From: Yinghai Lu <yhlu.kernel.send@gmail.com>
To: Andrew Morton <akpm@linux-foundation.org>, Ingo Molnar <mingo@elte.hu>
Cc: Christoph Lameter <clameter@sgi.com>,
kernel list <linux-kernel@vger.kernel.org>
Subject: [PATCH 07/12] mm: offset align in alloc_bootmem v3
Date: Wed, 19 Mar 2008 14:04:23 -0700 [thread overview]
Message-ID: <200803191404.23430.yhlu.kernel@gmail.com> (raw)
In-Reply-To: <200803181237.33861.yhlu.kernel@gmail.com>
[PATCH] mm: offset align in alloc_bootmem v3
need offset alignment when node_boot_start's alignment is less than
align required
use local node_boot_start to match align. so don't add extra opteration in
search loop.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Index: linux-2.6/mm/bootmem.c
===================================================================
--- linux-2.6.orig/mm/bootmem.c
+++ linux-2.6/mm/bootmem.c
@@ -206,9 +206,11 @@ void * __init
__alloc_bootmem_core(struct bootmem_data *bdata, unsigned long size,
unsigned long align, unsigned long goal, unsigned long limit)
{
- unsigned long offset, remaining_size, areasize, preferred;
+ unsigned long areasize, preferred;
unsigned long i, start = 0, incr, eidx, end_pfn;
void *ret;
+ unsigned long node_boot_start;
+ void *node_bootmem_map;
if (!size) {
printk("__alloc_bootmem_core(): zero-sized request\n");
@@ -216,23 +218,29 @@ __alloc_bootmem_core(struct bootmem_data
}
BUG_ON(align & (align-1));
- if (limit && bdata->node_boot_start >= limit)
- return NULL;
-
/* on nodes without memory - bootmem_map is NULL */
if (!bdata->node_bootmem_map)
return NULL;
+ /* bdata->node_boot_start is supposed to be (12+6)bits alignment on x86_64 ? */
+ node_boot_start = bdata->node_boot_start;
+ node_bootmem_map = bdata->node_bootmem_map;
+ if (align) {
+ node_boot_start = ALIGN(bdata->node_boot_start, align);
+ if (node_boot_start > bdata->node_boot_start)
+ node_bootmem_map = (unsigned long *)bdata->node_bootmem_map +
+ PFN_DOWN(node_boot_start - bdata->node_boot_start)/BITS_PER_LONG;
+ }
+
+ if (limit && node_boot_start >= limit)
+ return NULL;
+
end_pfn = bdata->node_low_pfn;
limit = PFN_DOWN(limit);
if (limit && end_pfn > limit)
end_pfn = limit;
- eidx = end_pfn - PFN_DOWN(bdata->node_boot_start);
- offset = 0;
- if (align && (bdata->node_boot_start & (align - 1UL)) != 0)
- offset = align - (bdata->node_boot_start & (align - 1UL));
- offset = PFN_DOWN(offset);
+ eidx = end_pfn - PFN_DOWN(node_boot_start);
/*
* We try to allocate bootmem pages above 'goal'
@@ -240,15 +248,16 @@ __alloc_bootmem_core(struct bootmem_data
*/
preferred = 0;
if (goal && PFN_DOWN(goal) < end_pfn) {
- if (goal > bdata->node_boot_start)
- preferred = goal - bdata->node_boot_start;
+ if (goal > node_boot_start)
+ preferred = goal - node_boot_start;
- if (bdata->last_success >= preferred)
+ if (bdata->last_success > node_boot_start &&
+ bdata->last_success - node_boot_start >= preferred)
if (!limit || (limit && limit > bdata->last_success))
- preferred = bdata->last_success;
+ preferred = bdata->last_success - node_boot_start;
}
- preferred = PFN_DOWN(ALIGN(preferred, align)) + offset;
+ preferred = PFN_DOWN(ALIGN(preferred, align));
areasize = (size + PAGE_SIZE-1) / PAGE_SIZE;
incr = align >> PAGE_SHIFT ? : 1;
@@ -256,18 +265,18 @@ restart_scan:
for (i = preferred; i < eidx;) {
unsigned long j;
- i = find_next_zero_bit(bdata->node_bootmem_map, eidx, i);
+ i = find_next_zero_bit(node_bootmem_map, eidx, i);
i = ALIGN(i, incr);
if (i >= eidx)
break;
- if (test_bit(i, bdata->node_bootmem_map)) {
+ if (test_bit(i, node_bootmem_map)) {
i += incr;
continue;
}
for (j = i + 1; j < i + areasize; ++j) {
if (j >= eidx)
goto fail_block;
- if (test_bit(j, bdata->node_bootmem_map))
+ if (test_bit(j, node_bootmem_map))
goto fail_block;
}
start = i;
@@ -278,14 +287,14 @@ restart_scan:
i += incr;
}
- if (preferred > offset) {
- preferred = offset;
+ if (preferred > 0) {
+ preferred = 0;
goto restart_scan;
}
return NULL;
found:
- bdata->last_success = PFN_PHYS(start);
+ bdata->last_success = PFN_PHYS(start) + node_boot_start;
BUG_ON(start >= eidx);
/*
@@ -295,6 +304,7 @@ found:
*/
if (align < PAGE_SIZE &&
bdata->last_offset && bdata->last_pos+1 == start) {
+ unsigned long offset, remaining_size;
offset = ALIGN(bdata->last_offset, align);
BUG_ON(offset > PAGE_SIZE);
remaining_size = PAGE_SIZE - offset;
@@ -303,14 +313,12 @@ found:
/* last_pos unchanged */
bdata->last_offset = offset + size;
ret = phys_to_virt(bdata->last_pos * PAGE_SIZE +
- offset +
- bdata->node_boot_start);
+ offset + node_boot_start);
} else {
remaining_size = size - remaining_size;
areasize = (remaining_size + PAGE_SIZE-1) / PAGE_SIZE;
ret = phys_to_virt(bdata->last_pos * PAGE_SIZE +
- offset +
- bdata->node_boot_start);
+ offset + node_boot_start);
bdata->last_pos = start + areasize - 1;
bdata->last_offset = remaining_size;
}
@@ -318,14 +326,14 @@ found:
} else {
bdata->last_pos = start + areasize - 1;
bdata->last_offset = size & ~PAGE_MASK;
- ret = phys_to_virt(start * PAGE_SIZE + bdata->node_boot_start);
+ ret = phys_to_virt(start * PAGE_SIZE + node_boot_start);
}
/*
* Reserve the area now:
*/
for (i = start; i < start + areasize; i++)
- if (unlikely(test_and_set_bit(i, bdata->node_bootmem_map)))
+ if (unlikely(test_and_set_bit(i, node_bootmem_map)))
BUG();
memset(ret, 0, size);
return ret;
next prev parent reply other threads:[~2008-03-19 22:29 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200803181237.33861.yhlu.kernel@gmail.com>
[not found] ` <200803181255.10402.yhlu.kernel@gmail.com>
2008-03-18 23:44 ` [PATCH] x86: trim mtrr don't close gap for resource allocation Yinghai Lu
2008-03-21 10:44 ` Ingo Molnar
2008-03-19 21:03 ` [PATCH 02/12] mm: fix boundary checking in free_bootmem_core fix Yinghai Lu
2008-03-19 21:03 ` [PATCH 03/12] x86_64: free_bootmem should take phys Yinghai Lu
2008-03-19 21:03 ` [PATCH 04/12] x86_64: reserve dma32 early for gart Yinghai Lu
2008-03-19 21:04 ` [PATCH 05/12] mm: make mem_map allocation continuous Yinghai Lu
2008-03-19 21:04 ` [PATCH 06/12] mm: fix alloc_bootmem_core to use fast searching for all nodes Yinghai Lu
2008-03-19 21:04 ` Yinghai Lu [this message]
2008-03-19 21:04 ` [PATCH 08/12] mm: allocate section_map for sparse_init Yinghai Lu
2008-03-19 21:04 ` [PATCH 09/12] mm: make reserve_bootmem can crossed the nodes v2 Yinghai Lu
2008-03-19 21:04 ` [PATCH 10/12] x86_64: make reserve_bootmem_generic to use new reserve_bootmem Yinghai Lu
2008-03-21 10:50 ` Ingo Molnar
2008-03-19 21:04 ` [PATCH 11/12] x86_64: do not reserve ramdisk two times Yinghai Lu
2008-03-19 21:05 ` [PATCH 12/12] x86_64: fix setup_node_bootmem to support big mem excluding with memmap Yinghai Lu
2008-03-21 10:52 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200803191404.23430.yhlu.kernel@gmail.com \
--to=yhlu.kernel.send@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=clameter@sgi.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=yhlu.kernel@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox