[PATCH] x86: make generic arch support NUMAQ v2

[Yinghai Lu <yhlu.kernel@gmail.com>]

so it could fallback to normal numa.

NUMAQ depends on GENERICARCH

also decouple genericarch numa with acpi.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>

Index: linux-2.6/arch/x86/Kconfig
===================================================================
--- linux-2.6.orig/arch/x86/Kconfig
+++ linux-2.6/arch/x86/Kconfig
@@ -264,17 +264,6 @@ config X86_VOYAGER
 	  If you do not specifically know you have a Voyager based machine,
 	  say N here, otherwise the kernel you build will not be bootable.
 
-config X86_NUMAQ
-	bool "NUMAQ (IBM/Sequent)"
-	depends on SMP && X86_32 && PCI
-	select NUMA
-	help
-	  This option is used for getting Linux to run on a (IBM/Sequent) NUMA
-	  multiquad box. This changes the way that processors are bootstrapped,
-	  and uses Clustered Logical APIC addressing mode instead of Flat Logical.
-	  You will need a new lynxer.elf file to flash your firmware with - send
-	  email to <Martin.Bligh@us.ibm.com>.
-
 config X86_SUMMIT
 	bool "Summit/EXA (IBM x440)"
 	depends on X86_32 && SMP
@@ -307,12 +296,12 @@ config X86_VISWS
 	  and vice versa. See <file:Documentation/sgi-visws.txt> for details.
 
 config X86_GENERICARCH
-       bool "Generic architecture (Summit, bigsmp, ES7000, default)"
+       bool "Generic architecture (NUMAQ, Summit, bigsmp, ES7000, default)"
 	depends on X86_32
        help
-          This option compiles in the Summit, bigsmp, ES7000, default subarchitectures.
-	  It is intended for a generic binary kernel.
-	  If you want a NUMA kernel, select ACPI.   We need SRAT for NUMA.
+          This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default
+	  subarchitectures.  It is intended for a generic binary kernel.
+	  You need enable NUMA, otherwise NUMAQ is skipped.
 
 config X86_ES7000
 	bool "Support for Unisys ES7000 IA32 series"
@@ -348,6 +337,17 @@ config X86_VSMP
 
 endchoice
 
+config X86_NUMAQ
+	bool "NUMAQ (IBM/Sequent)"
+	depends on SMP && X86_32 && PCI && X86_GENERICARCH
+	select NUMA
+	help
+	  This option is used for getting Linux to run on a NUMAQ (IBM/Sequent)
+	  NUMA multiquad box. This changes the way that processors are
+	  bootstrapped, and uses Clustered Logical APIC addressing mode instead
+	  of Flat Logical.  You will need a new lynxer.elf file to flash your
+	  firmware with - send email to <Martin.Bligh@us.ibm.com>.
+
 config SCHED_NO_NO_OMIT_FRAME_POINTER
 	def_bool y
 	prompt "Single-depth WCHAN output"
@@ -908,9 +908,9 @@ config X86_PAE
 config NUMA
 	bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)"
 	depends on SMP
-	depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI) && EXPERIMENTAL)
+	depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_GENERICARCH || X86_SUMMIT && ACPI) && EXPERIMENTAL)
 	default n if X86_PC
-	default y if (X86_NUMAQ || X86_SUMMIT)
+	default y if (X86_NUMAQ || X86_SUMMIT || X86_GENERICARCH)
 	help
 	  Enable NUMA (Non Uniform Memory Access) support.
 	  The kernel will try to allocate memory used by a CPU on the
Index: linux-2.6/arch/x86/kernel/io_apic_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/io_apic_32.c
+++ linux-2.6/arch/x86/kernel/io_apic_32.c
@@ -1715,7 +1715,6 @@ void disable_IO_APIC(void)
  * by Matt Domsch <Matt_Domsch@dell.com>  Tue Dec 21 12:25:05 CST 1999
  */
 
-#ifndef CONFIG_X86_NUMAQ
 static void __init setup_ioapic_ids_from_mpc(void)
 {
 	union IO_APIC_reg_00 reg_00;
@@ -1725,6 +1724,11 @@ static void __init setup_ioapic_ids_from
 	unsigned char old_id;
 	unsigned long flags;
 
+#ifdef CONFIG_X86_NUMAQ
+	if (found_numaq)
+		return;
+#endif
+
 	/*
 	 * Don't check I/O APIC IDs for xAPIC systems.  They have
 	 * no meaning without the serial APIC bus.
@@ -1821,9 +1825,6 @@ static void __init setup_ioapic_ids_from
 			apic_printk(APIC_VERBOSE, " ok.\n");
 	}
 }
-#else
-static void __init setup_ioapic_ids_from_mpc(void) { }
-#endif
 
 int no_timer_check __initdata;
 
Index: linux-2.6/arch/x86/kernel/mpparse.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/mpparse.c
+++ linux-2.6/arch/x86/kernel/mpparse.c
@@ -49,15 +49,73 @@ static int __init mpf_checksum(unsigned 
 }
 
 #ifdef CONFIG_X86_NUMAQ
+int found_numaq;
 /*
  * Have to match translation table entries to main table entries by counter
  * hence the mpc_record variable .... can't see a less disgusting way of
  * doing this ....
  */
+struct mpc_config_translation {
+	unsigned char mpc_type;
+	unsigned char trans_len;
+	unsigned char trans_type;
+	unsigned char trans_quad;
+	unsigned char trans_global;
+	unsigned char trans_local;
+	unsigned short trans_reserved;
+};
+
 
 static int mpc_record;
 static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY]
     __cpuinitdata;
+
+static inline int generate_logical_apicid(int quad, int phys_apicid)
+{
+	return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
+}
+
+
+static inline int mpc_apic_id(struct mpc_config_processor *m,
+			struct mpc_config_translation *translation_record)
+{
+	int quad = translation_record->trans_quad;
+	int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
+
+	printk(KERN_DEBUG "Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
+	       m->mpc_apicid,
+	       (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
+	       (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
+	       m->mpc_apicver, quad, logical_apicid);
+	return logical_apicid;
+}
+
+int mp_bus_id_to_node[MAX_MP_BUSSES];
+
+int mp_bus_id_to_local[MAX_MP_BUSSES];
+
+static void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
+	struct mpc_config_translation *translation)
+{
+	int quad = translation->trans_quad;
+	int local = translation->trans_local;
+
+	mp_bus_id_to_node[m->mpc_busid] = quad;
+	mp_bus_id_to_local[m->mpc_busid] = local;
+	printk(KERN_INFO "Bus #%d is %s (node %d)\n",
+	       m->mpc_busid, name, quad);
+}
+
+int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+static void mpc_oem_pci_bus(struct mpc_config_bus *m,
+	struct mpc_config_translation *translation)
+{
+	int quad = translation->trans_quad;
+	int local = translation->trans_local;
+
+	quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
+}
+
 #endif
 
 static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
@@ -84,6 +142,9 @@ static void __cpuinit MP_processor_info(
 
 	printk(KERN_INFO "Processor #%d%s\n", m->mpc_apicid, bootup_cpu);
 	generic_processor_info(apicid, m->mpc_apicver);
+#ifdef CONFIG_X86_GENERICARCH
+	generic_bigsmp_probe();
+#endif
 }
 
 #ifdef CONFIG_X86_IO_APIC
@@ -321,11 +382,11 @@ static void __init smp_read_mpc_oem(stru
 	}
 }
 
-static inline void mps_oem_check(struct mp_config_table *mpc, char *oem,
+void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
 				 char *productid)
 {
 	if (strncmp(oem, "IBM NUMA", 8))
-		printk("Warning!  May not be a NUMA-Q system!\n");
+		printk("Warning!  Not a NUMA-Q system!\n");
 	else
 		found_numaq = 1;
 
@@ -388,7 +449,16 @@ static int __init smp_read_mpc(struct mp
 		return 0;
 
 #ifdef CONFIG_X86_32
-	mps_oem_check(mpc, oem, str);
+	/*
+	 * need to make sure summit and es7000's mps_oem_check is safe to be
+	 * called early via genericarch 's mps_oem_check
+	 */
+	if (early) {
+#ifdef CONFIG_X86_NUMAQ
+		numaq_mps_oem_check(mpc, oem, str);
+#endif
+	} else
+		mps_oem_check(mpc, oem, str);
 #endif
 
 	/* save the local APIC address, it might be non-default */
Index: linux-2.6/arch/x86/kernel/numaq_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/numaq_32.c
+++ linux-2.6/arch/x86/kernel/numaq_32.c
@@ -36,8 +36,6 @@
 
 #define	MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))
 
-int found_numaq;
-
 /*
  * Function: smp_dump_qct()
  *
@@ -105,13 +103,3 @@ static int __init numaq_tsc_disable(void
 }
 arch_initcall(numaq_tsc_disable);
 
-#ifdef CONFIG_ACPI
-/*
- * Dummy implementation:
- */
-struct pci_bus * __devinit
-pci_acpi_scan_root(struct acpi_device *device, int domain, int busnum)
-{
-	return NULL;
-}
-#endif
Index: linux-2.6/arch/x86/mach-generic/Makefile
===================================================================
--- linux-2.6.orig/arch/x86/mach-generic/Makefile
+++ linux-2.6/arch/x86/mach-generic/Makefile
@@ -2,7 +2,8 @@
 # Makefile for the generic architecture
 #
 
-EXTRA_CFLAGS	:= -Iarch/x86/kernel
+EXTRA_CFLAGS		:= -Iarch/x86/kernel
 
-obj-y		:= probe.o summit.o bigsmp.o es7000.o default.o 
-obj-y		+= ../../x86/mach-es7000/
+obj-y			:= probe.o summit.o bigsmp.o es7000.o default.o
+obj-$(CONFIG_X86_NUMAQ)	+= numaq.o
+obj-y			+= ../../x86/mach-es7000/
Index: linux-2.6/arch/x86/mach-generic/probe.c
===================================================================
--- linux-2.6.orig/arch/x86/mach-generic/probe.c
+++ linux-2.6/arch/x86/mach-generic/probe.c
@@ -16,6 +16,7 @@
 #include <asm/apicdef.h>
 #include <asm/genapic.h>
 
+extern struct genapic apic_numaq;
 extern struct genapic apic_summit;
 extern struct genapic apic_bigsmp;
 extern struct genapic apic_es7000;
@@ -24,6 +25,9 @@ extern struct genapic apic_default;
 struct genapic *genapic = &apic_default;
 
 static struct genapic *apic_probe[] __initdata = {
+#ifdef CONFIG_X86_NUMAQ
+	&apic_numaq,
+#endif
 	&apic_summit,
 	&apic_bigsmp,
 	&apic_es7000,
@@ -88,7 +92,8 @@ void __init generic_apic_probe(void)
 
 /* These functions can switch the APIC even after the initial ->probe() */
 
-int __init mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid)
+int __init mps_oem_check(struct mp_config_table *mpc, char *oem,
+				 char *productid)
 {
 	int i;
 	for (i = 0; apic_probe[i]; ++i) {
Index: linux-2.6/arch/x86/pci/Makefile_32
===================================================================
--- linux-2.6.orig/arch/x86/pci/Makefile_32
+++ linux-2.6/arch/x86/pci/Makefile_32
@@ -13,10 +13,11 @@ pci-y				:= fixup.o
 pci-$(CONFIG_ACPI)		+= acpi.o
 pci-y				+= legacy.o irq.o
 
-# Careful: VISWS and NUMAQ overrule the pci-y above. The colons are
+# Careful: VISWS overrule the pci-y above. The colons are
 # therefor correct. This needs a proper fix by distangling the code.
 pci-$(CONFIG_X86_VISWS)		:= visws.o fixup.o
-pci-$(CONFIG_X86_NUMAQ)		:= numa.o irq.o
+
+pci-$(CONFIG_X86_NUMAQ)		+= numa.o
 
 # Necessary for NUMAQ as well
 pci-$(CONFIG_NUMA)		+= mp_bus_to_node.o
Index: linux-2.6/arch/x86/pci/numa.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/numa.c
+++ linux-2.6/arch/x86/pci/numa.c
@@ -6,45 +6,21 @@
 #include <linux/init.h>
 #include <linux/nodemask.h>
 #include <mach_apic.h>
+#include <asm/mpspec.h>
 #include "pci.h"
 
 #define XQUAD_PORTIO_BASE 0xfe400000
 #define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
 
-int mp_bus_id_to_node[MAX_MP_BUSSES];
 #define BUS2QUAD(global) (mp_bus_id_to_node[global])
 
-int mp_bus_id_to_local[MAX_MP_BUSSES];
 #define BUS2LOCAL(global) (mp_bus_id_to_local[global])
 
-void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
-	struct mpc_config_translation *translation)
-{
-	int quad = translation->trans_quad;
-	int local = translation->trans_local;
-
-	mp_bus_id_to_node[m->mpc_busid] = quad;
-	mp_bus_id_to_local[m->mpc_busid] = local;
-	printk(KERN_INFO "Bus #%d is %s (node %d)\n",
-	       m->mpc_busid, name, quad);
-}
-
-int quad_local_to_mp_bus_id [NR_CPUS/4][4];
 #define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
-void mpc_oem_pci_bus(struct mpc_config_bus *m,
-	struct mpc_config_translation *translation)
-{
-	int quad = translation->trans_quad;
-	int local = translation->trans_local;
-
-	quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
-}
 
 /* Where the IO area was mapped on multiquad, always 0 otherwise */
 void *xquad_portio;
-#ifdef CONFIG_X86_NUMAQ
 EXPORT_SYMBOL(xquad_portio);
-#endif
 
 #define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
 
Index: linux-2.6/include/asm-x86/mach-generic/mach_mpparse.h
===================================================================
--- linux-2.6.orig/include/asm-x86/mach-generic/mach_mpparse.h
+++ linux-2.6/include/asm-x86/mach-generic/mach_mpparse.h
@@ -1,7 +1,10 @@
 #ifndef _MACH_MPPARSE_H
 #define _MACH_MPPARSE_H 1
 
-int mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid); 
-int acpi_madt_oem_check(char *oem_id, char *oem_table_id); 
+
+extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
+			 char *productid);
+
+extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
 
 #endif
Index: linux-2.6/include/asm-x86/mach-numaq/mach_apic.h
===================================================================
--- linux-2.6.orig/include/asm-x86/mach-numaq/mach_apic.h
+++ linux-2.6/include/asm-x86/mach-numaq/mach_apic.h
@@ -20,8 +20,14 @@ static inline cpumask_t target_cpus(void
 #define INT_DELIVERY_MODE dest_LowestPrio
 #define INT_DEST_MODE 0     /* physical delivery on LOCAL quad */
  
-#define check_apicid_used(bitmap, apicid) physid_isset(apicid, bitmap)
-#define check_apicid_present(bit) physid_isset(bit, phys_cpu_present_map)
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return physid_isset(apicid, bitmap);
+}
+static inline unsigned long check_apicid_present(int bit)
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
 #define apicid_cluster(apicid) (apicid & 0xF0)
 
 static inline int apic_id_registered(void)
@@ -77,11 +83,6 @@ static inline int cpu_present_to_apicid(
 		return BAD_APICID;
 }
 
-static inline int generate_logical_apicid(int quad, int phys_apicid)
-{
-	return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
-}
-
 static inline int apicid_to_node(int logical_apicid) 
 {
 	return logical_apicid >> 4;
@@ -95,30 +96,6 @@ static inline physid_mask_t apicid_to_cp
 	return physid_mask_of_physid(cpu + 4*node);
 }
 
-struct mpc_config_translation {
-	unsigned char mpc_type;
-	unsigned char trans_len;
-	unsigned char trans_type;
-	unsigned char trans_quad;
-	unsigned char trans_global;
-	unsigned char trans_local;
-	unsigned short trans_reserved;
-};
-
-static inline int mpc_apic_id(struct mpc_config_processor *m, 
-			struct mpc_config_translation *translation_record)
-{
-	int quad = translation_record->trans_quad;
-	int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
-
-	printk("Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
-	       m->mpc_apicid,
-	       (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
-	       (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
-	       m->mpc_apicver, quad, logical_apicid);
-	return logical_apicid;
-}
-
 extern void *xquad_portio;
 
 static inline void setup_portio_remap(void)
Index: linux-2.6/include/asm-x86/mach-numaq/mach_mpparse.h
===================================================================
--- linux-2.6.orig/include/asm-x86/mach-numaq/mach_mpparse.h
+++ linux-2.6/include/asm-x86/mach-numaq/mach_mpparse.h
@@ -1,14 +1,7 @@
 #ifndef __ASM_MACH_MPPARSE_H
 #define __ASM_MACH_MPPARSE_H
 
-extern void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
-			     struct mpc_config_translation *translation);
-extern void mpc_oem_pci_bus(struct mpc_config_bus *m,
-	struct mpc_config_translation *translation);
-
-/* Hook from generic ACPI tables.c */
-static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-}
+extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
+				char *productid);
 
 #endif /* __ASM_MACH_MPPARSE_H */
Index: linux-2.6/include/asm-x86/mmzone_32.h
===================================================================
--- linux-2.6.orig/include/asm-x86/mmzone_32.h
+++ linux-2.6/include/asm-x86/mmzone_32.h
@@ -12,11 +12,9 @@
 extern struct pglist_data *node_data[];
 #define NODE_DATA(nid)	(node_data[nid])
 
-#ifdef CONFIG_X86_NUMAQ
-	#include <asm/numaq.h>
-#elif defined(CONFIG_ACPI_SRAT)/* summit or generic arch */
-	#include <asm/srat.h>
-#endif
+#include <asm/numaq.h>
+/* summit or generic arch */
+#include <asm/srat.h>
 
 extern int get_memcfg_numa_flat(void);
 /*
@@ -26,14 +24,11 @@ extern int get_memcfg_numa_flat(void);
  */
 static inline void get_memcfg_numa(void)
 {
-#ifdef CONFIG_X86_NUMAQ
+
 	if (get_memcfg_numaq())
 		return;
-#elif defined(CONFIG_ACPI_SRAT)
 	if (get_memcfg_from_srat())
 		return;
-#endif
-
 	get_memcfg_numa_flat();
 }
 
@@ -42,7 +37,6 @@ extern int early_pfn_to_nid(unsigned lon
 #else /* !CONFIG_NUMA */
 
 #define get_memcfg_numa get_memcfg_numa_flat
-#define get_zholes_size(n) (0)
 
 #endif /* CONFIG_NUMA */
 
@@ -83,9 +77,6 @@ static inline int pfn_to_nid(unsigned lo
 	__pgdat->node_start_pfn + __pgdat->node_spanned_pages;		\
 })
 
-#ifdef CONFIG_X86_NUMAQ            /* we have contiguous memory on NUMA-Q */
-#define pfn_valid(pfn)          ((pfn) < num_physpages)
-#else
 static inline int pfn_valid(int pfn)
 {
 	int nid = pfn_to_nid(pfn);
@@ -94,7 +85,6 @@ static inline int pfn_valid(int pfn)
 		return (pfn < node_end_pfn(nid));
 	return 0;
 }
-#endif /* CONFIG_X86_NUMAQ */
 
 #endif /* CONFIG_DISCONTIGMEM */
 
Index: linux-2.6/include/asm-x86/numaq.h
===================================================================
--- linux-2.6.orig/include/asm-x86/numaq.h
+++ linux-2.6/include/asm-x86/numaq.h
@@ -157,9 +157,10 @@ struct sys_cfg_data {
 	struct		eachquadmem eq[MAX_NUMNODES];	/* indexed by quad id */
 };
 
-static inline unsigned long *get_zholes_size(int nid)
+#else
+static inline int get_memcfg_numaq(void)
 {
-	return NULL;
+	return 0;
 }
 #endif /* CONFIG_X86_NUMAQ */
 #endif /* NUMAQ_H */
Index: linux-2.6/include/asm-x86/srat.h
===================================================================
--- linux-2.6.orig/include/asm-x86/srat.h
+++ linux-2.6/include/asm-x86/srat.h
@@ -27,11 +27,13 @@
 #ifndef _ASM_SRAT_H_
 #define _ASM_SRAT_H_
 
-#ifndef CONFIG_ACPI_SRAT
-#error CONFIG_ACPI_SRAT not defined, and srat.h header has been included
-#endif
-
+#ifdef CONFIG_ACPI_SRAT
 extern int get_memcfg_from_srat(void);
-extern unsigned long *get_zholes_size(int);
+#else
+static inline int get_memcfg_from_srat(void)
+{
+	return 0;
+}
+#endif
 
 #endif /* _ASM_SRAT_H_ */
Index: linux-2.6/arch/x86/mach-generic/numaq.c
===================================================================
--- /dev/null
+++ linux-2.6/arch/x86/mach-generic/numaq.c
@@ -0,0 +1,41 @@
+/*
+ * APIC driver for the IBM NUMAQ chipset.
+ */
+#define APIC_DEFINITION 1
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/smp.h>
+#include <asm/mpspec.h>
+#include <asm/genapic.h>
+#include <asm/fixmap.h>
+#include <asm/apicdef.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <asm/mach-numaq/mach_apic.h>
+#include <asm/mach-numaq/mach_apicdef.h>
+#include <asm/mach-numaq/mach_ipi.h>
+#include <asm/mach-numaq/mach_mpparse.h>
+#include <asm/mach-numaq/mach_wakecpu.h>
+#include <asm/numaq.h>
+
+static int mps_oem_check(struct mp_config_table *mpc, char *oem,
+		char *productid)
+{
+	numaq_mps_oem_check(mpc, oem, productid);
+	return found_numaq;
+}
+
+static int probe_numaq(void)
+{
+	/* already know from get_memcfg_numaq() */
+	return found_numaq;
+}
+
+/* Hook from generic ACPI tables.c */
+static int acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	return 0;
+}
+
+struct genapic apic_numaq = APIC_INIT("NUMAQ", probe_numaq);
Index: linux-2.6/arch/x86/kernel/apic_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic_32.c
+++ linux-2.6/arch/x86/kernel/apic_32.c
@@ -1528,7 +1528,7 @@ void __cpuinit generic_processor_info(in
 	 * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
 	 *       - Ashok Raj <ashok.raj@intel.com>
 	 */
-	if (num_processors > 8) {
+	if (apicid > 8) {
 		switch (boot_cpu_data.x86_vendor) {
 		case X86_VENDOR_INTEL:
 			if (!APIC_XAPIC(version)) {
Index: linux-2.6/arch/x86/mach-generic/bigsmp.c
===================================================================
--- linux-2.6.orig/arch/x86/mach-generic/bigsmp.c
+++ linux-2.6/arch/x86/mach-generic/bigsmp.c
@@ -48,7 +48,7 @@ static const struct dmi_system_id bigsmp
 static int probe_bigsmp(void)
 {
 	if (def_to_bigsmp)
-	dmi_bigsmp = 1;
+		dmi_bigsmp = 1;
 	else
 		dmi_check_system(bigsmp_dmi_table);
 	return dmi_bigsmp;
Index: linux-2.6/drivers/acpi/Kconfig
===================================================================
--- linux-2.6.orig/drivers/acpi/Kconfig
+++ linux-2.6/drivers/acpi/Kconfig
@@ -4,7 +4,6 @@
 
 menuconfig ACPI
 	bool "ACPI (Advanced Configuration and Power Interface) Support"
-	depends on !X86_NUMAQ
 	depends on !X86_VISWS
 	depends on !IA64_HP_SIM
 	depends on IA64 || X86
Index: linux-2.6/include/asm-x86/mpspec.h
===================================================================
--- linux-2.6.orig/include/asm-x86/mpspec.h
+++ linux-2.6/include/asm-x86/mpspec.h
@@ -13,6 +13,12 @@ extern int apic_version[MAX_APICS];
 extern u8 apicid_2_node[];
 extern int pic_mode;
 
+#ifdef CONFIG_X86_NUMAQ
+extern int mp_bus_id_to_node[MAX_MP_BUSSES];
+extern int mp_bus_id_to_local[MAX_MP_BUSSES];
+extern int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+#endif
+
 #define MAX_APICID 256
 
 #else
Index: linux-2.6/arch/x86/kernel/summit_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/summit_32.c
+++ linux-2.6/arch/x86/kernel/summit_32.c
@@ -36,7 +36,9 @@ static struct rio_table_hdr *rio_table_h
 static struct scal_detail   *scal_devs[MAX_NUMNODES] __initdata;
 static struct rio_detail    *rio_devs[MAX_NUMNODES*4] __initdata;
 
+#ifndef CONFIG_X86_NUMAQ
 static int mp_bus_id_to_node[MAX_MP_BUSSES] __initdata;
+#endif
 
 static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
 {