public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
To: akpm@osdl.org, linux-kernel@vger.kernel.org, wim@iguana.be
Subject: [PATCH 35/57] s3c2410: watchdog cleanup and switch to unlocked_ioctl
Date: Mon, 19 May 2008 14:08:00 +0100	[thread overview]
Message-ID: <20080519130759.31722.36146.stgit@core> (raw)
In-Reply-To: <20080519124659.31722.51847.stgit@core>

From: Alan Cox <alan@redhat.com>


---

 drivers/watchdog/s3c2410_wdt.c |  148 ++++++++++++++++++++++------------------
 1 files changed, 80 insertions(+), 68 deletions(-)


diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 98532c0..97b4a2e 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -46,9 +46,8 @@
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/clk.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 
 #include <asm/arch/map.h>
 
@@ -65,8 +64,8 @@
 static int nowayout	= WATCHDOG_NOWAYOUT;
 static int tmr_margin	= CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME;
 static int tmr_atboot	= CONFIG_S3C2410_WATCHDOG_ATBOOT;
-static int soft_noboot	= 0;
-static int debug	= 0;
+static int soft_noboot;
+static int debug;
 
 module_param(tmr_margin,  int, 0);
 module_param(tmr_atboot,  int, 0);
@@ -74,24 +73,23 @@ module_param(nowayout,    int, 0);
 module_param(soft_noboot, int, 0);
 module_param(debug,	  int, 0);
 
-MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. default=" __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")");
-
-MODULE_PARM_DESC(tmr_atboot, "Watchdog is started at boot time if set to 1, default=" __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT));
-
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-
+MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. default="
+		__MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")");
+MODULE_PARM_DESC(tmr_atboot,
+		"Watchdog is started at boot time if set to 1, default="
+			__MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT));
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+			__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, 0 to reboot (default depends on ONLY_TESTING)");
-
 MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug, (default 0)");
 
 
 typedef enum close_state {
 	CLOSE_STATE_NOT,
-	CLOSE_STATE_ALLOW=0x4021
+	CLOSE_STATE_ALLOW = 0x4021
 } close_state_t;
 
-static DECLARE_MUTEX(open_lock);
-
+static unsigned long open_lock;
 static struct device    *wdt_dev;	/* platform device attached to */
 static struct resource	*wdt_mem;
 static struct resource	*wdt_irq;
@@ -99,38 +97,58 @@ static struct clk	*wdt_clock;
 static void __iomem	*wdt_base;
 static unsigned int	 wdt_count;
 static close_state_t	 allow_close;
+static DEFINE_SPINLOCK(wdt_lock);
 
 /* watchdog control routines */
 
 #define DBG(msg...) do { \
 	if (debug) \
 		printk(KERN_INFO msg); \
-	} while(0)
+	} while (0)
 
 /* functions */
 
-static int s3c2410wdt_keepalive(void)
+static void s3c2410wdt_keepalive(void)
 {
+	spin_lock(&wdt_lock);
 	writel(wdt_count, wdt_base + S3C2410_WTCNT);
-	return 0;
+	spin_unlock(&wdt_lock);
 }
 
-static int s3c2410wdt_stop(void)
+static void __s3c2410wdt_stop(void)
 {
 	unsigned long wtcon;
 
+	spin_lock(&wdt_lock);
 	wtcon = readl(wdt_base + S3C2410_WTCON);
 	wtcon &= ~(S3C2410_WTCON_ENABLE | S3C2410_WTCON_RSTEN);
 	writel(wtcon, wdt_base + S3C2410_WTCON);
+	spin_unlock(&wdt_lock);
+}
 
-	return 0;
+static void __s3c2410wdt_stop(void)
+{
+	unsigned long wtcon;
+
+	wtcon = readl(wdt_base + S3C2410_WTCON);
+	wtcon &= ~(S3C2410_WTCON_ENABLE | S3C2410_WTCON_RSTEN);
+	writel(wtcon, wdt_base + S3C2410_WTCON);
+}
+
+static void s3c2410wdt_stop(void)
+{
+	spin_lock(&wdt_lock);
+	__s3c2410wdt_stop();
+	spin_unlock(&wdt_lock);
 }
 
-static int s3c2410wdt_start(void)
+static void s3c2410wdt_start(void)
 {
 	unsigned long wtcon;
 
-	s3c2410wdt_stop();
+	spin_lock(&wdt_lock);
+
+	__s3c2410wdt_stop();
 
 	wtcon = readl(wdt_base + S3C2410_WTCON);
 	wtcon |= S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128;
@@ -149,6 +167,7 @@ static int s3c2410wdt_start(void)
 	writel(wdt_count, wdt_base + S3C2410_WTDAT);
 	writel(wdt_count, wdt_base + S3C2410_WTCNT);
 	writel(wtcon, wdt_base + S3C2410_WTCON);
+	spin_unlock(&wdt_lock);
 
 	return 0;
 }
@@ -211,7 +230,7 @@ static int s3c2410wdt_set_heartbeat(int timeout)
 
 static int s3c2410wdt_open(struct inode *inode, struct file *file)
 {
-	if(down_trylock(&open_lock))
+	if (test_and_set_bit(0, &open_lock))
 		return -EBUSY;
 
 	if (nowayout)
@@ -231,15 +250,14 @@ static int s3c2410wdt_release(struct inode *inode, struct file *file)
 	 * 	Lock it in if it's a module and we set nowayout
 	 */
 
-	if (allow_close == CLOSE_STATE_ALLOW) {
+	if (allow_close == CLOSE_STATE_ALLOW)
 		s3c2410wdt_stop();
-	} else {
+	else {
 		dev_err(wdt_dev, "Unexpected close, not stopping watchdog\n");
 		s3c2410wdt_keepalive();
 	}
-
 	allow_close = CLOSE_STATE_NOT;
-	up(&open_lock);
+	clear_bit(0, &open_lock);
 	return 0;
 }
 
@@ -249,7 +267,7 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data,
 	/*
 	 *	Refresh the timer.
 	 */
-	if(len) {
+	if (len) {
 		if (!nowayout) {
 			size_t i;
 
@@ -265,7 +283,6 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data,
 					allow_close = CLOSE_STATE_ALLOW;
 			}
 		}
-
 		s3c2410wdt_keepalive();
 	}
 	return len;
@@ -273,48 +290,41 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data,
 
 #define OPTIONS WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE
 
-static struct watchdog_info s3c2410_wdt_ident = {
+static const struct watchdog_info s3c2410_wdt_ident = {
 	.options          =     OPTIONS,
 	.firmware_version =	0,
 	.identity         =	"S3C2410 Watchdog",
 };
 
 
-static int s3c2410wdt_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long s3c2410wdt_ioctl(struct file *file,	unsigned int cmd,
+							unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	int new_margin;
 
 	switch (cmd) {
-		default:
-			return -ENOTTY;
-
-		case WDIOC_GETSUPPORT:
-			return copy_to_user(argp, &s3c2410_wdt_ident,
-				sizeof(s3c2410_wdt_ident)) ? -EFAULT : 0;
-
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			return put_user(0, p);
-
-		case WDIOC_KEEPALIVE:
-			s3c2410wdt_keepalive();
-			return 0;
-
-		case WDIOC_SETTIMEOUT:
-			if (get_user(new_margin, p))
-				return -EFAULT;
-
-			if (s3c2410wdt_set_heartbeat(new_margin))
-				return -EINVAL;
-
-			s3c2410wdt_keepalive();
-			return put_user(tmr_margin, p);
-
-		case WDIOC_GETTIMEOUT:
-			return put_user(tmr_margin, p);
+	default:
+		return -ENOTTY;
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &s3c2410_wdt_ident,
+			sizeof(s3c2410_wdt_ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_KEEPALIVE:
+		s3c2410wdt_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_margin, p))
+			return -EFAULT;
+		if (s3c2410wdt_set_heartbeat(new_margin))
+			return -EINVAL;
+		s3c2410wdt_keepalive();
+		return put_user(tmr_margin, p);
+	case WDIOC_GETTIMEOUT:
+		return put_user(tmr_margin, p);
 	}
 }
 
@@ -324,7 +334,7 @@ static const struct file_operations s3c2410wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= s3c2410wdt_write,
-	.ioctl		= s3c2410wdt_ioctl,
+	.unlocked_ioctl	= s3c2410wdt_ioctl,
 	.open		= s3c2410wdt_open,
 	.release	= s3c2410wdt_release,
 };
@@ -411,14 +421,15 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 	 * not, try the default value */
 
 	if (s3c2410wdt_set_heartbeat(tmr_margin)) {
-		started = s3c2410wdt_set_heartbeat(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
+		started = s3c2410wdt_set_heartbeat(
+					CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
 
-		if (started == 0) {
-			dev_info(dev,"tmr_margin value out of range, default %d used\n",
+		if (started == 0)
+			dev_info(dev,
+			   "tmr_margin value out of range, default %d used\n",
 			       CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
-		} else {
+		else
 			dev_info(dev, "default timer value is out of range, cannot start\n");
-		}
 	}
 
 	ret = misc_register(&s3c2410wdt_miscdev);
@@ -447,7 +458,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 		 (wtcon & S3C2410_WTCON_ENABLE) ?  "" : "in",
 		 (wtcon & S3C2410_WTCON_RSTEN) ? "" : "dis",
 		 (wtcon & S3C2410_WTCON_INTEN) ? "" : "en");
-	
+
 	return 0;
 
  err_clk:
@@ -487,7 +498,7 @@ static int s3c2410wdt_remove(struct platform_device *dev)
 
 static void s3c2410wdt_shutdown(struct platform_device *dev)
 {
-	s3c2410wdt_stop();	
+	s3c2410wdt_stop();
 }
 
 #ifdef CONFIG_PM
@@ -540,7 +551,8 @@ static struct platform_driver s3c2410wdt_driver = {
 };
 
 
-static char banner[] __initdata = KERN_INFO "S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics\n";
+static char banner[] __initdata =
+	KERN_INFO "S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics\n";
 
 static int __init watchdog_init(void)
 {


  parent reply	other threads:[~2008-05-19 13:30 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-05-19 13:04 [PATCH 00/57] watchdog: Giant scrub Alan Cox
2008-05-19 13:04 ` [PATCH 01/57] Clean acquirewdt and check for BKL dependancies Alan Cox
2008-05-19 13:04 ` [PATCH 02/57] clean up and check advantech watchdog Alan Cox
2008-05-19 13:04 ` [PATCH 03/57] ali: watchdog locking and style Alan Cox
2008-05-19 13:05 ` [PATCH 04/57] AR7 watchdog Alan Cox
2008-05-19 13:05 ` [PATCH 05/57] atp watchdog Alan Cox
2008-05-19 13:05 ` [PATCH 06/57] at91: watchdog to unlocked_ioctl Alan Cox
2008-05-19 13:05 ` [PATCH 07/57] cpu5_wdt: switch " Alan Cox
2008-05-19 13:05 ` [PATCH 08/57] davinci_wdt: unlocked_ioctl and check locking Alan Cox
2008-05-19 13:05 ` [PATCH 09/57] ep93xx_wdt: unlocked_ioctl Alan Cox
2008-05-19 13:05 ` [PATCH 10/57] eurotechwdt: unlocked_ioctl, code lock check and tidy Alan Cox
2008-05-19 13:05 ` [PATCH 11/57] hpwdt: couple of include cleanups Alan Cox
2008-05-19 13:05 ` [PATCH 12/57] ib700wdt: clean up and switch to unlocked_ioctl Alan Cox
2008-05-19 13:05 ` [PATCH 13/57] i6300esb: Style, unlocked_ioctl, cleanup Alan Cox
2008-05-19 13:06 ` [PATCH 14/57] ibmasr: coding style, locking verify Alan Cox
2008-05-20  5:52   ` Andrey Panin
2008-05-19 13:06 ` [PATCH 15/57] indydog: Clean up and tidy Alan Cox
2008-05-19 13:06 ` [PATCH 16/57] iop: watchdog switch to unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 17/57] it8712f: unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 18/57] iTCO: unlocked_ioctl, coding style and cleanup Alan Cox
2008-05-20  8:26   ` Andrew Morton
2008-05-21  4:26     ` Rusty Russell
2008-05-21  4:36       ` Andrew Morton
2008-05-21  4:58         ` Rusty Russell
2008-05-21  9:29       ` Alan Cox
2008-05-22  5:56         ` Rusty Russell
2008-05-22  6:15           ` Andrew Morton
2008-05-19 13:06 ` [PATCH 19/57] bfin: watchdog cleanup and unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 20/57] booke watchdog: clean up " Alan Cox
2008-05-19 13:06 ` [PATCH 21/57] ixp2000_wdt: " Alan Cox
2008-05-19 13:06 ` [PATCH 22/57] ixp4xx_wdt: unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 23/57] ks8695_wdt: clean up, coding style, unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 24/57] machzwd: " Alan Cox
2008-05-19 13:07 ` [PATCH 25/57] mixcomwd: coding style locking, unlocked_ioctl Alan Cox
2008-05-19 13:07 ` [PATCH 26/57] mpc watchdog: clean up and locking Alan Cox
2008-05-19 13:07 ` [PATCH 27/57] mpcore watchdog: unlocked_ioctl and BKl work Alan Cox
2008-05-19 13:07 ` [PATCH 28/57] mtx-1_wdt: clean up, coding style, unlocked ioctl Alan Cox
2008-05-20 15:08   ` Florian Fainelli
2008-05-19 13:07 ` [PATCH 29/57] mv64x60_wdt: clean up and locking checks Alan Cox
2008-05-19 13:07 ` [PATCH 30/57] omap_wdt: locking, unlocked_ioctl, tidy Alan Cox
2008-05-19 13:07 ` [PATCH 31/57] pc87413_wdt: clean up, coding style, unlocked_ioctl Alan Cox
2008-05-19 13:07 ` [PATCH 32/57] pcwd: clean up, unlocked_ioctl usage Alan Cox
2008-05-19 13:07 ` [PATCH 33/57] pnx4008_wdt: unlocked_ioctl setup Alan Cox
2008-05-19 13:07 ` [PATCH 34/57] rm9k_wdt: clean up Alan Cox
2008-05-19 13:08 ` Alan Cox [this message]
2008-05-19 13:08 ` [PATCH 36/57] sa1100_wdt: Switch to unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 37/57] sbc60xxwdt: clean up and switch " Alan Cox
2008-05-19 13:08 ` [PATCH 38/57] stg7240_wdt: unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 39/57] sbc8360: clean up Alan Cox
2008-05-19 13:08 ` [PATCH 40/57] sbc_epx_c3_wdt: switch to unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 41/57] sb_wdog: Clean up and " Alan Cox
2008-05-19 13:08 ` [PATCH 42/57] sc1200_wdt: clean up, fix locking and use unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 43/57] sc520_wdt: Clean up and switch to unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 44/57] scx200_wdt: clean " Alan Cox
2008-05-19 13:08 ` [PATCH 45/57] shwdt: coding style, cleanup, " Alan Cox
2008-05-19 13:09 ` [PATCH 46/57] smsc37b787_wdt: coding style, " Alan Cox
2008-05-19 13:09 ` [PATCH 47/57] softdog: clean up, coding style and " Alan Cox
2008-05-19 13:09 ` [PATCH 48/57] txx9: Fix locking, " Alan Cox
2008-05-19 13:09 ` [PATCH 49/57] w83627hf: coding style, clean up and " Alan Cox
2008-05-19 13:09 ` [PATCH 50/57] w83697hf_wdt: cleanup, coding style " Alan Cox
2008-05-19 13:09 ` [PATCH 51/57] w83877f_wdt: clean up code, coding style, " Alan Cox
2008-05-19 13:09 ` [PATCH 52/57] w83977f_wdt: clean up, coding style and " Alan Cox
2008-05-19 13:09 ` [PATCH 53/57] wafer5823wdt: Clean up, coding style, " Alan Cox
2008-05-19 13:09 ` [PATCH 54/57] wdrtas: clean " Alan Cox
2008-05-19 13:09 ` [PATCH 55/57] wdt285: switch to unlocked_ioctl and tidy up oddments of coding style Alan Cox
2008-05-19 13:09 ` [PATCH 56/57] wdt977: clean up, coding style and switch to unlocked_ioctl Alan Cox
2008-05-19 13:10 ` [PATCH 57/57] wdt501/pci: Clean " Alan Cox
2008-05-19 18:21 ` [PATCH 00/57] watchdog: Giant scrub Andrew Morton
2008-05-19 19:51   ` Alan Cox
2008-05-20  8:01   ` Wim Van Sebroeck
2008-05-20  8:37     ` Andrew Morton
2008-05-20 15:34       ` Wim Van Sebroeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080519130759.31722.36146.stgit@core \
    --to=alan@lxorguk.ukuu.org.uk \
    --cc=akpm@osdl.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=wim@iguana.be \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox