* Solid freezes with 2.6.25
@ 2008-04-28 14:29 Gabor Gombas
2008-04-28 14:54 ` Oliver Pinter
` (2 more replies)
0 siblings, 3 replies; 21+ messages in thread
From: Gabor Gombas @ 2008-04-28 14:29 UTC (permalink / raw)
To: linux-kernel
Hi,
I'm seeing solid freezes with 2.6.25. 2.6.24.x works fine, 2.6.25 never
had an uptime longer than 4-6 hours so far. netconsole captured the
following:
NMI Watchdog detected LOCKUP on CPU 1
CPU 1
Modules linked in: edd netconsole configfs i915 radeon drm rfcomm l2cap bluetooth xfrm_user xfrm4_tunnel tunnel4 ipcomp esp4 aead ah4 nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs ipt_ULOG microcode ipt_REJECT nf_conntrack_ipv4 xt_state nf_conntrack xt_tcpudp ipt_LOG xt_limit iptable_filter ip_tables x_tables deflate zlib_deflate zlib_inflate ctr twofish twofish_common camellia serpent blowfish des_generic cbc aes_x86_64 aes_generic xcbc sha256_generic sha1_generic md5 crypto_null af_key fuse dm_crypt crypto_blkcipher dm_snapshot dm_mirror dm_mod coretemp w83627ehf hwmon_vid snd_hda_intel snd_pcm 8250_pnp snd_timer 8250 sg snd 8139too serial_core video r8169 snd_page_alloc usbhid i2c_i801 sr_mod iTCO_wdt floppy cdrom [last unloaded: netconsole]
Pid: 2535, comm: postgres Not tainted 2.6.25 #11
RIP: 0010:[<ffffffff8021aa54>] [<ffffffff8021aa54>] hpet_rtc_interrupt+0x11a/0x2fd
RSP: 0000:ffff81012fc77ec8 EFLAGS: 00200097
RAX: 0000000000000000 RBX: 0000000000200002 RCX: 0000000000000000
RDX: 000000000000c6c6 RSI: 0000000000200002 RDI: ffffffff80655ef8
RBP: 000000010011144c R08: ffffffffff5fc128 R09: 0000000000000000
R10: 0000000000200046 R11: 0000000000000000 R12: 00000000000000a6
R13: ffff81012fcf8800 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff81012fc0f480(0063) knlGS:00000000f7f228e0
CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 00000000f1559000 CR3: 0000000128cd8000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process postgres (pid: 2535, threadinfo ffff810128d18000, task ffff81012cbb6930)
Stack: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
ffffffff00000000 0000000000000001 ffffffff806432c0 ffff81012fe25bc0
0000000000000000 0000000000000000 0000000000000008 ffffffff8025d6d0
Call Trace:
<IRQ> [<ffffffff8025d6d0>] ? handle_IRQ_event+0x25/0x53
[<ffffffff8025ec3a>] ? handle_edge_irq+0xdd/0x11c
[<ffffffff8020c0cc>] ? call_softirq+0x1c/0x28
[<ffffffff8020e26a>] ? do_IRQ+0xf1/0x15f
[<ffffffff8020b451>] ? ret_from_intr+0x0/0xa
<EOI>
Code: a0 28 00 bf 0a 00 00 00 48 89 c3 e8 73 6b ff ff 48 89 de 41 88 c4 48 c7 c7 f8 5e 65 80 e8 14 a1 28 00 45 84 e4 78 04 eb 12 f3 90 <48> 8b 05 25 1e 3e 00 48 29 e8 48 83 f8 04 76 ee 48 c7 c7 f8 5e
---[ end trace 8625c90c6582673f ]---
Kernel panic - not syncing: Aiee, killing interrupt handler!
Also, I have these messages in syslog:
Apr 28 13:13:31 boogie kernel: rtc: lost 157 interrupts
Apr 28 13:13:32 boogie kernel: rtc: lost 37 interrupts
Apr 28 13:25:37 boogie kernel: rtc: lost 60 interrupts
More info about the machine is attached. I've also seen similar hangs with
2.6.25-rc6 on an nforce4/Athlon64 box but I'm reluctant to re-test there
because RAID rebuild takes too long.
Gabor
dmesg:
======
Initializing cgroup subsys cpuset
Linux version 2.6.25 (gombasg@boogie) (gcc version 4.2.3 (Debian 4.2.3-3)) #11 SMP Mon Apr 28 10:41:10 CEST 2008
Command line: BOOT_IMAGE=l2625 ro root=900 video=intelfb:1280x1024-16@60 resume=/dev/sda2 selinux=1 audit=1 nmi_watchdog=2 single
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cf2ac000 (usable)
BIOS-e820: 00000000cf2ac000 - 00000000cf2ef000 (ACPI NVS)
BIOS-e820: 00000000cf2ef000 - 00000000cf3c7000 (reserved)
BIOS-e820: 00000000cf3c7000 - 00000000cf3d7000 (ACPI NVS)
BIOS-e820: 00000000cf3d7000 - 00000000cf453000 (reserved)
BIOS-e820: 00000000cf453000 - 00000000cf459000 (ACPI data)
BIOS-e820: 00000000cf459000 - 00000000cf45a000 (ACPI NVS)
BIOS-e820: 00000000cf45a000 - 00000000cf45c000 (ACPI data)
BIOS-e820: 00000000cf45c000 - 00000000cf45d000 (ACPI NVS)
BIOS-e820: 00000000cf45d000 - 00000000cf45e000 (reserved)
BIOS-e820: 00000000cf45e000 - 00000000cf463000 (ACPI NVS)
BIOS-e820: 00000000cf463000 - 00000000cf472000 (reserved)
BIOS-e820: 00000000cf472000 - 00000000cf600000 (usable)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 848556) 1 entries of 256 used
Entering add_active_range(0, 849010, 849408) 2 entries of 256 used
Entering add_active_range(0, 1048576, 1245184) 3 entries of 256 used
end_pfn_map = 1245184
DMI 2.4 present.
ACPI: RSDP 000F03C0, 0024 (r2 INTEL)
ACPI: XSDT CF45AF10, 0044 (r1 INTEL DG31PR 6222004 MSFT 10013)
ACPI: FACP CF458D90, 00F4 (r4 INTEL DG31PR 6222004 MSFT 10013)
ACPI: DSDT CF453010, 4D33 (r1 INTEL DG31PR 0 INTL 20051117)
ACPI: FACS CF459F40, 0040
ACPI: APIC CF458F10, 006C (r2 INTEL DG31PR 6222004 MSFT 10013)
ACPI: HPET CF461D10, 0038 (r1 INTEL ICH7HPET 6222004 AMI. 1)
ACPI: MCFG CF461C10, 003C (r1 INTEL DG31PR 6222004 MSFT 97)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 848556) 1 entries of 256 used
Entering add_active_range(0, 849010, 849408) 2 entries of 256 used
Entering add_active_range(0, 1048576, 1245184) 3 entries of 256 used
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] SMP_TRAMPOLINE
early res: 2 [200000-6bc61b] TEXT DATA BSS
early res: 3 [9fc00-a0bff] EBDA
early res: 4 [8000-dfff] PGTABLE
[ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
[ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
[ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
[ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
[ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
[ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
[ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
[ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
[ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
[ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
[ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
[ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
[ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
[ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
[ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
[ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
[ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
[ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
[ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
[ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
[ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0
[ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0
[ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810006e00000 on node 0
[ffffe20003000000-ffffe200031fffff] PMD ->ffff810007200000 on node 0
[ffffe20003200000-ffffe200033fffff] PMD ->ffff810007600000 on node 0
[ffffe20003400000-ffffe200035fffff] PMD ->ffff810007a00000 on node 0
[ffffe20003600000-ffffe200037fffff] PMD ->ffff810007e00000 on node 0
[ffffe20003800000-ffffe200039fffff] PMD ->ffff810008200000 on node 0
[ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810008600000 on node 0
[ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810008a00000 on node 0
[ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810008e00000 on node 0
[ffffe20004000000-ffffe200041fffff] PMD ->ffff810009200000 on node 0
[ffffe20004200000-ffffe200043fffff] PMD ->ffff810009600000 on node 0
[ffffe20004400000-ffffe200045fffff] PMD ->ffff810009a00000 on node 0
[ffffe20004600000-ffffe200047fffff] PMD ->ffff810009e00000 on node 0
[ffffe20004800000-ffffe200049fffff] PMD ->ffff81000a200000 on node 0
[ffffe20004a00000-ffffe20004bfffff] PMD ->ffff81000a600000 on node 0
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1245184
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0 -> 159
0: 256 -> 848556
0: 849010 -> 849408
0: 1048576 -> 1245184
On node 0 totalpages: 1045465
DMA zone: 64 pages used for memmap
DMA zone: 1224 pages reserved
DMA zone: 2711 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 828538 pages, LIFO batch:31
Normal zone: 3072 pages used for memmap
Normal zone: 193536 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d0000000 (gap: cf600000:2f71c000)
SMP: Allowing 4 CPUs, 2 hotplug CPUs
PERCPU: Allocating 34112 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1024785
Kernel command line: BOOT_IMAGE=l2625 ro root=900 video=intelfb:1280x1024-16@60 resume=/dev/sda2 selinux=1 audit=1 nmi_watchdog=2 single
audit: enabled (after initialization)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC calibrated against PM_TIMER
time.c: Detected 2199.955 MHz processor.
Console: colour VGA+ 80x50
console [tty0] enabled
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0xae21000 - 0xee21000
Memory: 4025872k/4980736k available (2717k kernel code, 155356k reserved, 1280k data, 248k init)
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
hpet clockevent registered
Calibrating delay using timer specific routine.. 4403.20 BogoMIPS (lpj=8806400)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20070126
Using local APIC timer interrupts.
APIC timer calibration result 12499744
Detected 12.499 MHz APIC timer.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4399.88 BogoMIPS (lpj=8799778)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz stepping 0d
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Testing NMI watchdog ... OK.
CPU0 attaching sched-domain:
domain 0: span 3
groups: 1 2
CPU1 attaching sched-domain:
domain 0: span 3
groups: 2 1
net_namespace: 1016 bytes
xor: automatically using best checksumming function: generic_sse
generic_sse: 8072.000 MB/sec
xor: using function: generic_sse (8072.000 MB/sec)
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: BIOS _OSI(Linux) query ignored
ACPI: DMI System Vendor:
ACPI: DMI Product Name:
ACPI: DMI Product Version:
ACPI: DMI Board Name: DG31PR
ACPI: DMI BIOS Vendor: Intel Corp.
ACPI: DMI BIOS Date: 02/27/2008
ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
system 00:01: iomem range 0xe0000000-0xe3ffffff has been reserved
system 00:02: ioport range 0x400-0x47f has been reserved
system 00:02: ioport range 0x1180-0x119f has been reserved
system 00:02: ioport range 0x500-0x53f has been reserved
system 00:02: iomem range 0xfec00000-0xfecfffff has been reserved
system 00:02: iomem range 0xfee00000-0xfee0ffff could not be reserved
system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:02: iomem range 0xffb00000-0xffcfffff could not be reserved
system 00:02: iomem range 0xfc800000-0xfc800fff has been reserved
system 00:02: iomem range 0xfed20000-0xfed7ffff has been reserved
system 00:02: iomem range 0xffe00000-0xffffffff could not be reserved
system 00:03: ioport range 0x290-0x29f has been reserved
system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: e000-efff
MEM window: 0xff800000-0xff8fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: d000-dfff
MEM window: 0xff700000-0xff7fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (enabled)
type=2000 audit(1209386619.444:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
async_tx: api initialized (sync-only)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button (CM) [SLPB]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button (CM) [PWRB]
ACPI: SSDT CF45EC10, 02CC (r1 AMI IST 1 MSFT 3000001)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:01 is registered as cooling_device1
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.103
agpgart: Detected an Intel G33 Chipset.
agpgart: Detected 7164K stolen memory.
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
agpgart: AGP aperture is 256M @ 0xd0000000
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
intelfb: Version 0.9.4
Driver 'sd' needs updating - please use bus_type methods
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0f0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf0f8 irq 15
ata1.00: ATAPI: ASUS DRW-1814BL, 1.13, max UDMA/66
ata1.00: configured for UDMA/66
ata2: port disabled. ignoring.
scsi 0:0:0:0: CD-ROM ASUS DRW-1814BL 1.13 PQ: 0 ANSI: 5
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 17
ata4: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 17
ata3.00: ATA-7: Maxtor 7L250S0, BACE1G10, max UDMA/133
ata3.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
ata4.00: ATA-7: Maxtor 7L250S0, BACE1G10, max UDMA/133
ata4.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA Maxtor 7L250S0 BACE PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
scsi 3:0:0:0: Direct-Access ATA Maxtor 7L250S0 BACE PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 488281250 512-byte hardware sectors (250000 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] 488281250 512-byte hardware sectors (250000 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 < sdb5 >
sd 3:0:0:0: [sdb] Attached SCSI disk
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff984000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
usb 1-2: new high speed USB device using ehci_hcd and address 3
rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k
i2c /dev entries driver
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
raid6: int64x1 2069 MB/s
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
raid6: int64x2 2606 MB/s
raid6: int64x4 2493 MB/s
raid6: int64x8 2015 MB/s
raid6: sse2x1 3509 MB/s
raid6: sse2x2 3917 MB/s
usb 2-1: new low speed USB device using uhci_hcd and address 2
raid6: sse2x4 6646 MB/s
raid6: using algorithm sse2x4 (6646 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
EDAC MC: Ver: 2.1.0 Apr 25 2008
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 1
Marking TSC unstable due to TSC halts in idle
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:08: setting system clock to 2008-04-28 12:43:41 UTC (1209386621)
md: Autodetecting RAID arrays.
md: invalid raid superblock magic on sda5
md: sda5 does not have a valid v0.90 superblock, not importing!
usb 2-1: configuration #1 chosen from 1 choice
md: invalid raid superblock magic on sdb5
md: sdb5 does not have a valid v0.90 superblock, not importing!
md: Scanned 4 and added 2 devices.
md: autorun ...
md: considering sdb1 ...
md: adding sdb1 ...
md: adding sda1 ...
md: created md0
md: bind<sda1>
md: bind<sdb1>
md: running: <sdb1><sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 248k freed
SELinux:8192 avtab hash slots allocated. Num of rules:71699
SELinux:8192 avtab hash slots allocated. Num of rules:71699
security: 7 users, 7 roles, 1457 types, 61 bools
security: 69 classes, 71699 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev md0, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: policy loaded with handle_unknown=deny
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.0 to 64
eth0: RTL8168b/8111b at 0xffffc20000020000, 00:1c:c0:34:06:c9, XID 38500000 IRQ 380
udev: renamed network interface eth0 to mobo
ACPI Exception (video-1613): AE_NOT_FOUND, Evaluating _DOD [20070126]
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:17/input/input4
FDC 0 is a post-1991 82077
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 21 (level, low) -> IRQ 21
eth0: RealTek RTL8139 at 0xffffc20000022000, 00:c1:28:01:d5:f6, IRQ 21
eth0: Identified 8139 chip type 'RTL-8139C'
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: Attached scsi generic sg2 type 0
ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
udev: renamed network interface eth0 to rtl
input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input5
input: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
printk: 21 messages suppressed.
Adding 2008116k swap on /dev/sda2. Priority:-1 extents:1 across:2008116k
Adding 2008116k swap on /dev/sdb2. Priority:-2 extents:1 across:2008116k
EXT3 FS on md0, internal journal
w83627ehf: Found W83627DHG chip at 0x290
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
md: md3 stopped.
md: bind<sda5>
md: bind<sdb5>
md: md3: raid array is not clean -- starting background reconstruction
raid1: raid set md3 active with 2 out of 2 mirrors
md: resync of RAID array md3
md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
md: using 128k window, over a total of 240235840 blocks.
md: resuming resync of md3 from checkpoint.
fuse init (API version 7.9)
SELinux: initialized (dev fusectl, type fusectl), not configured for labeling
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-0, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-1, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-2, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-3, type ext3), uses xattr
printk: 129 messages suppressed.
NET: Registered protocol family 15
printk: 15 messages suppressed.
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
r8169: mobo: link up
r8169: mobo: link up
rtl: link down
ADDRCONF(NETDEV_UP): rtl: link is not ready
printk: 111 messages suppressed.
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
lspci -vvvnn:
=============
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [88] Subsystem: Intel Corporation Device [8086:0000]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0300c Data: 4159
Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Kernel driver in use: pcieport-driver
00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2] (rev 02)
Subsystem: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ff900000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at f140 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at ff600000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Intel Corporation Device [8086:d608]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ff980000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 1, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0300c Data: 4161
Capabilities: [90] Subsystem: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: ff800000-ff8fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 2, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0300c Data: 4169
Capabilities: [90] Subsystem: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01)
Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at f080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01)
Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at f060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01)
Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01)
Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at f020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20)
Subsystem: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at ff984000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: ff700000-ff7fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Gammagraphx, Inc. Device [0000:0000]
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
Subsystem: Intel Corporation Device [8086:544e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel modules: iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f0f0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at f0e0 [size=8]
Region 1: I/O ports at f0d0 [size=4]
Region 2: I/O ports at f0c0 [size=8]
Region 3: I/O ports at f0b0 [size=4]
Region 4: I/O ports at f0a0 [size=16]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01)
Subsystem: Intel Corporation Device [8086:d608]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at f000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: Intel Corporation Device [8086:d608]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 380
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at ff820000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at ff800000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Vital Product Data <?>
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0300c Data: 4189
Capabilities: [60] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <128ns, L1 unlimited
ExtTag+ AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [84] Vendor Specific Information <?>
Kernel driver in use: r8169
Kernel modules: r8169
04:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Compex Device [11f6:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at d000 [size=256]
Region 1: Memory at ff700000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: 8139too
Kernel modules: 8139too
--
---------------------------------------------------------
MTA SZTAKI Computer and Automation Research Institute
Hungarian Academy of Sciences
---------------------------------------------------------
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Solid freezes with 2.6.25
2008-04-28 14:29 Solid freezes with 2.6.25 Gabor Gombas
@ 2008-04-28 14:54 ` Oliver Pinter
2008-04-28 14:59 ` Gabor Gombas
2008-04-28 16:25 ` Andrew Morton
2008-04-29 7:24 ` Gabor Gombas
2 siblings, 1 reply; 21+ messages in thread
From: Oliver Pinter @ 2008-04-28 14:54 UTC (permalink / raw)
To: Gabor Gombas; +Cc: linux-kernel, Ingo Molnar, Thomas Gleixner
[add CC]
On 4/28/08, Gabor Gombas <gombasg@sztaki.hu> wrote:
> Hi,
>
> I'm seeing solid freezes with 2.6.25. 2.6.24.x works fine, 2.6.25 never
> had an uptime longer than 4-6 hours so far. netconsole captured the
> following:
>
> NMI Watchdog detected LOCKUP on CPU 1
> CPU 1
> Modules linked in: edd netconsole configfs i915 radeon drm rfcomm l2cap
> bluetooth xfrm_user xfrm4_tunnel tunnel4 ipcomp esp4 aead ah4 nfsd lockd
> nfs_acl auth_rpcgss sunrpc exportfs ipt_ULOG microcode ipt_REJECT
> nf_conntrack_ipv4 xt_state nf_conntrack xt_tcpudp ipt_LOG xt_limit
> iptable_filter ip_tables x_tables deflate zlib_deflate zlib_inflate ctr
> twofish twofish_common camellia serpent blowfish des_generic cbc aes_x86_64
> aes_generic xcbc sha256_generic sha1_generic md5 crypto_null af_key fuse
> dm_crypt crypto_blkcipher dm_snapshot dm_mirror dm_mod coretemp w83627ehf
> hwmon_vid snd_hda_intel snd_pcm 8250_pnp snd_timer 8250 sg snd 8139too
> serial_core video r8169 snd_page_alloc usbhid i2c_i801 sr_mod iTCO_wdt
> floppy cdrom [last unloaded: netconsole]
> Pid: 2535, comm: postgres Not tainted 2.6.25 #11
> RIP: 0010:[<ffffffff8021aa54>] [<ffffffff8021aa54>]
> hpet_rtc_interrupt+0x11a/0x2fd
> RSP: 0000:ffff81012fc77ec8 EFLAGS: 00200097
> RAX: 0000000000000000 RBX: 0000000000200002 RCX: 0000000000000000
> RDX: 000000000000c6c6 RSI: 0000000000200002 RDI: ffffffff80655ef8
> RBP: 000000010011144c R08: ffffffffff5fc128 R09: 0000000000000000
> R10: 0000000000200046 R11: 0000000000000000 R12: 00000000000000a6
> R13: ffff81012fcf8800 R14: 0000000000000000 R15: 0000000000000000
> FS: 0000000000000000(0000) GS:ffff81012fc0f480(0063) knlGS:00000000f7f228e0
> CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
> CR2: 00000000f1559000 CR3: 0000000128cd8000 CR4: 00000000000006e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process postgres (pid: 2535, threadinfo ffff810128d18000, task
> ffff81012cbb6930)
> Stack: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
> ffffffff00000000 0000000000000001 ffffffff806432c0 ffff81012fe25bc0
> 0000000000000000 0000000000000000 0000000000000008 ffffffff8025d6d0
> Call Trace:
> <IRQ> [<ffffffff8025d6d0>] ? handle_IRQ_event+0x25/0x53
> [<ffffffff8025ec3a>] ? handle_edge_irq+0xdd/0x11c
> [<ffffffff8020c0cc>] ? call_softirq+0x1c/0x28
> [<ffffffff8020e26a>] ? do_IRQ+0xf1/0x15f
> [<ffffffff8020b451>] ? ret_from_intr+0x0/0xa
> <EOI>
>
> Code: a0 28 00 bf 0a 00 00 00 48 89 c3 e8 73 6b ff ff 48 89 de 41 88 c4 48
> c7 c7 f8 5e 65 80 e8 14 a1 28 00 45 84 e4 78 04 eb 12 f3 90 <48> 8b 05 25 1e
> 3e 00 48 29 e8 48 83 f8 04 76 ee 48 c7 c7 f8 5e
> ---[ end trace 8625c90c6582673f ]---
> Kernel panic - not syncing: Aiee, killing interrupt handler!
>
> Also, I have these messages in syslog:
>
> Apr 28 13:13:31 boogie kernel: rtc: lost 157 interrupts
> Apr 28 13:13:32 boogie kernel: rtc: lost 37 interrupts
> Apr 28 13:25:37 boogie kernel: rtc: lost 60 interrupts
>
> More info about the machine is attached. I've also seen similar hangs with
> 2.6.25-rc6 on an nforce4/Athlon64 box but I'm reluctant to re-test there
> because RAID rebuild takes too long.
>
> Gabor
>
> dmesg:
> ======
>
> Initializing cgroup subsys cpuset
> Linux version 2.6.25 (gombasg@boogie) (gcc version 4.2.3 (Debian 4.2.3-3))
> #11 SMP Mon Apr 28 10:41:10 CEST 2008
> Command line: BOOT_IMAGE=l2625 ro root=900 video=intelfb:1280x1024-16@60
> resume=/dev/sda2 selinux=1 audit=1 nmi_watchdog=2 single
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cf2ac000 (usable)
> BIOS-e820: 00000000cf2ac000 - 00000000cf2ef000 (ACPI NVS)
> BIOS-e820: 00000000cf2ef000 - 00000000cf3c7000 (reserved)
> BIOS-e820: 00000000cf3c7000 - 00000000cf3d7000 (ACPI NVS)
> BIOS-e820: 00000000cf3d7000 - 00000000cf453000 (reserved)
> BIOS-e820: 00000000cf453000 - 00000000cf459000 (ACPI data)
> BIOS-e820: 00000000cf459000 - 00000000cf45a000 (ACPI NVS)
> BIOS-e820: 00000000cf45a000 - 00000000cf45c000 (ACPI data)
> BIOS-e820: 00000000cf45c000 - 00000000cf45d000 (ACPI NVS)
> BIOS-e820: 00000000cf45d000 - 00000000cf45e000 (reserved)
> BIOS-e820: 00000000cf45e000 - 00000000cf463000 (ACPI NVS)
> BIOS-e820: 00000000cf463000 - 00000000cf472000 (reserved)
> BIOS-e820: 00000000cf472000 - 00000000cf600000 (usable)
> BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
> BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
> Entering add_active_range(0, 0, 159) 0 entries of 256 used
> Entering add_active_range(0, 256, 848556) 1 entries of 256 used
> Entering add_active_range(0, 849010, 849408) 2 entries of 256 used
> Entering add_active_range(0, 1048576, 1245184) 3 entries of 256 used
> end_pfn_map = 1245184
> DMI 2.4 present.
> ACPI: RSDP 000F03C0, 0024 (r2 INTEL)
> ACPI: XSDT CF45AF10, 0044 (r1 INTEL DG31PR 6222004 MSFT 10013)
> ACPI: FACP CF458D90, 00F4 (r4 INTEL DG31PR 6222004 MSFT 10013)
> ACPI: DSDT CF453010, 4D33 (r1 INTEL DG31PR 0 INTL 20051117)
> ACPI: FACS CF459F40, 0040
> ACPI: APIC CF458F10, 006C (r2 INTEL DG31PR 6222004 MSFT 10013)
> ACPI: HPET CF461D10, 0038 (r1 INTEL ICH7HPET 6222004 AMI. 1)
> ACPI: MCFG CF461C10, 003C (r1 INTEL DG31PR 6222004 MSFT 97)
> Entering add_active_range(0, 0, 159) 0 entries of 256 used
> Entering add_active_range(0, 256, 848556) 1 entries of 256 used
> Entering add_active_range(0, 849010, 849408) 2 entries of 256 used
> Entering add_active_range(0, 1048576, 1245184) 3 entries of 256 used
> early res: 0 [0-fff] BIOS data page
> early res: 1 [6000-7fff] SMP_TRAMPOLINE
> early res: 2 [200000-6bc61b] TEXT DATA BSS
> early res: 3 [9fc00-a0bff] EBDA
> early res: 4 [8000-dfff] PGTABLE
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
> [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
> [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
> [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
> [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
> [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
> [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
> [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
> [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0
> [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0
> [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810006e00000 on node 0
> [ffffe20003000000-ffffe200031fffff] PMD ->ffff810007200000 on node 0
> [ffffe20003200000-ffffe200033fffff] PMD ->ffff810007600000 on node 0
> [ffffe20003400000-ffffe200035fffff] PMD ->ffff810007a00000 on node 0
> [ffffe20003600000-ffffe200037fffff] PMD ->ffff810007e00000 on node 0
> [ffffe20003800000-ffffe200039fffff] PMD ->ffff810008200000 on node 0
> [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810008600000 on node 0
> [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810008a00000 on node 0
> [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810008e00000 on node 0
> [ffffe20004000000-ffffe200041fffff] PMD ->ffff810009200000 on node 0
> [ffffe20004200000-ffffe200043fffff] PMD ->ffff810009600000 on node 0
> [ffffe20004400000-ffffe200045fffff] PMD ->ffff810009a00000 on node 0
> [ffffe20004600000-ffffe200047fffff] PMD ->ffff810009e00000 on node 0
> [ffffe20004800000-ffffe200049fffff] PMD ->ffff81000a200000 on node 0
> [ffffe20004a00000-ffffe20004bfffff] PMD ->ffff81000a600000 on node 0
> Zone PFN ranges:
> DMA 0 -> 4096
> DMA32 4096 -> 1048576
> Normal 1048576 -> 1245184
> Movable zone start PFN for each node
> early_node_map[4] active PFN ranges
> 0: 0 -> 159
> 0: 256 -> 848556
> 0: 849010 -> 849408
> 0: 1048576 -> 1245184
> On node 0 totalpages: 1045465
> DMA zone: 64 pages used for memmap
> DMA zone: 1224 pages reserved
> DMA zone: 2711 pages, LIFO batch:0
> DMA32 zone: 16320 pages used for memmap
> DMA32 zone: 828538 pages, LIFO batch:31
> Normal zone: 3072 pages used for memmap
> Normal zone: 193536 pages, LIFO batch:31
> Movable zone: 0 pages used for memmap
> ACPI: PM-Timer IO Port: 0x408
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Processor #0 (Bootup-CPU)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> Processor #1
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
> ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 0, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Setting APIC routing to flat
> ACPI: HPET id: 0x8086a201 base: 0xfed00000
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at d0000000 (gap: cf600000:2f71c000)
> SMP: Allowing 4 CPUs, 2 hotplug CPUs
> PERCPU: Allocating 34112 bytes of per cpu data
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1024785
> Kernel command line: BOOT_IMAGE=l2625 ro root=900
> video=intelfb:1280x1024-16@60 resume=/dev/sda2 selinux=1 audit=1
> nmi_watchdog=2 single
> audit: enabled (after initialization)
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> Extended CMOS year: 2000
> TSC calibrated against PM_TIMER
> time.c: Detected 2199.955 MHz processor.
> Console: colour VGA+ 80x50
> console [tty0] enabled
> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
> Checking aperture...
> PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> Placing software IO TLB between 0xae21000 - 0xee21000
> Memory: 4025872k/4980736k available (2717k kernel code, 155356k reserved,
> 1280k data, 248k init)
> CPA: page pool initialized 1 of 1 pages preallocated
> SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
> hpet clockevent registered
> Calibrating delay using timer specific routine.. 4403.20 BogoMIPS
> (lpj=8806400)
> Security Framework initialized
> SELinux: Initializing.
> SELinux: Starting in permissive mode
> selinux_register_security: Registering secondary module capability
> Capability LSM initialized as secondary
> Mount-cache hash table entries: 256
> Initializing cgroup subsys ns
> Initializing cgroup subsys cpuacct
> Initializing cgroup subsys memory
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 1024K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> CPU0: Thermal monitoring enabled (TM2)
> using mwait in idle threads.
> ACPI: Core revision 20070126
> Using local APIC timer interrupts.
> APIC timer calibration result 12499744
> Detected 12.499 MHz APIC timer.
> Booting processor 1/2 APIC 0x1
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 4399.88 BogoMIPS
> (lpj=8799778)
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 1024K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 1
> CPU1: Thermal monitoring enabled (TM2)
> Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz stepping 0d
> checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> Brought up 2 CPUs
> Testing NMI watchdog ... OK.
> CPU0 attaching sched-domain:
> domain 0: span 3
> groups: 1 2
> CPU1 attaching sched-domain:
> domain 0: span 3
> groups: 2 1
> net_namespace: 1016 bytes
> xor: automatically using best checksumming function: generic_sse
> generic_sse: 8072.000 MB/sec
> xor: using function: generic_sse (8072.000 MB/sec)
> NET: Registered protocol family 16
> No dock devices found.
> ACPI: bus type pci registered
> PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
> PCI: Not using MMCONFIG.
> PCI: Using configuration type 1
> ACPI: EC: Look up EC in DSDT
> ACPI: Interpreter enabled
> ACPI: (supports S0 S5)
> ACPI: Using IOAPIC for interrupt routing
> ACPI: BIOS _OSI(Linux) query ignored
> ACPI: DMI System Vendor:
> ACPI: DMI Product Name:
> ACPI: DMI Product Version:
> ACPI: DMI Board Name: DG31PR
> ACPI: DMI BIOS Vendor: Intel Corp.
> ACPI: DMI BIOS Date: 02/27/2008
> ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
> ACPI: If "acpi_osi=Linux" works better, please notify
> linux-acpi@vger.kernel.org
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
> pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
> PCI: Transparent bridge - 0000:00:1e.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp: PnP ACPI: found 13 devices
> ACPI: ACPI bus type pnp unregistered
> SCSI subsystem initialized
> libata version 3.00 loaded.
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
> report
> NetLabel: Initializing
> NetLabel: domain hash size = 128
> NetLabel: protocols = UNLABELED CIPSOv4
> NetLabel: unlabeled traffic allowed by default
> PCI-GART: No AMD northbridge found.
> hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> hpet0: 3 64-bit timers, 14318180 Hz
> ACPI: RTC can wake from S4
> system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
> system 00:01: iomem range 0xe0000000-0xe3ffffff has been reserved
> system 00:02: ioport range 0x400-0x47f has been reserved
> system 00:02: ioport range 0x1180-0x119f has been reserved
> system 00:02: ioport range 0x500-0x53f has been reserved
> system 00:02: iomem range 0xfec00000-0xfecfffff has been reserved
> system 00:02: iomem range 0xfee00000-0xfee0ffff could not be reserved
> system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
> system 00:02: iomem range 0xffb00000-0xffcfffff could not be reserved
> system 00:02: iomem range 0xfc800000-0xfc800fff has been reserved
> system 00:02: iomem range 0xfed20000-0xfed7ffff has been reserved
> system 00:02: iomem range 0xffe00000-0xffffffff could not be reserved
> system 00:03: ioport range 0x290-0x29f has been reserved
> system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
> PCI: Bridge: 0000:00:01.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:1c.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:1c.1
> IO window: e000-efff
> MEM window: 0xff800000-0xff8fffff
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:1e.0
> IO window: d000-dfff
> MEM window: 0xff700000-0xff7fffff
> PREFETCH window: disabled.
> ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:01.0 to 64
> ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:1c.0 to 64
> ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
> PCI: Setting latency timer of device 0000:00:1c.1 to 64
> PCI: Setting latency timer of device 0000:00:1e.0 to 64
> NET: Registered protocol family 2
> IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
> TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 262144 bind 65536)
> TCP reno registered
> audit: initializing netlink socket (enabled)
> type=2000 audit(1209386619.444:1): initialized
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> SELinux: Registering netfilter hooks
> async_tx: api initialized (sync-only)
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> pci 0000:00:02.0: Boot video device
> PCI: Setting latency timer of device 0000:00:01.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:01.0:pcie00]
> PCI: Setting latency timer of device 0000:00:1c.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:1c.0:pcie00]
> Allocate Port Service[0000:00:1c.0:pcie02]
> PCI: Setting latency timer of device 0000:00:1c.1 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:1c.1:pcie00]
> Allocate Port Service[0000:00:1c.1:pcie02]
> input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> ACPI: Power Button (FF) [PWRF]
> input: Sleep Button (CM) as
> /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
> ACPI: Sleep Button (CM) [SLPB]
> input: Power Button (CM) as
> /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
> ACPI: Power Button (CM) [PWRB]
> ACPI: SSDT CF45EC10, 02CC (r1 AMI IST 1 MSFT 3000001)
> ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
> ACPI: ACPI0007:00 is registered as cooling_device0
> ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
> ACPI: ACPI0007:01 is registered as cooling_device1
> hpet_resources: 0xfed00000 is busy
> Linux agpgart interface v0.103
> agpgart: Detected an Intel G33 Chipset.
> agpgart: Detected 7164K stolen memory.
> Switched to high resolution mode on CPU 1
> Switched to high resolution mode on CPU 0
> agpgart: AGP aperture is 256M @ 0xd0000000
> Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60
> seconds).
> Hangcheck: Using get_cycles().
> intelfb: Framebuffer driver for Intel(R)
> 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
> intelfb: Version 0.9.4
> Driver 'sd' needs updating - please use bus_type methods
> ata_piix 0000:00:1f.1: version 2.12
> ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:1f.1 to 64
> scsi0 : ata_piix
> scsi1 : ata_piix
> ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0f0 irq 14
> ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf0f8 irq 15
> ata1.00: ATAPI: ASUS DRW-1814BL, 1.13, max UDMA/66
> ata1.00: configured for UDMA/66
> ata2: port disabled. ignoring.
> scsi 0:0:0:0: CD-ROM ASUS DRW-1814BL 1.13 PQ: 0 ANSI: 5
> ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
> ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
> PCI: Setting latency timer of device 0000:00:1f.2 to 64
> scsi2 : ata_piix
> scsi3 : ata_piix
> ata3: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 17
> ata4: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 17
> ata3.00: ATA-7: Maxtor 7L250S0, BACE1G10, max UDMA/133
> ata3.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 0/32)
> ata3.00: configured for UDMA/133
> ata4.00: ATA-7: Maxtor 7L250S0, BACE1G10, max UDMA/133
> ata4.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 0/32)
> ata4.00: configured for UDMA/133
> scsi 2:0:0:0: Direct-Access ATA Maxtor 7L250S0 BACE PQ: 0 ANSI: 5
> sd 2:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB)
> sd 2:0:0:0: [sda] Write Protect is off
> sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
> DPO or FUA
> sd 2:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB)
> sd 2:0:0:0: [sda] Write Protect is off
> sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
> DPO or FUA
> sda: sda1 sda2 sda3 < sda5 >
> sd 2:0:0:0: [sda] Attached SCSI disk
> scsi 3:0:0:0: Direct-Access ATA Maxtor 7L250S0 BACE PQ: 0 ANSI: 5
> sd 3:0:0:0: [sdb] 488281250 512-byte hardware sectors (250000 MB)
> sd 3:0:0:0: [sdb] Write Protect is off
> sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
> DPO or FUA
> sd 3:0:0:0: [sdb] 488281250 512-byte hardware sectors (250000 MB)
> sd 3:0:0:0: [sdb] Write Protect is off
> sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
> DPO or FUA
> sdb: sdb1 sdb2 sdb3 < sdb5 >
> sd 3:0:0:0: [sdb] Attached SCSI disk
> ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
> PCI: Setting latency timer of device 0000:00:1d.7 to 64
> ehci_hcd 0000:00:1d.7: EHCI Host Controller
> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:1d.7: debug port 1
> PCI: cache line size of 32 is not supported by device 0000:00:1d.7
> ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff984000
> ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 8 ports detected
> USB Universal Host Controller Interface driver v3.0
> ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
> PCI: Setting latency timer of device 0000:00:1d.0 to 64
> uhci_hcd 0000:00:1d.0: UHCI Host Controller
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
> uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
> PCI: Setting latency timer of device 0000:00:1d.1 to 64
> uhci_hcd 0000:00:1d.1: UHCI Host Controller
> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
> uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:00:1d.2 to 64
> uhci_hcd 0000:00:1d.2: UHCI Host Controller
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
> uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
> usb usb4: configuration #1 chosen from 1 choice
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:1d.3 to 64
> uhci_hcd 0000:00:1d.3: UHCI Host Controller
> uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
> uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
> usb usb5: configuration #1 chosen from 1 choice
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
> PNP: PS/2 appears to have AUX port disabled, if this is incorrect please
> boot with i8042.nopnp
> serio: i8042 KBD port at 0x60,0x64 irq 1
> mice: PS/2 mouse device common for all mice
> usb 1-2: new high speed USB device using ehci_hcd and address 3
> rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
> rtc0: alarms up to one year, y3k
> i2c /dev entries driver
> md: raid0 personality registered for level 0
> md: raid1 personality registered for level 1
> md: raid10 personality registered for level 10
> input: AT Translated Set 2 keyboard as
> /devices/platform/i8042/serio0/input/input3
> raid6: int64x1 2069 MB/s
> usb 1-2: configuration #1 chosen from 1 choice
> hub 1-2:1.0: USB hub found
> hub 1-2:1.0: 4 ports detected
> raid6: int64x2 2606 MB/s
> raid6: int64x4 2493 MB/s
> raid6: int64x8 2015 MB/s
> raid6: sse2x1 3509 MB/s
> raid6: sse2x2 3917 MB/s
> usb 2-1: new low speed USB device using uhci_hcd and address 2
> raid6: sse2x4 6646 MB/s
> raid6: using algorithm sse2x4 (6646 MB/s)
> md: raid6 personality registered for level 6
> md: raid5 personality registered for level 5
> md: raid4 personality registered for level 4
> EDAC MC: Ver: 2.1.0 Apr 25 2008
> cpuidle: using governor ladder
> cpuidle: using governor menu
> TCP cubic registered
> NET: Registered protocol family 1
> Marking TSC unstable due to TSC halts in idle
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> NET: Registered protocol family 17
> registered taskstats version 1
> rtc_cmos 00:08: setting system clock to 2008-04-28 12:43:41 UTC (1209386621)
> md: Autodetecting RAID arrays.
> md: invalid raid superblock magic on sda5
> md: sda5 does not have a valid v0.90 superblock, not importing!
> usb 2-1: configuration #1 chosen from 1 choice
> md: invalid raid superblock magic on sdb5
> md: sdb5 does not have a valid v0.90 superblock, not importing!
> md: Scanned 4 and added 2 devices.
> md: autorun ...
> md: considering sdb1 ...
> md: adding sdb1 ...
> md: adding sda1 ...
> md: created md0
> md: bind<sda1>
> md: bind<sdb1>
> md: running: <sdb1><sda1>
> raid1: raid set md0 active with 2 out of 2 mirrors
> md: ... autorun DONE.
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> VFS: Mounted root (ext3 filesystem) readonly.
> Freeing unused kernel memory: 248k freed
> SELinux:8192 avtab hash slots allocated. Num of rules:71699
> SELinux:8192 avtab hash slots allocated. Num of rules:71699
> security: 7 users, 7 roles, 1457 types, 61 bools
> security: 69 classes, 71699 rules
> SELinux: Completing initialization.
> SELinux: Setting up existing superblocks.
> SELinux: initialized (dev md0, type ext3), uses xattr
> SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
> SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
> SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
> SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
> SELinux: initialized (dev devpts, type devpts), uses transition SIDs
> SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
> SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses
> genfs_contexts
> SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
> SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
> SELinux: initialized (dev proc, type proc), uses genfs_contexts
> SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
> SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
> SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> SELinux: policy loaded with handle_unknown=deny
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
> r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
> ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
> PCI: Setting latency timer of device 0000:03:00.0 to 64
> eth0: RTL8168b/8111b at 0xffffc20000020000, 00:1c:c0:34:06:c9, XID 38500000
> IRQ 380
> udev: renamed network interface eth0 to mobo
> ACPI Exception (video-1613): AE_NOT_FOUND, Evaluating _DOD [20070126]
> input: Video Bus as
> /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:17/input/input4
> FDC 0 is a post-1991 82077
> iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
> iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
> iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> Driver 'sr' needs updating - please use bus_type methods
> sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.20
> sr 0:0:0:0: Attached scsi CD-ROM sr0
> 8139too Fast Ethernet driver 0.9.28
> ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 21 (level, low) -> IRQ 21
> eth0: RealTek RTL8139 at 0xffffc20000022000, 00:c1:28:01:d5:f6, IRQ 21
> eth0: Identified 8139 chip type 'RTL-8139C'
> sr 0:0:0:0: Attached scsi generic sg0 type 5
> sd 2:0:0:0: Attached scsi generic sg1 type 0
> sd 3:0:0:0: Attached scsi generic sg2 type 0
> ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
> udev: renamed network interface eth0 to rtl
> input: Logitech USB RECEIVER as
> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input5
> input: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-1
> usbcore: registered new interface driver usbhid
> drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
> ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:1b.0 to 64
> hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> printk: 21 messages suppressed.
> Adding 2008116k swap on /dev/sda2. Priority:-1 extents:1 across:2008116k
> Adding 2008116k swap on /dev/sdb2. Priority:-2 extents:1 across:2008116k
> EXT3 FS on md0, internal journal
> w83627ehf: Found W83627DHG chip at 0x290
> coretemp coretemp.0: Using relative temperature scale!
> coretemp coretemp.1: Using relative temperature scale!
> device-mapper: uevent: version 1.0.3
> device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
> dm-devel@redhat.com
> md: md3 stopped.
> md: bind<sda5>
> md: bind<sdb5>
> md: md3: raid array is not clean -- starting background reconstruction
> raid1: raid set md3 active with 2 out of 2 mirrors
> md: resync of RAID array md3
> md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
> md: using maximum available idle IO bandwidth (but not more than 200000
> KB/sec) for resync.
> md: using 128k window, over a total of 240235840 blocks.
> md: resuming resync of md3 from checkpoint.
> fuse init (API version 7.9)
> SELinux: initialized (dev fusectl, type fusectl), not configured for
> labeling
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on dm-0, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> SELinux: initialized (dev dm-0, type ext3), uses xattr
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on dm-1, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> SELinux: initialized (dev dm-1, type ext3), uses xattr
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on dm-2, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> SELinux: initialized (dev dm-2, type ext3), uses xattr
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on dm-3, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> SELinux: initialized (dev dm-3, type ext3), uses xattr
> printk: 129 messages suppressed.
> NET: Registered protocol family 15
> printk: 15 messages suppressed.
> ip_tables: (C) 2000-2006 Netfilter Core Team
> nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> r8169: mobo: link up
> r8169: mobo: link up
> rtl: link down
> ADDRCONF(NETDEV_UP): rtl: link is not ready
> printk: 111 messages suppressed.
> ttyS1: LSR safety check engaged!
> ttyS1: LSR safety check engaged!
>
> lspci -vvvnn:
> =============
>
> 00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM
> Controller [8086:29c0] (rev 02)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort+ >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: [e0] Vendor Specific Information <?>
> Kernel driver in use: agpgart-intel
>
> 00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI
> Express Root Port [8086:29c1] (rev 02)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [88] Subsystem: Intel Corporation Device [8086:0000]
> Capabilities: [80] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
> Enable+
> Address: fee0300c Data: 4159
> Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> ExtTag- RBE+ FLReset-
> DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us,
> L1 <8us
> ClockPM- Suprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt-
> ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
> Slot # 0, PowerLimit 0.000000; Interlock- NoCompl+
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Off, PwrInd On, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
> Changed: MRL- PresDet- LinkState-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Kernel driver in use: pcieport-driver
>
> 00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31
> Express Integrated Graphics Controller [8086:29c2] (rev 02)
> Subsystem: Intel Corporation 82G33/G31 Express Integrated Graphics
> Controller [8086:29c2]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at ff900000 (32-bit, non-prefetchable) [size=512K]
> Region 1: I/O ports at f140 [size=8]
> Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
> Region 3: Memory at ff600000 (32-bit, non-prefetchable) [size=1M]
> Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
> Enable-
> Address: 00000000 Data: 0000
> Capabilities: [d0] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
> Definition Audio Controller [8086:27d8] (rev 01)
> Subsystem: Intel Corporation Device [8086:d608]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at ff980000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
> Enable-
> Address: 0000000000000000 Data: 0000
> Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> ExtTag- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
> LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns,
> L1 <1us
> ClockPM- Suprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt-
> ABWMgmt-
> Kernel driver in use: HDA Intel
> Kernel modules: snd-hda-intel
>
> 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
> Express Port 1 [8086:27d0] (rev 01)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1
> unlimited
> ExtTag- RBE- FLReset-
> DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
> LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1
> <4us
> ClockPM- Suprise- LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt-
> ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
> Slot # 1, PowerLimit 10.000000; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
> Changed: MRL- PresDet- LinkState-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
> Enable+
> Address: fee0300c Data: 4161
> Capabilities: [90] Subsystem: Intel Corporation 82801G (ICH7 Family) PCI
> Express Port 1 [8086:27d0]
> Capabilities: [a0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: pcieport-driver
>
> 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
> Express Port 2 [8086:27d2] (rev 01)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> I/O behind bridge: 0000e000-0000efff
> Memory behind bridge: ff800000-ff8fffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1
> unlimited
> ExtTag- RBE- FLReset-
> DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
> LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns,
> L1 <4us
> ClockPM- Suprise- LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt-
> ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
> Slot # 2, PowerLimit 10.000000; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> Changed: MRL- PresDet+ LinkState+
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
> Enable+
> Address: fee0300c Data: 4169
> Capabilities: [90] Subsystem: Intel Corporation 82801G (ICH7 Family) PCI
> Express Port 2 [8086:27d2]
> Capabilities: [a0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: pcieport-driver
>
> 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB
> UHCI Controller #1 [8086:27c8] (rev 01)
> Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1
> [8086:27c8]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 23
> Region 4: I/O ports at f080 [size=32]
> Kernel driver in use: uhci_hcd
>
> 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB
> UHCI Controller #2 [8086:27c9] (rev 01)
> Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2
> [8086:27c9]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 19
> Region 4: I/O ports at f060 [size=32]
> Kernel driver in use: uhci_hcd
>
> 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB
> UHCI Controller #3 [8086:27ca] (rev 01)
> Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3
> [8086:27ca]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin C routed to IRQ 18
> Region 4: I/O ports at f040 [size=32]
> Kernel driver in use: uhci_hcd
>
> 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB
> UHCI Controller #4 [8086:27cb] (rev 01)
> Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4
> [8086:27cb]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin D routed to IRQ 16
> Region 4: I/O ports at f020 [size=32]
> Kernel driver in use: uhci_hcd
>
> 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2
> EHCI Controller [8086:27cc] (rev 01) (prog-if 20)
> Subsystem: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller
> [8086:27cc]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 23
> Region 0: Memory at ff984000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Debug port: BAR=1 offset=00a0
> Kernel driver in use: ehci_hcd
>
> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e]
> (rev e1) (prog-if 01)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: ff700000-ff7fffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [50] Subsystem: Gammagraphx, Inc. Device [0000:0000]
>
> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC
> Interface Bridge [8086:27b8] (rev 01)
> Subsystem: Intel Corporation Device [8086:544e]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: [e0] Vendor Specific Information <?>
> Kernel modules: iTCO_wdt
>
> 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
> Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
> Subsystem: Intel Corporation 82801G (ICH7 Family) IDE Controller
> [8086:27df]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 16
> Region 0: I/O ports at 01f0 [size=8]
> Region 1: I/O ports at 03f4 [size=1]
> Region 2: I/O ports at 0170 [size=8]
> Region 3: I/O ports at 0374 [size=1]
> Region 4: I/O ports at f0f0 [size=16]
> Kernel driver in use: ata_piix
>
> 00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family)
> SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP
> PriO])
> Subsystem: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE
> Controller [8086:27c0]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 17
> Region 0: I/O ports at f0e0 [size=8]
> Region 1: I/O ports at f0d0 [size=4]
> Region 2: I/O ports at f0c0 [size=8]
> Region 3: I/O ports at f0b0 [size=4]
> Region 4: I/O ports at f0a0 [size=16]
> Capabilities: [70] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: ata_piix
>
> 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus
> Controller [8086:27da] (rev 01)
> Subsystem: Intel Corporation Device [8086:d608]
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin B routed to IRQ 17
> Region 4: I/O ports at f000 [size=32]
> Kernel driver in use: i801_smbus
> Kernel modules: i2c-i801
>
> 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
> RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
> Subsystem: Intel Corporation Device [8086:d608]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 380
> Region 0: I/O ports at e000 [size=256]
> Region 2: Memory at ff820000 (64-bit, non-prefetchable) [size=4K]
> Expansion ROM at ff800000 [disabled] [size=128K]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0-,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [48] Vital Product Data <?>
> Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1
> Enable+
> Address: 00000000fee0300c Data: 4189
> Capabilities: [60] Express (v1) Endpoint, MSI 00
> DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <128ns, L1
> unlimited
> ExtTag+ AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 4096 bytes
> DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited,
> L1 unlimited
> ClockPM- Suprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt-
> ABWMgmt-
> Capabilities: [84] Vendor Specific Information <?>
> Kernel driver in use: r8169
> Kernel modules: r8169
>
> 04:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
> RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
> Subsystem: Compex Device [11f6:8139]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (8000ns min, 16000ns max)
> Interrupt: pin A routed to IRQ 21
> Region 0: I/O ports at d000 [size=256]
> Region 1: Memory at ff700000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0-,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: 8139too
> Kernel modules: 8139too
>
>
> --
> ---------------------------------------------------------
> MTA SZTAKI Computer and Automation Research Institute
> Hungarian Academy of Sciences
> ---------------------------------------------------------
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
Thanks,
Oliver
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Solid freezes with 2.6.25
2008-04-28 14:54 ` Oliver Pinter
@ 2008-04-28 14:59 ` Gabor Gombas
0 siblings, 0 replies; 21+ messages in thread
From: Gabor Gombas @ 2008-04-28 14:59 UTC (permalink / raw)
To: Oliver Pinter; +Cc: linux-kernel, Ingo Molnar, Thomas Gleixner
On Mon, Apr 28, 2008 at 04:54:14PM +0200, Oliver Pinter wrote:
> [add CC]
I forgot my .config:
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25
# Mon Apr 28 10:36:47 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CPUSETS=y
# CONFIG_GROUP_SCHED is not set
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_PROC_PID_CPUSET is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_CLASSIC_RCU=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_IOMMU_HELPER=y
CONFIG_SWIOTLB=y
CONFIG_NR_CPUS=4
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MTRR=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
# CONFIG_ACPI_BAY is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_DMAR=y
CONFIG_DMAR_GFX_WA=y
CONFIG_DMAR_FLOPPY_WA=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_NET_IPGRE_BROADCAST is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
# CONFIG_NF_NAT_SNMP_BASIC is not set
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
# CONFIG_NF_NAT_IRC is not set
CONFIG_NF_NAT_TFTP=m
# CONFIG_NF_NAT_AMANDA is not set
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
# CONFIG_IP6_NF_RAW is not set
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=m
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_RR is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
# CONFIG_NET_ACT_NAT is not set
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_SIMPLE is not set
# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
#
# Selecting 'y' for an algorithm will
#
#
# build the algorithm into mac80211.
#
CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_RC_SIMPLE is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
# CONFIG_MAC80211_DEBUG is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_VIRTIO_BLK is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_RAID5_RESHAPE=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
CONFIG_REALTEK_PHY=m
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
CONFIG_R8169_NAPI=y
CONFIG_R8169_VLAN=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ATH5K is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VIRTIO_NET is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_PNP=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=y
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_CORETEMP=m
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
CONFIG_ITCO_WDT=m
# CONFIG_ITCO_VENDOR_SUPPORT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
# CONFIG_VIDEO_V4L1 is not set
# CONFIG_VIDEO_V4L1_COMPAT is not set
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_EFI is not set
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
CONFIG_FB_INTEL=y
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
# CONFIG_SND_HDA_CODEC_ATIHDMI is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# SoC Audio support for SuperH
#
#
# ALSA SoC audio for Freescale SOCs
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I5000 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_X86_MPPARSE=y
# CONFIG_IOMMU_DEBUG is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
# CONFIG_SECURITY_SELINUX_DISABLE is not set
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
# CONFIG_KVM_AMD is not set
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m
# CONFIG_VIRTIO_PCI is not set
CONFIG_VIRTIO_BALLOON=m
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
--
---------------------------------------------------------
MTA SZTAKI Computer and Automation Research Institute
Hungarian Academy of Sciences
---------------------------------------------------------
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Solid freezes with 2.6.25
2008-04-28 14:29 Solid freezes with 2.6.25 Gabor Gombas
2008-04-28 14:54 ` Oliver Pinter
@ 2008-04-28 16:25 ` Andrew Morton
2008-04-29 9:50 ` Bernhard Walle
2008-04-29 15:54 ` Bernhard Walle
2008-04-29 7:24 ` Gabor Gombas
2 siblings, 2 replies; 21+ messages in thread
From: Andrew Morton @ 2008-04-28 16:25 UTC (permalink / raw)
To: Gabor Gombas; +Cc: linux-kernel, Ingo Molnar, Thomas Gleixner, Bernhard Walle
On Mon, 28 Apr 2008 16:29:35 +0200 Gabor Gombas <gombasg@sztaki.hu> wrote:
> Hi,
>
> I'm seeing solid freezes with 2.6.25. 2.6.24.x works fine, 2.6.25 never
> had an uptime longer than 4-6 hours so far. netconsole captured the
> following:
>
> NMI Watchdog detected LOCKUP on CPU 1
> CPU 1
> Modules linked in: edd netconsole configfs i915 radeon drm rfcomm l2cap bluetooth xfrm_user xfrm4_tunnel tunnel4 ipcomp esp4 aead ah4 nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs ipt_ULOG microcode ipt_REJECT nf_conntrack_ipv4 xt_state nf_conntrack xt_tcpudp ipt_LOG xt_limit iptable_filter ip_tables x_tables deflate zlib_deflate zlib_inflate ctr twofish twofish_common camellia serpent blowfish des_generic cbc aes_x86_64 aes_generic xcbc sha256_generic sha1_generic md5 crypto_null af_key fuse dm_crypt crypto_blkcipher dm_snapshot dm_mirror dm_mod coretemp w83627ehf hwmon_vid snd_hda_intel snd_pcm 8250_pnp snd_timer 8250 sg snd 8139too serial_core video r8169 snd_page_alloc usbhid i2c_i801 sr_mod iTCO_wdt floppy cdrom [last unloaded: netconsole]
> Pid: 2535, comm: postgres Not tainted 2.6.25 #11
> RIP: 0010:[<ffffffff8021aa54>] [<ffffffff8021aa54>] hpet_rtc_interrupt+0x11a/0x2fd
> RSP: 0000:ffff81012fc77ec8 EFLAGS: 00200097
> RAX: 0000000000000000 RBX: 0000000000200002 RCX: 0000000000000000
> RDX: 000000000000c6c6 RSI: 0000000000200002 RDI: ffffffff80655ef8
> RBP: 000000010011144c R08: ffffffffff5fc128 R09: 0000000000000000
> R10: 0000000000200046 R11: 0000000000000000 R12: 00000000000000a6
> R13: ffff81012fcf8800 R14: 0000000000000000 R15: 0000000000000000
> FS: 0000000000000000(0000) GS:ffff81012fc0f480(0063) knlGS:00000000f7f228e0
> CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
> CR2: 00000000f1559000 CR3: 0000000128cd8000 CR4: 00000000000006e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process postgres (pid: 2535, threadinfo ffff810128d18000, task ffff81012cbb6930)
> Stack: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
> ffffffff00000000 0000000000000001 ffffffff806432c0 ffff81012fe25bc0
> 0000000000000000 0000000000000000 0000000000000008 ffffffff8025d6d0
> Call Trace:
> <IRQ> [<ffffffff8025d6d0>] ? handle_IRQ_event+0x25/0x53
> [<ffffffff8025ec3a>] ? handle_edge_irq+0xdd/0x11c
> [<ffffffff8020c0cc>] ? call_softirq+0x1c/0x28
> [<ffffffff8020e26a>] ? do_IRQ+0xf1/0x15f
> [<ffffffff8020b451>] ? ret_from_intr+0x0/0xa
> <EOI>
>
> Code: a0 28 00 bf 0a 00 00 00 48 89 c3 e8 73 6b ff ff 48 89 de 41 88 c4 48 c7 c7 f8 5e 65 80 e8 14 a1 28 00 45 84 e4 78 04 eb 12 f3 90 <48> 8b 05 25 1e 3e 00 48 29 e8 48 83 f8 04 76 ee 48 c7 c7 f8 5e
> ---[ end trace 8625c90c6582673f ]---
> Kernel panic - not syncing: Aiee, killing interrupt handler!
>
> Also, I have these messages in syslog:
>
> Apr 28 13:13:31 boogie kernel: rtc: lost 157 interrupts
> Apr 28 13:13:32 boogie kernel: rtc: lost 37 interrupts
> Apr 28 13:25:37 boogie kernel: rtc: lost 60 interrupts
>
> More info about the machine is attached. I've also seen similar hangs with
> 2.6.25-rc6 on an nforce4/Athlon64 box but I'm reluctant to re-test there
> because RAID rebuild takes too long.
I don't see any loop in hpet_rtc_interrupt() which can lock up so I assume
that for some reason we stop clearing the interrupt source and we
continuously reenter the interrupt handler.
I think this could also happen if someone runs
hpet_unregister_irq_handler() while the hpet is still active.
Ugly. If it was sanely reproducible then you could perhaps bisect it, but
two hours makes that unfeasible :(
Suspicion would have to be directed at the 2.6.25 CONFIG_HPET_EMULATE_RTC
changes.
I think our best bet here would be to persuade someone who knows what's
going on in there to prepare a debugging patch for you to run with
(please). See if we can find out what the code is doing at the time when
it freezes up.
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Solid freezes with 2.6.25
2008-04-28 14:29 Solid freezes with 2.6.25 Gabor Gombas
2008-04-28 14:54 ` Oliver Pinter
2008-04-28 16:25 ` Andrew Morton
@ 2008-04-29 7:24 ` Gabor Gombas
2008-04-29 7:37 ` Andrew Morton
2 siblings, 1 reply; 21+ messages in thread
From: Gabor Gombas @ 2008-04-29 7:24 UTC (permalink / raw)
To: linux-kernel
Cc: Andrew Morton, Ingo Molnar, Thomas Gleixner, Bernhard Walle,
Oliver Pinter
On Mon, Apr 28, 2008 at 04:29:35PM +0200, Gabor Gombas wrote:
> More info about the machine is attached. I've also seen similar hangs with
> 2.6.25-rc6 on an nforce4/Athlon64 box but I'm reluctant to re-test there
> because RAID rebuild takes too long.
Well, I accidentally booted 2.6.25 on that machine and it locked within
10 minutes. Machine details follow. On this machine however there are no
complaints about lost rtc interrupts.
More observations: on the Intel Core2 Duo box 2.6.25 feels much more
sluggish than 2.6.24.x. Under some I/O load I feel if I was typing
through a slow remote network link instead of sitting in front of the
console. Keys sometimes start to auto-repeat in gnome terminal even if I
just press them once. The AMD box does not feel so sluggish, but sound
playback sometimes becomes jerky a couple of seconds before the freeze.
Gabor
dmesg:
======
Linux version 2.6.25 (gombasg@twister) (gcc version 4.2.3 (Debian 4.2.3-3)) #5 Mon Apr 28 08:40:10 CEST 2008
Command line: root=/dev/md0 ro console=tty0 selinux=1 audit=1 hpet=force sata_nv.adma=0 resume=/dev/sda7 single
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS)
BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data)
BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 786416) 1 entries of 256 used
end_pfn_map = 1048576
DMI 2.3 present.
ACPI: RSDP 000F6E40, 0014 (r0 Nvidia)
ACPI: RSDT BFFF3000, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
ACPI: FACP BFFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
ACPI: DSDT BFFF30C0, 4C3F (r1 NVIDIA AWRDACPI 1000 MSFT 100000C)
ACPI: FACS BFFF0000, 0040
ACPI: MCFG BFFF7D80, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
ACPI: APIC BFFF7D00, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 786416) 1 entries of 256 used
early res: 0 [0-fff] BIOS data page
early res: 1 [200000-674907] TEXT DATA BSS
early res: 2 [9f800-a07ff] EBDA
early res: 3 [8000-cfff] PGTABLE
[ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
[ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
[ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
[ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
[ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
[ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
[ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
[ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
[ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
[ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
[ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
[ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
[ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
[ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
[ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
[ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
[ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
[ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
[ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
[ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 786416
On node 0 totalpages: 786319
DMA zone: 56 pages used for memmap
DMA zone: 1149 pages reserved
DMA zone: 2794 pages, LIFO batch:0
DMA32 zone: 10695 pages used for memmap
DMA32 zone: 771625 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 774419
Kernel command line: root=/dev/md0 ro console=tty0 selinux=1 audit=1 hpet=force sata_nv.adma=0 resume=/dev/sda7 single
audit: enabled (after initialization)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC calibrated against PM_TIMER
time.c: Detected 2010.293 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
Node 0: aperture @ 0 size 32 MB
No AGP bridge found
Memory: 3090536k/3145664k available (2573k kernel code, 54024k reserved, 1306k data, 224k init)
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 4023.11 BogoMIPS (lpj=8046220)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 00
ACPI: Core revision 20070126
Using local APIC timer interrupts.
APIC timer calibration result 12564324
Detected 12.564 MHz APIC timer.
net_namespace: 1000 bytes
xor: automatically using best checksumming function: generic_sse
generic_sse: 6447.000 MB/sec
xor: using function: generic_sse (6447.000 MB/sec)
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: Using MMCONFIG at d0000000 - dfffffff
PCI: Using configuration type 1
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: Force enabled HPET at 0xfed00000
PCI: Transparent bridge - 0000:00:09.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
ACPI: RTC can wake from S4
system 00:01: ioport range 0x1000-0x107f has been reserved
system 00:01: ioport range 0x1080-0x10ff has been reserved
system 00:01: ioport range 0x1400-0x147f has been reserved
system 00:01: ioport range 0x1480-0x14ff has been reserved
system 00:01: ioport range 0x1800-0x187f has been reserved
system 00:01: ioport range 0x1880-0x18ff has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x800-0x87f has been reserved
system 00:02: ioport range 0x295-0x314 has been reserved
system 00:02: ioport range 0x294-0x297 could not be reserved
system 00:0b: iomem range 0xd0000000-0xdfffffff could not be reserved
system 00:0c: iomem range 0xd0000-0xd3fff has been reserved
system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
system 00:0c: iomem range 0xbfff0000-0xbfffffff could not be reserved
system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0x100000-0xbffeffff could not be reserved
system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
PCI: Bridge: 0000:00:09.0
IO window: 7000-8fff
MEM window: 0xec000000-0xedffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
IO window: 9000-9fff
MEM window: 0xe8000000-0xe9ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
IO window: 5000-5fff
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: 6000-6fff
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
IO window: a000-afff
MEM window: 0xea000000-0xebffffff
PREFETCH window: 0x00000000e0000000-0x00000000e7ffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (enabled)
type=2000 audit(1209449491.336:1): initialized
SELinux: Registering netfilter hooks
async_tx: api initialized (sync-only)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Enabling HT MSI Mapping
pci 0000:00:0b.0: Enabling HT MSI Mapping
pci 0000:00:0b.0: Found enabled HT MSI Mapping
pci 0000:00:0b.0: Linking AER extended capability
pci 0000:00:0c.0: Enabling HT MSI Mapping
pci 0000:00:0c.0: Found enabled HT MSI Mapping
pci 0000:00:0c.0: Linking AER extended capability
pci 0000:00:0d.0: Enabling HT MSI Mapping
pci 0000:00:0d.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Linking AER extended capability
pci 0000:00:0e.0: Enabling HT MSI Mapping
pci 0000:00:0e.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: Linking AER extended capability
pci 0000:05:00.0: Boot video device
PCI: Setting latency timer of device 0000:00:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
Allocate Port Service[0000:00:0b.0:pcie03]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
Allocate Port Service[0000:00:0c.0:pcie03]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
Allocate Port Service[0000:00:0d.0:pcie03]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
Allocate Port Service[0000:00:0e.0:pcie03]
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: ACPI0007:00 is registered as cooling_device0
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux video capture interface: v2.00
Driver 'sd' needs updating - please use bus_type methods
sata_sil 0000:01:09.0: version 2.3
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
sata_sil 0000:01:09.0: Applying R_ERR on DMA activate FIS errata fix
scsi0 : sata_sil
scsi1 : sata_sil
scsi2 : sata_sil
scsi3 : sata_sil
ata1: SATA max UDMA/100 mmio m1024@0xed006000 tf 0xed006080 irq 17
ata2: SATA max UDMA/100 mmio m1024@0xed006000 tf 0xed0060c0 irq 17
ata3: SATA max UDMA/100 mmio m1024@0xed006000 tf 0xed006280 irq 17
ata4: SATA max UDMA/100 mmio m1024@0xed006000 tf 0xed0062c0 irq 17
ata1: SATA link down (SStatus 0 SControl 310)
Switched to high resolution mode on CPU 0
ata2: SATA link down (SStatus 0 SControl 310)
ata3: SATA link down (SStatus 0 SControl 310)
ata4: SATA link down (SStatus 0 SControl 310)
sata_nv 0000:00:07.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:07.0 to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xc800 irq 23
ata6: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xc808 irq 23
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATA-7: Maxtor 6B250S0, BANC1G10, max UDMA/133
ata5.00: 490234752 sectors, multi 16: LBA48 NCQ (not used)
ata5.00: configured for UDMA/133
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATA-7: Maxtor 6B250S0, BANC1G10, max UDMA/133
ata6.00: 490234752 sectors, multi 16: LBA48 NCQ (not used)
ata6.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA Maxtor 6B250S0 BANC PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
sd 4:0:0:0: [sda] Attached SCSI disk
scsi 5:0:0:0: Direct-Access ATA Maxtor 6B250S0 BANC PQ: 0 ANSI: 5
sd 5:0:0:0: [sdb] 490234752 512-byte hardware sectors (251000 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdb] 490234752 512-byte hardware sectors (251000 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 >
sd 5:0:0:0: [sdb] Attached SCSI disk
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:08.0 to 64
scsi6 : sata_nv
scsi7 : sata_nv
ata7: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xdc00 irq 22
ata8: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xdc08 irq 22
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.00: ATA-7: SAMSUNG SP2504C, VT100-33, max UDMA7
ata7.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata7.00: configured for UDMA/133
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8.00: ATA-7: SAMSUNG SP2504C, VT100-33, max UDMA7
ata8.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata8.00: configured for UDMA/133
scsi 6:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5
sd 6:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 sdc8 >
sd 6:0:0:0: [sdc] Attached SCSI disk
scsi 7:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5
sd 7:0:0:0: [sdd] 488397168 512-byte hardware sectors (250059 MB)
sd 7:0:0:0: [sdd] Write Protect is off
sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdd] 488397168 512-byte hardware sectors (250059 MB)
sd 7:0:0:0: [sdd] Write Protect is off
sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1 sdd2 < sdd5 sdd6 sdd7 sdd8 >
sd 7:0:0:0: [sdd] Attached SCSI disk
pata_amd 0000:00:06.0: version 0.3.10
PCI: Setting latency timer of device 0000:00:06.0 to 64
scsi8 : pata_amd
scsi9 : pata_amd
ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ata9.00: ATAPI: ASUS DVD-ROM E616, 2.0, max UDMA/100
ata9: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc600c500) ACPI=0x3f01f (20:600:0x13)
ata9.00: configured for UDMA/100
ata10.00: ATAPI: ASUS DRW-1608P, 1.57, max UDMA/66
ata10: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc600c500) ACPI=0x1f01f (30:600:0x13)
ata10.00: configured for UDMA/66
scsi 8:0:0:0: CD-ROM ASUS DVD-ROM E616 2.0 PQ: 0 ANSI: 5
scsi 9:0:0:0: CD-ROM ASUS DRW-1608P 1.57 PQ: 0 ANSI: 5
usbcore: registered new interface driver libusual
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k
i2c /dev entries driver
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int64x1 1845 MB/s
raid6: int64x2 2368 MB/s
raid6: int64x4 2305 MB/s
raid6: int64x8 2051 MB/s
raid6: sse2x1 2604 MB/s
raid6: sse2x2 3500 MB/s
raid6: sse2x4 3745 MB/s
raid6: using algorithm sse2x4 (3745 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
EDAC MC: Ver: 2.1.0 Apr 28 2008
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.16rc2 (Thu Jan 31 16:40:16 2008 UTC).
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6
powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12
rtc_cmos 00:04: setting system clock to 2008-04-29 06:11:36 UTC (1209449496)
md: Autodetecting RAID arrays.
md: Scanned 16 and added 16 devices.
md: autorun ...
md: considering sdd8 ...
md: adding sdd8 ...
md: sdd6 has different UUID to sdd8
md: sdd5 has different UUID to sdd8
md: sdd1 has different UUID to sdd8
md: adding sdc8 ...
md: sdc6 has different UUID to sdd8
md: sdc5 has different UUID to sdd8
md: sdc1 has different UUID to sdd8
md: adding sdb8 ...
md: sdb6 has different UUID to sdd8
md: sdb5 has different UUID to sdd8
md: sdb1 has different UUID to sdd8
md: adding sda8 ...
md: sda6 has different UUID to sdd8
md: sda5 has different UUID to sdd8
md: sda1 has different UUID to sdd8
md: created md3
md: bind<sda8>
md: bind<sdb8>
md: bind<sdc8>
md: bind<sdd8>
md: running: <sdd8><sdc8><sdb8><sda8>
raid5: device sdd8 operational as raid disk 2
raid5: device sdc8 operational as raid disk 1
raid5: device sdb8 operational as raid disk 0
raid5: device sda8 operational as raid disk 3
raid5: allocated 4274kB for md3
raid5: raid level 5 set md3 active with 4 out of 4 devices, algorithm 2
RAID5 conf printout:
--- rd:4 wd:4
disk 0, o:1, dev:sdb8
disk 1, o:1, dev:sdc8
disk 2, o:1, dev:sdd8
disk 3, o:1, dev:sda8
md: considering sdd6 ...
md: adding sdd6 ...
md: sdd5 has different UUID to sdd6
md: sdd1 has different UUID to sdd6
md: adding sdc6 ...
md: sdc5 has different UUID to sdd6
md: sdc1 has different UUID to sdd6
md: adding sdb6 ...
md: sdb5 has different UUID to sdd6
md: sdb1 has different UUID to sdd6
md: adding sda6 ...
md: sda5 has different UUID to sdd6
md: sda1 has different UUID to sdd6
md: created md2
md: bind<sda6>
md: bind<sdb6>
md: bind<sdc6>
md: bind<sdd6>
md: running: <sdd6><sdc6><sdb6><sda6>
raid5: device sdd6 operational as raid disk 2
raid5: device sdc6 operational as raid disk 1
raid5: device sdb6 operational as raid disk 0
raid5: device sda6 operational as raid disk 3
raid5: allocated 4274kB for md2
raid5: raid level 5 set md2 active with 4 out of 4 devices, algorithm 2
RAID5 conf printout:
--- rd:4 wd:4
disk 0, o:1, dev:sdb6
disk 1, o:1, dev:sdc6
disk 2, o:1, dev:sdd6
disk 3, o:1, dev:sda6
md: considering sdd5 ...
md: adding sdd5 ...
md: sdd1 has different UUID to sdd5
md: adding sdc5 ...
md: sdc1 has different UUID to sdd5
md: adding sdb5 ...
md: sdb1 has different UUID to sdd5
md: adding sda5 ...
md: sda1 has different UUID to sdd5
md: created md1
md: bind<sda5>
md: bind<sdb5>
md: bind<sdc5>
md: bind<sdd5>
md: running: <sdd5><sdc5><sdb5><sda5>
raid5: device sdd5 operational as raid disk 2
raid5: device sdc5 operational as raid disk 1
raid5: device sdb5 operational as raid disk 0
raid5: device sda5 operational as raid disk 3
raid5: allocated 4274kB for md1
raid5: raid level 5 set md1 active with 4 out of 4 devices, algorithm 2
RAID5 conf printout:
--- rd:4 wd:4
disk 0, o:1, dev:sdb5
disk 1, o:1, dev:sdc5
disk 2, o:1, dev:sdd5
disk 3, o:1, dev:sda5
md: considering sdd1 ...
md: adding sdd1 ...
md: adding sdc1 ...
md: adding sdb1 ...
md: adding sda1 ...
md: created md0
md: bind<sda1>
md: bind<sdb1>
md: bind<sdc1>
md: bind<sdd1>
md: running: <sdd1><sdc1><sdb1><sda1>
raid1: raid set md0 active with 4 out of 4 mirrors
md: ... autorun DONE.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 224k freed
SELinux:8192 avtab hash slots allocated. Num of rules:20226
SELinux:8192 avtab hash slots allocated. Num of rules:20226
security: 3 users, 7 roles, 949 types, 21 bools, 1 sens, 1024 cats
security: 60 classes, 20226 rules
security: class memprotect not defined in policy
security: class peer not defined in policy
security: class capability2 not defined in policy
security: permission recvfrom in class node not defined in policy
security: permission sendto in class node not defined in policy
security: permission ingress in class netif not defined in policy
security: permission egress in class netif not defined in policy
security: permission setfcap in class capability not defined in policy
security: permission flow_in in class packet not defined in policy
security: permission flow_out in class packet not defined in policy
security: permission forward_in in class packet not defined in policy
security: permission forward_out in class packet not defined in policy
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev md0, type ext3), uses xattr
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: policy loaded with handle_unknown=deny
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 6x/48x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 8:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
sr 9:0:0:0: Attached scsi CD-ROM sr1
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 5:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 7:0:0:0: Attached scsi generic sg3 type 0
sr 8:0:0:0: Attached scsi generic sg4 type 5
sr 9:0:0:0: Attached scsi generic sg5 type 5
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 21, io mem 0xee001000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 20, io mem 0xfeb00000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
IT8712 SuperIO detected.
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
saa7134[0]: found at 0000:01:07.0, rev: 1, irq: 19, latency: 32, mmio: 0xed004000
saa7134[0]: subsystem: 5168:0138, board: LifeView FlyVIDEO3000 [card=2,autodetected]
saa7134[0]: board init: gpio is 39000
saa7134[0]: there are different flyvideo cards with different tuners
saa7134[0]: out there, you might have to use the tuner=<nr> insmod
saa7134[0]: option to override the default value.
input: saa7134 IR (LifeView FlyVIDEO30 as /class/input/input2
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:04.0 to 64
saa7134[0]: i2c eeprom 00: 68 51 38 01 10 28 ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner' 2-0061: chip found @ 0xc2 (saa7134[0])
tuner-simple 2-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
saa7134[0]: registered device radio0
intel8x0_measure_ac97_clock: measured 54697 usecs
intel8x0: clocking to 46883
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x3f1 @ 7, addr 00:0f:ea:89:f7:47
forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
firewire_ohci: Added fw-ohci device 0000:01:0a.0, OHCI version 1.10
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.21 addr 0xe9000000 irq 17 Yukon-EC (0xb6) rev 1
sky2 eth1: addr 00:0f:ea:89:f7:33
udev: renamed network interface eth0 to nvidia
udev: renamed network interface eth1 to marvel
usb 2-5: new high speed USB device using ehci_hcd and address 4
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
usb 2-5: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
usb 1-1: new full speed USB device using ohci_hcd and address 2
firewire_core: created device fw0: GUID 000fea5600877d37, S800
usb 1-1: configuration #1 chosen from 1 choice
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usb 1-4: new low speed USB device using ohci_hcd and address 3
usb 1-4: configuration #1 chosen from 1 choice
input: Microsoft Microsoft Wireless Optical DesktopŽ 1.00 as /class/input/input3
input: USB HID v1.11 Keyboard [Microsoft Microsoft Wireless Optical DesktopŽ 1.00] on usb-0000:00:02.0-4
input: Microsoft Microsoft Wireless Optical DesktopŽ 1.00 as /class/input/input4
printk: 39 messages suppressed.
Adding 979924k swap on /dev/sda7. Priority:1 extents:1 across:979924k
Adding 979924k swap on /dev/sdb7. Priority:1 extents:1 across:979924k
input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical DesktopŽ 1.00] on usb-0000:00:02.0-4
scsi10 : SCSI emulation for USB Mass Storage devices
Adding 979924k swap on /dev/sdc7. Priority:1 extents:1 across:979924k
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver hci_usb
Adding 979924k swap on /dev/sdd7. Priority:1 extents:1 across:979924k
EXT3 FS on md0, internal journal
it87: Found IT8712F chip at 0x290, revision 5
ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:05:00.0 to 64
[drm] Initialized radeon 1.28.0 20060524 on minor 0
saa7134 ALSA driver for DMA sound loaded
saa7134[0]/alsa: saa7134[0] at 0xed004000 irq 19 registered as card -1
scsi 10:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
sd 10:0:0:0: [sde] Attached SCSI removable disk
sd 10:0:0:0: Attached scsi generic sg6 type 0
scsi 10:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
sd 10:0:0:1: [sdf] Attached SCSI removable disk
sd 10:0:0:1: Attached scsi generic sg7 type 0
scsi 10:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
sd 10:0:0:2: [sdg] Attached SCSI removable disk
sd 10:0:0:2: Attached scsi generic sg8 type 0
scsi 10:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 10:0:0:3: [sdh] Attached SCSI removable disk
sd 10:0:0:3: Attached scsi generic sg9 type 0
usb-storage: device scan complete
fuse init (API version 7.9)
SELinux: initialized (dev fusectl, type fusectl), not configured for labeling
printk: 21 messages suppressed.
kjournald starting. Commit interval 5 seconds
EXT3 FS on md1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev md1, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on md2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev md2, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on md3, internal journal
EXT3-fs warning (device md3): ext3_orphan_get: bad orphan inode 14624049! e2fsck was run?
ext3_test_bit(bit=1328, block=116998209) = -1
inode=ffff8100bf799980
is_bad_inode(inode)=0
NEXT_ORPHAN(inode)=1209449507
max_ino=22306816
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev md3, type ext3), uses xattr
sky2 marvel: enabling interface
ADDRCONF(NETDEV_UP): marvel: link is not ready
nvidia: no link during initialization.
ADDRCONF(NETDEV_UP): nvidia: link is not ready
printk: 114 messages suppressed.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
lspci -vvvnn:
=============
00:00.0 Memory controller [0580]: nVidia Corporation CK804 Memory Controller [10de:005e] (rev a3)
Subsystem: Giga-byte Technology Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 1.03
Link Frequency 0: 1.0GHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
00:01.0 ISA bridge [0601]: nVidia Corporation CK804 ISA Bridge [10de:0050] (rev a3)
Subsystem: Giga-byte Technology Device [1458:0c11]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 SMBus [0c05]: nVidia Corporation CK804 SMBus [10de:0052] (rev a2)
Subsystem: Giga-byte Technology Device [1458:0c11]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at e000 [size=32]
Region 4: I/O ports at 1c00 [size=64]
Region 5: I/O ports at 1c40 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: nForce2_smbus
00:02.0 USB Controller [0c03]: nVidia Corporation CK804 USB Controller [10de:005a] (rev a2) (prog-if 10)
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at ee001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:02.1 USB Controller [0c03]: nVidia Corporation CK804 USB Controller [10de:005b] (rev a3) (prog-if 20)
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 20
Region 0: Memory at feb00000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=0098
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:04.0 Multimedia audio controller [0401]: nVidia Corporation CK804 AC'97 Audio Controller [10de:0059] (rev a2)
Subsystem: Giga-byte Technology Device [1458:ae01]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at b000 [size=256]
Region 1: I/O ports at b400 [size=256]
Region 2: Memory at ee004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
00:06.0 IDE interface [0101]: nVidia Corporation CK804 IDE [10de:0053] (rev f2) (prog-if 8a [Master SecP PriP])
Subsystem: Device [f458:5002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_amd
00:07.0 IDE interface [0101]: nVidia Corporation CK804 Serial ATA Controller [10de:0054] (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Device [1458:b003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at c800 [size=16]
Region 5: Memory at ee005000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: sata_nv
00:08.0 IDE interface [0101]: nVidia Corporation CK804 Serial ATA Controller [10de:0055] (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Device [1458:b003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 09e0 [size=8]
Region 1: I/O ports at 0be0 [size=4]
Region 2: I/O ports at 0960 [size=8]
Region 3: I/O ports at 0b60 [size=4]
Region 4: I/O ports at dc00 [size=16]
Region 5: Memory at ee000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: sata_nv
00:09.0 PCI bridge [0604]: nVidia Corporation CK804 PCI Bridge [10de:005c] (rev a2) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00007000-00008fff
Memory behind bridge: ec000000-edffffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
00:0a.0 Bridge [0680]: nVidia Corporation CK804 Ethernet Controller [10de:0057] (rev a3)
Subsystem: Giga-byte Technology Device [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at ee002000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at e400 [size=8]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:0b.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0100c Data: 4149
Capabilities: [58] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x2, ASPM L0s, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 8, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport-driver
00:0c.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0100c Data: 4151
Capabilities: [58] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 4, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport-driver
00:0d.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0100c Data: 4159
Capabilities: [58] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 2, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport-driver
00:0e.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: ea000000-ebffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000e7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0100c Data: 4161
Capabilities: [58] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 1, PowerLimit 75.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport-driver
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:07.0 Multimedia controller [0480]: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder [1131:7134] (rev 01)
Subsystem: Animation Technologies Inc. Device [5168:0138]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: Memory at ed004000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=3 PME-
Kernel driver in use: saa7134
Kernel modules: saa7134
01:09.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller [1095:3114] (rev 02)
Subsystem: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller [1095:3114]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 7000 [size=8]
Region 1: I/O ports at 7400 [size=4]
Region 2: I/O ports at 7800 [size=8]
Region 3: I/O ports at 7c00 [size=4]
Region 4: I/O ports at 8000 [size=16]
Region 5: Memory at ed006000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: sata_sil
01:0a.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB82AA2 IEEE-1394b Link Layer Controller [104c:8025] (rev 01) (prog-if 10)
Subsystem: Giga-byte Technology Device [1458:1000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at ed005000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at ed000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] (rev 19)
Subsystem: Giga-byte Technology Device [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 283
Region 0: Memory at e9000000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 9000 [size=256]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data <?>
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0100c Data: 41a1
Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 unlimited
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting <?>
Kernel driver in use: sky2
Kernel modules: sky2
05:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV410 [Radeon X700 (PCIE)] [1002:5e4d]
Subsystem: Giga-byte Technology Device [1458:2106]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e0000000 (64-bit, prefetchable) [size=128M]
Region 2: Memory at eb000000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at a000 [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <128ns, L1 <2us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <128ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [100] Advanced Error Reporting <?>
05:00.1 Display controller [0380]: ATI Technologies Inc RV410 [Radeon X700 (PCIE)] (Secondary) [1002:5e6d]
Subsystem: Giga-byte Technology Device [1458:2107]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Region 0: Memory at eb010000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <128ns, L1 <2us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <128ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
config:
=======
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25
# Mon Apr 28 08:14:07 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_IOMMU_HELPER=y
CONFIG_SWIOTLB=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
#
# Memory hotplug is currently incompatible with Software Suspend
#
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MTRR=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
# CONFIG_COMPAT_VDSO is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="/dev/sda7"
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
# CONFIG_ACPI_BAY is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
# CONFIG_IP6_NF_RAW is not set
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
# CONFIG_IP_DCCP_TFRC_LIB is not set
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_RR is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
# CONFIG_NET_ACT_NAT is not set
CONFIG_NET_ACT_PEDIT=m
# CONFIG_NET_ACT_SIMP is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_LL is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=16
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_RAID5_RESHAPE=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_IFB=m
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=m
CONFIG_FORCEDETH_NAPI=y
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOL2TP=m
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
# CONFIG_VIDEO_V4L1 is not set
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_V4L_USB_DRIVERS is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_SI470X is not set
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_TUNER=m
# CONFIG_VIDEO_TUNER_CUSTOMIZE is not set
CONFIG_TUNER_XC2028=m
CONFIG_TUNER_MT20XX=m
CONFIG_TUNER_TDA8290=m
CONFIG_TUNER_TEA5761=m
CONFIG_TUNER_TEA5767=m
CONFIG_TUNER_SIMPLE=m
CONFIG_TUNER_TDA9887=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_EFI is not set
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# SoC Audio support for SuperH
#
#
# ALSA SoC audio for Freescale SOCs
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_SERIAL=m
# CONFIG_USB_EZUSB is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I5000 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso-8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_X86_MPPARSE=y
# CONFIG_IOMMU_DEBUG is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
# CONFIG_SECURITY_SELINUX_DISABLE is not set
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT=y
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
--
---------------------------------------------------------
MTA SZTAKI Computer and Automation Research Institute
Hungarian Academy of Sciences
---------------------------------------------------------
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Solid freezes with 2.6.25
2008-04-29 7:24 ` Gabor Gombas
@ 2008-04-29 7:37 ` Andrew Morton
2008-04-29 9:43 ` Gabor Gombas
0 siblings, 1 reply; 21+ messages in thread
From: Andrew Morton @ 2008-04-29 7:37 UTC (permalink / raw)
To: Gabor Gombas
Cc: linux-kernel, Ingo Molnar, Thomas Gleixner, Bernhard Walle,
Oliver Pinter, Rafael J. Wysocki
On Tue, 29 Apr 2008 09:24:23 +0200 Gabor Gombas <gombasg@sztaki.hu> wrote:
> On Mon, Apr 28, 2008 at 04:29:35PM +0200, Gabor Gombas wrote:
>
> > More info about the machine is attached. I've also seen similar hangs with
> > 2.6.25-rc6 on an nforce4/Athlon64 box but I'm reluctant to re-test there
> > because RAID rebuild takes too long.
>
> Well, I accidentally booted 2.6.25 on that machine and it locked within
> 10 minutes. Machine details follow. On this machine however there are no
> complaints about lost rtc interrupts.
>
> More observations: on the Intel Core2 Duo box 2.6.25 feels much more
> sluggish than 2.6.24.x. Under some I/O load I feel if I was typing
> through a slow remote network link instead of sitting in front of the
> console. Keys sometimes start to auto-repeat in gnome terminal even if I
> just press them once. The AMD box does not feel so sluggish, but sound
> playback sometimes becomes jerky a couple of seconds before the freeze.
I suspect you have two separate regressions here.
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Solid freezes with 2.6.25
2008-04-29 7:37 ` Andrew Morton
@ 2008-04-29 9:43 ` Gabor Gombas
0 siblings, 0 replies; 21+ messages in thread
From: Gabor Gombas @ 2008-04-29 9:43 UTC (permalink / raw)
To: Andrew Morton
Cc: linux-kernel, Ingo Molnar, Thomas Gleixner, Bernhard Walle,
Oliver Pinter, Rafael J. Wysocki
On Tue, Apr 29, 2008 at 12:37:47AM -0700, Andrew Morton wrote:
> I suspect you have two separate regressions here.
Maybe. But all I see on both boxes is that they freeze hard, Alt+SysRq
does not work, and nothing is logged to syslog. I don't have another
machine near the AMD box so I can't use netconsole there (and the NMI
watchdog does not work there anyway). And both boxes run fine with
2.6.24.x.
Gabor
--
---------------------------------------------------------
MTA SZTAKI Computer and Automation Research Institute
Hungarian Academy of Sciences
---------------------------------------------------------
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Solid freezes with 2.6.25
2008-04-28 16:25 ` Andrew Morton
@ 2008-04-29 9:50 ` Bernhard Walle
2008-04-29 9:53 ` Gabor Gombas
2008-04-29 15:54 ` Bernhard Walle
1 sibling, 1 reply; 21+ messages in thread
From: Bernhard Walle @ 2008-04-29 9:50 UTC (permalink / raw)
To: Andrew Morton; +Cc: Gabor Gombas, linux-kernel, Ingo Molnar, Thomas Gleixner
* Andrew Morton [2008-04-28 09:25]:
>
> Suspicion would have to be directed at the 2.6.25 CONFIG_HPET_EMULATE_RTC
> changes.
>
> I think our best bet here would be to persuade someone who knows what's
> going on in there to prepare a debugging patch for you to run with
> (please). See if we can find out what the code is doing at the time when
> it freezes up.
So the problem goes away if CONFIG_HPET_EMULATE_RTC is not set? I'm
trying to come up with a debug patch ...
Bernhard
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Solid freezes with 2.6.25
2008-04-29 9:50 ` Bernhard Walle
@ 2008-04-29 9:53 ` Gabor Gombas
0 siblings, 0 replies; 21+ messages in thread
From: Gabor Gombas @ 2008-04-29 9:53 UTC (permalink / raw)
To: Bernhard Walle; +Cc: Andrew Morton, linux-kernel, Ingo Molnar, Thomas Gleixner
On Tue, Apr 29, 2008 at 11:50:29AM +0200, Bernhard Walle wrote:
> So the problem goes away if CONFIG_HPET_EMULATE_RTC is not set? I'm
> trying to come up with a debug patch ...
Not sure, did not try that so far. During the day I have to do some real
work but I try to build a kernel with that option not set and boot it
when I leave at the evening.
Gabor
--
---------------------------------------------------------
MTA SZTAKI Computer and Automation Research Institute
Hungarian Academy of Sciences
---------------------------------------------------------
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Solid freezes with 2.6.25
2008-04-28 16:25 ` Andrew Morton
2008-04-29 9:50 ` Bernhard Walle
@ 2008-04-29 15:54 ` Bernhard Walle
2008-04-30 13:38 ` Gabor Gombas
1 sibling, 1 reply; 21+ messages in thread
From: Bernhard Walle @ 2008-04-29 15:54 UTC (permalink / raw)
To: Gabor Gombas; +Cc: Andrew Morton, linux-kernel, Ingo Molnar, Thomas Gleixner
Hi,
* Andrew Morton [2008-04-28 09:25]:
> >
> > NMI Watchdog detected LOCKUP on CPU 1
> > CPU 1
> > Modules linked in: edd netconsole configfs i915 radeon drm rfcomm l2cap bluetooth xfrm_user xfrm4_tunnel tunnel4 ipcomp esp4 aead ah4 nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs ipt_ULOG microcode ipt_REJECT nf_conntrack_ipv4 xt_state nf_conntrack xt_tcpudp ipt_LOG xt_limit iptable_filter ip_tables x_tables deflate zlib_deflate zlib_inflate ctr twofish twofish_common camellia serpent blowfish des_generic cbc aes_x86_64 aes_generic xcbc sha256_generic sha1_generic md5 crypto_null af_key fuse dm_crypt crypto_blkcipher dm_snapshot dm_mirror dm_mod coretemp w83627ehf hwmon_vid snd_hda_intel snd_pcm 8250_pnp snd_timer 8250 sg snd 8139too serial_core video r8169 snd_page_alloc usbhid i2c_i801 sr_mod iTCO_wdt floppy cdrom [last unloaded: netconsole]
> > Pid: 2535, comm: postgres Not tainted 2.6.25 #11
> > RIP: 0010:[<ffffffff8021aa54>] [<ffffffff8021aa54>] hpet_rtc_interrupt+0x11a/0x2fd
> > RSP: 0000:ffff81012fc77ec8 EFLAGS: 00200097
> > RAX: 0000000000000000 RBX: 0000000000200002 RCX: 0000000000000000
> > RDX: 000000000000c6c6 RSI: 0000000000200002 RDI: ffffffff80655ef8
> > RBP: 000000010011144c R08: ffffffffff5fc128 R09: 0000000000000000
> > R10: 0000000000200046 R11: 0000000000000000 R12: 00000000000000a6
> > R13: ffff81012fcf8800 R14: 0000000000000000 R15: 0000000000000000
> > FS: 0000000000000000(0000) GS:ffff81012fc0f480(0063) knlGS:00000000f7f228e0
> > CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
> > CR2: 00000000f1559000 CR3: 0000000128cd8000 CR4: 00000000000006e0
> > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> > Process postgres (pid: 2535, threadinfo ffff810128d18000, task ffff81012cbb6930)
> > Stack: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
> > ffffffff00000000 0000000000000001 ffffffff806432c0 ffff81012fe25bc0
> > 0000000000000000 0000000000000000 0000000000000008 ffffffff8025d6d0
> > Call Trace:
> > <IRQ> [<ffffffff8025d6d0>] ? handle_IRQ_event+0x25/0x53
> > [<ffffffff8025ec3a>] ? handle_edge_irq+0xdd/0x11c
> > [<ffffffff8020c0cc>] ? call_softirq+0x1c/0x28
> > [<ffffffff8020e26a>] ? do_IRQ+0xf1/0x15f
> > [<ffffffff8020b451>] ? ret_from_intr+0x0/0xa
> > <EOI>
> >
> > Code: a0 28 00 bf 0a 00 00 00 48 89 c3 e8 73 6b ff ff 48 89 de 41 88 c4 48 c7 c7 f8 5e 65 80 e8 14 a1 28 00 45 84 e4 78 04 eb 12 f3 90 <48> 8b 05 25 1e 3e 00 48 29 e8 48 83 f8 04 76 ee 48 c7 c7 f8 5e
> > ---[ end trace 8625c90c6582673f ]---
> > Kernel panic - not syncing: Aiee, killing interrupt handler!
> >
> > Also, I have these messages in syslog:
> >
> > Apr 28 13:13:31 boogie kernel: rtc: lost 157 interrupts
> > Apr 28 13:13:32 boogie kernel: rtc: lost 37 interrupts
> > Apr 28 13:25:37 boogie kernel: rtc: lost 60 interrupts
> >
> > More info about the machine is attached. I've also seen similar hangs with
> > 2.6.25-rc6 on an nforce4/Athlon64 box but I'm reluctant to re-test there
> > because RAID rebuild takes too long.
>
> I don't see any loop in hpet_rtc_interrupt() which can lock up so I assume
> that for some reason we stop clearing the interrupt source and we
> continuously reenter the interrupt handler.
Hm ..., can you mail /proc/interrupts of the affected system? According
to the HPET specification
General Interrupt Status Register Field Definitions
--------------------------------------------------------
T2_INT_STS Timer 2 Interrupt Active: Same functionality as Timer 0.
T1_INT_STS Timer 1 Interrupt Active: Same functionality as Timer 0.
T0_INT_STS Timer 0 Interrupt Active:
The functionality of this bit depends on whether the edge
or level-triggered mode is used for this timer:
If set to level-triggered mode:
This bit defaults to 0. This bit will be set by
hardware if the corresponding timer interrupt is
active. Once the bit is set, it can be cleared by
software writing a 1 to the same bit position.
Writes of 0 to this bit will have no effect. For
example, if the bit is already set a write of 0
will not clear the bit.
If set to edge-triggered mode:
This bit should be ignored by software. Software
should always write 0 to this bit.
--------------------------------------------------------
On all systems I checked the interrupt is edge-triggered. So, if your
interrupt is level triggered, that might be the cause.
> Suspicion would have to be directed at the 2.6.25 CONFIG_HPET_EMULATE_RTC
> changes.
Well, can you disable CONFIG_HPET_EMULATE_RTC entirely and try again?
> I think our best bet here would be to persuade someone who knows what's
> going on in there to prepare a debugging patch for you to run with
> (please). See if we can find out what the code is doing at the time when
> it freezes up.
Can you try that patch and see if the IRQ handler is really called
repeatedly in that case?
Bernhard
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -679,6 +679,9 @@ irqreturn_t hpet_rtc_interrupt(int irq,
{
struct rtc_time curr_time;
unsigned long rtc_int_flag = 0;
+ struct hpet __iomem *hpet = hpet_virt_address;
+
+ printk(KERN_INFO "status=%d\n", readl(&hpet->hpet_isr));
hpet_rtc_timer_reinit();
memset(&curr_time, 0, sizeof(struct rtc_time));
--- a/include/asm-x86/hpet.h
+++ b/include/asm-x86/hpet.h
@@ -35,6 +35,10 @@
#define HPET_LEGACY_8254 2
#define HPET_LEGACY_RTC 8
+#define HPET_T0_INT_STS (1<<0)
+#define HPET_T1_INT_STS (1<<1)
+#define HPET_T2_INT_STS (1<<2)
+
#define HPET_TN_LEVEL 0x0002
#define HPET_TN_ENABLE 0x0004
#define HPET_TN_PERIODIC 0x0008
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Solid freezes with 2.6.25
2008-04-29 15:54 ` Bernhard Walle
@ 2008-04-30 13:38 ` Gabor Gombas
2008-04-30 14:51 ` Bernhard Walle
0 siblings, 1 reply; 21+ messages in thread
From: Gabor Gombas @ 2008-04-30 13:38 UTC (permalink / raw)
To: Bernhard Walle; +Cc: Andrew Morton, linux-kernel, Ingo Molnar, Thomas Gleixner
On Tue, Apr 29, 2008 at 05:54:19PM +0200, Bernhard Walle wrote:
> Hm ..., can you mail /proc/interrupts of the affected system? According
> to the HPET specification
The Intel box:
CPU0 CPU1
0: 27346 29145 IO-APIC-edge timer
1: 842 819 IO-APIC-edge i8042
4: 2 2 IO-APIC-edge
6: 0 3 IO-APIC-edge floppy
8: 2 3 IO-APIC-edge rtc0
9: 0 0 IO-APIC-fasteoi acpi
14: 36 36 IO-APIC-edge ata_piix
15: 0 0 IO-APIC-edge ata_piix
16: 71 71 IO-APIC-fasteoi uhci_hcd:usb5, HDA Intel
17: 49357 47537 IO-APIC-fasteoi ata_piix
18: 0 0 IO-APIC-fasteoi uhci_hcd:usb4
19: 0 0 IO-APIC-fasteoi uhci_hcd:usb3
21: 0 0 IO-APIC-fasteoi rtl
23: 28 29 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2
380: 332 338 PCI-MSI-edge mobo
NMI: 645 573 Non-maskable interrupts
LOC: 58828 55631 Local timer interrupts
RES: 78518 83802 Rescheduling interrupts
CAL: 477 492 function call interrupts
TLB: 1079 1084 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
SPU: 0 0 Spurious interrupts
ERR: 0
The AMD box:
CPU0
0: 36 IO-APIC-edge timer
1: 2 IO-APIC-edge i8042
3: 3 IO-APIC-edge
4: 2 IO-APIC-edge
6: 3 IO-APIC-edge floppy
7: 1 IO-APIC-edge parport0
8: 1 IO-APIC-edge rtc0
9: 0 IO-APIC-fasteoi acpi
14: 53 IO-APIC-edge pata_amd
15: 73 IO-APIC-edge pata_amd
17: 0 IO-APIC-fasteoi sata_sil
18: 3 IO-APIC-fasteoi firewire_ohci
19: 0 IO-APIC-fasteoi saa7134[0], saa7134[0]
20: 424 IO-APIC-fasteoi ehci_hcd:usb2
21: 481 IO-APIC-fasteoi ohci_hcd:usb1
22: 19744 IO-APIC-fasteoi sata_nv, nvidia
23: 13590 IO-APIC-fasteoi sata_nv, NVidia CK804
283: 1 PCI-MSI-edge marvel
NMI: 0 Non-maskable interrupts
LOC: 11801 Local timer interrupts
TRM: 0 Thermal event interrupts
THR: 0 Threshold APIC interrupts
SPU: 0 Spurious interrupts
ERR: 1
> Can you try that patch and see if the IRQ handler is really called
> repeatedly in that case?
Unfortunately I won't have time today and will be traveling till the end
of the week. I'll give it a shot next week.
Gabor
--
---------------------------------------------------------
MTA SZTAKI Computer and Automation Research Institute
Hungarian Academy of Sciences
---------------------------------------------------------
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Solid freezes with 2.6.25
2008-04-30 13:38 ` Gabor Gombas
@ 2008-04-30 14:51 ` Bernhard Walle
2008-05-07 11:43 ` Gabor Gombas
0 siblings, 1 reply; 21+ messages in thread
From: Bernhard Walle @ 2008-04-30 14:51 UTC (permalink / raw)
To: Gabor Gombas, Andrew Morton, linux-kernel, Ingo Molnar,
Thomas Gleixner
Hi,
* Gabor Gombas [2008-04-30 15:38]:
>
> On Tue, Apr 29, 2008 at 05:54:19PM +0200, Bernhard Walle wrote:
>
> > Hm ..., can you mail /proc/interrupts of the affected system? According
> > to the HPET specification
>
> The Intel box:
>
> CPU0 CPU1
> 0: 27346 29145 IO-APIC-edge timer
> 1: 842 819 IO-APIC-edge i8042
> 4: 2 2 IO-APIC-edge
> 6: 0 3 IO-APIC-edge floppy
> 8: 2 3 IO-APIC-edge rtc0
Well, looks fine. It's edge triggered. My assumption that the
T1_INT_STS must be cleared is wrong since the complete HPET code
assumes edge-triggered interrupts. To use level-triggered interrupts,
the HPET must be programmed in level triggered mode, i.e. the
Tn_INT_TYPE_CNF bit must be set. Which is never done.
Back to the original problem. Can you please watch the interrupts from
the RTC until the lockup happens with something like
------------------------- 8< -----------------------------------
function get_total_irqs()
{
sum=0
for n in $(grep rtc /proc/interrupts | \
sed -e 's/.*://g' | \
sed -e 's/[a-zA-Z].*//g' ) ;
do sum=$[$sum+$n]
done
echo $sum
}
last=$(get_total_irqs)
while true ; do
sum=$(get_total_irqs)
echo $[$sum-$last]
last=$sum
sleep 1
done
------------------------- >8 -----------------------------------
Also, please send the full .config (maybe via private mail if that's
too large for LKML, or upload it).
> > Can you try that patch and see if the IRQ handler is really called
> > repeatedly in that case?
>
> Unfortunately I won't have time today and will be traveling till the end
> of the week. I'll give it a shot next week.
Ok. Maybe don't use the patch I sent, instead use:
Bernhard
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -680,6 +680,12 @@ irqreturn_t hpet_rtc_interrupt(int irq,
struct rtc_time curr_time;
unsigned long rtc_int_flag = 0;
+ if (printk_ratelimit())
+ printk(KERN_DEBUG "hpet_rtc_interrupt %s%s%s\n",
+ (hpet_rtc_flags & RTC_UIE) ? "RTC_UIE " : "",
+ (hpet_rtc_flags & RTC_AIE) ? "RTC_AIE " : "",
+ (hpet_rtc_flags & RTC_PIE) ? "RTC_PIE " : "");
+
hpet_rtc_timer_reinit();
memset(&curr_time, 0, sizeof(struct rtc_time));
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Solid freezes with 2.6.25
2008-04-30 14:51 ` Bernhard Walle
@ 2008-05-07 11:43 ` Gabor Gombas
2008-05-07 12:45 ` Bernhard Walle
0 siblings, 1 reply; 21+ messages in thread
From: Gabor Gombas @ 2008-05-07 11:43 UTC (permalink / raw)
To: Bernhard Walle; +Cc: Andrew Morton, linux-kernel, Ingo Molnar, Thomas Gleixner
Hi,
On Wed, Apr 30, 2008 at 04:51:31PM +0200, Bernhard Walle wrote:
> Back to the original problem. Can you please watch the interrupts from
> the RTC until the lockup happens with something like
>
> ------------------------- 8< -----------------------------------
> function get_total_irqs()
[...]
I'm running it but it won't help if I'll be working on a different
virtual desktop when the hang happens...
> Also, please send the full .config (maybe via private mail if that's
> too large for LKML, or upload it).
I've already sent it but I also appended it to the end of this mail.
> --- a/arch/x86/kernel/hpet.c
> +++ b/arch/x86/kernel/hpet.c
> @@ -680,6 +680,12 @@ irqreturn_t hpet_rtc_interrupt(int irq,
> struct rtc_time curr_time;
> unsigned long rtc_int_flag = 0;
>
> + if (printk_ratelimit())
> + printk(KERN_DEBUG "hpet_rtc_interrupt %s%s%s\n",
> + (hpet_rtc_flags & RTC_UIE) ? "RTC_UIE " : "",
> + (hpet_rtc_flags & RTC_AIE) ? "RTC_AIE " : "",
> + (hpet_rtc_flags & RTC_PIE) ? "RTC_PIE " : "");
> +
> hpet_rtc_timer_reinit();
> memset(&curr_time, 0, sizeof(struct rtc_time));
Right now I'm getting a stream of "hpet_rtc_interrupt RTC_UIE" messages.
Gabor
config:
=======
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25
# Mon Apr 28 18:36:49 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CPUSETS=y
# CONFIG_GROUP_SCHED is not set
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_PROC_PID_CPUSET is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_CLASSIC_RCU=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_IOMMU_HELPER=y
CONFIG_SWIOTLB=y
CONFIG_NR_CPUS=4
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MTRR=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
# CONFIG_ACPI_BAY is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_DMAR=y
CONFIG_DMAR_GFX_WA=y
CONFIG_DMAR_FLOPPY_WA=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_NET_IPGRE_BROADCAST is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
# CONFIG_NF_NAT_SNMP_BASIC is not set
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
# CONFIG_NF_NAT_IRC is not set
CONFIG_NF_NAT_TFTP=m
# CONFIG_NF_NAT_AMANDA is not set
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
# CONFIG_IP6_NF_RAW is not set
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=m
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_RR is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
# CONFIG_NET_ACT_NAT is not set
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_SIMPLE is not set
# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
#
# Selecting 'y' for an algorithm will
#
#
# build the algorithm into mac80211.
#
CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_RC_SIMPLE is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
# CONFIG_MAC80211_DEBUG is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_VIRTIO_BLK is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_RAID5_RESHAPE=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
CONFIG_REALTEK_PHY=m
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
CONFIG_R8169_NAPI=y
CONFIG_R8169_VLAN=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ATH5K is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VIRTIO_NET is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_PNP=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=y
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_CORETEMP=m
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
CONFIG_ITCO_WDT=m
# CONFIG_ITCO_VENDOR_SUPPORT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
# CONFIG_VIDEO_V4L1 is not set
# CONFIG_VIDEO_V4L1_COMPAT is not set
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_EFI is not set
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
CONFIG_FB_INTEL=y
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
# CONFIG_SND_HDA_CODEC_ATIHDMI is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# SoC Audio support for SuperH
#
#
# ALSA SoC audio for Freescale SOCs
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I5000 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_X86_MPPARSE=y
# CONFIG_IOMMU_DEBUG is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
# CONFIG_SECURITY_SELINUX_DISABLE is not set
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
# CONFIG_KVM_AMD is not set
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m
# CONFIG_VIRTIO_PCI is not set
CONFIG_VIRTIO_BALLOON=m
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
--
---------------------------------------------------------
MTA SZTAKI Computer and Automation Research Institute
Hungarian Academy of Sciences
---------------------------------------------------------
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Solid freezes with 2.6.25
2008-05-07 11:43 ` Gabor Gombas
@ 2008-05-07 12:45 ` Bernhard Walle
2008-05-07 13:42 ` Gabor Gombas
0 siblings, 1 reply; 21+ messages in thread
From: Bernhard Walle @ 2008-05-07 12:45 UTC (permalink / raw)
To: Gabor Gombas; +Cc: Andrew Morton, linux-kernel, Ingo Molnar, Thomas Gleixner
* Gabor Gombas [2008-05-07 13:43]:
>
> I'm running it but it won't help if I'll be working on a different
> virtual desktop when the hang happens...
You can log it to a file or output it over serial console. Or make the
window sticky. ;)
Bernhard
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Solid freezes with 2.6.25
2008-05-07 12:45 ` Bernhard Walle
@ 2008-05-07 13:42 ` Gabor Gombas
2008-05-12 12:21 ` Bernhard Walle
0 siblings, 1 reply; 21+ messages in thread
From: Gabor Gombas @ 2008-05-07 13:42 UTC (permalink / raw)
To: Bernhard Walle; +Cc: Andrew Morton, linux-kernel, Ingo Molnar, Thomas Gleixner
On Wed, May 07, 2008 at 02:45:20PM +0200, Bernhard Walle wrote:
> You can log it to a file or output it over serial console. Or make the
> window sticky. ;)
Well, the machine hung and I was on a different virtual desktop. The
output of the script together with netconsole output is below. Right now
I don't have another machine that could be used for serial console.
Gabor
Script output:
--------------
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
62
64
3
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
37
65
27
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
52
65
11
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
36
64
29
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
37
70
22
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
66
62
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
60
69
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
51
70
8
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
24
(I suppose the end of the output was still in memory buffers when the
hang occured so...)
netconsole:
-----------
Initializing cgroup subsys cpuset
Linux version 2.6.25 (gombasg@boogie) (gcc version 4.2.3 (Debian 4.2.3-5)) #1 SMP Mon May 5 19:34:43 CEST 2008
Command line: BOOT_IMAGE=l2625 ro root=900 video=intelfb:1280x1024-16@60 resume=/dev/sda2 selinux=1 audit=1 nmi_watchdog=2
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cf2ac000 (usable)
BIOS-e820: 00000000cf2ac000 - 00000000cf2ef000 (ACPI NVS)
BIOS-e820: 00000000cf2ef000 - 00000000cf3c7000 (reserved)
BIOS-e820: 00000000cf3c7000 - 00000000cf3d7000 (ACPI NVS)
BIOS-e820: 00000000cf3d7000 - 00000000cf453000 (reserved)
BIOS-e820: 00000000cf453000 - 00000000cf459000 (ACPI data)
BIOS-e820: 00000000cf459000 - 00000000cf45a000 (ACPI NVS)
BIOS-e820: 00000000cf45a000 - 00000000cf45c000 (ACPI data)
BIOS-e820: 00000000cf45c000 - 00000000cf45d000 (ACPI NVS)
BIOS-e820: 00000000cf45d000 - 00000000cf45e000 (reserved)
BIOS-e820: 00000000cf45e000 - 00000000cf463000 (ACPI NVS)
BIOS-e820: 00000000cf463000 - 00000000cf472000 (reserved)
BIOS-e820: 00000000cf472000 - 00000000cf600000 (usable)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
end_pfn_map = 1245184
DMI 2.4 present.
ACPI: RSDP 000F03C0, 0024 (r2 INTEL)
ACPI: XSDT CF45AF10, 0044 (r1 INTEL DG31PR 6222004 MSFT 10013)
ACPI: FACP CF458D90, 00F4 (r4 INTEL DG31PR 6222004 MSFT 10013)
ACPI: DSDT CF453010, 4D33 (r1 INTEL DG31PR 0 INTL 20051117)
ACPI: FACS CF459F40, 0040
ACPI: APIC CF458F10, 006C (r2 INTEL DG31PR 6222004 MSFT 10013)
ACPI: HPET CF461D10, 0038 (r1 INTEL ICH7HPET 6222004 AMI. 1)
ACPI: MCFG CF461C10, 003C (r1 INTEL DG31PR 6222004 MSFT 97)
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] SMP_TRAMPOLINE
early res: 2 [200000-6bc61b] TEXT DATA BSS
early res: 3 [9fc00-a0bff] EBDA
early res: 4 [8000-dfff] PGTABLE
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1245184
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0 -> 159
0: 256 -> 848556
0: 849010 -> 849408
0: 1048576 -> 1245184
ACPI: PM-Timer IO Port: 0x408
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d0000000 (gap: cf600000:2f71c000)
SMP: Allowing 4 CPUs, 2 hotplug CPUs
PERCPU: Allocating 34112 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1024785
Kernel command line: BOOT_IMAGE=l2625 ro root=900 video=intelfb:1280x1024-16@60 resume=/dev/sda2 selinux=1 audit=1 nmi_watchdog=2
audit: enabled (after initialization)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC calibrated against PM_TIMER
time.c: Detected 2199.953 MHz processor.
Console: colour VGA+ 80x50
console [tty0] enabled
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0xae21000 - 0xee21000
Memory: 4025872k/4980736k available (2717k kernel code, 155356k reserved, 1280k data, 248k init)
SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
Calibrating delay using timer specific routine.. 4403.17 BogoMIPS (lpj=8806355)
Security Framework initialized
SELinux: Initializing.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20070126
Using local APIC timer interrupts.
Detected 12.499 MHz APIC timer.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4399.88 BogoMIPS (lpj=8799774)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz stepping 0d
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Testing NMI watchdog ... OK.
net_namespace: 1016 bytes
xor: automatically using best checksumming function: generic_sse
generic_sse: 8056.000 MB/sec
xor: using function: generic_sse (8056.000 MB/sec)
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: BIOS _OSI(Linux) query ignored
ACPI: DMI System Vendor:
ACPI: DMI Product Name:
ACPI: DMI Product Version:
ACPI: DMI Board Name: DG31PR
ACPI: DMI BIOS Vendor: Intel Corp.
ACPI: DMI BIOS Date: 02/27/2008
ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
system 00:01: iomem range 0xe0000000-0xe3ffffff has been reserved
system 00:02: ioport range 0x400-0x47f has been reserved
system 00:02: ioport range 0x1180-0x119f has been reserved
system 00:02: ioport range 0x500-0x53f has been reserved
system 00:02: iomem range 0xfec00000-0xfecfffff has been reserved
system 00:02: iomem range 0xfee00000-0xfee0ffff could not be reserved
system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:02: iomem range 0xffb00000-0xffcfffff could not be reserved
system 00:02: iomem range 0xfc800000-0xfc800fff has been reserved
system 00:02: iomem range 0xfed20000-0xfed7ffff has been reserved
system 00:02: iomem range 0xffe00000-0xffffffff could not be reserved
system 00:03: ioport range 0x290-0x29f has been reserved
system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: e000-efff
MEM window: 0xff800000-0xff8fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: d000-dfff
MEM window: 0xff700000-0xff7fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (enabled)
type=2000 audit(1210159066.436:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
async_tx: api initialized (sync-only)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button (CM) [SLPB]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button (CM) [PWRB]
ACPI: SSDT CF45EC10, 02CC (r1 AMI IST 1 MSFT 3000001)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:01 is registered as cooling_device1
Linux agpgart interface v0.103
agpgart: Detected an Intel G33 Chipset.
agpgart: Detected 7164K stolen memory.
agpgart: AGP aperture is 256M @ 0xd0000000
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
intelfb: Version 0.9.4
Driver 'sd' needs updating - please use bus_type methods
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0f0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf0f8 irq 15
ata1.00: ATAPI: ASUS DRW-1814BL, 1.13, max UDMA/66
ata1.00: configured for UDMA/66
scsi 0:0:0:0: CD-ROM ASUS DRW-1814BL 1.13 PQ: 0 ANSI: 5
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 17
ata4: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 17
ata3.00: ATA-7: Maxtor 7L250S0, BACE1G10, max UDMA/133
ata3.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
ata4.00: ATA-7: Maxtor 7L250S0, BACE1G10, max UDMA/133
ata4.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA Maxtor 7L250S0 BACE PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
scsi 3:0:0:0: Direct-Access ATA Maxtor 7L250S0 BACE PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 488281250 512-byte hardware sectors (250000 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] 488281250 512-byte hardware sectors (250000 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 < sdb5 >
sd 3:0:0:0: [sdb] Attached SCSI disk
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff984000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
usb 1-2: new high speed USB device using ehci_hcd and address 3
rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k
i2c /dev entries driver
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
raid6: int64x1 2069 MB/s
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
raid6: int64x2 2605 MB/s
raid6: int64x4 2493 MB/s
raid6: int64x8 2013 MB/s
raid6: sse2x1 3512 MB/s
raid6: sse2x2 3919 MB/s
usb 2-1: new low speed USB device using uhci_hcd and address 2
raid6: sse2x4 6641 MB/s
raid6: using algorithm sse2x4 (6641 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
EDAC MC: Ver: 2.1.0 May 5 2008
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 1
Marking TSC unstable due to TSC halts in idle
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:08: setting system clock to 2008-05-07 11:17:49 UTC (1210159069)
md: Autodetecting RAID arrays.
usb 2-1: configuration #1 chosen from 1 choice
md: invalid raid superblock magic on sda5
md: sda5 does not have a valid v0.90 superblock, not importing!
md: invalid raid superblock magic on sdb5
md: sdb5 does not have a valid v0.90 superblock, not importing!
md: Scanned 4 and added 2 devices.
md: autorun ...
md: considering sdb1 ...
md: adding sdb1 ...
md: adding sda1 ...
md: created md0
md: bind<sda1>
md: bind<sdb1>
md: running: <sdb1><sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 248k freed
SELinux: policy loaded with handle_unknown=deny
type=1403 audit(1210159070.068:2): policy loaded auid=4294967295 ses=4294967295
type=1400 audit(1210159070.312:3): avc: denied { read write } for pid=549 comm="hostname" name="console" dev=md0 ino=51241 scontext=system_u:system_r:hostname_t tcontext=user_u:object_r:device_t tclass=chr_file
type=1300 audit(1210159070.312:3): arch=40000003 syscall=11 success=yes exit=0 a0=9c3dd84 a1=9c3dd38 a2=9c3dd44 a3=9c3dd38 items=0 ppid=547 pid=549 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=tty1 ses=4294967295 comm="hostname" exe="/bin/hostname" subj=system_u:system_r:hostname_t key=(null)
type=1400 audit(1210159070.360:4): avc: denied { read write } for pid=552 comm="mountpoint" name="console" dev=md0 ino=51241 scontext=system_u:system_r:mount_t tcontext=user_u:object_r:device_t tclass=chr_file
type=1300 audit(1210159070.360:4): arch=40000003 syscall=11 success=yes exit=0 a0=80e4a5c a1=80e4a08 a2=80e4a1c a3=80e4a08 items=0 ppid=550 pid=552 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=tty1 ses=4294967295 comm="mountpoint" exe="/bin/mountpoint" subj=system_u:system_r:mount_t key=(null)
type=1400 audit(1210159070.604:5): avc: denied { read write } for pid=580 comm="restorecon" name="console" dev=md0 ino=51241 scontext=system_u:system_r:setfiles_t tcontext=user_u:object_r:device_t tclass=chr_file
type=1300 audit(1210159070.604:5): arch=40000003 syscall=11 success=yes exit=0 a0=a006a94 a1=a006ac8 a2=a006ad4 a3=a006ac8 items=0 ppid=572 pid=580 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=tty1 ses=4294967295 comm="restorecon" exe="/sbin/setfiles" subj=system_u:system_r:setfiles_t key=(null)
type=1400 audit(1210159071.652:6): avc: denied { getattr } for pid=846 comm="hdparm" path="/proc/mdstat" dev=proc ino=4026531948 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:proc_mdstat_t tclass=file
FDC 0 is a post-1991 82077
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 21 (level, low) -> IRQ 21
eth0: RealTek RTL8139 at 0xffffc20000028000, 00:c1:28:01:d5:f6, IRQ 21
input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI Exception (video-1613): AE_NOT_FOUND, Evaluating _DOD [20070126]
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:17/input/input5
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
eth1: RTL8168b/8111b at 0xffffc20000020000, 00:1c:c0:34:06:c9, XID 38500000 IRQ 380
input: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
udev: renamed network interface eth0 to rtl
udev: renamed network interface eth1 to mobo
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: Attached scsi generic sg2 type 0
ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
printk: 24 messages suppressed.
type=1400 audit(1210159072.452:10): avc: denied { read write } for pid=1266 comm="hwclock" name="console" dev=md0 ino=51241 scontext=system_u:system_r:hwclock_t tcontext=user_u:object_r:device_t tclass=chr_file
Adding 2008116k swap on /dev/sda2. Priority:-1 extents:1 across:2008116k
Adding 2008116k swap on /dev/sdb2. Priority:-2 extents:1 across:2008116k
EXT3 FS on md0, internal journal
w83627ehf: Found W83627DHG chip at 0x290
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
netconsole: local port 4444
netconsole: local IP 193.224.70.237
netconsole: interface mobo
netconsole: remote port 5555
netconsole: remote IP 193.224.70.213
netconsole: remote ethernet address 00:30:48:69:41:3a
netconsole: device mobo not up yet, forcing it
r8169: mobo: link down
r8169: mobo: link down
ADDRCONF(NETDEV_UP): mobo: link is not ready
r8169: mobo: link up
ADDRCONF(NETDEV_CHANGE): mobo: link becomes ready
console [netcon0] enabled
netconsole: network logging started
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
md: md3 stopped.
md: bind<sda5>
md: bind<sdb5>
raid1: raid set md3 active with 2 out of 2 mirrors
printk: 119 messages suppressed.
printk: 118 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
printk: 119 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
printk: 119 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
printk: 118 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
[drm:drm_update_drawable_info] *ERROR* Failed to copy cliprects from userspace
usb 1-2: USB disconnect, address 3
printk: 119 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
printk: 119 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
[drm:drm_update_drawable_info] *ERROR* Failed to copy cliprects from userspace
printk: 118 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
[drm:drm_update_drawable_info] *ERROR* Failed to copy cliprects from userspace
[drm:drm_update_drawable_info] *ERROR* Failed to copy cliprects from userspace
printk: 119 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
printk: 119 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
dropped pkt IN=mobo OUT= MAC=00:1c:c0:34:06:c9:00:19:b9:ec:f7:99:08:00 SRC=221.208.208.212 DST=193.224.70.237 LEN=486 TOS=0x00 PREC=0x00 TTL=45 ID=0 DF PROTO=UDP SPT=42549 DPT=1026 LEN=466
dropped pkt IN=mobo OUT= MAC=00:1c:c0:34:06:c9:00:19:b9:ec:f7:99:08:00 SRC=221.208.208.212 DST=193.224.70.237 LEN=486 TOS=0x00 PREC=0x00 TTL=45 ID=0 DF PROTO=UDP SPT=42550 DPT=1026 LEN=466
[drm:drm_update_drawable_info] *ERROR* Failed to copy cliprects from userspace
printk: 118 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
printk: 119 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
dropped pkt IN=mobo OUT= MAC=00:1c:c0:34:06:c9:00:19:b9:ec:f7:99:08:00 SRC=121.14.104.172 DST=193.224.70.237 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=993 PROTO=TCP SPT=80 DPT=764 WINDOW=16384 RES=0x00 ACK SYN URGP=0
[drm:drm_update_drawable_info] *ERROR* Failed to copy cliprects from userspace
[drm:drm_update_drawable_info] *ERROR* Failed to copy cliprects from userspace
printk: 119 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
[drm:drm_update_drawable_info] *ERROR* Failed to copy cliprects from userspace
[drm:drm_update_drawable_info] *ERROR* Failed to copy cliprects from userspace
[drm:drm_update_drawable_info] *ERROR* Failed to copy cliprects from userspace
usb 1-2: new high speed USB device using ehci_hcd and address 4
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
[drm:drm_update_drawable_info] *ERROR* Failed to copy cliprects from userspace
printk: 119 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
dropped pkt IN=mobo OUT= MAC=00:1c:c0:34:06:c9:00:19:b9:ec:f7:99:08:00 SRC=74.53.58.169 DST=193.224.70.237 LEN=40 TOS=0x00 PREC=0x00 TTL=238 ID=19289 PROTO=TCP SPT=1557 DPT=1433 WINDOW=4096 RES=0x00 SYN URGP=0
printk: 118 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
dropped pkt IN=mobo OUT= MAC=00:1c:c0:34:06:c9:00:19:b9:ec:f7:99:08:00 SRC=62.13.169.96 DST=193.224.70.237 LEN=40 TOS=0x00 PREC=0x00 TTL=48 ID=19882 PROTO=TCP SPT=53 DPT=1141 WINDOW=0 RES=0x00 ACK SYN URGP=0
printk: 119 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
printk: 119 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
printk: 119 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
printk: 118 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
printk: 119 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
printk: 119 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
printk: 119 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
printk: 118 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
printk: 119 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
printk: 119 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
printk: 118 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
printk: 119 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
printk: 119 messages suppressed.
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
hpet_rtc_interrupt RTC_UIE
NMI Watchdog detected LOCKUP on CPU 0
CPU 0
Modules linked in: i915 drm rfcomm l2cap bluetooth xfrm_user xfrm4_tunnel tunnel4 ipcomp esp4 aead ah4 nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs ipt_ULOG microcode ipt_REJECT nf_conntrack_ipv4 xt_state nf_conntrack xt_tcpudp ipt_LOG xt_limit iptable_filter ip_tables x_tables deflate zlib_deflate zlib_inflate ctr twofish twofish_common camellia serpent blowfish des_generic cbc aes_x86_64 aes_generic xcbc sha256_generic sha1_generic md5 crypto_null af_key fuse dm_crypt crypto_blkcipher dm_snapshot dm_mirror dm_mod netconsole configfs coretemp w83627ehf hwmon_vid snd_hda_intel snd_pcm snd_timer sg sr_mod snd r8169 video 8250_pnp 8250 serial_core i2c_i801 8139too snd_page_alloc usbhid iTCO_wdt floppy cdrom
Pid: 23111, comm: cc1 Not tainted 2.6.25 #1
RIP: 0010:[<ffffffff8021aaa0>] [<ffffffff8021aaa0>] hpet_rtc_interrupt+0x166/0x349
RSP: 0018:ffffffff8064cec8 EFLAGS: 00000097
RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
RDX: 0000000000007d7d RSI: 0000000000000002 RDI: ffffffff80655ef8
RBP: 00000001001c203d R08: ffffffffff5fc128 R09: 0000000000000000
R10: 0000000000000046 R11: ffffffff802fe216 R12: 00000000000000a6
R13: ffff81012fe1d400 R14: 0000000000000004 R15: ffff8100b5b5be38
FS: 0000000000000000(0000) GS:ffffffff805e8000(0063) knlGS:00000000555706b0
CS: 0010 DS: 002b ES: 002b CR0: 000000008005003b
CR2: 0000000055935000 CR3: 00000000583ca000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process cc1 (pid: 23111, threadinfo ffff8100b5b5a000, task ffff8100bd923260)
Stack: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
ffffffff00000000 0000000000000001 ffffffff806432c0 ffff81012fcc2d80
0000000000000000 0000000000000000 0000000000000008 ffffffff8025d720
Call Trace:
<IRQ> [<ffffffff8025d720>] ? handle_IRQ_event+0x25/0x53
[<ffffffff8025ec8a>] ? handle_edge_irq+0xdd/0x11c
[<ffffffff8020c0cc>] ? call_softirq+0x1c/0x28
[<ffffffff8020e26a>] ? do_IRQ+0xf1/0x15f
[<ffffffff8020b451>] ? ret_from_intr+0x0/0xa
<EOI> [<ffffffff802fe216>] ? selinux_file_permission+0x0/0x119
[<ffffffff802f9be8>] ? avc_has_perm_noaudit+0x2/0x359
[<ffffffff802fa9e5>] ? avc_has_perm+0x2f/0x5e
[<ffffffff8028b212>] ? pipe_write+0x423/0x435
[<ffffffff8026731b>] ? get_page_from_freelist+0x392/0x427
[<ffffffff802fb6ca>] ? inode_has_perm+0x65/0x72
[<ffffffff80284f14>] ? do_sync_write+0xd1/0x118
[<ffffffff802829a3>] ? __mem_cgroup_add_list+0x9/0x5c
[<ffffffff802fb771>] ? file_has_perm+0x9a/0xa9
[<ffffffff802fe310>] ? selinux_file_permission+0xfa/0x119
[<ffffffff802850f2>] ? rw_verify_area+0x7f/0x9f
[<ffffffff8028568b>] ? vfs_write+0x86/0x143
[<ffffffff80285c26>] ? sys_write+0x45/0x6e
[<ffffffff8021e272>] ? sysenter_do_call+0x1b/0x66
Code: a0 28 00 bf 0a 00 00 00 48 89 c3 e8 27 6b ff ff 48 89 de 41 88 c4 48 c7 c7 f8 5e 65 80 e8 28 a1 28 00 45 84 e4 78 04 eb 12 f3 90 <48> 8b 05 d9 1d 3e 00 48 29 e8 48 83 f8 04 76 ee 48 c7 c7 f8 5e
---[ end trace 872500f60116b571 ]---
Kernel panic - not syncing: Aiee, killing interrupt handler!
--
---------------------------------------------------------
MTA SZTAKI Computer and Automation Research Institute
Hungarian Academy of Sciences
---------------------------------------------------------
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Solid freezes with 2.6.25
2008-05-07 13:42 ` Gabor Gombas
@ 2008-05-12 12:21 ` Bernhard Walle
2008-05-13 14:39 ` Gabor Gombas
0 siblings, 1 reply; 21+ messages in thread
From: Bernhard Walle @ 2008-05-12 12:21 UTC (permalink / raw)
To: Gabor Gombas; +Cc: Andrew Morton, linux-kernel, Ingo Molnar, Thomas Gleixner
Hi,
* Gabor Gombas <gombasg@sztaki.hu> [2008-05-07 15:42]:
>
> On Wed, May 07, 2008 at 02:45:20PM +0200, Bernhard Walle wrote:
>
> > You can log it to a file or output it over serial console. Or make the
> > window sticky. ;)
>
> Well, the machine hung and I was on a different virtual desktop. The
> output of the script together with netconsole output is below. Right now
> I don't have another machine that could be used for serial console.
Well, can you try if that really not happens without
CONFIG_HPET_EMULATE_RTC? The question is if that 64 interrupts per second really
cause a machine hang ...
However, the other question is why you get that RTC interrupts at all.
I compared the old RTC implementation (drivers/char/rtc.c) with the new
RTC interface (rtc-cmos.c) and the old implementation disables
interrupts automatically when the device is closed in userspace while
the new doesn't. I think the old one makes more sense, and so I think
the following patch should be applied. Gabor, can you also test that
patch ... it should fix your problem.
For debugging purposes it makes sense to apply the debug patch also (the
printk() in the interrupt handler). It should not conflict.
Bernhard
From: Bernhard Walle <bwalle@suse.de>
Subject: [PATCH] Disable RTC interrupts when closing the device
This patch disables RTC for rtc_cmos interrupts when the /dev/rtcX is closed.
Previously, the userspace program explicitely had to call ioctl(RTC_..._OFF).
This is the same behaviour as the old drivers/char/rtc.c driver. Especially
when using the HPET emulation which uses a timer frequency of 64 Hz by default
it makes sense to disable this interrupts.
Signed-off-by: Bernhard Walle <bwalle@suse.de>
---
drivers/rtc/rtc-cmos.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -302,6 +302,23 @@ static int cmos_irq_set_state(struct dev
return 0;
}
+static void
+cmos_rtc_release(struct device *dev)
+{
+ unsigned char tmp;
+
+ spin_lock_irq(&rtc_lock);
+ if (!hpet_mask_rtc_irq_bit(RTC_PIE | RTC_AIE | RTC_UIE)) {
+ tmp = CMOS_READ(RTC_CONTROL);
+ tmp &= ~RTC_PIE;
+ tmp &= ~RTC_AIE;
+ tmp &= ~RTC_UIE;
+ CMOS_WRITE(tmp, RTC_CONTROL);
+ CMOS_READ(RTC_INTR_FLAGS);
+ }
+ spin_unlock_irq(&rtc_lock);
+}
+
#if defined(CONFIG_RTC_INTF_DEV) || defined(CONFIG_RTC_INTF_DEV_MODULE)
static int
@@ -409,6 +426,7 @@ static int cmos_procfs(struct device *de
static const struct rtc_class_ops cmos_rtc_ops = {
.ioctl = cmos_rtc_ioctl,
+ .release = cmos_rtc_release,
.read_time = cmos_read_time,
.set_time = cmos_set_time,
.read_alarm = cmos_read_alarm,
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Solid freezes with 2.6.25
2008-05-12 12:21 ` Bernhard Walle
@ 2008-05-13 14:39 ` Gabor Gombas
2008-06-15 17:11 ` Gabor Gombas
0 siblings, 1 reply; 21+ messages in thread
From: Gabor Gombas @ 2008-05-13 14:39 UTC (permalink / raw)
To: Bernhard Walle; +Cc: Andrew Morton, linux-kernel, Ingo Molnar, Thomas Gleixner
On Mon, May 12, 2008 at 02:21:46PM +0200, Bernhard Walle wrote:
> Well, can you try if that really not happens without
> CONFIG_HPET_EMULATE_RTC? The question is if that 64 interrupts per second really
> cause a machine hang ...
I'll try when I have a little time...
> However, the other question is why you get that RTC interrupts at all.
> I compared the old RTC implementation (drivers/char/rtc.c) with the new
> RTC interface (rtc-cmos.c) and the old implementation disables
> interrupts automatically when the device is closed in userspace while
> the new doesn't. I think the old one makes more sense, and so I think
> the following patch should be applied. Gabor, can you also test that
> patch ... it should fix your problem.
I'm running chrony which keeps the device open all the time:
chronyd 3433 root 6u CHR 254,0 0t0 1971 /dev/rtc0
So I don't think the patch would make any difference, but I can
certainly try it.
Gabor
--
---------------------------------------------------------
MTA SZTAKI Computer and Automation Research Institute
Hungarian Academy of Sciences
---------------------------------------------------------
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Solid freezes with 2.6.25
2008-05-13 14:39 ` Gabor Gombas
@ 2008-06-15 17:11 ` Gabor Gombas
2008-07-25 8:52 ` Gabor Gombas
0 siblings, 1 reply; 21+ messages in thread
From: Gabor Gombas @ 2008-06-15 17:11 UTC (permalink / raw)
To: Bernhard Walle; +Cc: Andrew Morton, linux-kernel, Ingo Molnar, Thomas Gleixner
On Tue, May 13, 2008 at 04:39:29PM +0200, Gabor Gombas wrote:
> On Mon, May 12, 2008 at 02:21:46PM +0200, Bernhard Walle wrote:
>
> > Well, can you try if that really not happens without
> > CONFIG_HPET_EMULATE_RTC? The question is if that 64 interrupts per second really
> > cause a machine hang ...
>
> I'll try when I have a little time...
Ok, it took much more time than I'd have liked, but now I'm having:
$ uname -a
Linux boogie 2.6.25 #3 SMP Thu Jun 12 13:32:35 CEST 2008 x86_64 GNU/Linux
$ grep EMULATE_RTC /boot/config-2.6.25
# CONFIG_HPET_EMULATE_RTC is not set
$ uptime
19:07:17 up 3 days, 4:07, 12 users, load average: 0.14, 0.31, 0.20
So I'd say it works.
Gabor
--
---------------------------------------------------------
MTA SZTAKI Computer and Automation Research Institute
Hungarian Academy of Sciences
---------------------------------------------------------
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Solid freezes with 2.6.25
2008-06-15 17:11 ` Gabor Gombas
@ 2008-07-25 8:52 ` Gabor Gombas
2008-07-25 9:04 ` Bernhard Walle
0 siblings, 1 reply; 21+ messages in thread
From: Gabor Gombas @ 2008-07-25 8:52 UTC (permalink / raw)
To: Bernhard Walle; +Cc: Andrew Morton, linux-kernel, Ingo Molnar, Thomas Gleixner
On Sun, Jun 15, 2008 at 07:11:41PM +0200, Gabor Gombas wrote:
> On Tue, May 13, 2008 at 04:39:29PM +0200, Gabor Gombas wrote:
> > On Mon, May 12, 2008 at 02:21:46PM +0200, Bernhard Walle wrote:
> >
> > > Well, can you try if that really not happens without
> > > CONFIG_HPET_EMULATE_RTC? The question is if that 64 interrupts per second really
> > > cause a machine hang ...
> >
> > I'll try when I have a little time...
>
> Ok, it took much more time than I'd have liked, but now I'm having:
>
> $ uname -a
> Linux boogie 2.6.25 #3 SMP Thu Jun 12 13:32:35 CEST 2008 x86_64 GNU/Linux
> $ grep EMULATE_RTC /boot/config-2.6.25
> # CONFIG_HPET_EMULATE_RTC is not set
> $ uptime
> 19:07:17 up 3 days, 4:07, 12 users, load average: 0.14, 0.31, 0.20
>
> So I'd say it works.
FYI, the bug is still present in 2.6.26. I also got the same hang on a
Dell PowerEdge 850 using a Debian-provided kernel (based on 2.6.25.6);
that is the 3rd distinct HW configuration that hangs.
Gabor
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.26 (gombasg@boogie) (gcc version 4.3.1 (Debian 4.3.1-7) ) #16 SMP Thu Jul 24 14:30:09 CEST 2008
[ 0.000000] Command line: BOOT_IMAGE=l2626 ro root=900 video=intelfb:1280x1024-16@60 resume=/dev/sda2 selinux=1 audit=1 nmi_watchdog=2
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf2ac000 (usable)
[ 0.000000] BIOS-e820: 00000000cf2ac000 - 00000000cf2ef000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cf2ef000 - 00000000cf3c7000 (reserved)
[ 0.000000] BIOS-e820: 00000000cf3c7000 - 00000000cf3d7000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cf3d7000 - 00000000cf453000 (reserved)
[ 0.000000] BIOS-e820: 00000000cf453000 - 00000000cf459000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cf459000 - 00000000cf45a000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cf45a000 - 00000000cf45c000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cf45c000 - 00000000cf45d000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cf45d000 - 00000000cf45e000 (reserved)
[ 0.000000] BIOS-e820: 00000000cf45e000 - 00000000cf463000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cf463000 - 00000000cf472000 (reserved)
[ 0.000000] BIOS-e820: 00000000cf472000 - 00000000cf600000 (usable)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] max_pfn_mapped = 1245184
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] init_memory_mapping
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000F03C0, 0024 (r2 INTEL)
[ 0.000000] ACPI: XSDT CF45AF10, 0044 (r1 INTEL DG31PR 6222004 MSFT 10013)
[ 0.000000] ACPI: FACP CF458D90, 00F4 (r4 INTEL DG31PR 6222004 MSFT 10013)
[ 0.000000] ACPI: DSDT CF453010, 4D33 (r1 INTEL DG31PR 0 INTL 20051117)
[ 0.000000] ACPI: FACS CF459F40, 0040
[ 0.000000] ACPI: APIC CF458F10, 006C (r2 INTEL DG31PR 6222004 MSFT 10013)
[ 0.000000] ACPI: HPET CF461D10, 0038 (r1 INTEL ICH7HPET 6222004 AMI. 1)
[ 0.000000] ACPI: MCFG CF461C10, 003C (r1 INTEL DG31PR 6222004 MSFT 97)
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
[ 0.000000] early res: 2 [200000-7582fb] TEXT DATA BSS
[ 0.000000] early res: 3 [9fc00-fffff] BIOS reserved
[ 0.000000] early res: 4 [8000-dfff] PGTABLE
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1245184
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 848556
[ 0.000000] 0: 849010 -> 849408
[ 0.000000] 0: 1048576 -> 1245184
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: cf600000:2f71c000)
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PERCPU: Allocating 35632 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1026966
[ 0.000000] Kernel command line: BOOT_IMAGE=l2626 ro root=900 video=intelfb:1280x1024-16@60 resume=/dev/sda2 selinux=1 audit=1 nmi_watchdog=2
[ 0.000000] audit: enabled (after initialization)
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000000] time.c: Detected 2199.953 MHz processor.
[ 0.004000] Console: colour VGA+ 80x28
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004000] Checking aperture...
[ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.004000] Placing software IO TLB between 0x163f000 - 0x563f000
[ 0.004000] Memory: 4033484k/4980736k available (2898k kernel code, 147648k reserved, 1630k data, 304k init)
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.083913] Calibrating delay using timer specific routine.. 4403.46 BogoMIPS (lpj=8806922)
[ 0.084005] Security Framework initialized
[ 0.084005] SELinux: Initializing.
[ 0.084005] selinux_register_security: Registering secondary module capability
[ 0.084005] Capability LSM initialized as secondary
[ 0.084005] Mount-cache hash table entries: 256
[ 0.084005] Initializing cgroup subsys ns
[ 0.084005] Initializing cgroup subsys cpuacct
[ 0.084005] Initializing cgroup subsys devices
[ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.084005] CPU: L2 cache: 1024K
[ 0.084005] CPU: Physical Processor ID: 0
[ 0.084005] CPU: Processor Core ID: 0
[ 0.084005] CPU0: Thermal monitoring enabled (TM2)
[ 0.084005] using mwait in idle threads.
[ 0.084005] ACPI: Core revision 20080321
[ 0.131240] CPU0: Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz stepping 0d
[ 0.131386] Using local APIC timer interrupts.
[ 0.136008] Detected 12.499 MHz APIC timer.
[ 0.136008] Booting processor 1/1 ip 6000
[ 0.144009] Initializing CPU#1
[ 0.144009] Calibrating delay using timer specific routine.. 4399.89 BogoMIPS (lpj=8799797)
[ 0.144009] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.144009] CPU: L2 cache: 1024K
[ 0.144009] CPU: Physical Processor ID: 0
[ 0.144009] CPU: Processor Core ID: 1
[ 0.144009] CPU1: Thermal monitoring enabled (TM2)
[ 0.144009] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.224014] CPU1: Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz stepping 0d
[ 0.224014] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.228014] Brought up 2 CPUs
[ 0.228014] Total of 2 processors activated (8803.35 BogoMIPS).
[ 0.228014] Testing NMI watchdog ... OK.
[ 0.308019] net_namespace: 1224 bytes
[ 0.308019] Booting paravirtualized kernel on bare hardware
[ 0.308019] xor: automatically using best checksumming function: generic_sse
[ 0.324905] generic_sse: 8047.000 MB/sec
[ 0.325001] xor: using function: generic_sse (8047.000 MB/sec)
[ 0.325130] NET: Registered protocol family 16
[ 0.328121] No dock devices found.
[ 0.328121] ACPI: bus type pci registered
[ 0.328121] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 64
[ 0.328121] PCI: Not using MMCONFIG.
[ 0.328121] PCI: Using configuration type 1 for base access
[ 0.334329] ACPI: Interpreter enabled
[ 0.334426] ACPI: (supports S0 S5)
[ 0.334564] ACPI: Using IOAPIC for interrupt routing
[ 0.334712] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 64
[ 0.336122] PCI: BIOS Bug: MCFG area at e0000000 is not reserved in ACPI motherboard resources
[ 0.336298] PCI: Not using MMCONFIG.
[ 0.340122] ACPI: BIOS _OSI(Linux) query ignored
[ 0.340122] ACPI: DMI System Vendor:
[ 0.340122] ACPI: DMI Product Name:
[ 0.340122] ACPI: DMI Product Version:
[ 0.340122] ACPI: DMI Board Name: DG31PR
[ 0.340122] ACPI: DMI BIOS Vendor: Intel Corp.
[ 0.340122] ACPI: DMI BIOS Date: 02/27/2008
[ 0.340122] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
[ 0.340122] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
[ 0.344122] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.344689] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.344861] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.345414] PCI: Transparent bridge - 0000:00:1e.0
[ 0.352123] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.352123] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.352123] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.352123] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.352123] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.352123] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.352123] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.352653] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.356123] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.356123] pnp: PnP ACPI init
[ 0.356123] ACPI: bus type pnp registered
[ 0.360123] pnp: PnP ACPI: found 13 devices
[ 0.360123] ACPI: ACPI bus type pnp unregistered
[ 0.360123] SCSI subsystem initialized
[ 0.360123] usbcore: registered new interface driver usbfs
[ 0.360123] usbcore: registered new interface driver hub
[ 0.360123] usbcore: registered new device driver usb
[ 0.360123] PCI: Using ACPI for IRQ routing
[ 0.380087] NetLabel: Initializing
[ 0.380125] NetLabel: domain hash size = 128
[ 0.380125] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.380125] NetLabel: unlabeled traffic allowed by default
[ 0.380125] PCI-GART: No AMD northbridge found.
[ 0.380125] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.380125] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.380125] ACPI: RTC can wake from S4
[ 0.394408] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.394526] system 00:01: iomem range 0xe0000000-0xe3ffffff has been reserved
[ 0.394643] system 00:02: ioport range 0x400-0x47f has been reserved
[ 0.394746] system 00:02: ioport range 0x1180-0x119f has been reserved
[ 0.394850] system 00:02: ioport range 0x500-0x53f has been reserved
[ 0.394954] system 00:02: iomem range 0xfec00000-0xfecfffff has been reserved
[ 0.395058] system 00:02: iomem range 0xfee00000-0xfee0ffff has been reserved
[ 0.395163] system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 0.395334] system 00:02: iomem range 0xffb00000-0xffcfffff could not be reserved
[ 0.395505] system 00:02: iomem range 0xfc800000-0xfc800fff has been reserved
[ 0.395610] system 00:02: iomem range 0xfed20000-0xfed7ffff has been reserved
[ 0.395715] system 00:02: iomem range 0xffe00000-0xffffffff could not be reserved
[ 0.395888] system 00:03: ioport range 0x290-0x29f has been reserved
[ 0.395999] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 0.396336] PCI: Bridge: 0000:00:01.0
[ 0.396336] IO window: disabled.
[ 0.396336] MEM window: disabled.
[ 0.396336] PREFETCH window: disabled.
[ 0.396336] PCI: Bridge: 0000:00:1c.0
[ 0.396336] IO window: disabled.
[ 0.396336] MEM window: disabled.
[ 0.396336] PREFETCH window: disabled.
[ 0.396336] PCI: Bridge: 0000:00:1c.1
[ 0.396336] IO window: e000-efff
[ 0.396336] MEM window: 0xff800000-0xff8fffff
[ 0.396336] PREFETCH window: disabled.
[ 0.396336] PCI: Bridge: 0000:00:1e.0
[ 0.396336] IO window: d000-dfff
[ 0.396336] MEM window: 0xff700000-0xff7fffff
[ 0.396336] PREFETCH window: disabled.
[ 0.396336] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.396336] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.398408] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 0.398619] NET: Registered protocol family 2
[ 0.438664] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.439328] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.442608] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.443216] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.443322] TCP reno registered
[ 0.451871] NET: Registered protocol family 1
[ 0.454650] audit: initializing netlink socket (enabled)
[ 0.454650] type=2000 audit(1216911801.448:1): initialized
[ 0.458668] VFS: Disk quotas dquot_6.5.1
[ 0.458668] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.458678] msgmni has been set to 7879
[ 0.458678] async_tx: api initialized (sync-only)
[ 0.458678] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.458678] io scheduler noop registered
[ 0.458678] io scheduler anticipatory registered
[ 0.458678] io scheduler deadline registered
[ 0.458678] io scheduler cfq registered (default)
[ 0.458678] assign_interrupt_mode Found MSI capability
[ 0.458678] assign_interrupt_mode Found MSI capability
[ 0.458678] assign_interrupt_mode Found MSI capability
[ 0.458726] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.458898] ACPI: Power Button (FF) [PWRF]
[ 0.459085] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.459263] ACPI: Sleep Button (CM) [SLPB]
[ 0.459415] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 0.459592] ACPI: Power Button (CM) [PWRB]
[ 0.459988] ACPI: SSDT CF45EC10, 02CC (r1 AMI IST 1 MSFT 3000001)
[ 0.466667] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.466667] ACPI: ACPI0007:00 is registered as cooling_device0
[ 0.466667] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.466667] ACPI: ACPI0007:01 is registered as cooling_device1
[ 0.524641] Linux agpgart interface v0.103
[ 0.524755] agpgart: Detected an Intel G33 Chipset.
[ 0.525203] agpgart: Detected 7164K stolen memory.
[ 0.538224] agpgart: AGP aperture is 256M @ 0xd0000000
[ 0.538284] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
[ 0.538284] Hangcheck: Using get_cycles().
[ 0.538284] Driver 'sd' needs updating - please use bus_type methods
[ 0.538284] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.538284] scsi0 : ata_piix
[ 0.538284] scsi1 : ata_piix
[ 0.539805] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0f0 irq 14
[ 0.539805] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf0f8 irq 15
[ 0.698054] ata1.00: ATAPI: ASUS DRW-1814BL, 1.13, max UDMA/66
[ 0.713795] ata1.00: configured for UDMA/66
[ 0.715215] scsi 0:0:0:0: CD-ROM ASUS DRW-1814BL 1.13 PQ: 0 ANSI: 5
[ 0.718780] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 0.718780] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.718780] scsi2 : ata_piix
[ 0.718780] scsi3 : ata_piix
[ 0.718780] ata3: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 17
[ 0.718780] ata4: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 17
[ 0.879762] ata3.00: ATA-7: Maxtor 7L250S0, BACE1G10, max UDMA/133
[ 0.879876] ata3.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.897436] ata3.00: configured for UDMA/133
[ 1.058295] ata4.00: ATA-7: Maxtor 7L250S0, BACE1G10, max UDMA/133
[ 1.058408] ata4.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.075859] ata4.00: configured for UDMA/133
[ 1.075859] scsi 2:0:0:0: Direct-Access ATA Maxtor 7L250S0 BACE PQ: 0 ANSI: 5
[ 1.075859] sd 2:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB)
[ 1.075859] sd 2:0:0:0: [sda] Write Protect is off
[ 1.075859] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.075859] sd 2:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB)
[ 1.075859] sd 2:0:0:0: [sda] Write Protect is off
[ 1.075859] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.075859] sda: sda1 sda2 sda3 < sda5 >
[ 1.093168] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.093168] scsi 3:0:0:0: Direct-Access ATA Maxtor 7L250S0 BACE PQ: 0 ANSI: 5
[ 1.093168] sd 3:0:0:0: [sdb] 488281250 512-byte hardware sectors (250000 MB)
[ 1.093168] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.093168] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.097312] sd 3:0:0:0: [sdb] 488281250 512-byte hardware sectors (250000 MB)
[ 1.097426] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.097544] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.099009] sdb: sdb1 sdb2 sdb3 < sdb5 >
[ 1.123544] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.123544] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 1.123544] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.123544] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.134044] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.134155] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff984000
[ 1.147551] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.148807] usb usb1: configuration #1 chosen from 1 choice
[ 1.149945] hub 1-0:1.0: USB hub found
[ 1.150045] hub 1-0:1.0: 8 ports detected
[ 1.255045] USB Universal Host Controller Interface driver v3.0
[ 1.255045] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 1.255055] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.255594] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.255594] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
[ 1.255594] usb usb2: configuration #1 chosen from 1 choice
[ 1.255594] hub 2-0:1.0: USB hub found
[ 1.255594] hub 2-0:1.0: 2 ports detected
[ 1.359978] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 1.359978] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.360472] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.360472] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
[ 1.360472] usb usb3: configuration #1 chosen from 1 choice
[ 1.360472] hub 3-0:1.0: USB hub found
[ 1.360472] hub 3-0:1.0: 2 ports detected
[ 1.466122] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 1.466122] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.466616] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.466616] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
[ 1.466616] usb usb4: configuration #1 chosen from 1 choice
[ 1.466616] hub 4-0:1.0: USB hub found
[ 1.466616] hub 4-0:1.0: 2 ports detected
[ 1.570122] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 1.570122] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.570616] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.570616] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
[ 1.570616] usb usb5: configuration #1 chosen from 1 choice
[ 1.570616] hub 5-0:1.0: USB hub found
[ 1.570616] hub 5-0:1.0: 2 ports detected
[ 1.674870] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.674870] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.675417] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.675417] mice: PS/2 mouse device common for all mice
[ 1.682625] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 1.735381] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 1.735381] rtc0: alarms up to one year, y3k
[ 1.735381] i2c /dev entries driver
[ 1.735381] md: raid0 personality registered for level 0
[ 1.735381] md: raid1 personality registered for level 1
[ 1.735381] md: raid10 personality registered for level 10
[ 1.770607] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.806453] raid6: int64x1 2156 MB/s
[ 1.822579] usb 1-2: configuration #1 chosen from 1 choice
[ 1.822686] hub 1-2:1.0: USB hub found
[ 1.822686] hub 1-2:1.0: 4 ports detected
[ 1.874528] raid6: int64x2 2757 MB/s
[ 1.942471] raid6: int64x4 2041 MB/s
[ 2.010382] raid6: int64x8 1833 MB/s
[ 2.078319] raid6: sse2x1 3477 MB/s
[ 2.146238] raid6: sse2x2 3853 MB/s
[ 2.166584] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 2.214171] raid6: sse2x4 6662 MB/s
[ 2.214267] raid6: using algorithm sse2x4 (6662 MB/s)
[ 2.214367] md: raid6 personality registered for level 6
[ 2.214466] md: raid5 personality registered for level 5
[ 2.214565] md: raid4 personality registered for level 4
[ 2.214630] EDAC MC: Ver: 2.1.0 Jul 24 2008
[ 2.214630] cpuidle: using governor ladder
[ 2.214630] cpuidle: using governor menu
[ 2.230581] Marking TSC unstable due to TSC halts in idle
[ 2.318609] usb 2-1: configuration #1 chosen from 1 choice
[ 2.493463] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4
[ 2.520324] input: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-1
[ 2.520328] usbcore: registered new interface driver usbhid
[ 2.520328] usbhid: v2.6:USB HID core driver
[ 2.520331] TCP cubic registered
[ 2.520340] NET: Registered protocol family 10
[ 2.520340] lo: Disabled Privacy Extensions
[ 2.520340] NET: Registered protocol family 17
[ 2.520365] registered taskstats version 1
[ 2.520365] rtc_cmos 00:08: setting system clock to 2008-07-24 15:03:24 UTC (1216911804)
[ 2.520374] md: Autodetecting RAID arrays.
[ 2.562137] md: invalid raid superblock magic on sda5
[ 2.562137] md: sda5 does not have a valid v0.90 superblock, not importing!
[ 2.591126] md: invalid raid superblock magic on sdb5
[ 2.591126] md: sdb5 does not have a valid v0.90 superblock, not importing!
[ 2.591126] md: Scanned 4 and added 2 devices.
[ 2.591126] md: autorun ...
[ 2.591126] md: considering sdb1 ...
[ 2.591126] md: adding sdb1 ...
[ 2.591126] md: adding sda1 ...
[ 2.591126] md: created md0
[ 2.591126] md: bind<sda1>
[ 2.591126] md: bind<sdb1>
[ 2.591938] md: running: <sdb1><sda1>
[ 2.595977] raid1: raid set md0 active with 2 out of 2 mirrors
[ 2.595977] md: ... autorun DONE.
[ 2.615882] kjournald starting. Commit interval 5 seconds
[ 2.615882] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.615882] VFS: Mounted root (ext3 filesystem) readonly.
[ 2.615882] Freeing unused kernel memory: 304k freed
[ 3.097367] SELinux: policy loaded with handle_unknown=deny
[ 3.097479] type=1403 audit(1216911805.025:2): policy loaded auid=4294967295 ses=4294967295
[ 3.388376] type=1400 audit(1216911805.306:3): avc: denied { read write } for pid=554 comm="hostname" name="console" dev=md0 ino=51240 scontext=system_u:system_r:hostname_t:s0 tcontext=user_u:object_r:device_t:s0 tclass=chr_file
[ 3.388490] type=1300 audit(1216911805.306:3): arch=40000003 syscall=11 success=yes exit=0 a0=980b374 a1=980b328 a2=980b334 a3=2 items=0 ppid=552 pid=554 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=tty1 ses=4294967295 comm="hostname" exe="/bin/hostname" subj=system_u:system_r:hostname_t:s0 key=(null)
[ 3.427939] type=1400 audit(1216911805.338:4): avc: denied { read write } for pid=557 comm="mountpoint" name="console" dev=md0 ino=51240 scontext=system_u:system_r:mount_t:s0 tcontext=user_u:object_r:device_t:s0 tclass=chr_file
[ 3.427939] type=1300 audit(1216911805.338:4): arch=40000003 syscall=11 success=yes exit=0 a0=9a9f64c a1=9a9f5f8 a2=9a9f60c a3=2 items=0 ppid=555 pid=557 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=tty1 ses=4294967295 comm="mountpoint" exe="/bin/mountpoint" subj=system_u:system_r:mount_t:s0 key=(null)
[ 3.681882] type=1400 audit(1216911805.593:5): avc: denied { read write } for pid=584 comm="restorecon" name="console" dev=md0 ino=51240 scontext=system_u:system_r:setfiles_t:s0 tcontext=user_u:object_r:device_t:s0 tclass=chr_file
[ 3.682246] type=1300 audit(1216911805.593:5): arch=40000003 syscall=11 success=yes exit=0 a0=95dea14 a1=95dea48 a2=95dea54 a3=95dbf5d items=0 ppid=577 pid=584 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=tty1 ses=4294967295 comm="restorecon" exe="/sbin/setfiles" subj=system_u:system_r:setfiles_t:s0 key=(null)
[ 4.846325] type=1400 audit(1216911806.753:6): avc: denied { getattr } for pid=862 comm="hdparm" path="/proc/mdstat" dev=proc ino=4026531950 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:proc_mdstat_t:s0 tclass=file
[ 4.846725] type=1300 audit(1216911806.753:6): arch=40000003 syscall=195 success=yes exit=0 a0=951a4dc a1=fffb4f2c a2=4546cff4 a3=805b285 items=0 ppid=789 pid=862 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="hdparm" exe="/bin/dash" subj=system_u:system_r:udev_t:s0-s0:c0.c1023 key=(null)
[ 5.083531] FDC 0 is a post-1991 82077
[ 5.097315] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
[ 5.122995] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 5.123020] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 5.125589] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 5.146818] ACPI Exception (video-1600): AE_NOT_FOUND, Evaluating _DOD [20080321]
[ 5.146875] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:17/input/input5
[ 5.157692] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 5.157692] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[ 5.157932] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.169350] 8139too Fast Ethernet driver 0.9.28
[ 5.169519] ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 5.169688] eth0: RealTek RTL8139 at 0xffffc20000022000, 00:c1:28:01:d5:f6, IRQ 21
[ 5.182384] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 5.182384] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 5.182932] eth1: RTL8168b/8111b at 0xffffc20000024000, 00:1c:c0:34:06:c9, XID 38500000 IRQ 380
[ 5.199443] ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
[ 5.201572] Driver 'sr' needs updating - please use bus_type methods
[ 5.206543] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.206543] Uniform CD-ROM driver Revision: 3.20
[ 5.261656] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 5.282010] udev: renamed network interface eth0 to rtl
[ 5.284596] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 5.284721] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 5.284745] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 5.290499] udev: renamed network interface eth1 to mobo
[ 5.301018] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 5.635938] __ratelimit: 30 messages suppressed
[ 5.635938] type=1400 audit(1216911807.526:12): avc: denied { read write } for pid=1266 comm="hwclock" name="console" dev=md0 ino=51240 scontext=system_u:system_r:hwclock_t:s0 tcontext=user_u:object_r:device_t:s0 tclass=chr_file
[ 5.709887] Adding 2008116k swap on /dev/sda2. Priority:-1 extents:1 across:2008116k
[ 5.737559] Adding 2008116k swap on /dev/sdb2. Priority:-2 extents:1 across:2008116k
[ 5.942999] EXT3 FS on md0, internal journal
[ 6.391974] w83627ehf: Found W83627DHG chip at 0x290
[ 6.403821] coretemp coretemp.0: Using relative temperature scale!
[ 6.403821] coretemp coretemp.1: Using relative temperature scale!
[ 6.431181] netconsole: local port 4444
[ 6.431281] netconsole: local IP XXX.XXX.XXX.XXX
[ 6.431378] netconsole: interface mobo
[ 6.431473] netconsole: remote port 5555
[ 6.431569] netconsole: remote IP XXX.XXX.XXX.XXX
[ 6.431666] netconsole: remote ethernet address XX:XX:XX:XX:XX:XX
[ 6.431770] netconsole: device mobo not up yet, forcing it
[ 6.431804] r8169: mobo: link down
[ 6.433992] r8169: mobo: link down
[ 6.431804] ADDRCONF(NETDEV_UP): mobo: link is not ready
[ 6.907881] r8169: mobo: link up
[ 6.916340] ADDRCONF(NETDEV_CHANGE): mobo: link becomes ready
[ 6.930927] console [netcon0] enabled
[ 6.989436] netconsole: network logging started
[ 7.077462] device-mapper: uevent: version 1.0.3
[ 7.077462] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 7.128869] md: md3 stopped.
[ 7.203243] md: bind<sda5>
[ 7.203270] md: bind<sdb5>
[ 7.213092] raid1: raid set md3 active with 2 out of 2 mirrors
[ 9.462901] fuse init (API version 7.9)
[ 9.613115] kjournald starting. Commit interval 5 seconds
[ 9.648150] EXT3 FS on dm-0, internal journal
[ 9.648281] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.714664] kjournald starting. Commit interval 5 seconds
[ 9.714728] EXT3 FS on dm-1, internal journal
[ 9.714853] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.757664] kjournald starting. Commit interval 5 seconds
[ 9.757683] EXT3 FS on dm-2, internal journal
[ 9.757683] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.807357] kjournald starting. Commit interval 5 seconds
[ 9.807357] EXT3 FS on dm-3, internal journal
[ 9.807357] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.949855] __ratelimit: 99 messages suppressed
[ 10.949855] type=1400 audit(1216911812.374:29): avc: denied { getattr } for pid=1240 comm="alsa-utils" path="/var/lib/alsa/asound.state" dev=dm-1 ino=655366 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:var_lib_t:s0 tclass=file
[ 12.772197] NET: Registered protocol family 15
[ 13.185460] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.289625] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 13.934640] rtl: link down
[ 13.934640] ADDRCONF(NETDEV_UP): rtl: link is not ready
[ 14.667829] ttyS1: LSR safety check engaged!
[ 14.667870] ttyS1: LSR safety check engaged!
[ 17.018055] firmware: requesting intel-ucode/06-0f-0d
[ 17.077251] firmware: requesting intel-ucode/06-0f-0d
[ 17.077364] IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
[ 17.141598] microcode: CPU0 updated from revision 0xa1 to 0xa3, date = 08132007
[ 17.141810] microcode: CPU1 updated from revision 0xa1 to 0xa3, date = 08132007
[ 42.597389] RPC: Registered udp transport module.
[ 42.597389] RPC: Registered tcp transport module.
[ 42.921288] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 43.094238] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 43.226258] NFSD: starting 90-second grace period
[ 53.427883] device mobo entered promiscuous mode
[ 53.443555] device mobo left promiscuous mode
[ 53.459186] device mobo entered promiscuous mode
[ 59.367901] Initializing XFRM netlink socket
[ 62.574567] ttyS1: LSR safety check engaged!
[ 63.247403] Bluetooth: Core ver 2.11
[ 63.249496] NET: Registered protocol family 31
[ 63.249607] Bluetooth: HCI device and connection manager initialized
[ 63.249715] Bluetooth: HCI socket layer initialized
[ 63.275906] Bluetooth: L2CAP ver 2.9
[ 63.276018] Bluetooth: L2CAP socket layer initialized
[ 63.314702] Bluetooth: RFCOMM socket layer initialized
[ 63.314823] Bluetooth: RFCOMM TTY layer initialized
[ 63.314925] Bluetooth: RFCOMM ver 1.8
[ 68.815816] [drm] Initialized drm 1.1.0 20060810
[ 68.895173] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 68.896841] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 69.392331] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 101.199286] ioctl32(gnome-terminal:5099): Unknown cmd fd(19) cmd(0000530b){t:'S';sz:0} arg(4ac58c2a) on /dev/pts/0
[ 101.199286] ioctl32(gnome-terminal:5099): Unknown cmd fd(19) cmd(0000530b){t:'S';sz:0} arg(4ac58c2f) on /dev/pts/0
[ 101.199286] ioctl32(gnome-terminal:5099): Unknown cmd fd(19) cmd(0000530b){t:'S';sz:0} arg(4ac58c36) on /dev/pts/0
[ 138.077160] ioctl32(gnome-terminal:5256): Unknown cmd fd(25) cmd(0000530b){t:'S';sz:0} arg(4ac58c2a) on /dev/pts/1
[ 138.080047] ioctl32(gnome-terminal:5256): Unknown cmd fd(25) cmd(0000530b){t:'S';sz:0} arg(4ac58c2f) on /dev/pts/1
[ 138.080166] ioctl32(gnome-terminal:5256): Unknown cmd fd(25) cmd(0000530b){t:'S';sz:0} arg(4ac58c36) on /dev/pts/1
[ 140.555330] ioctl32(gnome-terminal:5299): Unknown cmd fd(26) cmd(0000530b){t:'S';sz:0} arg(4ac58c2a) on /dev/pts/2
[ 140.557362] ioctl32(gnome-terminal:5299): Unknown cmd fd(26) cmd(0000530b){t:'S';sz:0} arg(4ac58c2f) on /dev/pts/2
[ 140.557569] ioctl32(gnome-terminal:5299): Unknown cmd fd(26) cmd(0000530b){t:'S';sz:0} arg(4ac58c36) on /dev/pts/2
[ 162.744075] ioctl32(gnome-terminal:5363): Unknown cmd fd(27) cmd(0000530b){t:'S';sz:0} arg(4ac58c2a) on /dev/pts/3
[ 162.744094] ioctl32(gnome-terminal:5363): Unknown cmd fd(27) cmd(0000530b){t:'S';sz:0} arg(4ac58c2f) on /dev/pts/3
[ 162.744099] ioctl32(gnome-terminal:5363): Unknown cmd fd(27) cmd(0000530b){t:'S';sz:0} arg(4ac58c36) on /dev/pts/3
[ 164.238901] ioctl32(gnome-terminal:5405): Unknown cmd fd(28) cmd(0000530b){t:'S';sz:0} arg(4ac58c2a) on /dev/pts/4
[ 164.238919] ioctl32(gnome-terminal:5405): Unknown cmd fd(28) cmd(0000530b){t:'S';sz:0} arg(4ac58c2f) on /dev/pts/4
[ 164.238925] ioctl32(gnome-terminal:5405): Unknown cmd fd(28) cmd(0000530b){t:'S';sz:0} arg(4ac58c36) on /dev/pts/4
[ 165.088925] ioctl32(gnome-terminal:5447): Unknown cmd fd(29) cmd(0000530b){t:'S';sz:0} arg(4ac58c2a) on /dev/pts/5
[ 165.088948] ioctl32(gnome-terminal:5447): Unknown cmd fd(29) cmd(0000530b){t:'S';sz:0} arg(4ac58c2f) on /dev/pts/5
[ 165.088954] ioctl32(gnome-terminal:5447): Unknown cmd fd(29) cmd(0000530b){t:'S';sz:0} arg(4ac58c36) on /dev/pts/5
[ 166.232412] ioctl32(gnome-terminal:5490): Unknown cmd fd(30) cmd(0000530b){t:'S';sz:0} arg(4ac58c2a) on /dev/pts/6
[ 166.232412] ioctl32(gnome-terminal:5490): Unknown cmd fd(30) cmd(0000530b){t:'S';sz:0} arg(4ac58c2f) on /dev/pts/6
[ 166.232412] ioctl32(gnome-terminal:5490): Unknown cmd fd(30) cmd(0000530b){t:'S';sz:0} arg(4ac58c36) on /dev/pts/6
[ 167.055135] ioctl32(gnome-terminal:5535): Unknown cmd fd(31) cmd(0000530b){t:'S';sz:0} arg(4ac58c2a) on /dev/pts/7
[ 167.055155] ioctl32(gnome-terminal:5535): Unknown cmd fd(31) cmd(0000530b){t:'S';sz:0} arg(4ac58c2f) on /dev/pts/7
[ 167.055161] ioctl32(gnome-terminal:5535): Unknown cmd fd(31) cmd(0000530b){t:'S';sz:0} arg(4ac58c36) on /dev/pts/7
[ 167.775924] ioctl32(gnome-terminal:5577): Unknown cmd fd(32) cmd(0000530b){t:'S';sz:0} arg(4ac58c2a) on /dev/pts/8
[ 167.775942] ioctl32(gnome-terminal:5577): Unknown cmd fd(32) cmd(0000530b){t:'S';sz:0} arg(4ac58c2f) on /dev/pts/8
[ 167.775948] ioctl32(gnome-terminal:5577): Unknown cmd fd(32) cmd(0000530b){t:'S';sz:0} arg(4ac58c36) on /dev/pts/8
[ 168.530811] ioctl32(gnome-terminal:5619): Unknown cmd fd(33) cmd(0000530b){t:'S';sz:0} arg(4ac58c2a) on /dev/pts/9
[ 168.530832] ioctl32(gnome-terminal:5619): Unknown cmd fd(33) cmd(0000530b){t:'S';sz:0} arg(4ac58c2f) on /dev/pts/9
[ 168.530838] ioctl32(gnome-terminal:5619): Unknown cmd fd(33) cmd(0000530b){t:'S';sz:0} arg(4ac58c36) on /dev/pts/9
[ 177.572826] __ratelimit: 24 messages suppressed
[ 177.572837] rtc: lost 1 interrupts
[ 1019.627462] [drm:drm_update_drawable_info] *ERROR* Failed to copy cliprects from userspace
[ 1035.463517] usb 1-2: USB disconnect, address 3
[ 1192.154032] NMI Watchdog detected LOCKUP on CPU 0
[ 1192.154032] CPU 0
[ 1192.154032] Modules linked in: i915 drm rfcomm l2cap bluetooth xfrm_user xfrm4_tunnel tunnel4 ipcomp esp4 aead ah4 nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs microcode ipt_REJECT nf_conntrack_ipv4 xt_state nf_conntrack xt_tcpudp ipt_LOG xt_limit iptable_filter ip_tables x_tables deflate zlib_deflate zlib_inflate ctr twofish twofish_common camellia serpent blowfish des_generic cbc aes_x86_64 aes_generic xcbc sha256_generic sha1_generic md5 crypto_null af_key fuse dm_crypt crypto_blkcipher dm_snapshot dm_mirror dm_log dm_mod netconsole configfs coretemp w83627ehf hwmon_vid sg snd_hda_intel snd_pcm sr_mod snd_timer r8169 8139too iTCO_wdt video cdrom 8250_pnp 8250 serial_core i2c_i801 snd floppy snd_page_alloc
[ 1192.154032] Pid: 0, comm: swapper Not tainted 2.6.26 #16
[ 1192.154032] RIP: 0010:[<ffffffff8021cc9f>] [<ffffffff8021cc9f>] hpet_rtc_interrupt+0x120/0x2f3
[ 1192.154032] RSP: 0018:ffffffff806e0eb8 EFLAGS: 00000046
[ 1192.154032] RAX: 0000000000000004 RBX: 0000000000000002 RCX: 0000000000000000
[ 1192.154032] RDX: 00000000d4ba4d4a RSI: 0000000000000002 RDI: 0000000000000002
[ 1192.154032] RBP: ffffffff806e0f18 R08: ffffffffff5fc128 R09: 0000000000000000
[ 1192.154032] R10: ffff8100affafd30 R11: ffffffff80685e98 R12: 00000000000000a6
[ 1192.154032] R13: 0000000100033c91 R14: ffff81012f1b8c00 R15: ffffffff80690140
[ 1192.154032] FS: 0000000000000000(0000) GS:ffffffff8066d000(0000) knlGS:0000000000000000
[ 1192.154032] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[ 1192.154032] CR2: 000000000804fa50 CR3: 0000000000201000 CR4: 00000000000006e0
[ 1192.154032] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1192.154032] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1192.154032] Process swapper (pid: 0, threadinfo ffffffff80684000, task ffffffff80633350)
[ 1192.154032] Stack: ffff81012c9d2c00 ffff810122b50000 0000000000000000 0000000000000000
[ 1192.154032] 0000000000000000 0000000000000000 ffffffff00000000 00000000000e6d36
[ 1192.154032] ffff81012fce4880 0000000000000000 0000000000000000 0000000000000008
[ 1192.154032] Call Trace:
[ 1192.154032] <IRQ> [<ffffffff8026746c>] handle_IRQ_event+0x2e/0x65
[ 1192.154032] [<ffffffff80268571>] handle_edge_irq+0xe9/0x12a
[ 1192.154032] [<ffffffff8020e6d0>] do_IRQ+0xf7/0x169
[ 1192.154032] [<ffffffff8020b9bd>] ret_from_intr+0x0/0x19
[ 1192.154032] <EOI> [<ffffffff80421208>] ? poll_idle+0x2d/0x61
[ 1192.154032] [<ffffffff804211e9>] ? poll_idle+0xe/0x61
[ 1192.154032] [<ffffffff80420f64>] ? cpuidle_idle_call+0x0/0xc1
[ 1192.154032] [<ffffffff80209370>] ? default_idle+0x0/0x4b
[ 1192.154032] [<ffffffff80420ff1>] ? cpuidle_idle_call+0x8d/0xc1
[ 1192.154032] [<ffffffff80420f64>] ? cpuidle_idle_call+0x0/0xc1
[ 1192.154032] [<ffffffff80209370>] ? default_idle+0x0/0x4b
[ 1192.154032] [<ffffffff8020a53a>] ? cpu_idle+0x92/0xda
[ 1192.154032] [<ffffffff804c2188>] ? rest_init+0x5c/0x5e
[ 1192.154032]
[ 1192.154032]
[ 1192.154032] Code: 4d 2b 00 bf 0a 00 00 00 48 89 c3 e8 34 52 ff ff 48 89 de 41 88 c4 48 c7 c7 18 9f 6e 80 e8 ad 4e 2b 00 45 84 e4 78 04 eb 12 f3 90 <48> 8b 05 da 5b 46 00 4c 29 e8 48 83 f8 04 76 ee 48 c7 c7 18 9f
[ 1192.154032] ---[ end trace e0221fdc14e85140 ]---
[ 1197.498241] Kernel panic - not syncing: Aiee, killing interrupt handler!
--
---------------------------------------------------------
MTA SZTAKI Computer and Automation Research Institute
Hungarian Academy of Sciences
---------------------------------------------------------
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Solid freezes with 2.6.25
2008-07-25 8:52 ` Gabor Gombas
@ 2008-07-25 9:04 ` Bernhard Walle
2008-08-25 12:27 ` Gabor Gombas
0 siblings, 1 reply; 21+ messages in thread
From: Bernhard Walle @ 2008-07-25 9:04 UTC (permalink / raw)
To: Gabor Gombas; +Cc: Andrew Morton, linux-kernel, Ingo Molnar, Thomas Gleixner
* Gabor Gombas [2008-07-25 10:52]:
>
> On Sun, Jun 15, 2008 at 07:11:41PM +0200, Gabor Gombas wrote:
> > On Tue, May 13, 2008 at 04:39:29PM +0200, Gabor Gombas wrote:
> > > On Mon, May 12, 2008 at 02:21:46PM +0200, Bernhard Walle wrote:
> > >
> > > > Well, can you try if that really not happens without
> > > > CONFIG_HPET_EMULATE_RTC? The question is if that 64 interrupts per second really
> > > > cause a machine hang ...
> > >
> > > I'll try when I have a little time...
> >
> > Ok, it took much more time than I'd have liked, but now I'm having:
> >
> > $ uname -a
> > Linux boogie 2.6.25 #3 SMP Thu Jun 12 13:32:35 CEST 2008 x86_64 GNU/Linux
> > $ grep EMULATE_RTC /boot/config-2.6.25
> > # CONFIG_HPET_EMULATE_RTC is not set
> > $ uptime
> > 19:07:17 up 3 days, 4:07, 12 users, load average: 0.14, 0.31, 0.20
> >
> > So I'd say it works.
>
> FYI, the bug is still present in 2.6.26. I also got the same hang on a
> Dell PowerEdge 850 using a Debian-provided kernel (based on 2.6.25.6);
> that is the 3rd distinct HW configuration that hangs.
Did you try that patch?
-------------- 8< ---------------------------------------------------
From: David Brownell <dbrownell@users.sourceforge.net>
Resolve http://bugzilla.kernel.org/show_bug.cgi?id=11051 and other bugs
related to the way the HPET glue code in rtc-cmos was incomplete and
inconsistent:
* Switch the approach so that the basic driver code flow isn't
changed by having HPET ... instead, just have HPET shadow the
RTC_CONTROL irq enables and RTC_FREQ_SELECT data. It's only
coping with IRQ thievery, after all.
* Do that consistently (!!) to avoid problems when the HPET code
is out of sync with the real RTC intent. Examples include:
- cmos_procfs(), which now reports correct data
- cmos_irq_set_state() ... also removing the previous PIE_{ON,OFF}
ioctl support so only one code path manages "periodic" IRQs
- cmos_do_shutdown() ... currently a "just in case" change.
- cmos_suspend() and cmos_resume() ... also handling a bug that
was specific to HPET's IRQ thievery, where the alarm wasn't
disabled after waking the system
* Always call that HPET code under the RTC spinlock (it doesn't do
its own locking)
-------------- >8 ---------------------------------------------------
Bernhard
--
Bernhard Walle, SUSE LINUX Products GmbH, Architecture Development
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Solid freezes with 2.6.25
2008-07-25 9:04 ` Bernhard Walle
@ 2008-08-25 12:27 ` Gabor Gombas
0 siblings, 0 replies; 21+ messages in thread
From: Gabor Gombas @ 2008-08-25 12:27 UTC (permalink / raw)
To: Bernhard Walle; +Cc: Andrew Morton, linux-kernel, Ingo Molnar, Thomas Gleixner
On Fri, Jul 25, 2008 at 11:04:38AM +0200, Bernhard Walle wrote:
> Did you try that patch?
>
> -------------- 8< ---------------------------------------------------
> From: David Brownell <dbrownell@users.sourceforge.net>
>
> Resolve http://bugzilla.kernel.org/show_bug.cgi?id=11051 and other bugs
> related to the way the HPET glue code in rtc-cmos was incomplete and
> inconsistent:
>
> * Switch the approach so that the basic driver code flow isn't
> changed by having HPET ... instead, just have HPET shadow the
> RTC_CONTROL irq enables and RTC_FREQ_SELECT data. It's only
> coping with IRQ thievery, after all.
>
> * Do that consistently (!!) to avoid problems when the HPET code
> is out of sync with the real RTC intent. Examples include:
>
> - cmos_procfs(), which now reports correct data
>
> - cmos_irq_set_state() ... also removing the previous PIE_{ON,OFF}
> ioctl support so only one code path manages "periodic" IRQs
>
> - cmos_do_shutdown() ... currently a "just in case" change.
>
> - cmos_suspend() and cmos_resume() ... also handling a bug that
> was specific to HPET's IRQ thievery, where the alarm wasn't
> disabled after waking the system
>
> * Always call that HPET code under the RTC spinlock (it doesn't do
> its own locking)
> -------------- >8 ---------------------------------------------------
Sorry for the delay. I thought I had this patch applied but I've now
verified: 2.6.26.3 + the above patch still hangs. dmesg below.
Gabor
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] Initializing cgroup subsys cpuset
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] Linux version 2.6.26.3 (gombasg@boogie) (gcc version 4.3.1 (Debian 4.3.1-9) ) #18 SMP Mon Aug 25 11:17:25 CEST 2008
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] Command line: BOOT_IMAGE=l26263 ro root=900 video=intelfb:1280x1024-16@60 resume=/dev/sda2 selinux=1 audit=1 nmi_watchdog=2
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] BIOS-provided physical RAM map:
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf2ac000 (usable)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] BIOS-e820: 00000000cf2ac000 - 00000000cf2ef000 (ACPI NVS)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] BIOS-e820: 00000000cf2ef000 - 00000000cf3c7000 (reserved)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] BIOS-e820: 00000000cf3c7000 - 00000000cf3d7000 (ACPI NVS)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] BIOS-e820: 00000000cf3d7000 - 00000000cf453000 (reserved)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] BIOS-e820: 00000000cf453000 - 00000000cf459000 (ACPI data)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] BIOS-e820: 00000000cf459000 - 00000000cf45a000 (ACPI NVS)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] BIOS-e820: 00000000cf45a000 - 00000000cf45c000 (ACPI data)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] BIOS-e820: 00000000cf45c000 - 00000000cf45d000 (ACPI NVS)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] BIOS-e820: 00000000cf45d000 - 00000000cf45e000 (reserved)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] BIOS-e820: 00000000cf45e000 - 00000000cf463000 (ACPI NVS)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] BIOS-e820: 00000000cf463000 - 00000000cf472000 (reserved)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] BIOS-e820: 00000000cf472000 - 00000000cf600000 (usable)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] max_pfn_mapped = 1245184
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] init_memory_mapping
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] DMI 2.4 present.
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] ACPI: RSDP 000F03C0, 0024 (r2 INTEL)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] ACPI: XSDT CF45AF10, 0044 (r1 INTEL DG31PR 6222004 MSFT 10013)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] ACPI: FACP CF458D90, 00F4 (r4 INTEL DG31PR 6222004 MSFT 10013)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] ACPI: DSDT CF453010, 4D33 (r1 INTEL DG31PR 0 INTL 20051117)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] ACPI: FACS CF459F40, 0040
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] ACPI: APIC CF458F10, 006C (r2 INTEL DG31PR 6222004 MSFT 10013)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] ACPI: HPET CF461D10, 0038 (r1 INTEL ICH7HPET 6222004 AMI. 1)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] ACPI: MCFG CF461C10, 003C (r1 INTEL DG31PR 6222004 MSFT 97)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] early res: 0 [0-fff] BIOS data page
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] early res: 2 [200000-7582fb] TEXT DATA BSS
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] early res: 3 [9fc00-fffff] BIOS reserved
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] early res: 4 [8000-dfff] PGTABLE
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] Zone PFN ranges:
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] DMA 0 -> 4096
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] DMA32 4096 -> 1048576
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] Normal 1048576 -> 1245184
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] Movable zone start PFN for each node
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] early_node_map[4] active PFN ranges
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] 0: 0 -> 159
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] 0: 256 -> 848556
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] 0: 849010 -> 849408
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] 0: 1048576 -> 1245184
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] ACPI: PM-Timer IO Port: 0x408
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] IOAPIC[0]: apic_id 0, version 0, address 0xfec00000, GSI 0-23
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] Setting APIC routing to flat
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] Using ACPI (MADT) for SMP configuration information
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] Allocating PCI resources starting at d0000000 (gap: cf600000:2f71c000)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] PERCPU: Allocating 35632 bytes of per cpu data
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1026966
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] Kernel command line: BOOT_IMAGE=l26263 ro root=900 video=intelfb:1280x1024-16@60 resume=/dev/sda2 selinux=1 audit=1 nmi_watchdog=2
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] audit: enabled (after initialization)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] Initializing CPU#0
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] Extended CMOS year: 2000
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] TSC calibrated against PM_TIMER
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.000000] time.c: Detected 2199.952 MHz processor.
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.004000] Console: colour VGA+ 80x50
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.004000] console [tty0] enabled
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.004000] Checking aperture...
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.004000] Placing software IO TLB between 0x1640000 - 0x5640000
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.004000] Memory: 4033484k/4980736k available (2899k kernel code, 147652k reserved, 1629k data, 304k init)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.083913] Calibrating delay using timer specific routine.. 4403.44 BogoMIPS (lpj=8806888)
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.084005] Security Framework initialized
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.084005] SELinux: Initializing.
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.084005] selinux_register_security: Registering secondary module capability
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.084005] Capability LSM initialized as secondary
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.084005] Mount-cache hash table entries: 256
Aug 25 12:39:00 boogie.lpds.sztaki.hu [ 0.084005] Initializing cgroup subsys ns
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.084005] Initializing cgroup subsys cpuacct
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.084005] Initializing cgroup subsys devices
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.084005] CPU: L2 cache: 1024K
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.084005] CPU: Physical Processor ID: 0
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.084005] CPU: Processor Core ID: 0
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.084005] CPU0: Thermal monitoring enabled (TM2)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.084005] using mwait in idle threads.
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.084005] ACPI: Core revision 20080321
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.131246] CPU0: Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz stepping 0d
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.131391] Using local APIC timer interrupts.
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.136008] Detected 12.499 MHz APIC timer.
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.136008] Booting processor 1/1 ip 6000
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.144009] Initializing CPU#1
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.144009] Calibrating delay using timer specific routine.. 4399.89 BogoMIPS (lpj=8799795)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.144009] CPU: L1 I cache: 32K, L1 D cache: 32K
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.144009] CPU: L2 cache: 1024K
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.144009] CPU: Physical Processor ID: 0
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.144009] CPU: Processor Core ID: 1
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.144009] CPU1: Thermal monitoring enabled (TM2)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.144009] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.224014] CPU1: Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz stepping 0d
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.224014] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.228014] Brought up 2 CPUs
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.228014] Total of 2 processors activated (8803.34 BogoMIPS).
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.228014] Testing NMI watchdog ... OK.
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.308019] net_namespace: 1224 bytes
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.308019] Booting paravirtualized kernel on bare hardware
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.308019] xor: automatically using best checksumming function: generic_sse
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.324907] generic_sse: 8048.000 MB/sec
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.325004] xor: using function: generic_sse (8048.000 MB/sec)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.325134] NET: Registered protocol family 16
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.328126] No dock devices found.
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.328126] ACPI: bus type pci registered
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.328126] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 64
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.328126] PCI: Not using MMCONFIG.
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.328126] PCI: Using configuration type 1 for base access
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.334292] ACPI: Interpreter enabled
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.334391] ACPI: (supports S0 S5)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.334528] ACPI: Using IOAPIC for interrupt routing
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.334676] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 64
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.336127] PCI: BIOS Bug: MCFG area at e0000000 is not reserved in ACPI motherboard resources
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.336127] PCI: Not using MMCONFIG.
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.340127] ACPI: BIOS _OSI(Linux) query ignored
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.340127] ACPI: DMI System Vendor:
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.340127] ACPI: DMI Product Name:
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.340127] ACPI: DMI Product Version:
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.340127] ACPI: DMI Board Name: DG31PR
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.340127] ACPI: DMI BIOS Vendor: Intel Corp.
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.340127] ACPI: DMI BIOS Date: 02/27/2008
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.340127] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.340127] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.344127] ACPI: PCI Root Bridge [PCI0] (0000:00)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.344687] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.344858] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.345411] PCI: Transparent bridge - 0000:00:1e.0
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.352128] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.352128] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.352128] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.352128] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.352128] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.352128] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.352128] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.352660] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.356128] Linux Plug and Play Support v0.97 (c) Adam Belay
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.356128] pnp: PnP ACPI init
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.356128] ACPI: bus type pnp registered
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.360128] pnp: PnP ACPI: found 13 devices
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.360128] ACPI: ACPI bus type pnp unregistered
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.364129] SCSI subsystem initialized
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.364129] usbcore: registered new interface driver usbfs
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.364129] usbcore: registered new interface driver hub
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.364129] usbcore: registered new device driver usb
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.364129] PCI: Using ACPI for IRQ routing
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.378259] NetLabel: Initializing
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.378364] NetLabel: domain hash size = 128
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.378470] NetLabel: protocols = UNLABELED CIPSOv4
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.378578] NetLabel: unlabeled traffic allowed by default
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.378691] PCI-GART: No AMD northbridge found.
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.378790] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.378969] hpet0: 3 64-bit timers, 14318180 Hz
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.380101] ACPI: RTC can wake from S4
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.394417] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.394532] system 00:01: iomem range 0xe0000000-0xe3ffffff has been reserved
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.394647] system 00:02: ioport range 0x400-0x47f has been reserved
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.394749] system 00:02: ioport range 0x1180-0x119f has been reserved
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.394852] system 00:02: ioport range 0x500-0x53f has been reserved
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.394954] system 00:02: iomem range 0xfec00000-0xfecfffff has been reserved
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.395057] system 00:02: iomem range 0xfee00000-0xfee0ffff has been reserved
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.395161] system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.395331] system 00:02: iomem range 0xffb00000-0xffcfffff could not be reserved
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.395501] system 00:02: iomem range 0xfc800000-0xfc800fff has been reserved
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.395605] system 00:02: iomem range 0xfed20000-0xfed7ffff has been reserved
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.395710] system 00:02: iomem range 0xffe00000-0xffffffff could not be reserved
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.395883] system 00:03: ioport range 0x290-0x29f has been reserved
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.395993] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.396339] PCI: Bridge: 0000:00:01.0
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.396339] IO window: disabled.
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.396339] MEM window: disabled.
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.396339] PREFETCH window: disabled.
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.396339] PCI: Bridge: 0000:00:1c.0
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.396339] IO window: disabled.
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.396339] MEM window: disabled.
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.396339] PREFETCH window: disabled.
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.396339] PCI: Bridge: 0000:00:1c.1
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.396339] IO window: e000-efff
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.396339] MEM window: 0xff800000-0xff8fffff
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.396339] PREFETCH window: disabled.
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.396339] PCI: Bridge: 0000:00:1e.0
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.396339] IO window: d000-dfff
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.396339] MEM window: 0xff700000-0xff7fffff
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.396339] PREFETCH window: disabled.
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.396339] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.396339] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.398416] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.398629] NET: Registered protocol family 2
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.438674] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.439338] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.442617] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.443231] TCP: Hash tables configured (established 262144 bind 65536)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.443335] TCP reno registered
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.451847] NET: Registered protocol family 1
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.454659] audit: initializing netlink socket (enabled)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.454659] type=2000 audit(1219660733.448:1): initialized
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.458677] VFS: Disk quotas dquot_6.5.1
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.458677] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.458685] msgmni has been set to 7879
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.458685] async_tx: api initialized (sync-only)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.458685] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.458685] io scheduler noop registered
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.458685] io scheduler anticipatory registered
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.458685] io scheduler deadline registered
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.458685] io scheduler cfq registered (default)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.458685] assign_interrupt_mode Found MSI capability
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.458685] assign_interrupt_mode Found MSI capability
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.458685] assign_interrupt_mode Found MSI capability
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.458740] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.458913] ACPI: Power Button (FF) [PWRF]
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.459099] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.459275] ACPI: Sleep Button (CM) [SLPB]
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.459429] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.459604] ACPI: Power Button (CM) [PWRB]
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.459998] ACPI: SSDT CF45EC10, 02CC (r1 AMI IST 1 MSFT 3000001)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.466682] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.466682] ACPI: ACPI0007:00 is registered as cooling_device0
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.466682] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.466682] ACPI: ACPI0007:01 is registered as cooling_device1
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.524676] Linux agpgart interface v0.103
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.524788] agpgart: Detected an Intel G33 Chipset.
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.525234] agpgart: Detected 7164K stolen memory.
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.538296] agpgart: AGP aperture is 256M @ 0xd0000000
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.538328] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.538328] Hangcheck: Using get_cycles().
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.538328] Driver 'sd' needs updating - please use bus_type methods
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.538328] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.538328] scsi0 : ata_piix
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.538328] scsi1 : ata_piix
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.539840] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0f0 irq 14
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.539840] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf0f8 irq 15
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.696395] ata1.00: ATAPI: ASUS DRW-1814BL, 1.13, max UDMA/66
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.712136] ata1.00: configured for UDMA/66
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.716236] scsi 0:0:0:0: CD-ROM ASUS DRW-1814BL 1.13 PQ: 0 ANSI: 5
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.718824] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.718824] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.718824] scsi2 : ata_piix
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.718824] scsi3 : ata_piix
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.718824] ata3: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 17
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.718824] ata4: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 17
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.879778] ata3.00: ATA-7: Maxtor 7L250S0, BACE1G10, max UDMA/133
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.879893] ata3.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 0/32)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 0.897186] ata3.00: configured for UDMA/133
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.062433] ata4.00: ATA-7: Maxtor 7L250S0, BACE1G10, max UDMA/133
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.062547] ata4.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 0/32)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.080914] ata4.00: configured for UDMA/133
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.080914] scsi 2:0:0:0: Direct-Access ATA Maxtor 7L250S0 BACE PQ: 0 ANSI: 5
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.080914] sd 2:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.080914] sd 2:0:0:0: [sda] Write Protect is off
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.080914] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.080914] sd 2:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.080914] sd 2:0:0:0: [sda] Write Protect is off
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.080914] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.080914] sda: sda1 sda2 sda3 < sda5 >
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.105310] sd 2:0:0:0: [sda] Attached SCSI disk
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.105310] scsi 3:0:0:0: Direct-Access ATA Maxtor 7L250S0 BACE PQ: 0 ANSI: 5
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.105310] sd 3:0:0:0: [sdb] 488281250 512-byte hardware sectors (250000 MB)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.105310] sd 3:0:0:0: [sdb] Write Protect is off
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.105310] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.105310] sd 3:0:0:0: [sdb] 488281250 512-byte hardware sectors (250000 MB)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.105310] sd 3:0:0:0: [sdb] Write Protect is off
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.105310] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.105310] sdb: sdb1 sdb2 sdb3 < sdb5 >
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.155832] sd 3:0:0:0: [sdb] Attached SCSI disk
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.155832] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.155832] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.155832] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.159828] ehci_hcd 0000:00:1d.7: debug port 1
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.159828] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff984000
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.175838] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.181123] usb usb1: configuration #1 chosen from 1 choice
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.181123] hub 1-0:1.0: USB hub found
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.181123] hub 1-0:1.0: 8 ports detected
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.284327] USB Universal Host Controller Interface driver v3.0
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.284327] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.284338] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.284880] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.284880] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.284880] usb usb2: configuration #1 chosen from 1 choice
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.284880] hub 2-0:1.0: USB hub found
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.284880] hub 2-0:1.0: 2 ports detected
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.389275] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.389275] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.389769] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.389769] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.389769] usb usb3: configuration #1 chosen from 1 choice
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.389769] hub 3-0:1.0: USB hub found
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.389769] hub 3-0:1.0: 2 ports detected
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.493275] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.493275] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.493768] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.493768] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.493768] usb usb4: configuration #1 chosen from 1 choice
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.493769] hub 4-0:1.0: USB hub found
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.493769] hub 4-0:1.0: 2 ports detected
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.601664] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.601664] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.602158] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.602158] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.602158] usb usb5: configuration #1 chosen from 1 choice
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.602158] hub 5-0:1.0: USB hub found
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.602158] hub 5-0:1.0: 2 ports detected
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.706416] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.706416] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.706961] serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.706961] mice: PS/2 mouse device common for all mice
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.714176] usb 1-2: new high speed USB device using ehci_hcd and address 3
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.766932] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.766932] rtc0: alarms up to one year, y3k, hpet irqs
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.766932] i2c /dev entries driver
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.766932] md: raid0 personality registered for level 0
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.766932] md: raid1 personality registered for level 1
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.766932] md: raid10 personality registered for level 10
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.802813] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.838524] raid6: int64x1 2157 MB/s
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.854130] usb 1-2: configuration #1 chosen from 1 choice
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.854496] hub 1-2:1.0: USB hub found
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.854496] hub 1-2:1.0: 4 ports detected
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.906460] raid6: int64x2 2757 MB/s
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 1.974380] raid6: int64x4 2041 MB/s
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.042301] raid6: int64x8 1834 MB/s
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.110239] raid6: sse2x1 3480 MB/s
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.178166] raid6: sse2x2 3853 MB/s
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.198394] usb 2-1: new low speed USB device using uhci_hcd and address 2
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.246081] raid6: sse2x4 6664 MB/s
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.246177] raid6: using algorithm sse2x4 (6664 MB/s)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.246276] md: raid6 personality registered for level 6
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.246375] md: raid5 personality registered for level 5
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.246474] md: raid4 personality registered for level 4
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.246547] EDAC MC: Ver: 2.1.0 Aug 25 2008
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.246547] cpuidle: using governor ladder
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.246547] cpuidle: using governor menu
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.262475] Marking TSC unstable due to TSC halts in idle
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.350502] usb 2-1: configuration #1 chosen from 1 choice
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.525308] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.552197] input: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-1
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.552199] usbcore: registered new interface driver usbhid
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.552199] usbhid: v2.6:USB HID core driver
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.552202] TCP cubic registered
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.552208] NET: Registered protocol family 10
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.552208] lo: Disabled Privacy Extensions
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.552208] NET: Registered protocol family 17
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.552233] registered taskstats version 1
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.552233] rtc_cmos 00:08: setting system clock to 2008-08-25 10:38:56 UTC (1219660736)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.552241] md: Autodetecting RAID arrays.
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.593526] md: invalid raid superblock magic on sda5
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.593526] md: sda5 does not have a valid v0.90 superblock, not importing!
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.642254] md: invalid raid superblock magic on sdb5
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.642254] md: sdb5 does not have a valid v0.90 superblock, not importing!
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.642254] md: Scanned 4 and added 2 devices.
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.642254] md: autorun ...
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.642254] md: considering sdb1 ...
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.642254] md: adding sdb1 ...
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.642254] md: adding sda1 ...
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.642254] md: created md0
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.642254] md: bind<sda1>
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.642254] md: bind<sdb1>
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.642254] md: running: <sdb1><sda1>
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.642271] raid1: raid set md0 active with 2 out of 2 mirrors
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.642279] md: ... autorun DONE.
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.663742] kjournald starting. Commit interval 5 seconds
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.663742] EXT3-fs: mounted filesystem with ordered data mode.
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.663742] VFS: Mounted root (ext3 filesystem) readonly.
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 2.663742] Freeing unused kernel memory: 304k freed
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 3.320125] SELinux: policy loaded with handle_unknown=deny
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 3.320238] type=1403 audit(1219660737.190:2): policy loaded auid=4294967295 ses=4294967295
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 3.691438] type=1400 audit(1219660737.541:3): avc: denied { read write } for pid=554 comm="hostname" name="console" dev=md0 ino=51240 scontext=system_u:system_r:hostname_t:s0 tcontext=user_u:object_r:device_t:s0 tclass=chr_file
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 3.691757] type=1300 audit(1219660737.541:3): arch=40000003 syscall=11 success=yes exit=0 a0=94be374 a1=94be328 a2=94be334 a3=2 items=0 ppid=552 pid=554 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=tty1 ses=4294967295 comm="hostname" exe="/bin/hostname" subj=system_u:system_r:hostname_t:s0 key=(null)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 3.728000] type=1400 audit(1219660737.581:4): avc: denied { read write } for pid=557 comm="mountpoint" name="console" dev=md0 ino=51240 scontext=system_u:system_r:mount_t:s0 tcontext=user_u:object_r:device_t:s0 tclass=chr_file
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 3.728343] type=1300 audit(1219660737.581:4): arch=40000003 syscall=11 success=yes exit=0 a0=9e207a4 a1=9e20750 a2=9e20764 a3=2 items=0 ppid=555 pid=557 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=tty1 ses=4294967295 comm="mountpoint" exe="/bin/mountpoint" subj=system_u:system_r:mount_t:s0 key=(null)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 3.800311] type=1400 audit(1219660737.637:5): avc: denied { read write } for pid=559 comm="restorecon" name="console" dev=md0 ino=51240 scontext=system_u:system_r:setfiles_t:s0 tcontext=user_u:object_r:device_t:s0 tclass=chr_file
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 3.800668] type=1300 audit(1219660737.637:5): arch=40000003 syscall=11 success=yes exit=0 a0=9e20704 a1=9e20740 a2=9e2074c a3=9e1a17d items=0 ppid=555 pid=559 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=tty1 ses=4294967295 comm="restorecon" exe="/sbin/setfiles" subj=system_u:system_r:setfiles_t:s0 key=(null)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.249189] type=1400 audit(1219660739.082:6): avc: denied { getattr } for pid=868 comm="hdparm" path="/proc/mdstat" dev=proc ino=4026531950 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:proc_mdstat_t:s0 tclass=file
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.249189] type=1300 audit(1219660739.082:6): arch=40000003 syscall=195 success=yes exit=0 a0=86f96dc a1=ff80a78c a2=460d3ff4 a3=805b285 items=0 ppid=732 pid=868 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="hdparm" exe="/bin/dash" subj=system_u:system_r:udev_t:s0-s0:c0.c1023 key=(null)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.341381] FDC 0 is a post-1991 82077
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.358265] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.386231] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.386571] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.405485] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.414076] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.414233] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.414233] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.538234] 8139too Fast Ethernet driver 0.9.28
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.538234] ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 21 (level, low) -> IRQ 21
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.542232] eth0: RealTek RTL8139 at 0xffffc2000002e000, XX:XX:XX:XX:XX:XX, IRQ 21
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.542400] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.542400] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.546076] eth1: RTL8168b/8111b at 0xffffc20000020000, XX:XX:XX:XX:XX:XX, XID 38500000 IRQ 380
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.560023] ACPI Exception (video-1600): AE_NOT_FOUND, Evaluating _DOD [20080321]
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.560023] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:17/input/input5
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.584021] Driver 'sr' needs updating - please use bus_type methods
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.592022] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.592022] Uniform CD-ROM driver Revision: 3.20
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.610877] __ratelimit: 6 messages suppressed
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.610877] type=1400 audit(1219660739.434:8): avc: denied { search } for pid=1123 comm="mdadm" name="var" dev=md0 ino=26006 scontext=system_u:system_r:mdadm_t:s0-s0:c0.c1023 tcontext=system_u:object_r:file_t:s0 tclass=dir
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.618969] ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.626877] udev: renamed network interface eth0 to rtl
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.629906] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.631235] udev: renamed network interface eth1 to mobo
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.650877] sr 0:0:0:0: Attached scsi generic sg0 type 5
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.650877] sd 2:0:0:0: Attached scsi generic sg1 type 0
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.650877] sd 3:0:0:0: Attached scsi generic sg2 type 0
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 5.661226] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 6.095630] Adding 2008116k swap on /dev/sda2. Priority:-1 extents:1 across:2008116k
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 6.122192] Adding 2008116k swap on /dev/sdb2. Priority:-2 extents:1 across:2008116k
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 6.380803] EXT3 FS on md0, internal journal
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 6.566565] w83627ehf: Found W83627DHG chip at 0x290
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 6.584647] coretemp coretemp.0: Using relative temperature scale!
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 6.584787] coretemp coretemp.1: Using relative temperature scale!
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 6.638497] netconsole: local port 4444
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 6.638497] netconsole: local IP 193.224.70.237
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 6.638497] netconsole: interface mobo
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 6.638497] netconsole: remote port 3333
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 6.638497] netconsole: remote IP XXX.XXX.XX.XXX
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 6.638497] netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 6.638497] netconsole: device mobo not up yet, forcing it
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 6.638497] r8169: mobo: link down
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 6.638497] r8169: mobo: link down
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 6.638497] ADDRCONF(NETDEV_UP): mobo: link is not ready
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 7.231127] r8169: mobo: link up
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 7.231340] ADDRCONF(NETDEV_CHANGE): mobo: link becomes ready
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 7.251227] console [netcon0] enabled
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 7.381449] netconsole: network logging started
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 7.410873] md: md3 stopped.
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 7.469057] md: bind<sda5>
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 7.469068] md: bind<sdb5>
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 7.477047] raid1: raid set md3 active with 2 out of 2 mirrors
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 7.687420] device-mapper: uevent: version 1.0.3
Aug 25 12:39:01 boogie.lpds.sztaki.hu [ 7.687420] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
Aug 25 12:39:03 boogie.lpds.sztaki.hu [ 9.958270] fuse init (API version 7.9)
Aug 25 12:39:03 boogie.lpds.sztaki.hu [ 10.121198] kjournald starting. Commit interval 5 seconds
Aug 25 12:39:03 boogie.lpds.sztaki.hu [ 10.161215] EXT3 FS on dm-0,
Aug 25 12:39:03 boogie.lpds.sztaki.hu internal journal
Aug 25 12:39:03 boogie.lpds.sztaki.hu [ 10.161215] EXT3-fs: mounted filesystem with ordered data mode.
Aug 25 12:39:03 boogie.lpds.sztaki.hu [ 10.221562] kjournald starting. Commit interval 5 seconds
Aug 25 12:39:03 boogie.lpds.sztaki.hu [ 10.229255] EXT3 FS on dm-1,
Aug 25 12:39:03 boogie.lpds.sztaki.hu internal journal
Aug 25 12:39:03 boogie.lpds.sztaki.hu [ 10.229255] EXT3-fs: mounted filesystem with ordered data mode.
Aug 25 12:39:03 boogie.lpds.sztaki.hu [ 10.291432] kjournald starting. Commit interval 5 seconds
Aug 25 12:39:03 boogie.lpds.sztaki.hu [ 10.291461] EXT3 FS on dm-2,
Aug 25 12:39:03 boogie.lpds.sztaki.hu internal journal
Aug 25 12:39:03 boogie.lpds.sztaki.hu [ 10.291461] EXT3-fs: mounted filesystem with ordered data mode.
Aug 25 12:39:03 boogie.lpds.sztaki.hu [ 10.357719] kjournald starting. Commit interval 5 seconds
Aug 25 12:39:03 boogie.lpds.sztaki.hu [ 10.357818] EXT3 FS on dm-3,
Aug 25 12:39:03 boogie.lpds.sztaki.hu internal journal
Aug 25 12:39:03 boogie.lpds.sztaki.hu [ 10.357942] EXT3-fs: mounted filesystem with ordered data mode.
Aug 25 12:39:04 boogie.lpds.sztaki.hu [ 11.306340] __ratelimit: 99 messages suppressed
Aug 25 12:39:04 boogie.lpds.sztaki.hu [ 11.306340] type=1400 audit(1219660744.483:25): avc: denied { getattr } for pid=1238 comm="alsa-utils" path="/var/lib/alsa/asound.state" dev=dm-1 ino=655366 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:var_lib_t:s0 tclass=file
Aug 25 12:39:06 boogie.lpds.sztaki.hu [ 13.236194] ip_tables: (C) 2000-2006 Netfilter Core Team
Aug 25 12:39:06 boogie.lpds.sztaki.hu [ 13.394169] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Aug 25 12:39:07 boogie.lpds.sztaki.hu [ 14.265765] rtl: link down
Aug 25 12:39:07 boogie.lpds.sztaki.hu [ 14.266033] ADDRCONF(NETDEV_UP): rtl: link is not ready
Aug 25 12:39:08 boogie.lpds.sztaki.hu [ 15.061174] ttyS1: LSR safety check engaged!
Aug 25 12:39:08 boogie.lpds.sztaki.hu [ 15.061203] ttyS1: LSR safety check engaged!
Aug 25 12:39:10 boogie.lpds.sztaki.hu [ 17.917167] firmware: requesting intel-ucode/06-0f-0d
Aug 25 12:39:10 boogie.lpds.sztaki.hu [ 17.973386] firmware: requesting intel-ucode/06-0f-0d
Aug 25 12:39:10 boogie.lpds.sztaki.hu [ 17.997024] IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
Aug 25 12:39:11 boogie.lpds.sztaki.hu [ 18.065575] microcode: CPU0 updated from revision 0xa1 to 0xa3, date = 08132007
Aug 25 12:39:11 boogie.lpds.sztaki.hu [ 18.069486] microcode: CPU1 updated from revision 0xa1 to 0xa3, date = 08132007
Aug 25 12:39:31 boogie.lpds.sztaki.hu [ 39.100880] RPC: Registered udp transport module.
Aug 25 12:39:31 boogie.lpds.sztaki.hu [ 39.101017] RPC: Registered tcp transport module.
Aug 25 12:39:31 boogie.lpds.sztaki.hu [ 39.403834] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Aug 25 12:39:31 boogie.lpds.sztaki.hu [ 39.533517] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
Aug 25 12:39:31 boogie.lpds.sztaki.hu [ 39.537707] NFSD: starting 90-second grace period
Aug 25 12:39:38 boogie.lpds.sztaki.hu [ 47.400120] device mobo entered promiscuous mode
Aug 25 12:39:38 boogie.lpds.sztaki.hu [ 47.412247] device mobo left promiscuous mode
Aug 25 12:39:38 boogie.lpds.sztaki.hu [ 47.424122] device mobo entered promiscuous mode
Aug 25 12:39:47 boogie.lpds.sztaki.hu [ 55.759765] ttyS1: LSR safety check engaged!
Aug 25 12:39:47 boogie.lpds.sztaki.hu [ 56.355965] Bluetooth: Core ver 2.11
Aug 25 12:39:47 boogie.lpds.sztaki.hu [ 56.355965] NET: Registered protocol family 31
Aug 25 12:39:47 boogie.lpds.sztaki.hu [ 56.355965] Bluetooth: HCI device and connection manager initialized
Aug 25 12:39:47 boogie.lpds.sztaki.hu [ 56.355965] Bluetooth: HCI socket layer initialized
Aug 25 12:39:47 boogie.lpds.sztaki.hu [ 56.460880] Bluetooth: L2CAP ver 2.9
Aug 25 12:39:47 boogie.lpds.sztaki.hu [ 56.460880] Bluetooth: L2CAP socket layer initialized
Aug 25 12:39:47 boogie.lpds.sztaki.hu [ 56.484836] Bluetooth: RFCOMM socket layer initialized
Aug 25 12:39:47 boogie.lpds.sztaki.hu [ 56.484854] Bluetooth: RFCOMM TTY layer initialized
Aug 25 12:39:47 boogie.lpds.sztaki.hu [ 56.484963] Bluetooth: RFCOMM ver 1.8
Aug 25 12:39:52 boogie.lpds.sztaki.hu [ 61.290703] [drm] Initialized drm 1.1.0 20060810
Aug 25 12:39:52 boogie.lpds.sztaki.hu [ 61.335183] ACPI: PCI Interrupt 0000:00:02.0[A] ->
Aug 25 12:39:52 boogie.lpds.sztaki.hu GSI 16 (level, low) -> IRQ 16
Aug 25 12:39:52 boogie.lpds.sztaki.hu [ 61.335183] [drm] Initialized i915 1.6.0 20060119 on minor 0
Aug 25 12:39:53 boogie.lpds.sztaki.hu [ 61.762045] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
Aug 25 12:51:20 boogie.lpds.sztaki.hu [ 766.839697] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
Aug 25 13:05:33 boogie.lpds.sztaki.hu [ 1620.458335] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
Aug 25 13:09:00 boogie.lpds.sztaki.hu [ 1830.763249] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
Aug 25 13:33:56 boogie.lpds.sztaki.hu [ 3380.740565] NMI Watchdog detected LOCKUP on CPU 0
Aug 25 13:33:56 boogie.lpds.sztaki.hu [ 3380.740565] CPU 0
Aug 25 13:33:56 boogie.lpds.sztaki.hu
Aug 25 13:33:56 boogie.lpds.sztaki.hu [ 3380.740565] Modules linked in:
Aug 25 13:33:56 boogie.lpds.sztaki.hu i915
Aug 25 13:33:56 boogie.lpds.sztaki.hu drm
Aug 25 13:33:56 boogie.lpds.sztaki.hu rfcomm
Aug 25 13:33:56 boogie.lpds.sztaki.hu l2cap
Aug 25 13:33:56 boogie.lpds.sztaki.hu bluetooth
Aug 25 13:33:56 boogie.lpds.sztaki.hu nfsd
Aug 25 13:33:56 boogie.lpds.sztaki.hu lockd
Aug 25 13:33:56 boogie.lpds.sztaki.hu nfs_acl
Aug 25 13:33:56 boogie.lpds.sztaki.hu auth_rpcgss
Aug 25 13:33:56 boogie.lpds.sztaki.hu sunrpc
Aug 25 13:33:56 boogie.lpds.sztaki.hu exportfs
Aug 25 13:33:56 boogie.lpds.sztaki.hu microcode
Aug 25 13:33:56 boogie.lpds.sztaki.hu ipt_REJECT
Aug 25 13:33:56 boogie.lpds.sztaki.hu nf_conntrack_ipv4
Aug 25 13:33:56 boogie.lpds.sztaki.hu xt_state
Aug 25 13:33:56 boogie.lpds.sztaki.hu nf_conntrack
Aug 25 13:33:56 boogie.lpds.sztaki.hu xt_tcpudp
Aug 25 13:33:56 boogie.lpds.sztaki.hu ipt_LOG
Aug 25 13:33:56 boogie.lpds.sztaki.hu xt_limit
Aug 25 13:33:56 boogie.lpds.sztaki.hu iptable_filter
Aug 25 13:33:56 boogie.lpds.sztaki.hu ip_tables
Aug 25 13:33:56 boogie.lpds.sztaki.hu x_tables
Aug 25 13:33:56 boogie.lpds.sztaki.hu fuse
Aug 25 13:33:56 boogie.lpds.sztaki.hu dm_crypt
Aug 25 13:33:56 boogie.lpds.sztaki.hu crypto_blkcipher
Aug 25 13:33:56 boogie.lpds.sztaki.hu dm_mod
Aug 25 13:33:56 boogie.lpds.sztaki.hu netconsole
Aug 25 13:33:56 boogie.lpds.sztaki.hu configfs
Aug 25 13:33:56 boogie.lpds.sztaki.hu coretemp
Aug 25 13:33:56 boogie.lpds.sztaki.hu w83627ehf
Aug 25 13:33:56 boogie.lpds.sztaki.hu hwmon_vid
Aug 25 13:33:56 boogie.lpds.sztaki.hu sg
Aug 25 13:33:56 boogie.lpds.sztaki.hu snd_hda_intel
Aug 25 13:33:56 boogie.lpds.sztaki.hu snd_pcm
Aug 25 13:33:56 boogie.lpds.sztaki.hu sr_mod
Aug 25 13:33:56 boogie.lpds.sztaki.hu video
Aug 25 13:33:56 boogie.lpds.sztaki.hu snd_timer
Aug 25 13:33:56 boogie.lpds.sztaki.hu r8169
Aug 25 13:33:56 boogie.lpds.sztaki.hu 8139too
Aug 25 13:33:56 boogie.lpds.sztaki.hu cdrom
Aug 25 13:33:56 boogie.lpds.sztaki.hu iTCO_wdt
Aug 25 13:33:56 boogie.lpds.sztaki.hu 8250_pnp
Aug 25 13:33:56 boogie.lpds.sztaki.hu 8250
Aug 25 13:33:56 boogie.lpds.sztaki.hu serial_core
Aug 25 13:33:56 boogie.lpds.sztaki.hu i2c_i801
Aug 25 13:33:56 boogie.lpds.sztaki.hu snd
Aug 25 13:33:56 boogie.lpds.sztaki.hu floppy
Aug 25 13:33:56 boogie.lpds.sztaki.hu snd_page_alloc
Aug 25 13:33:56 boogie.lpds.sztaki.hu
Aug 25 13:33:56 boogie.lpds.sztaki.hu [ 3380.740565] Pid: 0, comm: swapper Not tainted 2.6.26.3 #18
Aug 25 13:33:56 boogie.lpds.sztaki.hu [ 3380.740565] RIP: 0010:[<ffffffff804d1fd5>]
Aug 25 13:33:56 boogie.lpds.sztaki.hu [<ffffffff804d1fd5>] _spin_lock+0xe/0x1a
Aug 25 13:33:56 boogie.lpds.sztaki.hu [ 3380.740565] RSP: 0018:ffffffff80685e08 EFLAGS: 00000297
Aug 25 13:33:56 boogie.lpds.sztaki.hu [ 3380.740565] RAX: 0000000000004b4a RBX: ffff81012fceb00c RCX: ffff81012fceb000
Aug 25 13:33:56 boogie.lpds.sztaki.hu [ 3380.740565] RDX: 0000000000000000 RSI: ffff81012fceb00c RDI: ffffffff807154e0
Aug 25 13:33:56 boogie.lpds.sztaki.hu [ 3380.740565] RBP: ffffffff80685e08 R08: 0000000000000000 R09: 000000000002149c
Aug 25 13:33:56 boogie.lpds.sztaki.hu [ 3380.740565] R10: ffff81012ca7ba40 R11: ffff81012ca7bbe8 R12: 0000000000000005
Aug 25 13:33:56 boogie.lpds.sztaki.hu [ 3380.740565] R13: 0000000000c86e1d R14: ffff81012fceb530 R15: ffff81012fceb000
Aug 25 13:33:56 boogie.lpds.sztaki.hu [ 3380.740565] FS: 0000000000000000(0000) GS:ffffffff8066d000(0000) knlGS:0000000000000000
Aug 25 13:33:56 boogie.lpds.sztaki.hu [ 3380.740565] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
Aug 25 13:33:56 boogie.lpds.sztaki.hu [ 3380.740565] CR2: 00000000f7f2a000 CR3: 0000000000201000 CR4: 00000000000006e0
Aug 25 13:34:01 boogie.lpds.sztaki.hu [ 3380.743087] NMI Watchdog detected LOCKUP on CPU 1
Aug 25 13:34:01 boogie.lpds.sztaki.hu [ 3380.743087] CPU 1
Aug 25 13:34:01 boogie.lpds.sztaki.hu
Aug 25 13:34:01 boogie.lpds.sztaki.hu [ 3380.743087] Modules linked in:
Aug 25 13:34:01 boogie.lpds.sztaki.hu i915
Aug 25 13:34:01 boogie.lpds.sztaki.hu drm
Aug 25 13:34:01 boogie.lpds.sztaki.hu rfcomm
Aug 25 13:34:01 boogie.lpds.sztaki.hu l2cap
Aug 25 13:34:01 boogie.lpds.sztaki.hu bluetooth
Aug 25 13:34:01 boogie.lpds.sztaki.hu nfsd
Aug 25 13:34:01 boogie.lpds.sztaki.hu lockd
Aug 25 13:34:01 boogie.lpds.sztaki.hu nfs_acl
Aug 25 13:34:01 boogie.lpds.sztaki.hu auth_rpcgss
Aug 25 13:34:01 boogie.lpds.sztaki.hu sunrpc
Aug 25 13:34:01 boogie.lpds.sztaki.hu exportfs
Aug 25 13:34:01 boogie.lpds.sztaki.hu microcode
Aug 25 13:34:01 boogie.lpds.sztaki.hu ipt_REJECT
Aug 25 13:34:01 boogie.lpds.sztaki.hu nf_conntrack_ipv4
Aug 25 13:34:01 boogie.lpds.sztaki.hu xt_state
Aug 25 13:34:01 boogie.lpds.sztaki.hu nf_conntrack
Aug 25 13:34:01 boogie.lpds.sztaki.hu xt_tcpudp
Aug 25 13:34:01 boogie.lpds.sztaki.hu ipt_LOG
Aug 25 13:34:01 boogie.lpds.sztaki.hu xt_limit
Aug 25 13:34:01 boogie.lpds.sztaki.hu iptable_filter
Aug 25 13:34:01 boogie.lpds.sztaki.hu ip_tables
Aug 25 13:34:01 boogie.lpds.sztaki.hu x_tables
Aug 25 13:34:01 boogie.lpds.sztaki.hu fuse
Aug 25 13:34:01 boogie.lpds.sztaki.hu dm_crypt
Aug 25 13:34:01 boogie.lpds.sztaki.hu crypto_blkcipher
Aug 25 13:34:01 boogie.lpds.sztaki.hu dm_mod
Aug 25 13:34:01 boogie.lpds.sztaki.hu netconsole
Aug 25 13:34:01 boogie.lpds.sztaki.hu configfs
Aug 25 13:34:01 boogie.lpds.sztaki.hu coretemp
Aug 25 13:34:01 boogie.lpds.sztaki.hu w83627ehf
Aug 25 13:34:01 boogie.lpds.sztaki.hu hwmon_vid
Aug 25 13:34:01 boogie.lpds.sztaki.hu sg
Aug 25 13:34:01 boogie.lpds.sztaki.hu snd_hda_intel
Aug 25 13:34:01 boogie.lpds.sztaki.hu snd_pcm
Aug 25 13:34:01 boogie.lpds.sztaki.hu sr_mod
Aug 25 13:34:01 boogie.lpds.sztaki.hu video
Aug 25 13:34:01 boogie.lpds.sztaki.hu snd_timer
Aug 25 13:34:01 boogie.lpds.sztaki.hu r8169
Aug 25 13:34:01 boogie.lpds.sztaki.hu 8139too
Aug 25 13:34:01 boogie.lpds.sztaki.hu cdrom
Aug 25 13:34:01 boogie.lpds.sztaki.hu iTCO_wdt
Aug 25 13:34:01 boogie.lpds.sztaki.hu 8250_pnp
Aug 25 13:34:01 boogie.lpds.sztaki.hu 8250
Aug 25 13:34:01 boogie.lpds.sztaki.hu serial_core
Aug 25 13:34:01 boogie.lpds.sztaki.hu i2c_i801
Aug 25 13:34:01 boogie.lpds.sztaki.hu snd
Aug 25 13:34:01 boogie.lpds.sztaki.hu floppy
Aug 25 13:34:01 boogie.lpds.sztaki.hu snd_page_alloc
Aug 25 13:34:01 boogie.lpds.sztaki.hu
Aug 25 13:34:01 boogie.lpds.sztaki.hu [ 3380.743087] Pid: 0, comm: swapper Not tainted 2.6.26.3 #18
Aug 25 13:34:01 boogie.lpds.sztaki.hu [ 3380.743087] RIP: 0010:[<ffffffff8021cc9f>]
Aug 25 13:34:01 boogie.lpds.sztaki.hu [<ffffffff8021cc9f>] hpet_rtc_interrupt+0x120/0x2f3
Aug 25 13:34:01 boogie.lpds.sztaki.hu [ 3380.743087] RSP: 0018:ffff81012fc97eb8 EFLAGS: 00000097
Aug 25 13:34:01 boogie.lpds.sztaki.hu [ 3380.743087] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
Aug 25 13:34:01 boogie.lpds.sztaki.hu [ 3380.743087] RDX: 00000000fde664e5 RSI: 0000000000000002 RDI: 0000000000000002
Aug 25 13:34:01 boogie.lpds.sztaki.hu [ 3380.743087] RBP: ffff81012fc97f18 R08: ffffffffff5fc128 R09: 0000000000000000
Aug 25 13:34:01 boogie.lpds.sztaki.hu [ 3380.743087] R10: ffff81000100bbd0 R11: 0100000000000292 R12: 00000000000000a6
Aug 25 13:34:01 boogie.lpds.sztaki.hu [ 3380.743087] R13: 00000001000b6f07 R14: ffff81012f140c00 R15: 0000000000000005
Aug 25 13:34:01 boogie.lpds.sztaki.hu [ 3380.743087] FS: 0000000000000000(0000) GS:ffff81012fc06580(0000) knlGS:0000000000000000
Aug 25 13:34:01 boogie.lpds.sztaki.hu [ 3380.743087] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
Aug 25 13:34:01 boogie.lpds.sztaki.hu [ 3380.743087] CR2: 00000000f7f58000 CR3: 0000000000201000 CR4: 00000000000006e0
Aug 25 13:34:01 boogie.lpds.sztaki.hu [ 3380.743087] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
Aug 25 13:34:01 boogie.lpds.sztaki.hu [ 3380.743087] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Aug 25 13:34:01 boogie.lpds.sztaki.hu [ 3380.743087] [<ffffffff8020e6d0>] do_IRQ+0xf7/0x169
Aug 25 13:34:01 boogie.lpds.sztaki.hu [ 3380.743087] [<ffffffff8036e46f>] ? acpi_hw_low_level_read+0x36/0x60
Aug 25 13:34:01 boogie.lpds.sztaki.hu [ 3380.743087] [<ffffffff80248f7b>] ? notifier_call_chain+0x33/0x5b
Aug 25 13:34:01 boogie.lpds.sztaki.hu [ 3380.743087] [<ffffffff80249037>] ? raw_notifier_call_chain+0xf/0x11
Aug 25 13:34:01 boogie.lpds.sztaki.hu [ 3380.743087] [<ffffffff8024cdb4>] ? clockevents_notify+0x2b/0x74
Aug 25 13:34:01 boogie.lpds.sztaki.hu [ 3380.743087] [<ffffffff804222b2>] ? menu_select+0x6f/0x8f
Aug 25 13:34:01 boogie.lpds.sztaki.hu [ 3380.743087] [<ffffffff8042123d>] ? cpuidle_idle_call+0x8d/0xc1
--
---------------------------------------------------------
MTA SZTAKI Computer and Automation Research Institute
Hungarian Academy of Sciences
---------------------------------------------------------
^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2008-08-25 12:23 UTC | newest]
Thread overview: 21+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-04-28 14:29 Solid freezes with 2.6.25 Gabor Gombas
2008-04-28 14:54 ` Oliver Pinter
2008-04-28 14:59 ` Gabor Gombas
2008-04-28 16:25 ` Andrew Morton
2008-04-29 9:50 ` Bernhard Walle
2008-04-29 9:53 ` Gabor Gombas
2008-04-29 15:54 ` Bernhard Walle
2008-04-30 13:38 ` Gabor Gombas
2008-04-30 14:51 ` Bernhard Walle
2008-05-07 11:43 ` Gabor Gombas
2008-05-07 12:45 ` Bernhard Walle
2008-05-07 13:42 ` Gabor Gombas
2008-05-12 12:21 ` Bernhard Walle
2008-05-13 14:39 ` Gabor Gombas
2008-06-15 17:11 ` Gabor Gombas
2008-07-25 8:52 ` Gabor Gombas
2008-07-25 9:04 ` Bernhard Walle
2008-08-25 12:27 ` Gabor Gombas
2008-04-29 7:24 ` Gabor Gombas
2008-04-29 7:37 ` Andrew Morton
2008-04-29 9:43 ` Gabor Gombas
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox