From: Alan Cox <alan@lxorguk.ukuu.org.uk>
To: akpm@osdl.org, linux-kernel@vger.kernel.org, wim@iguana.be
Subject: [PATCH 13/57] i6300esb: Style, unlocked_ioctl, cleanup
Date: Mon, 19 May 2008 14:05:57 +0100 [thread overview]
Message-ID: <20080519130557.31722.34852.stgit@core> (raw)
In-Reply-To: <20080519124659.31722.51847.stgit@core>
From: Alan Cox <alan@redhat.com>
---
drivers/watchdog/i6300esb.c | 342 +++++++++++++++++++++----------------------
1 files changed, 167 insertions(+), 175 deletions(-)
diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c
index ca44fd9..b7e1419 100644
--- a/drivers/watchdog/i6300esb.c
+++ b/drivers/watchdog/i6300esb.c
@@ -38,9 +38,8 @@
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/ioport.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
/* Module and version information */
#define ESB_VERSION "0.03"
@@ -59,17 +58,17 @@
#define ESB_RELOAD_REG BASEADDR + 0x0c /* Reload register */
/* Lock register bits */
-#define ESB_WDT_FUNC ( 0x01 << 2 ) /* Watchdog functionality */
-#define ESB_WDT_ENABLE ( 0x01 << 1 ) /* Enable WDT */
-#define ESB_WDT_LOCK ( 0x01 << 0 ) /* Lock (nowayout) */
+#define ESB_WDT_FUNC (0x01 << 2) /* Watchdog functionality */
+#define ESB_WDT_ENABLE (0x01 << 1) /* Enable WDT */
+#define ESB_WDT_LOCK (0x01 << 0) /* Lock (nowayout) */
/* Config register bits */
-#define ESB_WDT_REBOOT ( 0x01 << 5 ) /* Enable reboot on timeout */
-#define ESB_WDT_FREQ ( 0x01 << 2 ) /* Decrement frequency */
-#define ESB_WDT_INTTYPE ( 0x11 << 0 ) /* Interrupt type on timer1 timeout */
+#define ESB_WDT_REBOOT (0x01 << 5) /* Enable reboot on timeout */
+#define ESB_WDT_FREQ (0x01 << 2) /* Decrement frequency */
+#define ESB_WDT_INTTYPE (0x11 << 0) /* Interrupt type on timer1 timeout */
/* Reload register bits */
-#define ESB_WDT_RELOAD ( 0x01 << 8 ) /* prevent timeout */
+#define ESB_WDT_RELOAD (0x01 << 8) /* prevent timeout */
/* Magic constants */
#define ESB_UNLOCK1 0x80 /* Step 1 to unlock reset registers */
@@ -84,14 +83,20 @@ static unsigned short triggered; /* The status of the watchdog upon boot */
static char esb_expect_close;
/* module parameters */
-#define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat (1<heartbeat<2*1023) */
+/* 30 sec default heartbeat (1 < heartbeat < 2*1023) */
+#define WATCHDOG_HEARTBEAT 30
static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */
+
module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (1<heartbeat<2046, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
+MODULE_PARM_DESC(heartbeat,
+ "Watchdog heartbeat in seconds. (1<heartbeat<2046, default="
+ __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+ "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
/*
* Some i6300ESB specific functions
@@ -104,8 +109,8 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" _
* to once before they need to be unlocked again.
*/
static inline void esb_unlock_registers(void) {
- writeb(ESB_UNLOCK1, ESB_RELOAD_REG);
- writeb(ESB_UNLOCK2, ESB_RELOAD_REG);
+ writeb(ESB_UNLOCK1, ESB_RELOAD_REG);
+ writeb(ESB_UNLOCK2, ESB_RELOAD_REG);
}
static void esb_timer_start(void)
@@ -114,8 +119,7 @@ static void esb_timer_start(void)
/* Enable or Enable + Lock? */
val = 0x02 | (nowayout ? 0x01 : 0x00);
-
- pci_write_config_byte(esb_pci, ESB_LOCK_REG, val);
+ pci_write_config_byte(esb_pci, ESB_LOCK_REG, val);
}
static int esb_timer_stop(void)
@@ -140,7 +144,7 @@ static void esb_timer_keepalive(void)
spin_lock(&esb_lock);
esb_unlock_registers();
writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
- /* FIXME: Do we need to flush anything here? */
+ /* FIXME: Do we need to flush anything here? */
spin_unlock(&esb_lock);
}
@@ -167,7 +171,7 @@ static int esb_timer_set_heartbeat(int time)
esb_unlock_registers();
writel(val, ESB_TIMER2_REG);
- /* Reload */
+ /* Reload */
esb_unlock_registers();
writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
@@ -179,54 +183,55 @@ static int esb_timer_set_heartbeat(int time)
return 0;
}
-static int esb_timer_read (void)
+static int esb_timer_read(void)
{
- u32 count;
+ u32 count;
/* This isn't documented, and doesn't take into
- * acount which stage is running, but it looks
- * like a 20 bit count down, so we might as well report it.
- */
- pci_read_config_dword(esb_pci, 0x64, &count);
- return (int)count;
+ * acount which stage is running, but it looks
+ * like a 20 bit count down, so we might as well report it.
+ */
+ pci_read_config_dword(esb_pci, 0x64, &count);
+ return (int)count;
}
/*
* /dev/watchdog handling
*/
-static int esb_open (struct inode *inode, struct file *file)
+static int esb_open(struct inode *inode, struct file *file)
{
- /* /dev/watchdog can only be opened once */
- if (test_and_set_bit(0, &timer_alive))
- return -EBUSY;
+ /* /dev/watchdog can only be opened once */
+ if (test_and_set_bit(0, &timer_alive))
+ return -EBUSY;
- /* Reload and activate timer */
- esb_timer_keepalive ();
- esb_timer_start ();
+ /* Reload and activate timer */
+ esb_timer_keepalive();
+ esb_timer_start();
return nonseekable_open(inode, file);
}
-static int esb_release (struct inode *inode, struct file *file)
+static int esb_release(struct inode *inode, struct file *file)
{
- /* Shut off the timer. */
- if (esb_expect_close == 42) {
- esb_timer_stop ();
- } else {
- printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
- esb_timer_keepalive ();
- }
- clear_bit(0, &timer_alive);
- esb_expect_close = 0;
- return 0;
+ /* Shut off the timer. */
+ if (esb_expect_close == 42)
+ esb_timer_stop();
+ else {
+ printk(KERN_CRIT PFX
+ "Unexpected close, not stopping watchdog!\n");
+ esb_timer_keepalive();
+ }
+ clear_bit(0, &timer_alive);
+ esb_expect_close = 0;
+ return 0;
}
-static ssize_t esb_write (struct file *file, const char __user *data,
- size_t len, loff_t * ppos)
+static ssize_t esb_write(struct file *file, const char __user *data,
+ size_t len, loff_t *ppos)
{
/* See if we got the magic character 'V' and reload the timer */
- if (len) {
+ if (len) {
if (!nowayout) {
size_t i;
@@ -237,7 +242,7 @@ static ssize_t esb_write (struct file *file, const char __user *data,
/* scan to see whether or not we got the magic character */
for (i = 0; i != len; i++) {
char c;
- if(get_user(c, data+i))
+ if (get_user(c, data+i))
return -EFAULT;
if (c == 'V')
esb_expect_close = 42;
@@ -245,13 +250,12 @@ static ssize_t esb_write (struct file *file, const char __user *data,
}
/* someone wrote to us, we should reload the timer */
- esb_timer_keepalive ();
+ esb_timer_keepalive();
}
return len;
}
-static int esb_ioctl (struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long esb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
int new_options, retval = -EINVAL;
int new_heartbeat;
@@ -266,71 +270,65 @@ static int esb_ioctl (struct inode *inode, struct file *file,
};
switch (cmd) {
- case WDIOC_GETSUPPORT:
- return copy_to_user(argp, &ident,
- sizeof (ident)) ? -EFAULT : 0;
-
- case WDIOC_GETSTATUS:
- return put_user (esb_timer_read(), p);
-
- case WDIOC_GETBOOTSTATUS:
- return put_user (triggered, p);
-
- case WDIOC_KEEPALIVE:
- esb_timer_keepalive ();
- return 0;
+ case WDIOC_GETSUPPORT:
+ return copy_to_user(argp, &ident,
+ sizeof(ident)) ? -EFAULT : 0;
- case WDIOC_SETOPTIONS:
- {
- if (get_user (new_options, p))
- return -EFAULT;
+ case WDIOC_GETSTATUS:
+ return put_user(esb_timer_read(), p);
- if (new_options & WDIOS_DISABLECARD) {
- esb_timer_stop ();
- retval = 0;
- }
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(triggered, p);
- if (new_options & WDIOS_ENABLECARD) {
- esb_timer_keepalive ();
- esb_timer_start ();
- retval = 0;
- }
+ case WDIOC_KEEPALIVE:
+ esb_timer_keepalive();
+ return 0;
- return retval;
- }
+ case WDIOC_SETOPTIONS:
+ {
+ if (get_user(new_options, p))
+ return -EFAULT;
- case WDIOC_SETTIMEOUT:
- {
- if (get_user(new_heartbeat, p))
- return -EFAULT;
-
- if (esb_timer_set_heartbeat(new_heartbeat))
- return -EINVAL;
-
- esb_timer_keepalive ();
- /* Fall */
- }
-
- case WDIOC_GETTIMEOUT:
- return put_user(heartbeat, p);
+ if (new_options & WDIOS_DISABLECARD) {
+ esb_timer_stop();
+ retval = 0;
+ }
- default:
- return -ENOTTY;
- }
+ if (new_options & WDIOS_ENABLECARD) {
+ esb_timer_keepalive();
+ esb_timer_start();
+ retval = 0;
+ }
+ return retval;
+ }
+ case WDIOC_SETTIMEOUT:
+ {
+ if (get_user(new_heartbeat, p))
+ return -EFAULT;
+ if (esb_timer_set_heartbeat(new_heartbeat))
+ return -EINVAL;
+ esb_timer_keepalive();
+ /* Fall */
+ }
+ case WDIOC_GETTIMEOUT:
+ return put_user(heartbeat, p);
+ default:
+ return -ENOTTY;
+ }
}
/*
* Notify system
*/
-static int esb_notify_sys (struct notifier_block *this, unsigned long code, void *unused)
+static int esb_notify_sys(struct notifier_block *this,
+ unsigned long code, void *unused)
{
- if (code==SYS_DOWN || code==SYS_HALT) {
- /* Turn the WDT off */
- esb_timer_stop ();
- }
-
- return NOTIFY_DONE;
+ if (code == SYS_DOWN || code == SYS_HALT) {
+ /* Turn the WDT off */
+ esb_timer_stop();
+ }
+ return NOTIFY_DONE;
}
/*
@@ -338,22 +336,22 @@ static int esb_notify_sys (struct notifier_block *this, unsigned long code, void
*/
static const struct file_operations esb_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .write = esb_write,
- .ioctl = esb_ioctl,
- .open = esb_open,
- .release = esb_release,
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = esb_write,
+ .unlocked_ioctl = esb_ioctl,
+ .open = esb_open,
+ .release = esb_release,
};
static struct miscdevice esb_miscdev = {
- .minor = WATCHDOG_MINOR,
- .name = "watchdog",
- .fops = &esb_fops,
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &esb_fops,
};
static struct notifier_block esb_notifier = {
- .notifier_call = esb_notify_sys,
+ .notifier_call = esb_notify_sys,
};
/*
@@ -365,50 +363,44 @@ static struct notifier_block esb_notifier = {
* want to register another driver on the same PCI id.
*/
static struct pci_device_id esb_pci_tbl[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_9), },
- { 0, }, /* End of list */
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_9), },
+ { 0, }, /* End of list */
};
-MODULE_DEVICE_TABLE (pci, esb_pci_tbl);
+MODULE_DEVICE_TABLE(pci, esb_pci_tbl);
/*
* Init & exit routines
*/
-static unsigned char __init esb_getdevice (void)
+static unsigned char __init esb_getdevice(void)
{
u8 val1;
unsigned short val2;
+ /*
+ * Find the PCI device
+ */
- struct pci_dev *dev = NULL;
- /*
- * Find the PCI device
- */
-
- for_each_pci_dev(dev) {
- if (pci_match_id(esb_pci_tbl, dev)) {
- esb_pci = dev;
- break;
- }
- }
+ esb_pci = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_ESB_9, NULL);
- if (esb_pci) {
- if (pci_enable_device(esb_pci)) {
- printk (KERN_ERR PFX "failed to enable device\n");
+ if (esb_pci) {
+ if (pci_enable_device(esb_pci)) {
+ printk(KERN_ERR PFX "failed to enable device\n");
goto err_devput;
}
if (pci_request_region(esb_pci, 0, ESB_MODULE_NAME)) {
- printk (KERN_ERR PFX "failed to request region\n");
+ printk(KERN_ERR PFX "failed to request region\n");
goto err_disable;
}
BASEADDR = ioremap(pci_resource_start(esb_pci, 0),
pci_resource_len(esb_pci, 0));
if (BASEADDR == NULL) {
- /* Something's wrong here, BASEADDR has to be set */
- printk (KERN_ERR PFX "failed to get BASEADDR\n");
- goto err_release;
- }
+ /* Something's wrong here, BASEADDR has to be set */
+ printk(KERN_ERR PFX "failed to get BASEADDR\n");
+ goto err_release;
+ }
/*
* The watchdog has two timers, it can be setup so that the
@@ -425,7 +417,7 @@ static unsigned char __init esb_getdevice (void)
/* Check that the WDT isn't already locked */
pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val1);
if (val1 & ESB_WDT_LOCK)
- printk (KERN_WARNING PFX "nowayout already set\n");
+ printk(KERN_WARNING PFX "nowayout already set\n");
/* Set the timer to watchdog mode and disable it for now */
pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x00);
@@ -452,44 +444,44 @@ err_devput:
return 0;
}
-static int __init watchdog_init (void)
+static int __init watchdog_init(void)
{
- int ret;
-
- /* Check whether or not the hardware watchdog is there */
- if (!esb_getdevice () || esb_pci == NULL)
- return -ENODEV;
-
- /* Check that the heartbeat value is within it's range ; if not reset to the default */
- if (esb_timer_set_heartbeat (heartbeat)) {
- esb_timer_set_heartbeat (WATCHDOG_HEARTBEAT);
- printk(KERN_INFO PFX "heartbeat value must be 1<heartbeat<2046, using %d\n",
- heartbeat);
- }
-
- ret = register_reboot_notifier(&esb_notifier);
- if (ret != 0) {
- printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
- ret);
- goto err_unmap;
- }
-
- ret = misc_register(&esb_miscdev);
- if (ret != 0) {
- printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
- WATCHDOG_MINOR, ret);
- goto err_notifier;
- }
-
- esb_timer_stop ();
-
- printk (KERN_INFO PFX "initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n",
- BASEADDR, heartbeat, nowayout);
+ int ret;
+
+ /* Check whether or not the hardware watchdog is there */
+ if (!esb_getdevice() || esb_pci == NULL)
+ return -ENODEV;
+
+ /* Check that the heartbeat value is within it's range;
+ if not reset to the default */
+ if (esb_timer_set_heartbeat(heartbeat)) {
+ esb_timer_set_heartbeat(WATCHDOG_HEARTBEAT);
+ printk(KERN_INFO PFX
+ "heartbeat value must be 1<heartbeat<2046, using %d\n",
+ heartbeat);
+ }
+ ret = register_reboot_notifier(&esb_notifier);
+ if (ret != 0) {
+ printk(KERN_ERR PFX
+ "cannot register reboot notifier (err=%d)\n", ret);
+ goto err_unmap;
+ }
- return 0;
+ ret = misc_register(&esb_miscdev);
+ if (ret != 0) {
+ printk(KERN_ERR PFX
+ "cannot register miscdev on minor=%d (err=%d)\n",
+ WATCHDOG_MINOR, ret);
+ goto err_notifier;
+ }
+ esb_timer_stop();
+ printk(KERN_INFO PFX
+ "initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n",
+ BASEADDR, heartbeat, nowayout);
+ return 0;
err_notifier:
- unregister_reboot_notifier(&esb_notifier);
+ unregister_reboot_notifier(&esb_notifier);
err_unmap:
iounmap(BASEADDR);
/* err_release: */
@@ -498,18 +490,18 @@ err_unmap:
pci_disable_device(esb_pci);
/* err_devput: */
pci_dev_put(esb_pci);
- return ret;
+ return ret;
}
-static void __exit watchdog_cleanup (void)
+static void __exit watchdog_cleanup(void)
{
/* Stop the timer before we leave */
if (!nowayout)
- esb_timer_stop ();
+ esb_timer_stop();
/* Deregister */
misc_deregister(&esb_miscdev);
- unregister_reboot_notifier(&esb_notifier);
+ unregister_reboot_notifier(&esb_notifier);
iounmap(BASEADDR);
pci_release_region(esb_pci, 0);
pci_disable_device(esb_pci);
next prev parent reply other threads:[~2008-05-19 13:22 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-19 13:04 [PATCH 00/57] watchdog: Giant scrub Alan Cox
2008-05-19 13:04 ` [PATCH 01/57] Clean acquirewdt and check for BKL dependancies Alan Cox
2008-05-19 13:04 ` [PATCH 02/57] clean up and check advantech watchdog Alan Cox
2008-05-19 13:04 ` [PATCH 03/57] ali: watchdog locking and style Alan Cox
2008-05-19 13:05 ` [PATCH 04/57] AR7 watchdog Alan Cox
2008-05-19 13:05 ` [PATCH 05/57] atp watchdog Alan Cox
2008-05-19 13:05 ` [PATCH 06/57] at91: watchdog to unlocked_ioctl Alan Cox
2008-05-19 13:05 ` [PATCH 07/57] cpu5_wdt: switch " Alan Cox
2008-05-19 13:05 ` [PATCH 08/57] davinci_wdt: unlocked_ioctl and check locking Alan Cox
2008-05-19 13:05 ` [PATCH 09/57] ep93xx_wdt: unlocked_ioctl Alan Cox
2008-05-19 13:05 ` [PATCH 10/57] eurotechwdt: unlocked_ioctl, code lock check and tidy Alan Cox
2008-05-19 13:05 ` [PATCH 11/57] hpwdt: couple of include cleanups Alan Cox
2008-05-19 13:05 ` [PATCH 12/57] ib700wdt: clean up and switch to unlocked_ioctl Alan Cox
2008-05-19 13:05 ` Alan Cox [this message]
2008-05-19 13:06 ` [PATCH 14/57] ibmasr: coding style, locking verify Alan Cox
2008-05-20 5:52 ` Andrey Panin
2008-05-19 13:06 ` [PATCH 15/57] indydog: Clean up and tidy Alan Cox
2008-05-19 13:06 ` [PATCH 16/57] iop: watchdog switch to unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 17/57] it8712f: unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 18/57] iTCO: unlocked_ioctl, coding style and cleanup Alan Cox
2008-05-20 8:26 ` Andrew Morton
2008-05-21 4:26 ` Rusty Russell
2008-05-21 4:36 ` Andrew Morton
2008-05-21 4:58 ` Rusty Russell
2008-05-21 9:29 ` Alan Cox
2008-05-22 5:56 ` Rusty Russell
2008-05-22 6:15 ` Andrew Morton
2008-05-19 13:06 ` [PATCH 19/57] bfin: watchdog cleanup and unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 20/57] booke watchdog: clean up " Alan Cox
2008-05-19 13:06 ` [PATCH 21/57] ixp2000_wdt: " Alan Cox
2008-05-19 13:06 ` [PATCH 22/57] ixp4xx_wdt: unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 23/57] ks8695_wdt: clean up, coding style, unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 24/57] machzwd: " Alan Cox
2008-05-19 13:07 ` [PATCH 25/57] mixcomwd: coding style locking, unlocked_ioctl Alan Cox
2008-05-19 13:07 ` [PATCH 26/57] mpc watchdog: clean up and locking Alan Cox
2008-05-19 13:07 ` [PATCH 27/57] mpcore watchdog: unlocked_ioctl and BKl work Alan Cox
2008-05-19 13:07 ` [PATCH 28/57] mtx-1_wdt: clean up, coding style, unlocked ioctl Alan Cox
2008-05-20 15:08 ` Florian Fainelli
2008-05-19 13:07 ` [PATCH 29/57] mv64x60_wdt: clean up and locking checks Alan Cox
2008-05-19 13:07 ` [PATCH 30/57] omap_wdt: locking, unlocked_ioctl, tidy Alan Cox
2008-05-19 13:07 ` [PATCH 31/57] pc87413_wdt: clean up, coding style, unlocked_ioctl Alan Cox
2008-05-19 13:07 ` [PATCH 32/57] pcwd: clean up, unlocked_ioctl usage Alan Cox
2008-05-19 13:07 ` [PATCH 33/57] pnx4008_wdt: unlocked_ioctl setup Alan Cox
2008-05-19 13:07 ` [PATCH 34/57] rm9k_wdt: clean up Alan Cox
2008-05-19 13:08 ` [PATCH 35/57] s3c2410: watchdog cleanup and switch to unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 36/57] sa1100_wdt: Switch " Alan Cox
2008-05-19 13:08 ` [PATCH 37/57] sbc60xxwdt: clean up and switch " Alan Cox
2008-05-19 13:08 ` [PATCH 38/57] stg7240_wdt: unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 39/57] sbc8360: clean up Alan Cox
2008-05-19 13:08 ` [PATCH 40/57] sbc_epx_c3_wdt: switch to unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 41/57] sb_wdog: Clean up and " Alan Cox
2008-05-19 13:08 ` [PATCH 42/57] sc1200_wdt: clean up, fix locking and use unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 43/57] sc520_wdt: Clean up and switch to unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 44/57] scx200_wdt: clean " Alan Cox
2008-05-19 13:08 ` [PATCH 45/57] shwdt: coding style, cleanup, " Alan Cox
2008-05-19 13:09 ` [PATCH 46/57] smsc37b787_wdt: coding style, " Alan Cox
2008-05-19 13:09 ` [PATCH 47/57] softdog: clean up, coding style and " Alan Cox
2008-05-19 13:09 ` [PATCH 48/57] txx9: Fix locking, " Alan Cox
2008-05-19 13:09 ` [PATCH 49/57] w83627hf: coding style, clean up and " Alan Cox
2008-05-19 13:09 ` [PATCH 50/57] w83697hf_wdt: cleanup, coding style " Alan Cox
2008-05-19 13:09 ` [PATCH 51/57] w83877f_wdt: clean up code, coding style, " Alan Cox
2008-05-19 13:09 ` [PATCH 52/57] w83977f_wdt: clean up, coding style and " Alan Cox
2008-05-19 13:09 ` [PATCH 53/57] wafer5823wdt: Clean up, coding style, " Alan Cox
2008-05-19 13:09 ` [PATCH 54/57] wdrtas: clean " Alan Cox
2008-05-19 13:09 ` [PATCH 55/57] wdt285: switch to unlocked_ioctl and tidy up oddments of coding style Alan Cox
2008-05-19 13:09 ` [PATCH 56/57] wdt977: clean up, coding style and switch to unlocked_ioctl Alan Cox
2008-05-19 13:10 ` [PATCH 57/57] wdt501/pci: Clean " Alan Cox
2008-05-19 18:21 ` [PATCH 00/57] watchdog: Giant scrub Andrew Morton
2008-05-19 19:51 ` Alan Cox
2008-05-20 8:01 ` Wim Van Sebroeck
2008-05-20 8:37 ` Andrew Morton
2008-05-20 15:34 ` Wim Van Sebroeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080519130557.31722.34852.stgit@core \
--to=alan@lxorguk.ukuu.org.uk \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox