public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Mike Anderson <andmike@linux.vnet.ibm.com>
To: Jens Axboe <jens.axboe@oracle.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>,
	linux-kernel@vger.kernel.org,
	Alasdair Graeme Kergon <agk@redhat.com>
Subject: Re: [PATCH] Optimize lock in queue unplugging
Date: Tue, 29 Apr 2008 13:29:28 -0700	[thread overview]
Message-ID: <20080429202928.GB10641@linux.vnet.ibm.com> (raw)
In-Reply-To: <20080429192556.GB12774@kernel.dk>

Jens Axboe <jens.axboe@oracle.com> wrote:
> On Tue, Apr 29 2008, Mikulas Patocka wrote:
> > Hi
> > 
> > Mike Anderson was doing an OLTP benchmark on a computer with 48 physical 
> > disks mapped to one logical device via device mapper.
> > 
> > He found that there was a slowdown on request_queue->lock in function 
> > generic_unplug_device. The slowdown is caused by the fact that when some 
> > code calls unplug on the device mapper, device mapper calls unplug on all 
> > physical disks. These unplug calls take the lock, find that the queue is 
> > already unplugged, release the lock and exit.
> > 
> > With the below patch, performance of the benchmark was increased by 18% 
> > (the whole OLTP application, not just block layer microbenchmarks).
> > 
> > So I'm submitting this patch for upstream. I think the patch is correct, 
> > because when more threads call simultaneously plug and unplug, it is 
> > unspecified, if the queue is or isn't plugged (so the patch can't make 
> > this worse). And the caller that plugged the queue should unplug it 
> > anyway. (if it doesn't, there's 3ms timeout).
> 
> Where were these unplug calls coming from? The block layer will
> generally only unplug when it is already unplugged, so if you are seeing
> so many unplug calls that the patch redues overhead by as much
> described, perhaps the callsite is buggy?

I do not have direct access the the benchmark setup, but here is the data
I have received.

The oprofile data was showing ll_rw_blk::generic_unplug_device() as a top
routine at 13% of the samples. Annotation of the samples shows hits on
spin_lock_irq(q->queue_lock).

Here are some sample call traces:

Call trace #1

kernel:  [<ffffffff80058c6c>] generic_unplug_device+0x5d/0xc6
kernel:  [<ffffffff8820ea3e>] :dm_mod:dm_table_unplug_all+0x33/0x41
kernel:  [<ffffffff8820cc85>] :dm_mod:dm_unplug_all+0x1d/0x28
kernel:  [<ffffffff8005a78a>] blk_backing_dev_unplug+0x56/0x5b
kernel:  [<ffffffff80014cdc>] sync_buffer+0x36/0x3f
kernel:  [<ffffffff800629a4>] __wait_on_bit+0x40/0x6f
kernel:  [<ffffffff80014ca6>] sync_buffer+0x0/0x3f
kernel:  [<ffffffff80062a3f>] out_of_line_wait_on_bit+0x6c/0x78
kernel:  [<ffffffff8009c474>] wake_bit_function+0x0/0x23
kernel:  [<ffffffff88034c85>] :jbd:journal_commit_transaction+0x91f/0x1086
kernel:  [<ffffffff8003d038>] lock_timer_base+0x1b/0x3c
kernel:  [<ffffffff8803840e>] :jbd:kjournald+0xc1/0x213
kernel:  [<ffffffff8009c446>] autoremove_wake_function+0x0/0x2e
kernel:  [<ffffffff8009c283>] keventd_create_kthread+0x0/0x61
kernel:  [<ffffffff8803834d>] :jbd:kjournald+0x0/0x213
kernel:  [<ffffffff8009c283>] keventd_create_kthread+0x0/0x61
kernel:  [<ffffffff800321d5>] kthread+0xfe/0x132
kernel:  [<ffffffff8005cfb1>] child_rip+0xa/0x11
kernel:  [<ffffffff8009c283>] keventd_create_kthread+0x0/0x61
kernel:  [<ffffffff800320d7>] kthread+0x0/0x132
kernel:  [<ffffffff8005cfa7>] child_rip+0x0/0x11                       

Call trace #2
kernel:  [<ffffffff80058c6c>] generic_unplug_device+0x5d/0xc6
kernel:  [<ffffffff8820ea3e>] :dm_mod:dm_table_unplug_all+0x33/0x41
kernel:  [<ffffffff8820cc85>] :dm_mod:dm_unplug_all+0x1d/0x28
kernel:  [<ffffffff8005a78a>] blk_backing_dev_unplug+0x56/0x5b
kernel:  [<ffffffff800e8bfe>] __blockdev_direct_IO+0x889/0xaa2
kernel:  [<ffffffff88050800>] :ext3:ext3_direct_IO+0xf3/0x18b
kernel:  [<ffffffff8804ec84>] :ext3:ext3_get_block+0x0/0xe3
kernel:  [<ffffffff800be6bb>] generic_file_direct_IO+0xbd/0xfb
kernel:  [<ffffffff8001e637>] generic_file_direct_write+0x60/0xf2
kernel:  [<ffffffff80015cfd>] __generic_file_aio_write_nolock+0x2b7/0x3b8
kernel:  [<ffffffff8002134f>] generic_file_aio_write+0x65/0xc1
kernel:  [<ffffffff8804c192>] :ext3:ext3_file_write+0x16/0x91
kernel:  [<ffffffff80017944>] do_sync_write+0xc7/0x104
kernel:  [<ffffffff8009c446>] autoremove_wake_function+0x0/0x2e
kernel:  [<ffffffff80111400>] free_msg+0x22/0x3c
kernel:  [<ffffffff800161c4>] vfs_write+0xce/0x174
kernel:  [<ffffffff8004194c>] sys_pwrite64+0x50/0x70
kernel:  [<ffffffff8005cde9>] error_exit+0x0/0x84
kernel:  [<ffffffff8005c116>] system_call+0x7e/0x83

-andmike
--
Michael Anderson
andmike@linux.vnet.ibm.com

  parent reply	other threads:[~2008-04-29 20:29 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-04-29 19:12 [PATCH] Optimize lock in queue unplugging Mikulas Patocka
2008-04-29 19:25 ` Jens Axboe
2008-04-29 20:02   ` Mikulas Patocka
2008-04-29 20:05     ` Jens Axboe
2008-04-29 20:29   ` Mike Anderson [this message]
2008-04-30  7:14     ` Jens Axboe
2008-04-30 10:38       ` Alasdair G Kergon
2008-04-30 13:54       ` Mikulas Patocka
2008-05-04 19:11         ` Jens Axboe
2008-05-05  4:01           ` Mikulas Patocka
2008-05-07  7:45             ` Jens Axboe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080429202928.GB10641@linux.vnet.ibm.com \
    --to=andmike@linux.vnet.ibm.com \
    --cc=agk@redhat.com \
    --cc=jens.axboe@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mpatocka@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox