03-17 17:27 ` Len Brown
[not found] ` <1205858252.21619.233.camel@queen.suse.de>
2008-03-18 20:32 ` Len Brown
2008-03-20 14:28 ` Thomas Renninger
2008-03-17 17:59 ` Len Brown
2008-03-21 13:17 ` Pavel Machek
2008-03-23 16:00 ` Dave Hansen
2008-03-24 16:03 ` Pavel Machek
2008-03-24 17:05 ` Eric Piel
2008-03-24 17:19 ` Pavel Machek
2008-03-24 17:23 ` Dave Hansen
2008-03-27 9:23 ` Helge Hafting
2008-03-17 18:05 ` Len Brown
2008-03-16 20:11 ` Dave Hansen
2008-03-17 12:23 ` Peter Zijlstra
2008-03-19 23:50 ` Tilman Schmidt
2008-03-17 17:48 ` Len Brown
2008-03-13 0:15 ` [2.6.25-rc5-mm1] WARNING: at drivers/base/sys.c:173 Tilman Schmidt
2008-03-13 18:34 ` Greg KH
2008-03-13 19:57 ` Dave Jones
2008-03-13 19:56 ` Dave Jones
2008-03-13 20:27 ` Greg KH
2008-03-14 0:01 ` Tilman Schmidt
2008-03-14 0:44 ` Dave Jones
2008-03-14 0:57 ` Zhao Yakui
2008-03-14 9:58 ` Tilman Schmidt
2008-03-15 12:16 ` Tilman Schmidt
2008-03-13 14:03 ` 2.6.25-rc5-mm1 shutdown crash Helge Hafting
2008-03-13 16:12 ` Andrew Morton
2008-03-25 12:23 ` Helge Hafting
2008-03-13 19:48 ` [2.6.25-rc5-mm1] regression: cannot run Postfix sendmail command as non-root Tilman Schmidt
2008-03-13 22:21 ` Daniel Lezcano
2008-03-14 0:08 ` Tilman Schmidt
2008-03-17 10:44 ` Daniel Lezcano
2008-03-17 12:50 ` Benjamin Thery
2008-03-17 13:35 ` Tilman Schmidt
2008-03-17 13:06 ` Tilman Schmidt
2008-03-17 13:17 ` Daniel Lezcano
2008-03-19 17:52 ` Benjamin Thery
2008-03-19 21:16 ` Andrew Morton
2008-03-19 22:14 ` Benjamin Thery
2008-03-19 22:49 ` David Miller
2008-03-20 8:26 ` Benjamin Thery
2008-03-20 10:21 ` Rafael J. Wysocki
2008-03-20 12:52 ` Pavel Emelyanov
2008-03-20 13:48 ` Benjamin Thery
2008-03-20 14:38 ` Rafael J. Wysocki
2008-03-19 23:31 ` Tilman Schmidt
2008-03-13 22:07 ` 2.6.25-rc5-mm1: "consolechars" hangs on boot Laurent Riffard
2008-03-13 22:38 ` Andrew Morton
2008-03-14 5:26 ` Oleg Nesterov
2008-03-14 21:06 ` Laurent Riffard
2008-03-15 12:03 ` Oleg Nesterov
2008-03-16 21:38 ` 2.6.25-rc5-mm1 build failure of pcsp.c Mariusz Kozlowski
2008-03-28 22:52 ` 2.6.25-rc5-mm1 sparc64 boot problems due to generic pci_enable_resources() Mariusz Kozlowski
2008-03-28 23:10 ` David Miller
2008-03-29 0:44 ` Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080312104645.34e58319.akpm@linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=apw@shadowen.org \
--cc=kamalesh@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=matthew@wil.cx \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox