From: Yinghai Lu <yhlu.kernel.send@gmail.com>
To: Ingo Molnar <mingo@elte.hu>, "H. Peter Anvin" <hpa@zytor.com>,
Thomas Gleixner <tglx@linutronix.de>,
Andrew Morton <akpm@linux-foundation.org>
Cc: kernel list <linux-kernel@vger.kernel.org>
Subject: [PATCH] x86: enable PAT for amd k8 and fam10h
Date: Mon, 24 Mar 2008 16:02:01 -0700 [thread overview]
Message-ID: <200803241602.01957.yhlu.kernel@gmail.com> (raw)
[PATCH] x86: enable PAT for amd k8 and fam10h
make known_pat_cpu to think amd k8 and fam10h is ok too.
also make tom2 below to be WRBACK
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 011e07e..74ec2ea 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -37,6 +37,7 @@ static struct fixed_range_block fixed_range_blocks[] = {
static unsigned long smp_changes_mask;
static struct mtrr_state mtrr_state = {};
static int mtrr_state_set;
+static u64 tom2;
#undef MODULE_PARAM_PREFIX
#define MODULE_PARAM_PREFIX "mtrr."
@@ -138,6 +139,11 @@ u8 mtrr_type_lookup(u64 start, u64 end)
}
}
+ if (tom2) {
+ if (start >= (1ULL<<32) && (end < tom2))
+ return MTRR_TYPE_WRBACK;
+ }
+
if (prev_match != 0xFF)
return prev_match;
@@ -206,6 +212,15 @@ void __init get_mtrr_state(void)
mtrr_state.def_type = (lo & 0xff);
mtrr_state.enabled = (lo & 0xc00) >> 10;
+ if (amd_special_default_mtrr()) {
+ unsigned lo, hi;
+ /* TOP_MEM2 */
+ rdmsr(MSR_K8_TOP_MEM2, lo, hi);
+ tom2 = hi;
+ tom2 <<= 32;
+ tom2 |= lo;
+ tom2 &= 0xffffff8000000ULL;
+ }
if (mtrr_show) {
int high_width;
@@ -236,6 +251,8 @@ void __init get_mtrr_state(void)
else
printk(KERN_INFO "MTRR %u disabled\n", i);
}
+ if (tom2)
+ printk(KERN_INFO "TOM2: %016lx aka %ldM\n", tom2, tom2>>20);
}
mtrr_state_set = 1;
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index a6450b3..6a1e278 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -627,7 +627,7 @@ early_param("disable_mtrr_trim", disable_mtrr_trim_setup);
#define Tom2Enabled (1U << 21)
#define Tom2ForceMemTypeWB (1U << 22)
-static __init int amd_special_default_mtrr(void)
+int __init amd_special_default_mtrr(void)
{
u32 l, h;
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index f74505f..a9e1a27 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -49,6 +49,12 @@ static int pat_known_cpu(void)
return 1;
}
}
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
+ boot_cpu_data.x86 >= 0xf && boot_cpu_data.x86 <= 0x11) {
+ if (cpu_has_pat) {
+ return 1;
+ }
+ }
pat_wc_enabled = 0;
printk(KERN_INFO "CPU and/or kernel does not support PAT.\n");
diff --git a/include/asm-x86/mtrr.h b/include/asm-x86/mtrr.h
index ee17229..d3d2662 100644
--- a/include/asm-x86/mtrr.h
+++ b/include/asm-x86/mtrr.h
@@ -99,6 +99,7 @@ extern void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi);
extern void mtrr_ap_init(void);
extern void mtrr_bp_init(void);
extern int mtrr_trim_uncached_memory(unsigned long end_pfn);
+extern int amd_special_default_mtrr(void);
# else
static inline u8 mtrr_type_lookup(u64 addr, u64 end)
{
next reply other threads:[~2008-03-24 22:59 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-24 23:02 Yinghai Lu [this message]
2008-03-25 1:29 ` [PATCH] x86: enable PAT for amd k8 and fam10h H. Peter Anvin
2008-03-25 2:22 ` Yinghai Lu
2008-03-25 4:45 ` H. Peter Anvin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200803241602.01957.yhlu.kernel@gmail.com \
--to=yhlu.kernel.send@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
--cc=yhlu.kernel@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox