[PATCH 12/16] x86: move reserve_standard_io_resources back to setup.c

[Yinghai Lu <yhlu.kernel@gmail.com>]

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>

---
 arch/x86/kernel/setup.c        |   33 +++++++++++++++++++++++++++++++++
 arch/x86/kernel/setup_percpu.c |   32 --------------------------------
 2 files changed, 33 insertions(+), 32 deletions(-)

Index: linux-2.6/arch/x86/kernel/setup.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/setup.c
+++ linux-2.6/arch/x86/kernel/setup.c
@@ -454,6 +454,39 @@ void __init reserve_crashkernel(void)
 }
 #endif
 
+static struct resource standard_io_resources[] = {
+	{ .name = "dma1", .start = 0x00, .end = 0x1f,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "pic1", .start = 0x20, .end = 0x21,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "timer0", .start = 0x40, .end = 0x43,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "timer1", .start = 0x50, .end = 0x53,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "keyboard", .start = 0x60, .end = 0x60,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "keyboard", .start = 0x64, .end = 0x64,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "dma page reg", .start = 0x80, .end = 0x8f,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "pic2", .start = 0xa0, .end = 0xa1,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "dma2", .start = 0xc0, .end = 0xdf,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "fpu", .start = 0xf0, .end = 0xff,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO }
+};
+
+void __init reserve_standard_io_resources(void)
+{
+	int i;
+
+	/* request I/O space for devices used on all i[345]86 PCs */
+	for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
+		request_resource(&ioport_resource, &standard_io_resources[i]);
+
+}
+
 /*
  * Determine if we were loaded by an EFI loader.  If so, then we have also been
  * passed the efi memmap, systab, etc., so we should use these data structures
Index: linux-2.6/arch/x86/kernel/setup_percpu.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/setup_percpu.c
+++ linux-2.6/arch/x86/kernel/setup_percpu.c
@@ -387,38 +387,6 @@ EXPORT_SYMBOL(node_to_cpumask);
 
 #endif /* X86_64_NUMA */
 
-static struct resource standard_io_resources[] = {
-	{ .name = "dma1", .start = 0x00, .end = 0x1f,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "pic1", .start = 0x20, .end = 0x21,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "timer0", .start = 0x40, .end = 0x43,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "timer1", .start = 0x50, .end = 0x53,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "keyboard", .start = 0x60, .end = 0x60,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "keyboard", .start = 0x64, .end = 0x64,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "dma page reg", .start = 0x80, .end = 0x8f,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "pic2", .start = 0xa0, .end = 0xa1,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "dma2", .start = 0xc0, .end = 0xdf,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "fpu", .start = 0xf0, .end = 0xff,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO }
-};
-
-void __init reserve_standard_io_resources(void)
-{
-	int i;
-
-	/* request I/O space for devices used on all i[345]86 PCs */
-	for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
-		request_resource(&ioport_resource, &standard_io_resources[i]);
-
-}
 
 #ifdef CONFIG_PROC_VMCORE
 /* elfcorehdr= specifies the location of elf core header