Re: [linux-pm] [PATCH 2/3] PM: Make wakeup flags available whenever CONFIG_PM is set (ver 2)

[David Brownell <david-b@pacbell.net>]

On Wednesday 19 March 2008, Rafael J. Wysocki wrote:
> From: Alan Stern <stern@rowland.harvard.edu>
> 
> The various wakeup flags and their accessor macros in struct
> dev_pm_info should be available whenever CONFIG_PM is enabled, not
> just when CONFIG_PM_SLEEP is on.  Otherwise remote wakeup won't always
> be configurable for runtime power management.  This patch (as1056b)
> fixes the oversight.

More accurately, fixes the "regression" ... as noted sometime
last summer, after 296699de6bdc717189a331ab6bbe90e05c94db06
introduced CONFIG_SUSPEND.  But that didn't make the regression
list for that kernel, ergo the delay in fixing it.

- Dave


> [rjw: rebased]
> 
> Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
> ---
>  drivers/base/power/main.c  |    2 --
>  drivers/base/power/sysfs.c |    2 ++
>  include/linux/pm.h         |   36 +++++++++++++++++++++---------------
>  3 files changed, 23 insertions(+), 17 deletions(-)
> 
> Index: linux-2.6/include/linux/pm.h
> ===================================================================
> --- linux-2.6.orig/include/linux/pm.h
> +++ linux-2.6/include/linux/pm.h
> @@ -183,9 +183,9 @@ typedef struct pm_message {
>  struct dev_pm_info {
>  	pm_message_t		power_state;
>  	unsigned		can_wakeup:1;
> +	unsigned		should_wakeup:1;
>  	bool			sleeping:1;	/* Owned by the PM core */
>  #ifdef	CONFIG_PM_SLEEP
> -	unsigned		should_wakeup:1;
>  	struct list_head	entry;
>  #endif
>  };
> @@ -198,11 +198,6 @@ extern void device_resume(void);
>  extern int device_suspend(pm_message_t state);
>  extern int device_prepare_suspend(pm_message_t state);
>  
> -#define device_set_wakeup_enable(dev,val) \
> -	((dev)->power.should_wakeup = !!(val))
> -#define device_may_wakeup(dev) \
> -	(device_can_wakeup(dev) && (dev)->power.should_wakeup)
> -
>  extern void __suspend_report_result(const char *function, void *fn, int ret);
>  
>  #define suspend_report_result(fn, ret)					\
> @@ -210,6 +205,24 @@ extern void __suspend_report_result(cons
>  		__suspend_report_result(__FUNCTION__, fn, ret);		\
>  	} while (0)
>  
> +#else /* !CONFIG_PM_SLEEP */
> +
> +static inline int device_suspend(pm_message_t state)
> +{
> +	return 0;
> +}
> +
> +#define suspend_report_result(fn, ret) do { } while (0)
> +
> +#endif /* !CONFIG_PM_SLEEP */
> +
> +#ifdef CONFIG_PM
> +
> +#define device_set_wakeup_enable(dev,val) \
> +	((dev)->power.should_wakeup = !!(val))
> +#define device_may_wakeup(dev) \
> +	(device_can_wakeup(dev) && (dev)->power.should_wakeup)
> +
>  /*
>   * Platform hook to activate device wakeup capability, if that's not already
>   * handled by enable_irq_wake() etc.
> @@ -224,24 +237,17 @@ static inline int call_platform_enable_w
>  	return 0;
>  }
>  
> -#else /* !CONFIG_PM_SLEEP */
> -
> -static inline int device_suspend(pm_message_t state)
> -{
> -	return 0;
> -}
> +#else /* !CONFIG_PM */
>  
>  #define device_set_wakeup_enable(dev,val)	do{}while(0)
>  #define device_may_wakeup(dev)			(0)
>  
> -#define suspend_report_result(fn, ret) do { } while (0)
> -
>  static inline int call_platform_enable_wakeup(struct device *dev, int is_on)
>  {
>  	return 0;
>  }
>  
> -#endif /* !CONFIG_PM_SLEEP */
> +#endif /* !CONFIG_PM */
>  
>  /* changes to device_may_wakeup take effect on the next pm state change.
>   * by default, devices should wakeup if they can.
> Index: linux-2.6/drivers/base/power/main.c
> ===================================================================
> --- linux-2.6.orig/drivers/base/power/main.c
> +++ linux-2.6/drivers/base/power/main.c
> @@ -57,8 +57,6 @@ static DEFINE_MUTEX(dpm_list_mtx);
>  /* 'true' if all devices have been suspended, protected by dpm_list_mtx */
>  static bool all_sleeping;
>  
> -int (*platform_enable_wakeup)(struct device *dev, int is_on);
> -
>  /**
>   *	device_pm_add - add a device to the list of active devices
>   *	@dev:	Device to be added to the list
> Index: linux-2.6/drivers/base/power/sysfs.c
> ===================================================================
> --- linux-2.6.orig/drivers/base/power/sysfs.c
> +++ linux-2.6/drivers/base/power/sysfs.c
> @@ -6,6 +6,8 @@
>  #include <linux/string.h>
>  #include "power.h"
>  
> +int (*platform_enable_wakeup)(struct device *dev, int is_on);
> +
>  
>  /*
>   *	wakeup - Report/change current wakeup option for device
> 
> _______________________________________________
> linux-pm mailing list
> linux-pm@lists.linux-foundation.org
> https://lists.linux-foundation.org/mailman/listinfo/linux-pm
>