[patch 37/37] md: fix raid5 repair operations

[Greg KH <gregkh@suse.de>]

[-- Attachment #1: md-fix-raid5-repair-operations.patch --]
[-- Type: text/plain, Size: 3263 bytes --]

2.6.25-stable review patch.  If anyone has any objections, please let us
know.

------------------
From: Dan Williams <dan.j.williams@intel.com>

commit c8894419acf5e56851de9741c5047bebd78acd1f upstream
Date: Mon, 12 May 2008 14:02:12 -0700
Subject: [patch 37/37] md: fix raid5 'repair' operations

commit bd2ab67030e9116f1e4aae1289220255412b37fd "md: close a livelock window
in handle_parity_checks5" introduced a bug in handling 'repair' operations.
After a repair operation completes we clear the state bits tracking this
operation.  However, they are cleared too early and this results in the code
deciding to re-run the parity check operation.  Since we have done the repair
in memory the second check does not find a mismatch and thus does not do a
writeback.

Test results:
$ echo repair > /sys/block/md0/md/sync_action
$ cat /sys/block/md0/md/mismatch_cnt
51072
$ echo repair > /sys/block/md0/md/sync_action
$ cat /sys/block/md0/md/mismatch_cnt
0

(also fix incorrect indentation)

Tested-by: George Spelvin <linux@horizon.com>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/md/raid5.c |   25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2354,8 +2354,8 @@ static void handle_parity_checks5(raid5_
 
 	/* complete a check operation */
 	if (test_and_clear_bit(STRIPE_OP_CHECK, &sh->ops.complete)) {
-	    clear_bit(STRIPE_OP_CHECK, &sh->ops.ack);
-	    clear_bit(STRIPE_OP_CHECK, &sh->ops.pending);
+		clear_bit(STRIPE_OP_CHECK, &sh->ops.ack);
+		clear_bit(STRIPE_OP_CHECK, &sh->ops.pending);
 		if (s->failed == 0) {
 			if (sh->ops.zero_sum_result == 0)
 				/* parity is correct (on disc,
@@ -2385,16 +2385,6 @@ static void handle_parity_checks5(raid5_
 			canceled_check = 1; /* STRIPE_INSYNC is not set */
 	}
 
-	/* check if we can clear a parity disk reconstruct */
-	if (test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete) &&
-		test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) {
-
-		clear_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending);
-		clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete);
-		clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.ack);
-		clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending);
-	}
-
 	/* start a new check operation if there are no failures, the stripe is
 	 * not insync, and a repair is not in flight
 	 */
@@ -2409,6 +2399,17 @@ static void handle_parity_checks5(raid5_
 		}
 	}
 
+	/* check if we can clear a parity disk reconstruct */
+	if (test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete) &&
+	    test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) {
+
+		clear_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending);
+		clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete);
+		clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.ack);
+		clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending);
+	}
+
+
 	/* Wait for check parity and compute block operations to complete
 	 * before write-back.  If a failure occurred while the check operation
 	 * was in flight we need to cycle this stripe through handle_stripe

--