From: Yinghai Lu <yhlu.kernel@gmail.com>
To: Ingo Molnar <mingo@elte.hu>, "H. Peter Anvin" <hpa@zytor.com>,
Thomas Gleixner <tglx@linutronix.de>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [PATCH] x86: move elfcorehdr parsing to setup.c
Date: Sat, 21 Jun 2008 21:02:20 -0700 [thread overview]
Message-ID: <200806212102.20941.yhlu.kernel@gmail.com> (raw)
In-Reply-To: <200806212022.10077.yhlu.kernel@gmail.com>
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
---
arch/x86/kernel/setup.c | 19 +++++++++++++++++++
arch/x86/kernel/setup_32.c | 16 ----------------
arch/x86/kernel/setup_64.c | 17 -----------------
3 files changed, 19 insertions(+), 33 deletions(-)
Index: linux-2.6/arch/x86/kernel/setup_64.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/setup_64.c
+++ linux-2.6/arch/x86/kernel/setup_64.c
@@ -26,7 +26,6 @@
#include <asm/processor.h>
#include <linux/console.h>
#include <linux/seq_file.h>
-#include <linux/crash_dump.h>
#include <linux/root_dev.h>
#include <linux/pci.h>
#include <asm/pci-direct.h>
@@ -131,22 +130,6 @@ static struct resource bss_resource = {
.flags = IORESOURCE_RAM,
};
-#ifdef CONFIG_PROC_VMCORE
-/* elfcorehdr= specifies the location of elf core header
- * stored by the crashed kernel. This option will be passed
- * by kexec loader to the capture kernel.
- */
-static int __init setup_elfcorehdr(char *arg)
-{
- char *end;
- if (!arg)
- return -EINVAL;
- elfcorehdr_addr = memparse(arg, &end);
- return end > arg ? 0 : -EINVAL;
-}
-early_param("elfcorehdr", setup_elfcorehdr);
-#endif
-
#ifndef CONFIG_NUMA
static void __init
contig_initmem_init(unsigned long start_pfn, unsigned long end_pfn)
Index: linux-2.6/arch/x86/kernel/setup_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/setup_32.c
+++ linux-2.6/arch/x86/kernel/setup_32.c
@@ -42,7 +42,6 @@
#include <linux/iscsi_ibft.h>
#include <linux/nodemask.h>
#include <linux/kexec.h>
-#include <linux/crash_dump.h>
#include <linux/dmi.h>
#include <linux/pfn.h>
#include <linux/pci.h>
@@ -195,21 +194,6 @@ static inline void copy_edd(void)
}
#endif
-#ifdef CONFIG_PROC_VMCORE
-/* elfcorehdr= specifies the location of elf core header
- * stored by the crashed kernel.
- */
-static int __init parse_elfcorehdr(char *arg)
-{
- if (!arg)
- return -EINVAL;
-
- elfcorehdr_addr = memparse(arg, &arg);
- return 0;
-}
-early_param("elfcorehdr", parse_elfcorehdr);
-#endif /* CONFIG_PROC_VMCORE */
-
/*
* highmem=size forces highmem to be exactly 'size' bytes.
* This works even on boxes that have no highmem otherwise.
Index: linux-2.6/arch/x86/kernel/setup.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/setup.c
+++ linux-2.6/arch/x86/kernel/setup.c
@@ -4,6 +4,7 @@
#include <linux/bootmem.h>
#include <linux/percpu.h>
#include <linux/kexec.h>
+#include <linux/crash_dump.h>
#include <asm/smp.h>
#include <asm/percpu.h>
#include <asm/sections.h>
@@ -500,3 +501,21 @@ void __init reserve_standard_io_resource
request_resource(&ioport_resource, &standard_io_resources[i]);
}
+
+#ifdef CONFIG_PROC_VMCORE
+/* elfcorehdr= specifies the location of elf core header
+ * stored by the crashed kernel. This option will be passed
+ * by kexec loader to the capture kernel.
+ */
+static int __init setup_elfcorehdr(char *arg)
+{
+ char *end;
+ if (!arg)
+ return -EINVAL;
+ elfcorehdr_addr = memparse(arg, &end);
+ return end > arg ? 0 : -EINVAL;
+}
+early_param("elfcorehdr", setup_elfcorehdr);
+#endif
+
+
next prev parent reply other threads:[~2008-06-22 4:01 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-18 9:15 [PATCH] x86: make 64bit identify_cpu use cpu_dev Yinghai Lu
2008-06-18 14:17 ` Ingo Molnar
2008-06-19 9:03 ` Ingo Molnar
2008-06-19 20:00 ` Yinghai Lu
2008-06-19 22:30 ` [PATCH] x86: make 64bit identify_cpu use cpu_dev v2 Yinghai Lu
2008-06-20 6:29 ` Ingo Molnar
2008-06-20 7:08 ` Yinghai Lu
[not found] ` <200806210323.01590.yhlu.kernel@gmail.com>
2008-06-21 10:24 ` [PATCH] x86: change identify_cpu to static Yinghai Lu
2008-06-21 10:24 ` [PATCH] x86: seperate funcs from setup_64 to cpu common_64.c Yinghai Lu
2008-06-21 23:25 ` [PATCH] x86: merge setup64.c into common_64.c Yinghai Lu
2008-06-22 2:16 ` [PATCH] x86: remove two duplicated func in setup_32.c Yinghai Lu
2008-06-22 3:22 ` [PATCH] x86: move reserve_standard_io_resource to setup.c Yinghai Lu
2008-06-22 4:02 ` Yinghai Lu [this message]
2008-06-22 9:44 ` [PATCH] x86: introduce initmem_init for 64 bit Yinghai Lu
2008-06-22 9:45 ` [PATCH] x86: introduce initmem_init for 32 bit Yinghai Lu
2008-06-22 9:46 ` [PATCH] x86: introduce reserve_initrd Yinghai Lu
2008-06-23 0:37 ` [PATCH] x86: move boot_params declaring to setup.c Yinghai Lu
2008-06-23 0:40 ` [PATCH] x86: move reservetop and vmalloc parsing to pgtable_32.c Yinghai Lu
2008-06-23 0:40 ` [PATCH] x86: introduce reserve_initrd Yinghai Lu
2008-06-23 10:04 ` [PATCH] x86: move reservetop and vmalloc parsing to pgtable_32.c Yinghai Lu
2008-06-23 10:05 ` [PATCH] x86: cleanup using max_low_pfn for 32 bit Yinghai Lu
2008-06-23 19:56 ` Ingo Molnar
2008-06-23 19:57 ` H. Peter Anvin
2008-06-23 20:22 ` Ingo Molnar
2008-06-23 20:27 ` Yinghai Lu
2008-06-23 10:06 ` [PATCH] x86: cleanup min_low_pfn Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200806212102.20941.yhlu.kernel@gmail.com \
--to=yhlu.kernel@gmail.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox