From: Alan Cox <alan@lxorguk.ukuu.org.uk>
To: akpm@osdl.org, linux-kernel@vger.kernel.org, wim@iguana.be
Subject: [PATCH 06/57] at91: watchdog to unlocked_ioctl
Date: Mon, 19 May 2008 14:05:19 +0100 [thread overview]
Message-ID: <20080519130519.31722.15841.stgit@core> (raw)
In-Reply-To: <20080519124659.31722.51847.stgit@core>
From: Alan Cox <alan@redhat.com>
Review and switch to unlocked_ioctl
---
drivers/watchdog/at91rm9200_wdt.c | 108 +++++++++++++++++++------------------
1 files changed, 54 insertions(+), 54 deletions(-)
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index 9ff9a95..bb79f64 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -20,7 +20,7 @@
#include <linux/platform_device.h>
#include <linux/types.h>
#include <linux/watchdog.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include <asm/arch/at91_st.h>
@@ -31,11 +31,14 @@ static int wdt_time = WDT_DEFAULT_TIME;
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(wdt_time, int, 0);
-MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="__MODULE_STRING(WDT_DEFAULT_TIME) ")");
+MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="
+ __MODULE_STRING(WDT_DEFAULT_TIME) ")");
#ifdef CONFIG_WATCHDOG_NOWAYOUT
module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+ "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
#endif
@@ -46,7 +49,7 @@ static unsigned long at91wdt_busy;
/*
* Disable the watchdog.
*/
-static void inline at91_wdt_stop(void)
+static inline void at91_wdt_stop(void)
{
at91_sys_write(AT91_ST_WDMR, AT91_ST_EXTEN);
}
@@ -54,16 +57,17 @@ static void inline at91_wdt_stop(void)
/*
* Enable and reset the watchdog.
*/
-static void inline at91_wdt_start(void)
+static inline void at91_wdt_start(void)
{
- at91_sys_write(AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN | (((65536 * wdt_time) >> 8) & AT91_ST_WDV));
+ at91_sys_write(AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN |
+ (((65536 * wdt_time) >> 8) & AT91_ST_WDV));
at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
}
/*
* Reload the watchdog timer. (ie, pat the watchdog)
*/
-static void inline at91_wdt_reload(void)
+static inline void at91_wdt_reload(void)
{
at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
}
@@ -89,8 +93,9 @@ static int at91_wdt_open(struct inode *inode, struct file *file)
*/
static int at91_wdt_close(struct inode *inode, struct file *file)
{
+ /* Disable the watchdog when file is closed */
if (!nowayout)
- at91_wdt_stop(); /* Disable the watchdog when file is closed */
+ at91_wdt_stop();
clear_bit(0, &at91wdt_busy);
return 0;
@@ -110,7 +115,8 @@ static int at91_wdt_settimeout(int new_time)
if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
return -EINVAL;
- /* Set new watchdog time. It will be used when at91_wdt_start() is called. */
+ /* Set new watchdog time. It will be used when
+ at91_wdt_start() is called. */
wdt_time = new_time;
return 0;
}
@@ -123,60 +129,52 @@ static struct watchdog_info at91_wdt_info = {
/*
* Handle commands from user-space.
*/
-static int at91_wdt_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long at91_wdt_ioct(struct file *file,
+ unsigned int cmd, unsigned long arg)
{
void __user *argp = (void __user *)arg;
int __user *p = argp;
int new_value;
- switch(cmd) {
- case WDIOC_KEEPALIVE:
- at91_wdt_reload(); /* pat the watchdog */
- return 0;
-
- case WDIOC_GETSUPPORT:
- return copy_to_user(argp, &at91_wdt_info, sizeof(at91_wdt_info)) ? -EFAULT : 0;
-
- case WDIOC_SETTIMEOUT:
- if (get_user(new_value, p))
- return -EFAULT;
-
- if (at91_wdt_settimeout(new_value))
- return -EINVAL;
-
- /* Enable new time value */
+ switch (cmd) {
+ case WDIOC_KEEPALIVE:
+ at91_wdt_reload(); /* pat the watchdog */
+ return 0;
+ case WDIOC_GETSUPPORT:
+ return copy_to_user(argp, &at91_wdt_info,
+ sizeof(at91_wdt_info)) ? -EFAULT : 0;
+ case WDIOC_SETTIMEOUT:
+ if (get_user(new_value, p))
+ return -EFAULT;
+ if (at91_wdt_settimeout(new_value))
+ return -EINVAL;
+ /* Enable new time value */
+ at91_wdt_start();
+ /* Return current value */
+ return put_user(wdt_time, p);
+ case WDIOC_GETTIMEOUT:
+ return put_user(wdt_time, p);
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, p);
+ case WDIOC_SETOPTIONS:
+ if (get_user(new_value, p))
+ return -EFAULT;
+ if (new_value & WDIOS_DISABLECARD)
+ at91_wdt_stop();
+ if (new_value & WDIOS_ENABLECARD)
at91_wdt_start();
-
- /* Return current value */
- return put_user(wdt_time, p);
-
- case WDIOC_GETTIMEOUT:
- return put_user(wdt_time, p);
-
- case WDIOC_GETSTATUS:
- case WDIOC_GETBOOTSTATUS:
- return put_user(0, p);
-
- case WDIOC_SETOPTIONS:
- if (get_user(new_value, p))
- return -EFAULT;
-
- if (new_value & WDIOS_DISABLECARD)
- at91_wdt_stop();
- if (new_value & WDIOS_ENABLECARD)
- at91_wdt_start();
- return 0;
-
- default:
- return -ENOTTY;
+ return 0;
+ default:
+ return -ENOTTY;
}
}
/*
* Pat the watchdog whenever device is written to.
*/
-static ssize_t at91_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
+static ssize_t at91_wdt_write(struct file *file, const char *data,
+ size_t len, loff_t *ppos)
{
at91_wdt_reload(); /* pat the watchdog */
return len;
@@ -187,7 +185,7 @@ static ssize_t at91_wdt_write(struct file *file, const char *data, size_t len, l
static const struct file_operations at91wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
- .ioctl = at91_wdt_ioctl,
+ .unlocked_ioctl = at91_wdt_ioctl,
.open = at91_wdt_open,
.release = at91_wdt_close,
.write = at91_wdt_write,
@@ -211,7 +209,8 @@ static int __init at91wdt_probe(struct platform_device *pdev)
if (res)
return res;
- printk("AT91 Watchdog Timer enabled (%d seconds%s)\n", wdt_time, nowayout ? ", nowayout" : "");
+ printk(KERN_INFO "AT91 Watchdog Timer enabled (%d seconds%s)\n",
+ wdt_time, nowayout ? ", nowayout" : "");
return 0;
}
@@ -265,7 +264,8 @@ static struct platform_driver at91wdt_driver = {
static int __init at91_wdt_init(void)
{
- /* Check that the heartbeat value is within range; if not reset to the default */
+ /* Check that the heartbeat value is within range;
+ if not reset to the default */
if (at91_wdt_settimeout(wdt_time)) {
at91_wdt_settimeout(WDT_DEFAULT_TIME);
pr_info("at91_wdt: wdt_time value must be 1 <= wdt_time <= 256, using %d\n", wdt_time);
next prev parent reply other threads:[~2008-05-19 13:19 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-19 13:04 [PATCH 00/57] watchdog: Giant scrub Alan Cox
2008-05-19 13:04 ` [PATCH 01/57] Clean acquirewdt and check for BKL dependancies Alan Cox
2008-05-19 13:04 ` [PATCH 02/57] clean up and check advantech watchdog Alan Cox
2008-05-19 13:04 ` [PATCH 03/57] ali: watchdog locking and style Alan Cox
2008-05-19 13:05 ` [PATCH 04/57] AR7 watchdog Alan Cox
2008-05-19 13:05 ` [PATCH 05/57] atp watchdog Alan Cox
2008-05-19 13:05 ` Alan Cox [this message]
2008-05-19 13:05 ` [PATCH 07/57] cpu5_wdt: switch to unlocked_ioctl Alan Cox
2008-05-19 13:05 ` [PATCH 08/57] davinci_wdt: unlocked_ioctl and check locking Alan Cox
2008-05-19 13:05 ` [PATCH 09/57] ep93xx_wdt: unlocked_ioctl Alan Cox
2008-05-19 13:05 ` [PATCH 10/57] eurotechwdt: unlocked_ioctl, code lock check and tidy Alan Cox
2008-05-19 13:05 ` [PATCH 11/57] hpwdt: couple of include cleanups Alan Cox
2008-05-19 13:05 ` [PATCH 12/57] ib700wdt: clean up and switch to unlocked_ioctl Alan Cox
2008-05-19 13:05 ` [PATCH 13/57] i6300esb: Style, unlocked_ioctl, cleanup Alan Cox
2008-05-19 13:06 ` [PATCH 14/57] ibmasr: coding style, locking verify Alan Cox
2008-05-20 5:52 ` Andrey Panin
2008-05-19 13:06 ` [PATCH 15/57] indydog: Clean up and tidy Alan Cox
2008-05-19 13:06 ` [PATCH 16/57] iop: watchdog switch to unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 17/57] it8712f: unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 18/57] iTCO: unlocked_ioctl, coding style and cleanup Alan Cox
2008-05-20 8:26 ` Andrew Morton
2008-05-21 4:26 ` Rusty Russell
2008-05-21 4:36 ` Andrew Morton
2008-05-21 4:58 ` Rusty Russell
2008-05-21 9:29 ` Alan Cox
2008-05-22 5:56 ` Rusty Russell
2008-05-22 6:15 ` Andrew Morton
2008-05-19 13:06 ` [PATCH 19/57] bfin: watchdog cleanup and unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 20/57] booke watchdog: clean up " Alan Cox
2008-05-19 13:06 ` [PATCH 21/57] ixp2000_wdt: " Alan Cox
2008-05-19 13:06 ` [PATCH 22/57] ixp4xx_wdt: unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 23/57] ks8695_wdt: clean up, coding style, unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 24/57] machzwd: " Alan Cox
2008-05-19 13:07 ` [PATCH 25/57] mixcomwd: coding style locking, unlocked_ioctl Alan Cox
2008-05-19 13:07 ` [PATCH 26/57] mpc watchdog: clean up and locking Alan Cox
2008-05-19 13:07 ` [PATCH 27/57] mpcore watchdog: unlocked_ioctl and BKl work Alan Cox
2008-05-19 13:07 ` [PATCH 28/57] mtx-1_wdt: clean up, coding style, unlocked ioctl Alan Cox
2008-05-20 15:08 ` Florian Fainelli
2008-05-19 13:07 ` [PATCH 29/57] mv64x60_wdt: clean up and locking checks Alan Cox
2008-05-19 13:07 ` [PATCH 30/57] omap_wdt: locking, unlocked_ioctl, tidy Alan Cox
2008-05-19 13:07 ` [PATCH 31/57] pc87413_wdt: clean up, coding style, unlocked_ioctl Alan Cox
2008-05-19 13:07 ` [PATCH 32/57] pcwd: clean up, unlocked_ioctl usage Alan Cox
2008-05-19 13:07 ` [PATCH 33/57] pnx4008_wdt: unlocked_ioctl setup Alan Cox
2008-05-19 13:07 ` [PATCH 34/57] rm9k_wdt: clean up Alan Cox
2008-05-19 13:08 ` [PATCH 35/57] s3c2410: watchdog cleanup and switch to unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 36/57] sa1100_wdt: Switch " Alan Cox
2008-05-19 13:08 ` [PATCH 37/57] sbc60xxwdt: clean up and switch " Alan Cox
2008-05-19 13:08 ` [PATCH 38/57] stg7240_wdt: unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 39/57] sbc8360: clean up Alan Cox
2008-05-19 13:08 ` [PATCH 40/57] sbc_epx_c3_wdt: switch to unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 41/57] sb_wdog: Clean up and " Alan Cox
2008-05-19 13:08 ` [PATCH 42/57] sc1200_wdt: clean up, fix locking and use unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 43/57] sc520_wdt: Clean up and switch to unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 44/57] scx200_wdt: clean " Alan Cox
2008-05-19 13:08 ` [PATCH 45/57] shwdt: coding style, cleanup, " Alan Cox
2008-05-19 13:09 ` [PATCH 46/57] smsc37b787_wdt: coding style, " Alan Cox
2008-05-19 13:09 ` [PATCH 47/57] softdog: clean up, coding style and " Alan Cox
2008-05-19 13:09 ` [PATCH 48/57] txx9: Fix locking, " Alan Cox
2008-05-19 13:09 ` [PATCH 49/57] w83627hf: coding style, clean up and " Alan Cox
2008-05-19 13:09 ` [PATCH 50/57] w83697hf_wdt: cleanup, coding style " Alan Cox
2008-05-19 13:09 ` [PATCH 51/57] w83877f_wdt: clean up code, coding style, " Alan Cox
2008-05-19 13:09 ` [PATCH 52/57] w83977f_wdt: clean up, coding style and " Alan Cox
2008-05-19 13:09 ` [PATCH 53/57] wafer5823wdt: Clean up, coding style, " Alan Cox
2008-05-19 13:09 ` [PATCH 54/57] wdrtas: clean " Alan Cox
2008-05-19 13:09 ` [PATCH 55/57] wdt285: switch to unlocked_ioctl and tidy up oddments of coding style Alan Cox
2008-05-19 13:09 ` [PATCH 56/57] wdt977: clean up, coding style and switch to unlocked_ioctl Alan Cox
2008-05-19 13:10 ` [PATCH 57/57] wdt501/pci: Clean " Alan Cox
2008-05-19 18:21 ` [PATCH 00/57] watchdog: Giant scrub Andrew Morton
2008-05-19 19:51 ` Alan Cox
2008-05-20 8:01 ` Wim Van Sebroeck
2008-05-20 8:37 ` Andrew Morton
2008-05-20 15:34 ` Wim Van Sebroeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080519130519.31722.15841.stgit@core \
--to=alan@lxorguk.ukuu.org.uk \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox