From: Theodore Tso <tytso@mit.edu>
To: Hugh Dickins <hugh@veritas.com>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Andrew Morton <akpm@linux-foundation.org>,
Ingo Molnar <mingo@elte.hu>,
Linus Torvalds <torvalds@linux-foundation.org>,
Suresh Siddha <suresh.b.siddha@intel.com>,
Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>,
"Rafael J. Wysocki" <rjw@sisk.pl>
Subject: Re: [Bug #10732] REGRESSION: 2.6.26-rc2-git4: X server failed start on X61s laptop
Date: Tue, 27 May 2008 08:54:26 -0400 [thread overview]
Message-ID: <20080527125426.GJ7515@mit.edu> (raw)
In-Reply-To: <20080526192247.GA7515@mit.edu>
Bug #10732 is now closed. BTW, it seems d*mned strange that the
submitter of the bug doesn't have the power to close a bug without
first grabbing the bug as the bug-fixer, changing its state to
ASSIGNED, and *then* being allowed to close the bug. Grumble,
bugzilla's !#@#?@ process straightjacket....
- Ted
next prev parent reply other threads:[~2008-05-27 12:55 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-24 20:28 2.6.26-rc3-git7: Reported regressions from 2.6.25 Rafael J. Wysocki
2008-05-24 20:28 ` [Bug #10493] mips BCM47XX compile error Rafael J. Wysocki
2008-05-25 7:03 ` Adrian Bunk
2008-05-24 20:31 ` [Bug #10557] [regression] latest git couse kernel oops Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10582] INFO: task pdflush:27505 blocked for more than 120 seconds Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10724] ACPI : EC: GPE Rafael J. Wysocki
2008-05-24 23:08 ` Justin Mattock
2008-05-25 7:21 ` Fabio Comolli
2008-05-25 18:36 ` Justin Mattock
2008-05-24 20:31 ` [Bug #10713] ehci splatter in 2.6.26-rc2 Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10725] Write protect on on Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10708] V4L2-based build error Rafael J. Wysocki
2008-05-29 14:48 ` Jonathan Corbet
2008-05-29 21:19 ` Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10670] BUG: linux-2.6.26-rc1 oops at thinkpad_acpi:led_set_status Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10715] 2.6.25 -> 2.6.26-rc1: pcmcia flash card changed name from hda to hdc Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10629] 2.6.26-rc1-$sha1: RIP __d_lookup+0x8c/0x160 Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10606] 2.6.26-rc1 regression: ACPI fails to load SDT. - Dell M1530 Rafael J. Wysocki
2008-05-26 4:48 ` Nigel Cunningham
2008-05-24 20:31 ` [Bug #10616] Horrendous Audio Stutter - current git Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10714] Badness seen on 2.6.26-rc2 with lockdep enabled Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10686] critical thermal shutdown regression 2.6.26-rc1 - HP Pavilion dv6700 Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10628] 2.6.26-rc1-git1 -- trying to get vblank count for disabled pipe 0 Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10642] general protection fault: 0000 [1] PREEMPT SMP DEBUG_PAGEALLOC Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10613] BIOS bug, APIC version is 0 for CPU#0! Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10711] BUG: unable to handle kernel paging request - scsi_bus_uevent Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10630] USB devices plugged into dock are not discoverred until reload of ehci-hcd Rafael J. Wysocki
2008-05-25 9:53 ` Oliver Neukum
2008-05-29 21:17 ` Rafael J. Wysocki
2008-05-31 7:29 ` Greg KH
2008-05-31 16:28 ` Alan Stern
2008-05-31 18:31 ` Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10632] [2.6.26-rc1] Output to console stops when booted without 'vga=791' Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10710] [BISECTED] Lots of "rescheduling IPIs" in powertop Rafael J. Wysocki
2008-05-24 21:35 ` Vegard Nossum
2008-05-25 18:19 ` Adrian Bunk
2008-05-24 20:31 ` [Bug #10638] sysbench+mysql(oltp, readonly) 30% regression with 2.6.26-rc1 Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10669] ACPI: kmemcheck: Caught 16-bit read from freed memory (f7c12ec6) Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10717] crossbuild fails in modpost Rafael J. Wysocki
2008-05-25 18:15 ` Sam Ravnborg
2008-05-24 20:31 ` [Bug #10634] volanoMark regression with kernel 2.6.26-rc1 Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10648] CONFIG_PRINTK_TIME broken on git HEAD ? Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10716] VIDEO_DEV=y, DVB_CORE=m build error Rafael J. Wysocki
2008-05-24 21:48 ` Adrian Bunk
2008-05-24 20:31 ` [Bug #10760] PCIEHP breakage in 2.6.26-rc1,2.6.26-rc2,2.6.26-rc3 Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10749] the system doesn't shutdown Rafael J. Wysocki
2008-05-25 22:19 ` Bartlomiej Zolnierkiewicz
2008-05-25 15:40 ` Riccardo Gori
2008-05-27 18:58 ` Bartlomiej Zolnierkiewicz
2008-05-24 20:31 ` [Bug #10748] dhclient fails to run; capabilities error Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10765] iwl3945/mac80211: association times out since 2.6.26-rc1 Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10764] some serial configurations are now broken Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10787] pcie hotplug bootup crash fix Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10733] avr32: export copy_page Rafael J. Wysocki
2008-05-24 21:47 ` Adrian Bunk
2008-05-24 20:31 ` [Bug #10726] x86-64 NODES_SHIFT compile failure Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10732] REGRESSION: 2.6.26-rc2-git4: X server failed start on X61s laptop Rafael J. Wysocki
2008-05-26 10:24 ` Hugh Dickins
2008-05-26 19:22 ` Theodore Tso
2008-05-27 12:54 ` Theodore Tso [this message]
2008-05-29 20:54 ` Rafael J. Wysocki
2008-05-29 21:15 ` Randy.Dunlap
[not found] ` <8f3aa8d60805291454s280a28d1g6c3891276c69a69e@mail.gmail.com>
2008-05-29 23:28 ` Jon Tollefson
2008-05-24 20:31 ` [Bug #10786] 2.6.26-rc3 64bit SMP does not boot on J5600 Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10731] gianfar build failure Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #9791] Clock is running too fast^Wslow using acpi_pm clocksource Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10742] BISECTED REGRESSION: 2.6.26-rc2: FUSE changes break mount of ntfs-3g Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10751] pciehp probing slow, duplicate kobject_add Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10761] hackbench regression with 2.6.26-rc2 on tulsa machine Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10730] build issue #503 for v2.6.26-rc2-433-gf26a398 : undefined reference to `request_firmware' Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10762] ocfs2: rename user_stack{,_ops} Rafael J. Wysocki
2008-05-24 21:47 ` Adrian Bunk
2008-05-24 20:31 ` [Bug #10741] bug in `tty: BKL pushdown'? Rafael J. Wysocki
2008-05-24 20:31 ` [Bug #10759] recent 2.6.26 kernel hangs at suspend Rafael J. Wysocki
2008-05-25 0:30 ` 2.6.26-rc3-git7: Reported regressions from 2.6.25 Jeff Chua
2008-05-25 18:28 ` Adrian Bunk
2008-05-25 20:14 ` Bob Copeland
-- strict thread matches above, loose matches on Subject: below --
2008-05-18 11:10 2.6.26-rc2-git5: " Rafael J. Wysocki
2008-05-18 11:13 ` [Bug #10732] REGRESSION: 2.6.26-rc2-git4: X server failed start on X61s laptop Rafael J. Wysocki
2008-05-17 7:32 Theodore Ts'o
2008-05-17 13:21 ` Pallipadi, Venkatesh
2008-05-17 15:41 ` [Bug 10732] " Theodore Tso
2008-05-17 16:36 ` Arjan van de Ven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080527125426.GJ7515@mit.edu \
--to=tytso@mit.edu \
--cc=akpm@linux-foundation.org \
--cc=hugh@veritas.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=rjw@sisk.pl \
--cc=suresh.b.siddha@intel.com \
--cc=torvalds@linux-foundation.org \
--cc=venkatesh.pallipadi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox