From: Alan Cox <alan@lxorguk.ukuu.org.uk>
To: akpm@osdl.org, linux-kernel@vger.kernel.org, wim@iguana.be
Subject: [PATCH 49/57] w83627hf: coding style, clean up and switch to unlocked_ioctl
Date: Mon, 19 May 2008 14:09:18 +0100 [thread overview]
Message-ID: <20080519130918.31722.90335.stgit@core> (raw)
In-Reply-To: <20080519124659.31722.51847.stgit@core>
From: Alan Cox <alan@redhat.com>
---
drivers/watchdog/w83627hf_wdt.c | 175 ++++++++++++++++++---------------------
1 files changed, 83 insertions(+), 92 deletions(-)
diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
index 3864928..70c843f 100644
--- a/drivers/watchdog/w83627hf_wdt.c
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -37,9 +37,9 @@
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
#include <asm/system.h>
#define WATCHDOG_NAME "w83627hf/thf/hg WDT"
@@ -57,22 +57,26 @@ MODULE_PARM_DESC(wdt_io, "w83627hf/thf WDT io port (default 0x2E)");
static int timeout = WATCHDOG_TIMEOUT; /* in seconds */
module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+MODULE_PARM_DESC(timeout,
+ "Watchdog timeout in seconds. 1 <= timeout <= 255, default="
+ __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+ "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
/*
* Kernel methods.
*/
#define WDT_EFER (wdt_io+0) /* Extended Function Enable Registers */
-#define WDT_EFIR (wdt_io+0) /* Extended Function Index Register (same as EFER) */
+#define WDT_EFIR (wdt_io+0) /* Extended Function Index Register
+ (same as EFER) */
#define WDT_EFDR (WDT_EFIR+1) /* Extended Function Data Register */
-static void
-w83627hf_select_wd_register(void)
+static void w83627hf_select_wd_register(void)
{
unsigned char c;
outb_p(0x87, WDT_EFER); /* Enter extended function mode */
@@ -93,43 +97,45 @@ w83627hf_select_wd_register(void)
outb_p(0x01, WDT_EFDR); /* set bit 0 to activate GPIO2 */
}
-static void
-w83627hf_unselect_wd_register(void)
+static void w83627hf_unselect_wd_register(void)
{
outb_p(0xAA, WDT_EFER); /* Leave extended function mode */
}
/* tyan motherboards seem to set F5 to 0x4C ?
* So explicitly init to appropriate value. */
-static void
-w83627hf_init(void)
+
+static void w83627hf_init(void)
{
unsigned char t;
w83627hf_select_wd_register();
outb_p(0xF6, WDT_EFER); /* Select CRF6 */
- t=inb_p(WDT_EFDR); /* read CRF6 */
+ t = inb_p(WDT_EFDR); /* read CRF6 */
if (t != 0) {
- printk (KERN_INFO PFX "Watchdog already running. Resetting timeout to %d sec\n", timeout);
+ printk(KERN_INFO PFX
+ "Watchdog already running. Resetting timeout to %d sec\n",
+ timeout);
outb_p(timeout, WDT_EFDR); /* Write back to CRF6 */
}
outb_p(0xF5, WDT_EFER); /* Select CRF5 */
- t=inb_p(WDT_EFDR); /* read CRF5 */
- t&=~0x0C; /* set second mode & disable keyboard turning off watchdog */
+ t = inb_p(WDT_EFDR); /* read CRF5 */
+ t &= ~0x0C; /* set second mode & disable keyboard
+ turning off watchdog */
outb_p(t, WDT_EFDR); /* Write back to CRF5 */
outb_p(0xF7, WDT_EFER); /* Select CRF7 */
- t=inb_p(WDT_EFDR); /* read CRF7 */
- t&=~0xC0; /* disable keyboard & mouse turning off watchdog */
+ t = inb_p(WDT_EFDR); /* read CRF7 */
+ t &= ~0xC0; /* disable keyboard & mouse turning off
+ watchdog */
outb_p(t, WDT_EFDR); /* Write back to CRF7 */
w83627hf_unselect_wd_register();
}
-static void
-wdt_ctrl(int timeout)
+static void wdt_ctrl(int timeout)
{
spin_lock(&io_lock);
@@ -143,32 +149,28 @@ wdt_ctrl(int timeout)
spin_unlock(&io_lock);
}
-static int
-wdt_ping(void)
+static int wdt_ping(void)
{
wdt_ctrl(timeout);
return 0;
}
-static int
-wdt_disable(void)
+static int wdt_disable(void)
{
wdt_ctrl(0);
return 0;
}
-static int
-wdt_set_heartbeat(int t)
+static int wdt_set_heartbeat(int t)
{
- if ((t < 1) || (t > 255))
+ if (t < 1 || t > 255)
return -EINVAL;
-
timeout = t;
return 0;
}
-static ssize_t
-wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+static ssize_t wdt_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
{
if (count) {
if (!nowayout) {
@@ -189,72 +191,61 @@ wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
return count;
}
-static int
-wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
- unsigned long arg)
+static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
void __user *argp = (void __user *)arg;
int __user *p = argp;
int new_timeout;
static struct watchdog_info ident = {
- .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+ .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
+ WDIOF_MAGICCLOSE,
.firmware_version = 1,
.identity = "W83627HF WDT",
};
switch (cmd) {
case WDIOC_GETSUPPORT:
- if (copy_to_user(argp, &ident, sizeof(ident)))
- return -EFAULT;
- break;
-
+ if (copy_to_user(argp, &ident, sizeof(ident)))
+ return -EFAULT;
+ break;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
- return put_user(0, p);
-
+ return put_user(0, p);
case WDIOC_KEEPALIVE:
- wdt_ping();
- break;
-
+ wdt_ping();
+ break;
case WDIOC_SETTIMEOUT:
- if (get_user(new_timeout, p))
- return -EFAULT;
- if (wdt_set_heartbeat(new_timeout))
- return -EINVAL;
- wdt_ping();
- /* Fall */
-
+ if (get_user(new_timeout, p))
+ return -EFAULT;
+ if (wdt_set_heartbeat(new_timeout))
+ return -EINVAL;
+ wdt_ping();
+ /* Fall */
case WDIOC_GETTIMEOUT:
- return put_user(timeout, p);
-
+ return put_user(timeout, p);
case WDIOC_SETOPTIONS:
{
- int options, retval = -EINVAL;
-
- if (get_user(options, p))
- return -EFAULT;
-
- if (options & WDIOS_DISABLECARD) {
- wdt_disable();
- retval = 0;
- }
-
- if (options & WDIOS_ENABLECARD) {
- wdt_ping();
- retval = 0;
- }
+ int options, retval = -EINVAL;
- return retval;
+ if (get_user(options, p))
+ return -EFAULT;
+ if (options & WDIOS_DISABLECARD) {
+ wdt_disable();
+ retval = 0;
+ }
+ if (options & WDIOS_ENABLECARD) {
+ wdt_ping();
+ retval = 0;
+ }
+ return retval;
}
-
default:
- return -ENOTTY;
+ return -ENOTTY;
}
return 0;
}
-static int
-wdt_open(struct inode *inode, struct file *file)
+static int wdt_open(struct inode *inode, struct file *file)
{
if (test_and_set_bit(0, &wdt_is_open))
return -EBUSY;
@@ -266,13 +257,13 @@ wdt_open(struct inode *inode, struct file *file)
return nonseekable_open(inode, file);
}
-static int
-wdt_close(struct inode *inode, struct file *file)
+static int wdt_close(struct inode *inode, struct file *file)
{
- if (expect_close == 42) {
+ if (expect_close == 42)
wdt_disable();
- } else {
- printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+ else {
+ printk(KERN_CRIT PFX
+ "Unexpected close, not stopping watchdog!\n");
wdt_ping();
}
expect_close = 0;
@@ -284,8 +275,7 @@ wdt_close(struct inode *inode, struct file *file)
* Notifier for system down
*/
-static int
-wdt_notify_sys(struct notifier_block *this, unsigned long code,
+static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
void *unused)
{
if (code == SYS_DOWN || code == SYS_HALT) {
@@ -303,7 +293,7 @@ static const struct file_operations wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = wdt_write,
- .ioctl = wdt_ioctl,
+ .unlocked_ioctl = wdt_ioctl,
.open = wdt_open,
.release = wdt_close,
};
@@ -323,8 +313,7 @@ static struct notifier_block wdt_notifier = {
.notifier_call = wdt_notify_sys,
};
-static int __init
-wdt_init(void)
+static int __init wdt_init(void)
{
int ret;
@@ -332,12 +321,13 @@ wdt_init(void)
if (wdt_set_heartbeat(timeout)) {
wdt_set_heartbeat(WATCHDOG_TIMEOUT);
- printk (KERN_INFO PFX "timeout value must be 1<=timeout<=255, using %d\n",
- WATCHDOG_TIMEOUT);
+ printk(KERN_INFO PFX
+ "timeout value must be 1 <= timeout <= 255, using %d\n",
+ WATCHDOG_TIMEOUT);
}
if (!request_region(wdt_io, 1, WATCHDOG_NAME)) {
- printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
+ printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
wdt_io);
ret = -EIO;
goto out;
@@ -347,20 +337,22 @@ wdt_init(void)
ret = register_reboot_notifier(&wdt_notifier);
if (ret != 0) {
- printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
- ret);
+ printk(KERN_ERR PFX
+ "cannot register reboot notifier (err=%d)\n", ret);
goto unreg_regions;
}
ret = misc_register(&wdt_miscdev);
if (ret != 0) {
- printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
- WATCHDOG_MINOR, ret);
+ printk(KERN_ERR PFX
+ "cannot register miscdev on minor=%d (err=%d)\n",
+ WATCHDOG_MINOR, ret);
goto unreg_reboot;
}
- printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n",
- timeout, nowayout);
+ printk(KERN_INFO PFX
+ "initialized. timeout=%d sec (nowayout=%d)\n",
+ timeout, nowayout);
out:
return ret;
@@ -371,12 +363,11 @@ unreg_regions:
goto out;
}
-static void __exit
-wdt_exit(void)
+static void __exit wdt_exit(void)
{
misc_deregister(&wdt_miscdev);
unregister_reboot_notifier(&wdt_notifier);
- release_region(wdt_io,1);
+ release_region(wdt_io, 1);
}
module_init(wdt_init);
next prev parent reply other threads:[~2008-05-19 13:35 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-19 13:04 [PATCH 00/57] watchdog: Giant scrub Alan Cox
2008-05-19 13:04 ` [PATCH 01/57] Clean acquirewdt and check for BKL dependancies Alan Cox
2008-05-19 13:04 ` [PATCH 02/57] clean up and check advantech watchdog Alan Cox
2008-05-19 13:04 ` [PATCH 03/57] ali: watchdog locking and style Alan Cox
2008-05-19 13:05 ` [PATCH 04/57] AR7 watchdog Alan Cox
2008-05-19 13:05 ` [PATCH 05/57] atp watchdog Alan Cox
2008-05-19 13:05 ` [PATCH 06/57] at91: watchdog to unlocked_ioctl Alan Cox
2008-05-19 13:05 ` [PATCH 07/57] cpu5_wdt: switch " Alan Cox
2008-05-19 13:05 ` [PATCH 08/57] davinci_wdt: unlocked_ioctl and check locking Alan Cox
2008-05-19 13:05 ` [PATCH 09/57] ep93xx_wdt: unlocked_ioctl Alan Cox
2008-05-19 13:05 ` [PATCH 10/57] eurotechwdt: unlocked_ioctl, code lock check and tidy Alan Cox
2008-05-19 13:05 ` [PATCH 11/57] hpwdt: couple of include cleanups Alan Cox
2008-05-19 13:05 ` [PATCH 12/57] ib700wdt: clean up and switch to unlocked_ioctl Alan Cox
2008-05-19 13:05 ` [PATCH 13/57] i6300esb: Style, unlocked_ioctl, cleanup Alan Cox
2008-05-19 13:06 ` [PATCH 14/57] ibmasr: coding style, locking verify Alan Cox
2008-05-20 5:52 ` Andrey Panin
2008-05-19 13:06 ` [PATCH 15/57] indydog: Clean up and tidy Alan Cox
2008-05-19 13:06 ` [PATCH 16/57] iop: watchdog switch to unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 17/57] it8712f: unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 18/57] iTCO: unlocked_ioctl, coding style and cleanup Alan Cox
2008-05-20 8:26 ` Andrew Morton
2008-05-21 4:26 ` Rusty Russell
2008-05-21 4:36 ` Andrew Morton
2008-05-21 4:58 ` Rusty Russell
2008-05-21 9:29 ` Alan Cox
2008-05-22 5:56 ` Rusty Russell
2008-05-22 6:15 ` Andrew Morton
2008-05-19 13:06 ` [PATCH 19/57] bfin: watchdog cleanup and unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 20/57] booke watchdog: clean up " Alan Cox
2008-05-19 13:06 ` [PATCH 21/57] ixp2000_wdt: " Alan Cox
2008-05-19 13:06 ` [PATCH 22/57] ixp4xx_wdt: unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 23/57] ks8695_wdt: clean up, coding style, unlocked_ioctl Alan Cox
2008-05-19 13:06 ` [PATCH 24/57] machzwd: " Alan Cox
2008-05-19 13:07 ` [PATCH 25/57] mixcomwd: coding style locking, unlocked_ioctl Alan Cox
2008-05-19 13:07 ` [PATCH 26/57] mpc watchdog: clean up and locking Alan Cox
2008-05-19 13:07 ` [PATCH 27/57] mpcore watchdog: unlocked_ioctl and BKl work Alan Cox
2008-05-19 13:07 ` [PATCH 28/57] mtx-1_wdt: clean up, coding style, unlocked ioctl Alan Cox
2008-05-20 15:08 ` Florian Fainelli
2008-05-19 13:07 ` [PATCH 29/57] mv64x60_wdt: clean up and locking checks Alan Cox
2008-05-19 13:07 ` [PATCH 30/57] omap_wdt: locking, unlocked_ioctl, tidy Alan Cox
2008-05-19 13:07 ` [PATCH 31/57] pc87413_wdt: clean up, coding style, unlocked_ioctl Alan Cox
2008-05-19 13:07 ` [PATCH 32/57] pcwd: clean up, unlocked_ioctl usage Alan Cox
2008-05-19 13:07 ` [PATCH 33/57] pnx4008_wdt: unlocked_ioctl setup Alan Cox
2008-05-19 13:07 ` [PATCH 34/57] rm9k_wdt: clean up Alan Cox
2008-05-19 13:08 ` [PATCH 35/57] s3c2410: watchdog cleanup and switch to unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 36/57] sa1100_wdt: Switch " Alan Cox
2008-05-19 13:08 ` [PATCH 37/57] sbc60xxwdt: clean up and switch " Alan Cox
2008-05-19 13:08 ` [PATCH 38/57] stg7240_wdt: unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 39/57] sbc8360: clean up Alan Cox
2008-05-19 13:08 ` [PATCH 40/57] sbc_epx_c3_wdt: switch to unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 41/57] sb_wdog: Clean up and " Alan Cox
2008-05-19 13:08 ` [PATCH 42/57] sc1200_wdt: clean up, fix locking and use unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 43/57] sc520_wdt: Clean up and switch to unlocked_ioctl Alan Cox
2008-05-19 13:08 ` [PATCH 44/57] scx200_wdt: clean " Alan Cox
2008-05-19 13:08 ` [PATCH 45/57] shwdt: coding style, cleanup, " Alan Cox
2008-05-19 13:09 ` [PATCH 46/57] smsc37b787_wdt: coding style, " Alan Cox
2008-05-19 13:09 ` [PATCH 47/57] softdog: clean up, coding style and " Alan Cox
2008-05-19 13:09 ` [PATCH 48/57] txx9: Fix locking, " Alan Cox
2008-05-19 13:09 ` Alan Cox [this message]
2008-05-19 13:09 ` [PATCH 50/57] w83697hf_wdt: cleanup, coding style and " Alan Cox
2008-05-19 13:09 ` [PATCH 51/57] w83877f_wdt: clean up code, coding style, " Alan Cox
2008-05-19 13:09 ` [PATCH 52/57] w83977f_wdt: clean up, coding style and " Alan Cox
2008-05-19 13:09 ` [PATCH 53/57] wafer5823wdt: Clean up, coding style, " Alan Cox
2008-05-19 13:09 ` [PATCH 54/57] wdrtas: clean " Alan Cox
2008-05-19 13:09 ` [PATCH 55/57] wdt285: switch to unlocked_ioctl and tidy up oddments of coding style Alan Cox
2008-05-19 13:09 ` [PATCH 56/57] wdt977: clean up, coding style and switch to unlocked_ioctl Alan Cox
2008-05-19 13:10 ` [PATCH 57/57] wdt501/pci: Clean " Alan Cox
2008-05-19 18:21 ` [PATCH 00/57] watchdog: Giant scrub Andrew Morton
2008-05-19 19:51 ` Alan Cox
2008-05-20 8:01 ` Wim Van Sebroeck
2008-05-20 8:37 ` Andrew Morton
2008-05-20 15:34 ` Wim Van Sebroeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080519130918.31722.90335.stgit@core \
--to=alan@lxorguk.ukuu.org.uk \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox