From: ben@fluff.org.uk
To: linux-kernel@vger.kernel.org, drzeus-mmc@drzeus.cx
Cc: laforge@openmoko.org, tk@maintech.de, Ben Dooks <ben-linux@fluff.org>
Subject: [patch v5 09/16] MMC: S3C24XX: Allow card-detect on non-IRQ capable pin
Date: Mon, 30 Jun 2008 22:40:32 +0100 [thread overview]
Message-ID: <20080630214110.435818323@fluff.org.uk> (raw)
In-Reply-To: 20080630214023.140288591@fluff.org.uk
[-- Attachment #1: simtec/s3c24xx-sdmmc-nocdirq.patch --]
[-- Type: text/plain, Size: 2355 bytes --]
Add support to the S3C24XX MMC driver to have the card detect be on
a pin that is not IRQ capable.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Index: linux-2.6.26-rc8-next20080627/drivers/mmc/host/s3cmci.c
===================================================================
--- linux-2.6.26-rc8-next20080627.orig/drivers/mmc/host/s3cmci.c 2008-06-30 12:36:49.000000000 +0100
+++ linux-2.6.26-rc8-next20080627/drivers/mmc/host/s3cmci.c 2008-06-30 12:36:51.000000000 +0100
@@ -1150,8 +1150,6 @@ static int __devinit s3cmci_probe(struct
host->pio_active = XFER_NONE;
host->dma = S3CMCI_DMA;
- host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect);
- s3c2410_gpio_cfgpin(host->pdata->gpio_detect, S3C2410_GPIO_IRQ);
host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!host->mem) {
@@ -1197,14 +1195,20 @@ static int __devinit s3cmci_probe(struct
disable_irq(host->irq);
- s3c2410_gpio_cfgpin(host->pdata->gpio_detect, S3C2410_GPIO_IRQ);
- set_irq_type(host->irq_cd, IRQT_BOTHEDGE);
+ host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect);
- if (request_irq(host->irq_cd, s3cmci_irq_cd, 0, DRIVER_NAME, host)) {
- dev_err(&pdev->dev,
- "failed to request card detect interrupt.\n");
- ret = -ENOENT;
- goto probe_free_irq;
+ if (host->irq_cd >= 0) {
+ if (request_irq(host->irq_cd, s3cmci_irq_cd,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ DRIVER_NAME, host)) {
+ dev_err(&pdev->dev, "can't get card detect irq.\n");
+ ret = -ENOENT;
+ goto probe_free_irq;
+ }
+ } else {
+ dev_warn(&pdev->dev, "host detect has no irq available\n");
+ s3c2410_gpio_cfgpin(host->pdata->gpio_detect,
+ S3C2410_GPIO_INPUT);
}
if (host->pdata->gpio_wprotect)
@@ -1273,7 +1277,8 @@ static int __devinit s3cmci_probe(struct
clk_put(host->clk);
probe_free_irq_cd:
- free_irq(host->irq_cd, host);
+ if (host->irq_cd >= 0)
+ free_irq(host->irq_cd, host);
probe_free_irq:
free_irq(host->irq, host);
@@ -1303,7 +1308,8 @@ static int s3cmci_remove(struct platform
tasklet_disable(&host->pio_tasklet);
s3c2410_dma_free(S3CMCI_DMA, &s3cmci_dma_client);
- free_irq(host->irq_cd, host);
+ if (host->irq_cd >= 0)
+ free_irq(host->irq_cd, host);
free_irq(host->irq, host);
iounmap(host->base);
--
Ben (ben@fluff.org, http://www.fluff.org/)
'a smiley only costs 4 bytes'
next prev parent reply other threads:[~2008-06-30 21:51 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-30 21:40 [patch v5 00/16] S3C24XX SD/MMC driver ben
2008-06-30 21:40 ` [patch v5 01/16] MMC: S3C24XX MMC/SD driver ben
2008-06-30 21:40 ` [patch v5 02/16] MMC: S3C24XX MMC/SD driver write fixes ben
2008-06-30 21:40 ` [patch v5 03/16] MMC: DMA free fix for S3C24XX SD/MMC driver ben
2008-06-30 21:40 ` [patch v5 04/16] MMC: S3C24XX MMC/SD stop fix ben
2008-06-30 21:40 ` [patch v5 05/16] MMC: Fix S3C24XX IRQ enable during PIO transfers ben
2008-06-30 21:40 ` [patch v5 06/16] MMC: S3C24XX: Add platform data for MMC/SD driver ben
2008-06-30 21:40 ` [patch v5 07/16] MMC: S3C24XX: Add support to invert write protect line ben
2008-06-30 21:40 ` [patch v5 08/16] MMC: S3C24XX: Ensure host->mrq->data is valid ben
2008-06-30 21:40 ` ben [this message]
2008-06-30 21:40 ` [patch v5 10/16] MMC: S3C24XX: Fix s3c2410_dma_request() return code check ben
2008-06-30 21:40 ` [patch v5 11/16] MMC: S3C24XX: Add MODULE_ALIAS() entries for the platform devices ben
2008-06-30 21:40 ` [patch v5 12/16] MMC: S3C24XX: Fix use of msecs where jiffies are needed ben
2008-06-30 21:40 ` [patch v5 13/16] MMC: S3C24XX: Add media presence test to request handling ben
2008-06-30 21:40 ` [patch v5 14/16] MMC: S3C24XX: Update error debugging ben
2008-06-30 21:40 ` [patch v5 15/16] MMC: S3C24XX: Add maintainer entry ben
2008-06-30 21:40 ` [patch v5 16/16] MMC: S3C24XX: Refuse incorrectly aligned transfers ben
2008-06-30 21:47 ` [patch v5 00/16] S3C24XX SD/MMC driver Ben Dooks
2008-07-04 17:05 ` Pierre Ossman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080630214110.435818323@fluff.org.uk \
--to=ben@fluff.org.uk \
--cc=ben-linux@fluff.org \
--cc=drzeus-mmc@drzeus.cx \
--cc=laforge@openmoko.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tk@maintech.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox