From: Alan Cox <alan@lxorguk.ukuu.org.uk>
To: linux-kernel@vger.kernel.org
Subject: [PATCH 11/70] isicom: use tty_port
Date: Fri, 20 Jun 2008 20:59:36 +0100 [thread overview]
Message-ID: <20080620195935.1479.58817.stgit@localhost.localdomain> (raw)
In-Reply-To: <20080620195406.1479.12620.stgit@localhost.localdomain>
From: Alan Cox <alan@redhat.com>
Switch isicom to use a tty_port structure for some fields
Signed-off-by: Alan Cox <alan@redhat.com>
---
drivers/char/isicom.c | 181 +++++++++++++++++++++----------------------------
1 files changed, 79 insertions(+), 102 deletions(-)
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index 4f3cefa..20be56f 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -198,17 +198,12 @@ struct isi_board {
struct isi_port {
unsigned short magic;
- unsigned int flags;
- int count;
- int blocked_open;
+ struct tty_port port;
int close_delay;
u16 channel;
u16 status;
u16 closing_wait;
struct isi_board *card;
- struct tty_struct *tty;
- wait_queue_head_t close_wait;
- wait_queue_head_t open_wait;
unsigned char *xmit_buf;
int xmit_head;
int xmit_tail;
@@ -430,11 +425,11 @@ static void isicom_tx(unsigned long _data)
for (; count > 0; count--, port++) {
/* port not active or tx disabled to force flow control */
- if (!(port->flags & ASYNC_INITIALIZED) ||
+ if (!(port->port.flags & ASYNC_INITIALIZED) ||
!(port->status & ISI_TXOK))
continue;
- tty = port->tty;
+ tty = port->port.tty;
if (tty == NULL)
continue;
@@ -458,7 +453,7 @@ static void isicom_tx(unsigned long _data)
if (residue == YES) {
residue = NO;
if (cnt > 0) {
- wrd |= (port->xmit_buf[port->xmit_tail]
+ wrd |= (port->port.xmit_buf[port->xmit_tail]
<< 8);
port->xmit_tail = (port->xmit_tail + 1)
& (SERIAL_XMIT_SIZE - 1);
@@ -474,14 +469,14 @@ static void isicom_tx(unsigned long _data)
if (cnt <= 0)
break;
word_count = cnt >> 1;
- outsw(base, port->xmit_buf+port->xmit_tail, word_count);
+ outsw(base, port->port.xmit_buf+port->xmit_tail, word_count);
port->xmit_tail = (port->xmit_tail
+ (word_count << 1)) & (SERIAL_XMIT_SIZE - 1);
txcount -= (word_count << 1);
port->xmit_cnt -= (word_count << 1);
if (cnt & 0x0001) {
residue = YES;
- wrd = port->xmit_buf[port->xmit_tail];
+ wrd = port->port.xmit_buf[port->xmit_tail];
port->xmit_tail = (port->xmit_tail + 1)
& (SERIAL_XMIT_SIZE - 1);
port->xmit_cnt--;
@@ -548,13 +543,13 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
port = card->ports + channel;
- if (!(port->flags & ASYNC_INITIALIZED)) {
+ if (!(port->port.flags & ASYNC_INITIALIZED)) {
outw(0x0000, base+0x04); /* enable interrupts */
spin_unlock(&card->card_lock);
return IRQ_HANDLED;
}
- tty = port->tty;
+ tty = port->port.tty;
if (tty == NULL) {
word_count = byte_count >> 1;
while (byte_count > 1) {
@@ -572,7 +567,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
header = inw(base);
switch (header & 0xff) {
case 0: /* Change in EIA signals */
- if (port->flags & ASYNC_CHECK_CD) {
+ if (port->port.flags & ASYNC_CHECK_CD) {
if (port->status & ISI_DCD) {
if (!(header & ISI_DCD)) {
/* Carrier has been lost */
@@ -585,7 +580,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
/* Carrier has been detected */
pr_dbg("interrupt: DCD->high.\n");
port->status |= ISI_DCD;
- wake_up_interruptible(&port->open_wait);
+ wake_up_interruptible(&port->port.open_wait);
}
} else {
if (header & ISI_DCD)
@@ -594,17 +589,17 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
port->status &= ~ISI_DCD;
}
- if (port->flags & ASYNC_CTS_FLOW) {
- if (port->tty->hw_stopped) {
+ if (port->port.flags & ASYNC_CTS_FLOW) {
+ if (port->port.tty->hw_stopped) {
if (header & ISI_CTS) {
- port->tty->hw_stopped = 0;
+ port->port.tty->hw_stopped = 0;
/* start tx ing */
port->status |= (ISI_TXOK
| ISI_CTS);
tty_wakeup(tty);
}
} else if (!(header & ISI_CTS)) {
- port->tty->hw_stopped = 1;
+ port->port.tty->hw_stopped = 1;
/* stop tx ing */
port->status &= ~(ISI_TXOK | ISI_CTS);
}
@@ -629,7 +624,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
case 1: /* Received Break !!! */
tty_insert_flip_char(tty, 0, TTY_BREAK);
- if (port->flags & ASYNC_SAK)
+ if (port->port.flags & ASYNC_SAK)
do_SAK(tty);
tty_flip_buffer_push(tty);
break;
@@ -681,7 +676,7 @@ static void isicom_config_port(struct isi_port *port)
shift_count = card->shift_count;
unsigned char flow_ctrl;
- tty = port->tty;
+ tty = port->port.tty;
if (tty == NULL)
return;
@@ -697,7 +692,7 @@ static void isicom_config_port(struct isi_port *port)
/* 1,2,3,4 => 57.6, 115.2, 230, 460 kbps resp. */
if (baud < 1 || baud > 4)
- port->tty->termios->c_cflag &= ~CBAUDEX;
+ port->port.tty->termios->c_cflag &= ~CBAUDEX;
else
baud += 15;
}
@@ -708,13 +703,13 @@ static void isicom_config_port(struct isi_port *port)
* the 'setserial' utility.
*/
- if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
baud++; /* 57.6 Kbps */
- if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
baud += 2; /* 115 Kbps */
- if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
baud += 3; /* 230 kbps*/
- if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
baud += 4; /* 460 kbps*/
}
if (linuxb_to_isib[baud] == -1) {
@@ -754,15 +749,15 @@ static void isicom_config_port(struct isi_port *port)
InterruptTheCard(base);
}
if (C_CLOCAL(tty))
- port->flags &= ~ASYNC_CHECK_CD;
+ port->port.flags &= ~ASYNC_CHECK_CD;
else
- port->flags |= ASYNC_CHECK_CD;
+ port->port.flags |= ASYNC_CHECK_CD;
/* flow control settings ...*/
flow_ctrl = 0;
- port->flags &= ~ASYNC_CTS_FLOW;
+ port->port.flags &= ~ASYNC_CTS_FLOW;
if (C_CRTSCTS(tty)) {
- port->flags |= ASYNC_CTS_FLOW;
+ port->port.flags |= ASYNC_CTS_FLOW;
flow_ctrl |= ISICOM_CTSRTS;
}
if (I_IXON(tty))
@@ -809,23 +804,15 @@ static int isicom_setup_port(struct isi_port *port)
struct isi_board *card = port->card;
unsigned long flags;
- if (port->flags & ASYNC_INITIALIZED)
+ if (port->port.flags & ASYNC_INITIALIZED)
return 0;
- if (!port->xmit_buf) {
- /* Relies on BKL */
- unsigned long page = get_zeroed_page(GFP_KERNEL);
- if (page == 0)
- return -ENOMEM;
- if (port->xmit_buf)
- free_page(page);
- else
- port->xmit_buf = (unsigned char *) page;
- }
+ if (tty_port_alloc_xmit_buf(&port->port) < 0)
+ return -ENOMEM;
spin_lock_irqsave(&card->card_lock, flags);
- if (port->tty)
- clear_bit(TTY_IO_ERROR, &port->tty->flags);
- if (port->count == 1)
+ if (port->port.tty)
+ clear_bit(TTY_IO_ERROR, &port->port.tty->flags);
+ if (port->port.count == 1)
card->count++;
port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
@@ -839,7 +826,7 @@ static int isicom_setup_port(struct isi_port *port)
}
isicom_config_port(port);
- port->flags |= ASYNC_INITIALIZED;
+ port->port.flags |= ASYNC_INITIALIZED;
spin_unlock_irqrestore(&card->card_lock, flags);
return 0;
@@ -855,10 +842,10 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
/* block if port is in the process of being closed */
- if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
+ if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) {
pr_dbg("block_til_ready: close in progress.\n");
- interruptible_sleep_on(&port->close_wait);
- if (port->flags & ASYNC_HUP_NOTIFY)
+ interruptible_sleep_on(&port->port.close_wait);
+ if (port->port.flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
else
return -ERESTARTSYS;
@@ -869,7 +856,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
if ((filp->f_flags & O_NONBLOCK) ||
(tty->flags & (1 << TTY_IO_ERROR))) {
pr_dbg("block_til_ready: non-block mode.\n");
- port->flags |= ASYNC_NORMAL_ACTIVE;
+ port->port.flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -879,26 +866,26 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
/* block waiting for DCD to be asserted, and while
callout dev is busy */
retval = 0;
- add_wait_queue(&port->open_wait, &wait);
+ add_wait_queue(&port->port.open_wait, &wait);
spin_lock_irqsave(&card->card_lock, flags);
if (!tty_hung_up_p(filp))
- port->count--;
- port->blocked_open++;
+ port->port.count--;
+ port->port.blocked_open++;
spin_unlock_irqrestore(&card->card_lock, flags);
while (1) {
raise_dtr_rts(port);
set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) {
- if (port->flags & ASYNC_HUP_NOTIFY)
+ if (tty_hung_up_p(filp) || !(port->port.flags & ASYNC_INITIALIZED)) {
+ if (port->port.flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
retval = -ERESTARTSYS;
break;
}
- if (!(port->flags & ASYNC_CLOSING) &&
+ if (!(port->port.flags & ASYNC_CLOSING) &&
(do_clocal || (port->status & ISI_DCD))) {
break;
}
@@ -909,15 +896,15 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
schedule();
}
set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->open_wait, &wait);
+ remove_wait_queue(&port->port.open_wait, &wait);
spin_lock_irqsave(&card->card_lock, flags);
if (!tty_hung_up_p(filp))
- port->count++;
- port->blocked_open--;
+ port->port.count++;
+ port->port.blocked_open--;
spin_unlock_irqrestore(&card->card_lock, flags);
if (retval)
return retval;
- port->flags |= ASYNC_NORMAL_ACTIVE;
+ port->port.flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -947,9 +934,9 @@ static int isicom_open(struct tty_struct *tty, struct file *filp)
isicom_setup_board(card);
- port->count++;
+ port->port.count++;
tty->driver_data = port;
- port->tty = tty;
+ port->port.tty = tty;
error = isicom_setup_port(port);
if (error == 0)
error = block_til_ready(tty, filp, port);
@@ -970,18 +957,15 @@ static void isicom_shutdown_port(struct isi_port *port)
struct isi_board *card = port->card;
struct tty_struct *tty;
- tty = port->tty;
+ tty = port->port.tty;
- if (!(port->flags & ASYNC_INITIALIZED))
+ if (!(port->port.flags & ASYNC_INITIALIZED))
return;
- if (port->xmit_buf) {
- free_page((unsigned long) port->xmit_buf);
- port->xmit_buf = NULL;
- }
- port->flags &= ~ASYNC_INITIALIZED;
+ tty_port_free_xmit_buf(&port->port);
+ port->port.flags &= ~ASYNC_INITIALIZED;
/* 3rd October 2000 : Vinayak P Risbud */
- port->tty = NULL;
+ port->port.tty = NULL;
/*Fix done by Anil .S on 30-04-2001
remote login through isi port has dtr toggle problem
@@ -1046,24 +1030,24 @@ static void isicom_close(struct tty_struct *tty, struct file *filp)
return;
}
- if (tty->count == 1 && port->count != 1) {
+ if (tty->count == 1 && port->port.count != 1) {
printk(KERN_WARNING "ISICOM:(0x%lx) isicom_close: bad port "
"count tty->count = 1 port count = %d.\n",
- card->base, port->count);
- port->count = 1;
+ card->base, port->port.count);
+ port->port.count = 1;
}
- if (--port->count < 0) {
+ if (--port->port.count < 0) {
printk(KERN_WARNING "ISICOM:(0x%lx) isicom_close: bad port "
"count for channel%d = %d", card->base, port->channel,
- port->count);
- port->count = 0;
+ port->port.count);
+ port->port.count = 0;
}
- if (port->count) {
+ if (port->port.count) {
spin_unlock_irqrestore(&card->card_lock, flags);
return;
}
- port->flags |= ASYNC_CLOSING;
+ port->port.flags |= ASYNC_CLOSING;
tty->closing = 1;
spin_unlock_irqrestore(&card->card_lock, flags);
@@ -1072,7 +1056,7 @@ static void isicom_close(struct tty_struct *tty, struct file *filp)
/* indicate to the card that no more data can be received
on this port */
spin_lock_irqsave(&card->card_lock, flags);
- if (port->flags & ASYNC_INITIALIZED) {
+ if (port->port.flags & ASYNC_INITIALIZED) {
card->port_status &= ~(1 << port->channel);
outw(card->port_status, card->base + 0x02);
}
@@ -1085,7 +1069,7 @@ static void isicom_close(struct tty_struct *tty, struct file *filp)
spin_lock_irqsave(&card->card_lock, flags);
tty->closing = 0;
- if (port->blocked_open) {
+ if (port->port.blocked_open) {
spin_unlock_irqrestore(&card->card_lock, flags);
if (port->close_delay) {
pr_dbg("scheduling until time out.\n");
@@ -1093,10 +1077,10 @@ static void isicom_close(struct tty_struct *tty, struct file *filp)
jiffies_to_msecs(port->close_delay));
}
spin_lock_irqsave(&card->card_lock, flags);
- wake_up_interruptible(&port->open_wait);
+ wake_up_interruptible(&port->port.open_wait);
}
- port->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
- wake_up_interruptible(&port->close_wait);
+ port->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
+ wake_up_interruptible(&port->port.close_wait);
spin_unlock_irqrestore(&card->card_lock, flags);
}
@@ -1112,9 +1096,6 @@ static int isicom_write(struct tty_struct *tty, const unsigned char *buf,
if (isicom_paranoia_check(port, tty->name, "isicom_write"))
return 0;
- if (!port->xmit_buf)
- return 0;
-
spin_lock_irqsave(&card->card_lock, flags);
while (1) {
@@ -1123,7 +1104,7 @@ static int isicom_write(struct tty_struct *tty, const unsigned char *buf,
if (cnt <= 0)
break;
- memcpy(port->xmit_buf + port->xmit_head, buf, cnt);
+ memcpy(port->port.xmit_buf + port->xmit_head, buf, cnt);
port->xmit_head = (port->xmit_head + cnt) & (SERIAL_XMIT_SIZE
- 1);
port->xmit_cnt += cnt;
@@ -1147,16 +1128,13 @@ static int isicom_put_char(struct tty_struct *tty, unsigned char ch)
if (isicom_paranoia_check(port, tty->name, "isicom_put_char"))
return 0;
- if (!port->xmit_buf)
- return 0;
-
spin_lock_irqsave(&card->card_lock, flags);
if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) {
spin_unlock_irqrestore(&card->card_lock, flags);
return 0;
}
- port->xmit_buf[port->xmit_head++] = ch;
+ port->port.xmit_buf[port->xmit_head++] = ch;
port->xmit_head &= (SERIAL_XMIT_SIZE - 1);
port->xmit_cnt++;
spin_unlock_irqrestore(&card->card_lock, flags);
@@ -1172,7 +1150,7 @@ static void isicom_flush_chars(struct tty_struct *tty)
return;
if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
- !port->xmit_buf)
+ !port->port.xmit_buf)
return;
/* this tells the transmitter to consider this port for
@@ -1274,23 +1252,23 @@ static int isicom_set_serial_info(struct isi_port *port,
lock_kernel();
- reconfig_port = ((port->flags & ASYNC_SPD_MASK) !=
+ reconfig_port = ((port->port.flags & ASYNC_SPD_MASK) !=
(newinfo.flags & ASYNC_SPD_MASK));
if (!capable(CAP_SYS_ADMIN)) {
if ((newinfo.close_delay != port->close_delay) ||
(newinfo.closing_wait != port->closing_wait) ||
((newinfo.flags & ~ASYNC_USR_MASK) !=
- (port->flags & ~ASYNC_USR_MASK))) {
+ (port->port.flags & ~ASYNC_USR_MASK))) {
unlock_kernel();
return -EPERM;
}
- port->flags = ((port->flags & ~ASYNC_USR_MASK) |
+ port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
(newinfo.flags & ASYNC_USR_MASK));
} else {
port->close_delay = newinfo.close_delay;
port->closing_wait = newinfo.closing_wait;
- port->flags = ((port->flags & ~ASYNC_FLAGS) |
+ port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) |
(newinfo.flags & ASYNC_FLAGS));
}
if (reconfig_port) {
@@ -1314,7 +1292,7 @@ static int isicom_get_serial_info(struct isi_port *port,
out_info.line = port - isi_ports;
out_info.port = port->card->base;
out_info.irq = port->card->irq;
- out_info.flags = port->flags;
+ out_info.flags = port->port.flags;
/* out_info.baud_base = ? */
out_info.close_delay = port->close_delay;
out_info.closing_wait = port->closing_wait;
@@ -1454,10 +1432,10 @@ static void isicom_hangup(struct tty_struct *tty)
isicom_shutdown_port(port);
spin_unlock_irqrestore(&port->card->card_lock, flags);
- port->count = 0;
- port->flags &= ~ASYNC_NORMAL_ACTIVE;
- port->tty = NULL;
- wake_up_interruptible(&port->open_wait);
+ port->port.count = 0;
+ port->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+ port->port.tty = NULL;
+ wake_up_interruptible(&port->port.open_wait);
}
@@ -1824,8 +1802,7 @@ static int __init isicom_init(void)
port->close_delay = 50 * HZ/100;
port->closing_wait = 3000 * HZ/100;
port->status = 0;
- init_waitqueue_head(&port->open_wait);
- init_waitqueue_head(&port->close_wait);
+ tty_port_init(&port->port);
/* . . . */
}
isi_card[idx].base = 0;
next prev parent reply other threads:[~2008-06-20 20:19 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-20 19:57 [PATCH 00/70] tty updates proposed for 2.6.27 Alan Cox
2008-06-20 19:58 ` [PATCH 01/70] tty: Ldisc revamp Alan Cox
2008-06-23 13:39 ` Louis Rilling
2008-06-23 14:11 ` Alan Cox
2008-06-20 19:58 ` [PATCH 02/70] drivers/char/rio/: remove VCS tags Alan Cox
2008-06-20 19:58 ` [PATCH 03/70] drivers/serial/: remove CVS keywords Alan Cox
2008-06-20 19:58 ` [PATCH 04/70] tty: Introduce a tty_port common structure Alan Cox
2008-06-20 19:58 ` [PATCH 05/70] tty.h: clean up Alan Cox
2008-06-20 19:59 ` [PATCH 06/70] epca: use tty_port Alan Cox
2008-06-20 19:59 ` [PATCH 07/70] esp: " Alan Cox
2008-06-20 19:59 ` [PATCH 08/70] gs: " Alan Cox
2008-06-20 19:59 ` [PATCH 09/70] riscom8: " Alan Cox
2008-06-20 19:59 ` [PATCH 10/70] riscom8: remove bogus checks Alan Cox
2008-06-20 19:59 ` Alan Cox [this message]
2008-06-20 19:59 ` [PATCH 12/70] istallion: use tty_port Alan Cox
2008-06-20 19:59 ` [PATCH 13/70] moxa: " Alan Cox
2008-06-20 19:59 ` [PATCH 14/70] mxser: " Alan Cox
2008-06-20 20:00 ` [PATCH 15/70] rocket: " Alan Cox
2008-06-20 20:00 ` [PATCH 16/70] serial: " Alan Cox
2008-06-20 20:00 ` [PATCH 17/70] stallion: " Alan Cox
2008-06-20 20:00 ` [PATCH 18/70] synclink: " Alan Cox
2008-06-20 20:00 ` [PATCH 19/70] tty: Clean up tiocmset Alan Cox
2008-06-20 20:00 ` [PATCH 20/70] cyclades: use tty_port Alan Cox
2008-06-20 20:00 ` [PATCH 21/70] termios: Termios defines for other platforms Alan Cox
2008-06-20 20:00 ` [PATCH 22/70] tty: add more tty_port fields Alan Cox
2008-06-20 20:01 ` [PATCH 24/70] whiteheat: coding style Alan Cox
2008-06-20 20:01 ` [PATCH 25/70] whiteheat: fix bugs found in the tidy and audit Alan Cox
2008-06-20 20:01 ` [PATCH 26/70] belkin_sa: clean up code Alan Cox
2008-06-20 20:01 ` [PATCH 27/70] usb-serial-bus: tidy coding style Alan Cox
2008-06-20 20:01 ` [PATCH 28/70] tty-usb-console: tidy the USB console code Alan Cox
2008-06-20 20:01 ` [PATCH 29/70] tty-usb-console: Fix termios Alan Cox
2008-06-20 20:02 ` [PATCH 30/70] cp2101: coding style Alan Cox
2008-06-20 20:02 ` [PATCH 31/70] cyberjack: Coding style Alan Cox
2008-06-20 20:02 ` [PATCH 32/70] cypress_m8: coding style Alan Cox
2008-06-20 20:02 ` [PATCH 33/70] usb-cypress: There is no 0 case to go with CS5/6/7/8 so remove the test Alan Cox
2008-06-20 20:02 ` [PATCH 34/70] digi_acceleport: coding style Alan Cox
2008-06-20 20:02 ` [PATCH 35/70] empeg: Coding style Alan Cox
2008-06-20 20:02 ` [PATCH 36/70] ftdi_sio: " Alan Cox
2008-06-20 20:02 ` [PATCH 37/70] funsoft: Switch to linux/uaccess Alan Cox
2008-06-20 20:03 ` [PATCH 38/70] garmin_gps: Coding style Alan Cox
2008-06-20 20:03 ` [PATCH 39/70] tty-usb-generic: Code cleanup Alan Cox
2008-06-20 20:03 ` [PATCH 40/70] tty-usb-hp4x: Fix overlong line Alan Cox
2008-06-20 20:03 ` [PATCH 41/70] tty-usb-visor: Coding style Alan Cox
2008-06-20 20:03 ` [PATCH 42/70] tty-usb-io_edgeport: " Alan Cox
2008-06-20 20:03 ` [PATCH 43/70] io_edgeport: Fix various bogus returns to the tty layer Alan Cox
2008-06-20 20:03 ` [PATCH 44/70] usb-serial: Coding style Alan Cox
2008-06-20 20:04 ` [PATCH 45/70] io_ti: Minor coding style Alan Cox
2008-06-20 20:04 ` [PATCH 46/70] ipaq: Coding style Alan Cox
2008-06-20 20:04 ` [PATCH 47/70] tty-usb-ipw: " Alan Cox
2008-06-20 20:04 ` [PATCH 48/70] tty-usb-ir-usb: Clean up to coding style Alan Cox
2008-06-20 20:04 ` [PATCH 49/70] tty-usb-iuu-phoenix: " Alan Cox
2008-06-20 20:04 ` [PATCH 50/70] tty-usb-keyspan: Coding style Alan Cox
2008-06-20 20:04 ` [PATCH 51/70] keyspan: Use string flip functions when possible Alan Cox
2008-06-20 20:04 ` [PATCH 52/70] tty-usb-keyspan-pda: Coding style Alan Cox
2008-06-20 20:05 ` [PATCH 53/70] tty-usb-kl5kusb105: " Alan Cox
2008-06-20 20:05 ` [PATCH 54/70] keyspan_pda: Use string flip functions Alan Cox
2008-06-20 20:05 ` [PATCH 55/70] tty-usb-kobil-sct: Coding style Alan Cox
2008-06-20 20:05 ` [PATCH 56/70] kobil_sct: Fix ioctls Alan Cox
2008-06-20 20:05 ` [PATCH 57/70] tty-usb-mct-u232: Coding style Alan Cox
2008-06-20 20:05 ` [PATCH 58/70] mct_u232: Use flip buffer functions Alan Cox
2008-06-20 20:06 ` [PATCH 59/70] tty-usb-pl2303: Coding style Alan Cox
2008-06-20 20:06 ` [PATCH 60/70] tty-usb-sierra: Coding style - minor Alan Cox
2008-06-20 20:06 ` [PATCH 61/70] tty-usb-spcp8x5: Minor coding style Alan Cox
2008-06-20 20:06 ` [PATCH 62/70] tty-usb-ti-usb: Coding style Alan Cox
2008-06-20 20:06 ` [PATCH 63/70] tty-usb-safe-serial: " Alan Cox
2008-06-20 20:06 ` [PATCH 64/70] tty-usb-oti6858: " Alan Cox
2008-06-20 20:06 ` [PATCH 65/70] tty-usb-option: " Alan Cox
2008-06-20 20:06 ` [PATCH 66/70] tty-usb-omninet: " Alan Cox
2008-06-20 20:07 ` [PATCH 67/70] omninet: Use string flip functions Alan Cox
2008-06-20 20:07 ` [PATCH 68/70] mos7840: remove loads of bogus assignments to status Alan Cox
2008-06-20 20:07 ` [PATCH 69/70] whiteheat: remove unused variable Alan Cox
2008-06-20 20:07 ` [PATCH 70/70] tty-usb-mos7720: Coding style Alan Cox
2008-06-20 23:39 ` [PATCH 00/70] tty updates proposed for 2.6.27 Johannes Weiner
2008-06-21 9:09 ` Greg KH
2008-06-21 10:17 ` (Resend of 23/70 plus reply [PATCH 00/70] tty updates proposed for 2.6.27) Alan Cox
2008-06-21 11:19 ` Adrian Bunk
2008-06-22 17:07 ` Alan Cox
2008-06-22 18:39 ` Greg KH
2008-06-21 13:23 ` [PATCH 00/70] tty updates proposed for 2.6.27 Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080620195935.1479.58817.stgit@localhost.localdomain \
--to=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox