From: Dave Jones <davej@codemonkey.org.uk>
To: Tilman Schmidt <tilman@imap.cc>
Cc: Andrew Morton <akpm@linux-foundation.org>,
linux-kernel@vger.kernel.org, Greg Kroah-Hartman <gregkh@suse.de>
Subject: Re: [2.6.25-rc5-mm1] WARNING: at drivers/base/sys.c:173
Date: Thu, 13 Mar 2008 15:56:56 -0400 [thread overview]
Message-ID: <20080313195656.GA32463@codemonkey.org.uk> (raw)
In-Reply-To: <47D87238.8080305@imap.cc>
On Thu, Mar 13, 2008 at 01:15:52AM +0100, Tilman Schmidt wrote:
> Am 11.03.2008 09:14 schrieb Andrew Morton:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.25-rc5/2.6.25-rc5-mm1/
>
> Late during boot, this issues the following warning on my Pentium D,
> apparently when trying to load an appropriate CPU frequency driver:
>
> [ 56.759128] ------------[ cut here ]------------
> [ 56.765058] WARNING: at drivers/base/sys.c:173 sysdev_driver_register+0x34/0xce()
> [ 56.776027] Modules linked in: acpi_cpufreq(+) speedstep_lib ip6table_filter ip6_tables x_tables ipv6 microcode firmware_class loop osst st sr_mod cdrom pata_acpi bas_gigaset snd_hda_intel gigaset isdn snd_pcm ata_generic<6>ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 56.785293] snd_timer aic7xxx slhc snd ohci1394 rtc_cmos ieee1394 shpchp crc_ccitt iTCO_wdt e1000e rtc_core iTCO_vendor_support soundcore scsi_transport_spi watchdog_core pci_hotplug intel_agp button thermal agpgart rtc_lib processor i2c_i801 watchdog_dev parport_pc i2c_core snd_page_alloc parport pata_marvell sg ext3 jbd mbcache linear sd_mod usbhid hid ff_memless ahci libata scsi_mod ehci_hcd uhci_hcd usbcore dm_snapshot dm_mod
> [ 56.805358] Pid: 2856, comm: modprobe Not tainted 2.6.25-rc5-mm1-testing #1
> [ 56.810766] [<c01272e9>] warn_on_slowpath+0x41/0x6d
> [ 56.820628] [<c0230065>] ? acpi_ns_lookup+0x2b5/0x497
> [ 56.830455] [<c0230e25>] ? acpi_evaluate_object+0x23e/0x249
> [ 56.840414] [<c02ff809>] ? mutex_unlock+0x8/0xa
> [ 56.848380] [<fa9fec1d>] ? acpi_processor_preregister_performance+0x4e6/0x4f1 [processor]
> [ 56.858297] [<c0286438>] ? cpufreq_register_driver+0x42/0xfc
> [ 56.868263] [<c026423d>] sysdev_driver_register+0x34/0xce
> [ 56.877974] [<c0286476>] cpufreq_register_driver+0x80/0xfc
> [ 56.887327] [<facde034>] acpi_cpufreq_init+0x34/0x3a [acpi_cpufreq]
> [ 56.897290] [<c014ad7a>] sys_init_module+0x1816/0x1943
> [ 56.907304] [<facb5000>] ? icmp_checkentry+0x0/0x14 [ip_tables]
> [ 56.917255] [<c0183cd2>] ? sys_read+0x3b/0x60
> [ 56.925094] [<c0106aec>] sysenter_past_esp+0x6d/0xc5
> [ 56.935071] =======================
> [ 56.945016] ---[ end trace 9ade9adb26b6da0a ]---
>
> Looking back, -rc3-mm1 did that too.
> Mainline (-rc3 through -rc5) never did.
> Let me know if you need more information.
> CCing Dave Jones for cpufreq and Greg KH for sysdev.
Full dmesg please, with CPU_FREQ_DEBUG=y, and boot with cpufreq.debug=7
Greg, could that warning be enhanced to print the object->name ?
Dave
--
http://www.codemonkey.org.uk
next prev parent reply other threads:[~2008-03-13 19:57 UTC|newest]
Thread overview: 116+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-11 8:14 2.6.25-rc5-mm1 Andrew Morton
2008-03-11 10:16 ` [Build Faliure] 2.6.25-rc5-mm1 build fails Kamalesh Babulal
2008-03-11 10:56 ` Edward Shishkin
2008-03-11 12:55 ` [Build Failure] 2.6.25-rc5-mm1 Build fails with allmodconfig probe_4drives undefined Kamalesh Babulal
2008-03-11 17:41 ` Andrew Morton
2008-03-11 19:35 ` Bartlomiej Zolnierkiewicz
2008-03-11 18:19 ` Andrew Morton
2008-03-11 19:36 ` Bartlomiej Zolnierkiewicz
2008-03-11 17:09 ` 2.6.25-rc5-mm1 (paravirt/vsmp/no PCI) Randy Dunlap
2008-03-11 18:18 ` Jeremy Fitzhardinge
2008-03-12 0:10 ` Ravikiran G Thirumalai
2008-03-12 1:42 ` Randy Dunlap
2008-03-12 1:51 ` Jeremy Fitzhardinge
2008-03-12 7:14 ` Ingo Molnar
2008-03-11 20:23 ` 2.6.25-rc5-mm1 serge
2008-03-11 20:39 ` 2.6.25-rc5-mm1 Andrew Morton
2008-03-12 19:33 ` 2.6.25-rc5-mm1 Torsten Kaiser
2008-03-12 19:44 ` 2.6.25-rc5-mm1 Andrew Morton
2008-03-12 20:01 ` 2.6.25-rc5-mm1 Torsten Kaiser
2008-03-13 22:05 ` 2.6.25-rc5-mm1 Torsten Kaiser
2008-03-13 22:35 ` 2.6.25-rc5-mm1 Andrew Morton
2008-03-13 23:10 ` 2.6.25-rc5-mm1 Badari Pulavarty
2008-03-21 12:12 ` 2.6.25-rc5-mm1 Ingo Molnar
2008-03-12 1:14 ` 2.6.25-rc5-mm1 Dave Young
2008-03-12 7:21 ` 2.6.25-rc5-mm1: NO_HZ=Y && PREEMPT_RCU=Y fails to build Laurent Riffard
2008-03-12 7:44 ` Andrew Morton
2008-03-12 21:32 ` Laurent Riffard
2008-03-12 23:43 ` Tilman Schmidt
2008-03-12 9:17 ` [BUILD_FAILURE] 2.6.25-rc5-mm1 build fails at startup_ipi_hook() with randconfig Kamalesh Babulal
2008-03-12 12:55 ` [BUG] 2.6.25-rc5-mm1 kernel panic with "Exception: 501 " on powerpc Kamalesh Babulal
2008-03-12 17:46 ` Andrew Morton
2008-03-12 17:51 ` Matthew Wilcox
2008-03-12 22:26 ` Michael Ellerman
2008-03-12 22:33 ` Matthew Wilcox
2008-03-13 13:02 ` Kamalesh Babulal
2008-03-12 20:40 ` Benjamin Herrenschmidt
2008-03-12 18:14 ` Badari Pulavarty
2008-03-12 18:10 ` 2.6.25-rc5-mm1 - x86_64 boot problem ? Badari Pulavarty
2008-03-12 18:15 ` Andrew Morton
2008-03-13 17:09 ` 2.6.25-rc5-mm1 - x86_64 boot problem with git-sched.patch Badari Pulavarty
2008-03-13 17:40 ` Badari Pulavarty
2008-03-13 17:55 ` Guillaume Chazarain
2008-03-13 18:20 ` Badari Pulavarty
2008-03-12 23:54 ` [2.6.25-rc5-mm1] BUG: spinlock bad magic early during boot Tilman Schmidt
2008-03-13 0:04 ` Andrew Morton
2008-03-13 21:48 ` Dave Hansen
2008-03-13 20:46 ` Dave Hansen
2008-03-14 0:35 ` Tilman Schmidt
2008-03-14 18:03 ` Dave Hansen
2008-03-14 20:06 ` Dave Hansen
2008-03-14 20:20 ` Linus Torvalds
2008-03-14 20:51 ` Eric Piel
2008-03-14 21:35 ` Dave Hansen
2008-03-14 22:50 ` Eric Piel
2008-03-14 23:29 ` Dave Hansen
2008-03-15 12:47 ` Tilman Schmidt
2008-03-15 19:21 ` Linus Torvalds
2008-03-15 19:42 ` Éric Piel
2008-03-15 20:19 ` Linus Torvalds
2008-03-16 0:15 ` Éric Piel
2008-03-17 17:27 ` Len Brown
[not found] ` <1205858252.21619.233.camel@queen.suse.de>
2008-03-18 20:32 ` Len Brown
2008-03-20 14:28 ` Thomas Renninger
2008-03-17 17:59 ` Len Brown
2008-03-21 13:17 ` Pavel Machek
2008-03-23 16:00 ` Dave Hansen
2008-03-24 16:03 ` Pavel Machek
2008-03-24 17:05 ` Eric Piel
2008-03-24 17:19 ` Pavel Machek
2008-03-24 17:23 ` Dave Hansen
2008-03-27 9:23 ` Helge Hafting
2008-03-17 18:05 ` Len Brown
2008-03-16 20:11 ` Dave Hansen
2008-03-17 12:23 ` Peter Zijlstra
2008-03-19 23:50 ` Tilman Schmidt
2008-03-17 17:48 ` Len Brown
2008-03-13 0:15 ` [2.6.25-rc5-mm1] WARNING: at drivers/base/sys.c:173 Tilman Schmidt
2008-03-13 18:34 ` Greg KH
2008-03-13 19:57 ` Dave Jones
2008-03-13 19:56 ` Dave Jones [this message]
2008-03-13 20:27 ` Greg KH
2008-03-14 0:01 ` Tilman Schmidt
2008-03-14 0:44 ` Dave Jones
2008-03-14 0:57 ` Zhao Yakui
2008-03-14 9:58 ` Tilman Schmidt
2008-03-15 12:16 ` Tilman Schmidt
2008-03-13 14:03 ` 2.6.25-rc5-mm1 shutdown crash Helge Hafting
2008-03-13 16:12 ` Andrew Morton
2008-03-25 12:23 ` Helge Hafting
2008-03-13 19:48 ` [2.6.25-rc5-mm1] regression: cannot run Postfix sendmail command as non-root Tilman Schmidt
2008-03-13 22:21 ` Daniel Lezcano
2008-03-14 0:08 ` Tilman Schmidt
2008-03-17 10:44 ` Daniel Lezcano
2008-03-17 12:50 ` Benjamin Thery
2008-03-17 13:35 ` Tilman Schmidt
2008-03-17 13:06 ` Tilman Schmidt
2008-03-17 13:17 ` Daniel Lezcano
2008-03-19 17:52 ` Benjamin Thery
2008-03-19 21:16 ` Andrew Morton
2008-03-19 22:14 ` Benjamin Thery
2008-03-19 22:49 ` David Miller
2008-03-20 8:26 ` Benjamin Thery
2008-03-20 10:21 ` Rafael J. Wysocki
2008-03-20 12:52 ` Pavel Emelyanov
2008-03-20 13:48 ` Benjamin Thery
2008-03-20 14:38 ` Rafael J. Wysocki
2008-03-19 23:31 ` Tilman Schmidt
2008-03-13 22:07 ` 2.6.25-rc5-mm1: "consolechars" hangs on boot Laurent Riffard
2008-03-13 22:38 ` Andrew Morton
2008-03-14 5:26 ` Oleg Nesterov
2008-03-14 21:06 ` Laurent Riffard
2008-03-15 12:03 ` Oleg Nesterov
2008-03-16 21:38 ` 2.6.25-rc5-mm1 build failure of pcsp.c Mariusz Kozlowski
2008-03-28 22:52 ` 2.6.25-rc5-mm1 sparc64 boot problems due to generic pci_enable_resources() Mariusz Kozlowski
2008-03-28 23:10 ` David Miller
2008-03-29 0:44 ` Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080313195656.GA32463@codemonkey.org.uk \
--to=davej@codemonkey.org.uk \
--cc=akpm@linux-foundation.org \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=tilman@imap.cc \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox