From: Rik van Riel <riel@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>,
Lee Schermerhorn <lee.schermerhorn@hp.com>,
Kosaki Motohiro <kosaki.motohiro@jp.fujitsu.com>
Subject: [PATCH -mm 14/16] Non-reclaimable page statistics
Date: Fri, 23 May 2008 15:55:20 -0400 [thread overview]
Message-ID: <20080523195535.787625182@redhat.com> (raw)
In-Reply-To: 20080523195506.084894989@redhat.com
[-- Attachment #1: rvr-12-lts-noreclaim-non-reclaimable-page-statistics.patch --]
[-- Type: text/plain, Size: 5263 bytes --]
From: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Report non-reclaimable pages per zone and system wide.
Note: may want to track/report some specific reasons for
nonreclaimability for deciding when to splice the noreclaim
lists back to the normal lru. That will be tricky,
especially in shrink_active_list(), where we'd need someplace
to save the per page reason for non-reclaimability until the
pages are dumped back onto the noreclaim list from the pagevec.
Note: my tests indicate that NR_NORECLAIM and probably the
other LRU stats aren't being maintained properly--especially
with large amounts of mlocked memory and the mlock patch in
this series installed. Can't be sure of this, as I don't
know why the pages are on the noreclaim list. Needs further
investigation.
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
---
V2 -> V3:
+ rebase to 23-mm1 atop RvR's split LRU series
V1 -> V2:
no changes
drivers/base/node.c | 6 ++++++
fs/proc/proc_misc.c | 6 ++++++
mm/page_alloc.c | 16 +++++++++++++++-
mm/vmstat.c | 3 +++
4 files changed, 30 insertions(+), 1 deletion(-)
Index: linux-2.6.26-rc2-mm1/mm/page_alloc.c
===================================================================
--- linux-2.6.26-rc2-mm1.orig/mm/page_alloc.c 2008-05-23 14:55:22.000000000 -0400
+++ linux-2.6.26-rc2-mm1/mm/page_alloc.c 2008-05-23 15:04:35.000000000 -0400
@@ -1918,12 +1918,20 @@ void show_free_areas(void)
}
printk("Active_anon:%lu active_file:%lu inactive_anon%lu\n"
- " inactive_file:%lu dirty:%lu writeback:%lu unstable:%lu\n"
+ " inactive_file:%lu"
+//TODO: check/adjust line lengths
+#ifdef CONFIG_NORECLAIM_LRU
+ " noreclaim:%lu"
+#endif
+ " dirty:%lu writeback:%lu unstable:%lu\n"
" free:%lu slab:%lu mapped:%lu pagetables:%lu bounce:%lu\n",
global_page_state(NR_ACTIVE_ANON),
global_page_state(NR_ACTIVE_FILE),
global_page_state(NR_INACTIVE_ANON),
global_page_state(NR_INACTIVE_FILE),
+#ifdef CONFIG_NORECLAIM_LRU
+ global_page_state(NR_NORECLAIM),
+#endif
global_page_state(NR_FILE_DIRTY),
global_page_state(NR_WRITEBACK),
global_page_state(NR_UNSTABLE_NFS),
@@ -1950,6 +1958,9 @@ void show_free_areas(void)
" inactive_anon:%lukB"
" active_file:%lukB"
" inactive_file:%lukB"
+#ifdef CONFIG_NORECLAIM_LRU
+ " noreclaim:%lukB"
+#endif
" present:%lukB"
" pages_scanned:%lu"
" all_unreclaimable? %s"
@@ -1963,6 +1974,9 @@ void show_free_areas(void)
K(zone_page_state(zone, NR_INACTIVE_ANON)),
K(zone_page_state(zone, NR_ACTIVE_FILE)),
K(zone_page_state(zone, NR_INACTIVE_FILE)),
+#ifdef CONFIG_NORECLAIM_LRU
+ K(zone_page_state(zone, NR_NORECLAIM)),
+#endif
K(zone->present_pages),
zone->pages_scanned,
(zone_is_all_unreclaimable(zone) ? "yes" : "no")
Index: linux-2.6.26-rc2-mm1/mm/vmstat.c
===================================================================
--- linux-2.6.26-rc2-mm1.orig/mm/vmstat.c 2008-05-23 14:50:58.000000000 -0400
+++ linux-2.6.26-rc2-mm1/mm/vmstat.c 2008-05-23 15:04:35.000000000 -0400
@@ -699,6 +699,9 @@ static const char * const vmstat_text[]
"nr_active_anon",
"nr_inactive_file",
"nr_active_file",
+#ifdef CONFIG_NORECLAIM_LRU
+ "nr_noreclaim",
+#endif
"nr_anon_pages",
"nr_mapped",
"nr_file_pages",
Index: linux-2.6.26-rc2-mm1/drivers/base/node.c
===================================================================
--- linux-2.6.26-rc2-mm1.orig/drivers/base/node.c 2008-05-23 14:50:58.000000000 -0400
+++ linux-2.6.26-rc2-mm1/drivers/base/node.c 2008-05-23 15:04:35.000000000 -0400
@@ -67,6 +67,9 @@ static ssize_t node_read_meminfo(struct
"Node %d Inactive(anon): %8lu kB\n"
"Node %d Active(file): %8lu kB\n"
"Node %d Inactive(file): %8lu kB\n"
+#ifdef CONFIG_NORECLAIM_LRU
+ "Node %d Noreclaim: %8lu kB\n"
+#endif
#ifdef CONFIG_HIGHMEM
"Node %d HighTotal: %8lu kB\n"
"Node %d HighFree: %8lu kB\n"
@@ -96,6 +99,9 @@ static ssize_t node_read_meminfo(struct
nid, node_page_state(nid, NR_INACTIVE_ANON),
nid, node_page_state(nid, NR_ACTIVE_FILE),
nid, node_page_state(nid, NR_INACTIVE_FILE),
+#ifdef CONFIG_NORECLAIM_LRU
+ nid, node_page_state(nid, NR_NORECLAIM),
+#endif
#ifdef CONFIG_HIGHMEM
nid, K(i.totalhigh),
nid, K(i.freehigh),
Index: linux-2.6.26-rc2-mm1/fs/proc/proc_misc.c
===================================================================
--- linux-2.6.26-rc2-mm1.orig/fs/proc/proc_misc.c 2008-05-23 14:50:58.000000000 -0400
+++ linux-2.6.26-rc2-mm1/fs/proc/proc_misc.c 2008-05-23 15:04:35.000000000 -0400
@@ -174,6 +174,9 @@ static int meminfo_read_proc(char *page,
"Inactive(anon): %8lu kB\n"
"Active(file): %8lu kB\n"
"Inactive(file): %8lu kB\n"
+#ifdef CONFIG_NORECLAIM_LRU
+ "Noreclaim: %8lu kB\n"
+#endif
#ifdef CONFIG_HIGHMEM
"HighTotal: %8lu kB\n"
"HighFree: %8lu kB\n"
@@ -209,6 +212,9 @@ static int meminfo_read_proc(char *page,
K(inactive_anon),
K(active_file),
K(inactive_file),
+#ifdef CONFIG_NORECLAIM_LRU
+ K(global_page_state(NR_NORECLAIM)),
+#endif
#ifdef CONFIG_HIGHMEM
K(i.totalhigh),
K(i.freehigh),
--
All Rights Reversed
next prev parent reply other threads:[~2008-05-23 22:09 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-23 19:55 [PATCH -mm 00/16] VM pageout scalability improvements (V8) Rik van Riel
2008-05-23 19:55 ` [PATCH -mm 01/16] move isolate_lru_page() to vmscan.c Rik van Riel
2008-05-23 19:55 ` [PATCH -mm 02/16] Use an indexed array for LRU variables Rik van Riel
2008-05-27 16:54 ` Lee Schermerhorn
2008-05-27 17:03 ` Rik van Riel
2008-05-23 19:55 ` [PATCH -mm 03/16] use an array for the LRU pagevecs Rik van Riel
2008-05-23 19:55 ` [PATCH -mm 04/16] free swap space on swap-in/activation Rik van Riel
2008-05-28 9:08 ` Daisuke Nishimura
2008-05-23 19:55 ` [PATCH -mm 05/16] define page_file_cache() function Rik van Riel
2008-05-23 19:55 ` [PATCH -mm 06/16] split LRU lists into anon & file sets Rik van Riel
2008-05-23 19:55 ` [PATCH -mm 07/16] second chance replacement for anonymous pages Rik van Riel
2008-05-28 5:36 ` Daisuke Nishimura
2008-05-28 13:39 ` Rik van Riel
2008-05-28 15:42 ` Daisuke Nishimura
2008-05-28 16:08 ` Rik van Riel
2008-05-28 11:03 ` KOSAKI Motohiro
2008-05-28 13:43 ` Rik van Riel
2008-05-23 19:55 ` [PATCH -mm 08/16] add some sanity checks to get_scan_ratio Rik van Riel
2008-05-23 19:55 ` [PATCH -mm 09/16] fix pagecache reclaim referenced bit check Rik van Riel
2008-05-23 19:55 ` [PATCH -mm 10/16] add newly swapped in pages to the inactive list Rik van Riel
2008-05-23 19:55 ` [PATCH -mm 11/16] more aggressively use lumpy reclaim Rik van Riel
2008-05-23 19:55 ` [PATCH -mm 12/16] pageflag helpers for configed-out flags Rik van Riel
2008-05-23 19:55 ` [PATCH -mm 13/16] No Reclaim LRU Infrastructure Rik van Riel
2008-05-23 19:55 ` Rik van Riel [this message]
2008-05-23 19:55 ` [PATCH -mm 15/16] ramfs pages are non-reclaimable Rik van Riel
2008-05-23 19:55 ` [PATCH -mm 16/16] SHM_LOCKED pages are nonreclaimable Rik van Riel
2008-05-26 18:24 ` [PATCH -mm 00/16] VM pageout scalability improvements (V8) Balbir Singh
2008-05-26 19:33 ` Rik van Riel
2008-05-27 15:54 ` Lee Schermerhorn
2008-05-27 16:10 ` Balbir Singh
2008-05-28 1:12 ` KAMEZAWA Hiroyuki
2008-05-28 11:04 ` [RFC PATCH] No Reclaim LRU Infrastructure enhancement for memcgroup KOSAKI Motohiro
2008-05-29 2:30 ` Balbir Singh
2008-05-29 11:14 ` Daisuke Nishimura
2008-05-28 11:49 ` [PATCH -mm 00/16] VM pageout scalability improvements (V8) Balbir Singh
2008-05-28 13:33 ` KOSAKI Motohiro
2008-05-28 13:36 ` Balbir Singh
2008-05-29 12:47 ` Carsten Otte
2008-05-29 14:43 ` Rik van Riel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080523195535.787625182@redhat.com \
--to=riel@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=kosaki.motohiro@jp.fujitsu.com \
--cc=lee.schermerhorn@hp.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox