public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Jarod Wilson <jwilson@redhat.com>
To: linux1394-devel@lists.sourceforge.net
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>,
	Martin Michlmayr <tbm@cyrius.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>,
	linux-kernel@vger.kernel.org, "H. Peter Anvin" <hpa@zytor.com>
Subject: Re: nobody cared about IRQ 19 (firewire, on a HP 2510p notebook)
Date: Sun, 30 Mar 2008 21:06:41 -0400	[thread overview]
Message-ID: <200803302106.42624.jwilson@redhat.com> (raw)
In-Reply-To: <47EFD09D.3020906@s5r6.in-berlin.de>

On Sunday 30 March 2008 01:40:45 pm Stefan Richter wrote:
> Martin Michlmayr wrote:
> > * Stefan Richter <stefanr@s5r6.in-berlin.de> [2008-03-30 13:11]:
> >> Martin, please check whether the same happens if you disable
> >> firewire-ohci in the kernel config (or blacklist it in the modprobe
> >> config) and use the ohci1394 driver instead.
> >
> > Yes, I get essentially the same message with the ohci1394 driver:
> >
> > [  895.455783] irq 19: nobody cared (try booting with the "irqpoll"
> > option) [  895.455783] Pid: 0, comm: swapper Not tainted 2.6.25-rc7-amd64
> > #1 [  895.455783]
> > [  895.455783] Call Trace:
> > [  895.455783]  <IRQ>  [<ffffffff88078155>]
> > :ohci1394:ohci_irq_handler+0x4b/0x76e [  895.455783] 
> > [<ffffffff8026c883>] __report_bad_irq+0x30/0x72
> > [  895.455783]  [<ffffffff8026cac2>] note_interrupt+0x1fd/0x23f
> > [  895.455783]  [<ffffffff8026d34f>] handle_fasteoi_irq+0xa5/0xc8
> > [  895.455783]  [<ffffffff8020f53c>] do_IRQ+0x6d/0xd9
> > [  895.455783]  [<ffffffff8020c46d>] ret_from_intr+0x0/0x19
> > [  895.455783]  <EOI>  [<ffffffff803a25a4>] menu_reflect+0x0/0x75
> > [  895.455783]  [<ffffffff8800642b>]
> > :processor:acpi_idle_enter_simple+0x18d/0x1fe [  895.455783] 
> > [<ffffffff803a1b2b>] cpuidle_idle_call+0x7a/0xb3 [  895.455783] 
> > [<ffffffff803a1ab1>] cpuidle_idle_call+0x0/0xb3
> > [  895.455783]  [<ffffffff8020b06c>] cpu_idle+0xa9/0xd3
> > [  895.455783]
> > [  895.455783] handlers:
> > [  895.455783] [<ffffffff8807810a>] (ohci_irq_handler+0x0/0x76e
> > [ohci1394]) [  895.455783] Disabling IRQ #19
> >
> > dmesg is attached.
>
> Thanks.
>
> I tend to believe it is a problem to be addressed in the x86 platform
> support, not a driver problem.
>
> I Cc'd some random x86 folk...  To rehash the issue:
>
>    - Controller: Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)
>      Board: PM965/GM965/GL960 based
>      The R5C832 is known to work with ohci1394 according to
>      http://hardware4linux.info/component/14348/ and other reports.

Its also known to work with the juju firewire stack -- that's the controller 
in my own laptop, as well as a few other folks here in the office, all 
running the new stack.



-- 
Jarod Wilson
jwilson@redhat.com

  parent reply	other threads:[~2008-03-31  1:07 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-03-21 15:39 nobody cared about IRQ 19 (firewire, on a HP 2510p notebook) Martin Michlmayr
2008-03-21 16:31 ` Stefan Richter
2008-03-22 11:27   ` Martin Michlmayr
2008-03-30 11:11   ` Stefan Richter
2008-03-30 16:13     ` Martin Michlmayr
2008-03-30 17:40       ` Stefan Richter
2008-03-30 20:10         ` Thomas Gleixner
2008-03-31  9:57           ` Martin Michlmayr
2008-03-31 10:17             ` Thomas Gleixner
2008-03-31 14:44               ` Martin Michlmayr
2008-04-01  7:20                 ` Thomas Gleixner
2008-04-01  7:41           ` Benjamin Herrenschmidt
2008-03-31  1:06         ` Jarod Wilson [this message]
2008-03-31 10:19           ` Thomas Gleixner
2008-03-31 10:28             ` Martin Michlmayr
2008-03-31 12:58               ` Stefan Richter
2008-03-31 13:00                 ` Stefan Richter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200803302106.42624.jwilson@redhat.com \
    --to=jwilson@redhat.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux1394-devel@lists.sourceforge.net \
    --cc=mingo@redhat.com \
    --cc=stefanr@s5r6.in-berlin.de \
    --cc=tbm@cyrius.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox