From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 09/18] ide: add ->set_irq method
Date: Fri, 20 Jun 2008 23:34:24 +0200 [thread overview]
Message-ID: <20080620213424.13202.16889.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20080620213323.13202.71450.sendpatchset@localhost.localdomain>
Add ->set_irq method for setting nIEN bit of ATA Device Control
register and use it instead of ide_set_irq().
While at it:
* Use ->set_irq in init_irq() and do_reset1().
* Don't use HWIF() macro in ide_check_pm_state().
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ide-io.c | 14 ++++++++------
drivers/ide/ide-iops.c | 37 +++++++++++++++++++++++++++----------
drivers/ide/ide-probe.c | 9 ++++-----
drivers/ide/ide-taskfile.c | 2 +-
drivers/ide/pci/scc_pata.c | 19 +++++++++++++++++++
drivers/ide/ppc/pmac.c | 17 +++++++++++++++++
include/linux/ide.h | 10 ++--------
7 files changed, 78 insertions(+), 30 deletions(-)
Index: b/drivers/ide/ide-io.c
===================================================================
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -783,16 +783,17 @@ static void ide_check_pm_state(ide_drive
* the bus may be broken enough to walk on our toes at this
* point.
*/
+ ide_hwif_t *hwif = drive->hwif;
int rc;
#ifdef DEBUG_PM
printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
#endif
- rc = ide_wait_not_busy(HWIF(drive), 35000);
+ rc = ide_wait_not_busy(hwif, 35000);
if (rc)
printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
SELECT_DRIVE(drive);
- ide_set_irq(drive, 1);
- rc = ide_wait_not_busy(HWIF(drive), 100000);
+ hwif->set_irq(hwif, 1);
+ rc = ide_wait_not_busy(hwif, 100000);
if (rc)
printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
}
@@ -1069,7 +1070,7 @@ static void ide_do_request (ide_hwgroup_
* quirk_list may not like intr setups/cleanups
*/
if (drive->quirk_list != 1)
- ide_set_irq(drive, 0);
+ hwif->set_irq(hwif, 0);
}
hwgroup->hwif = hwif;
hwgroup->drive = drive;
@@ -1547,6 +1548,7 @@ EXPORT_SYMBOL(ide_do_drive_cmd);
void ide_pktcmd_tf_load(ide_drive_t *drive, u32 tf_flags, u16 bcount, u8 dma)
{
+ ide_hwif_t *hwif = drive->hwif;
ide_task_t task;
memset(&task, 0, sizeof(task));
@@ -1557,9 +1559,9 @@ void ide_pktcmd_tf_load(ide_drive_t *dri
task.tf.lbah = (bcount >> 8) & 0xff;
ide_tf_dump(drive->name, &task.tf);
- ide_set_irq(drive, 1);
+ hwif->set_irq(hwif, 1);
SELECT_MASK(drive, 0);
- drive->hwif->tf_load(drive, &task);
+ hwif->tf_load(drive, &task);
}
EXPORT_SYMBOL_GPL(ide_pktcmd_tf_load);
Index: b/drivers/ide/ide-iops.c
===================================================================
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -135,6 +135,23 @@ static u8 ide_read_sff_dma_status(ide_hw
return inb(hwif->dma_base + ATA_DMA_STATUS);
}
+static void ide_set_irq(ide_hwif_t *hwif, int on)
+{
+ u8 ctl = ATA_DEVCTL_OBS;
+
+ if (on == 4) { /* hack for SRST */
+ ctl |= 4;
+ on &= ~4;
+ }
+
+ ctl |= on ? 0 : 2;
+
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
+ writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr);
+ else
+ outb(ctl, hwif->io_ports.ctl_addr);
+}
+
static void ide_tf_load(ide_drive_t *drive, ide_task_t *task)
{
ide_hwif_t *hwif = drive->hwif;
@@ -360,6 +377,8 @@ void default_hwif_transport(ide_hwif_t *
hwif->read_altstatus = ide_read_altstatus;
hwif->read_sff_dma_status = ide_read_sff_dma_status;
+ hwif->set_irq = ide_set_irq;
+
hwif->tf_load = ide_tf_load;
hwif->tf_read = ide_tf_read;
@@ -722,7 +741,7 @@ int ide_driveid_update(ide_drive_t *driv
*/
SELECT_MASK(drive, 1);
- ide_set_irq(drive, 1);
+ hwif->set_irq(hwif, 1);
msleep(50);
hwif->exec_command(hwif, WIN_IDENTIFY);
timeout = jiffies + WAIT_WORSTCASE;
@@ -808,12 +827,12 @@ int ide_config_drive_speed(ide_drive_t *
SELECT_DRIVE(drive);
SELECT_MASK(drive, 0);
udelay(1);
- ide_set_irq(drive, 0);
+ hwif->set_irq(hwif, 0);
hwif->OUTB(speed, io_ports->nsect_addr);
hwif->OUTB(SETFEATURES_XFER, io_ports->feature_addr);
hwif->exec_command(hwif, WIN_SETFEATURES);
if (drive->quirk_list == 2)
- ide_set_irq(drive, 1);
+ hwif->set_irq(hwif, 1);
error = __ide_wait_stat(drive, drive->ready_stat,
BUSY_STAT|DRQ_STAT|ERR_STAT,
@@ -1116,7 +1135,6 @@ static ide_startstop_t do_reset1 (ide_dr
ide_hwgroup_t *hwgroup;
struct ide_io_ports *io_ports;
const struct ide_port_ops *port_ops;
- u8 ctl;
spin_lock_irqsave(&ide_lock, flags);
hwif = HWIF(drive);
@@ -1162,16 +1180,15 @@ static ide_startstop_t do_reset1 (ide_dr
* immediate interrupt due to the edge transition it produces.
* This single interrupt gives us a "fast poll" for drives that
* recover from reset very quickly, saving us the first 50ms wait time.
+ *
+ * TODO: add ->softreset method and stop abusing ->set_irq
*/
/* set SRST and nIEN */
- hwif->OUTBSYNC(hwif, ATA_DEVCTL_OBS | 6, io_ports->ctl_addr);
+ hwif->set_irq(hwif, 4);
/* more than enough time */
udelay(10);
- if (drive->quirk_list == 2)
- ctl = ATA_DEVCTL_OBS; /* clear SRST and nIEN */
- else
- ctl = ATA_DEVCTL_OBS | 2; /* clear SRST, leave nIEN */
- hwif->OUTBSYNC(hwif, ctl, io_ports->ctl_addr);
+ /* clear SRST, leave nIEN (unless device is on the quirk list) */
+ hwif->set_irq(hwif, drive->quirk_list == 2);
/* more than enough time */
udelay(10);
hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE;
Index: b/drivers/ide/ide-probe.c
===================================================================
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -361,7 +361,7 @@ static int try_to_identify (ide_drive_t
autoprobe = 1;
cookie = probe_irq_on();
}
- ide_set_irq(drive, autoprobe);
+ hwif->set_irq(hwif, autoprobe);
}
retval = actual_try_to_identify(drive, cmd);
@@ -369,7 +369,7 @@ static int try_to_identify (ide_drive_t
if (autoprobe) {
int irq;
- ide_set_irq(drive, 0);
+ hwif->set_irq(hwif, 0);
/* clear drive IRQ */
(void)hwif->read_status(hwif);
udelay(5);
@@ -711,7 +711,7 @@ static int ide_port_wait_ready(ide_hwif_
/* Ignore disks that we will not probe for later. */
if (!drive->noprobe || drive->present) {
SELECT_DRIVE(drive);
- ide_set_irq(drive, 1);
+ hwif->set_irq(hwif, 1);
mdelay(2);
rc = ide_wait_not_busy(hwif, 35000);
if (rc)
@@ -1068,8 +1068,7 @@ static int init_irq (ide_hwif_t *hwif)
sa = IRQF_SHARED;
if (io_ports->ctl_addr)
- /* clear nIEN */
- hwif->OUTBSYNC(hwif, ATA_DEVCTL_OBS, io_ports->ctl_addr);
+ hwif->set_irq(hwif, 1);
if (request_irq(hwif->irq,&ide_intr,sa,hwif->name,hwgroup))
goto out_unlink;
Index: b/drivers/ide/ide-taskfile.c
===================================================================
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -79,7 +79,7 @@ ide_startstop_t do_rw_taskfile (ide_driv
if ((task->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) {
ide_tf_dump(drive->name, tf);
- ide_set_irq(drive, 1);
+ hwif->set_irq(hwif, 1);
SELECT_MASK(drive, 0);
hwif->tf_load(drive, task);
}
Index: b/drivers/ide/pci/scc_pata.c
===================================================================
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -149,6 +149,23 @@ static u8 scc_read_sff_dma_status(ide_hw
return (u8)in_be32((void *)(hwif->dma_base + 4));
}
+static void scc_set_irq(ide_hwif_t *hwif, int on)
+{
+ u8 ctl = ATA_DEVCTL_OBS;
+
+ if (on == 4) { /* hack for SRST */
+ ctl |= 4;
+ on &= ~4;
+ }
+
+ ctl |= on ? 0 : 2;
+
+ out_be32((void *)hwif->io_ports.ctl_addr, ctl);
+ eieio();
+ in_be32((void *)(hwif->dma_base + 0x01c));
+ eieio();
+}
+
static void scc_ide_insw(unsigned long port, void *addr, u32 count)
{
u16 *ptr = (u16 *)addr;
@@ -803,6 +820,8 @@ static void __devinit init_mmio_iops_scc
hwif->read_altstatus = scc_read_altstatus;
hwif->read_sff_dma_status = scc_read_sff_dma_status;
+ hwif->set_irq = scc_set_irq;
+
hwif->tf_load = scc_tf_load;
hwif->tf_read = scc_tf_read;
Index: b/drivers/ide/ppc/pmac.c
===================================================================
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -502,6 +502,22 @@ static void pmac_exec_command(ide_hwif_t
+ IDE_TIMING_CONFIG));
}
+static void pmac_set_irq(ide_hwif_t *hwif, int on)
+{
+ u8 ctl = ATA_DEVCTL_OBS;
+
+ if (on == 4) { /* hack for SRST */
+ ctl |= 4;
+ on &= ~4;
+ }
+
+ ctl |= on ? 0 : 2;
+
+ writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr);
+ (void)readl((void __iomem *)(hwif->io_ports.data_addr
+ + IDE_TIMING_CONFIG));
+}
+
/*
* Old tuning functions (called on hdparm -p), sets up drive PIO timings
*/
@@ -1094,6 +1110,7 @@ static int __devinit pmac_ide_setup_devi
return -ENOENT;
hwif->exec_command = pmac_exec_command;
+ hwif->set_irq = pmac_set_irq;
/* Setup MMIO ops */
default_hwif_mmiops(hwif);
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -473,6 +473,8 @@ typedef struct hwif_s {
u8 (*read_altstatus)(struct hwif_s *);
u8 (*read_sff_dma_status)(struct hwif_s *);
+ void (*set_irq)(struct hwif_s *, int);
+
void (*tf_load)(ide_drive_t *, struct ide_task_s *);
void (*tf_read)(ide_drive_t *, struct ide_task_s *);
@@ -1342,14 +1344,6 @@ static inline ide_drive_t *ide_get_paire
return &hwif->drives[(drive->dn ^ 1) & 1];
}
-static inline void ide_set_irq(ide_drive_t *drive, int on)
-{
- ide_hwif_t *hwif = drive->hwif;
-
- hwif->OUTBSYNC(hwif, ATA_DEVCTL_OBS | (on ? 0 : 2),
- hwif->io_ports.ctl_addr);
-}
-
static inline u8 ide_read_error(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
next prev parent reply other threads:[~2008-06-20 21:34 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-20 21:33 [PATCH 01/18] ide: add ->read_sff_dma_status method Bartlomiej Zolnierkiewicz
2008-06-20 21:33 ` [PATCH 02/18] ide: use I/O ops directly in ide-dma.c Bartlomiej Zolnierkiewicz
2008-09-08 15:49 ` Sergei Shtylyov
2008-06-20 21:33 ` [PATCH 03/18] ide: remove ->dma_{status,command} fields from ide_hwif_t Bartlomiej Zolnierkiewicz
2008-06-20 21:33 ` [PATCH 04/18] ide: remove ide_setup_dma() Bartlomiej Zolnierkiewicz
2008-06-20 22:03 ` Sergei Shtylyov
2008-06-21 19:06 ` Bartlomiej Zolnierkiewicz
2008-06-21 19:29 ` Sergei Shtylyov
2008-08-21 17:16 ` Sergei Shtylyov
2008-08-21 17:56 ` Sergei Shtylyov
2008-06-20 21:33 ` [PATCH 05/18] ide: factor out simplex handling from ide_pci_dma_base() Bartlomiej Zolnierkiewicz
2008-06-20 21:34 ` [PATCH 06/18] ide: add ->exec_command method Bartlomiej Zolnierkiewicz
2008-06-20 21:34 ` [PATCH 07/18] ide: add ->read_status method Bartlomiej Zolnierkiewicz
2008-06-20 21:34 ` [PATCH 08/18] ide: add ->read_altstatus method Bartlomiej Zolnierkiewicz
2008-06-20 21:34 ` Bartlomiej Zolnierkiewicz [this message]
2008-10-15 12:20 ` [PATCH 09/18] ide: add ->set_irq method Sergei Shtylyov
2008-10-15 18:22 ` Bartlomiej Zolnierkiewicz
2008-10-15 21:22 ` Sergei Shtylyov
2008-06-20 21:34 ` [PATCH 10/18] ide: change order of register access in ide_config_drive_speed() Bartlomiej Zolnierkiewicz
2008-06-20 21:34 ` [PATCH 11/18] ide: use ->tf_load " Bartlomiej Zolnierkiewicz
2008-06-20 21:34 ` [PATCH 12/18] ide: use ->tf_load in actual_try_to_identify() Bartlomiej Zolnierkiewicz
2008-06-20 23:14 ` Sergei Shtylyov
2008-06-21 19:10 ` Bartlomiej Zolnierkiewicz
2008-06-20 21:34 ` [PATCH 13/18] ide: use ->tf_load in SELECT_DRIVE() Bartlomiej Zolnierkiewicz
2009-02-15 20:25 ` Sergei Shtylyov
2009-02-16 0:08 ` Sergei Shtylyov
2009-02-16 11:50 ` Sergei Shtylyov
2009-02-16 21:51 ` Bartlomiej Zolnierkiewicz
2009-02-17 1:04 ` Sergei Shtylyov
2009-02-17 14:43 ` Bartlomiej Zolnierkiewicz
2009-02-17 15:32 ` Sergei Shtylyov
2009-03-04 15:43 ` Sergei Shtylyov
2009-02-17 12:23 ` Sergei Shtylyov
2009-02-17 15:13 ` Sergei Shtylyov
2008-06-20 21:34 ` [PATCH 14/18] ide: use ->tf_read in ide_read_error() Bartlomiej Zolnierkiewicz
2009-02-15 23:21 ` Sergei Shtylyov
2009-02-16 12:13 ` Sergei Shtylyov
2009-02-16 12:25 ` Sergei Shtylyov
2009-02-16 21:17 ` Bartlomiej Zolnierkiewicz
2009-02-17 0:14 ` Sergei Shtylyov
2009-02-17 0:50 ` Sergei Shtylyov
2008-06-20 21:35 ` [PATCH 15/18] ide: add ide_read_device() helper Bartlomiej Zolnierkiewicz
2008-06-20 21:35 ` [PATCH 16/18] ide: add ide_read_ireason() helper Bartlomiej Zolnierkiewicz
2008-06-20 21:35 ` [PATCH 17/18] ide: add ide_read_bcount_and_ireason() helper Bartlomiej Zolnierkiewicz
2008-06-20 21:35 ` [PATCH 18/18] ide: remove ->INB, ->OUTB and ->OUTBSYNC methods Bartlomiej Zolnierkiewicz
2008-09-03 13:19 ` [PATCH 01/18] ide: add ->read_sff_dma_status method Sergei Shtylyov
2008-09-03 18:13 ` Bartlomiej Zolnierkiewicz
2008-09-07 18:15 ` Sergei Shtylyov
2008-09-07 18:49 ` Sergei Shtylyov
2008-09-07 19:23 ` Bartlomiej Zolnierkiewicz
2008-09-07 22:26 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080620213424.13202.16889.sendpatchset@localhost.localdomain \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox