public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: "Uwe Kleine-König" <Uwe.Kleine-Koenig@digi.com>
To: <linux-kernel@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>, Ingo Molnar <mingo@elte.hu>,
	Andrew Morton <akpm@linux-foundation.org>
Subject: Re: [PATCH] handle failure of irqchip->set_type in setup_irq
Date: Wed, 2 Jul 2008 11:17:57 +0200	[thread overview]
Message-ID: <20080702091757.GA1144@digi.com> (raw)
In-Reply-To: <20080625131101.GA6205@digi.com>

Hello,

[extending the Cc: list]

Uwe Kleine-König wrote:
> set_type returns an int but currently setup_irq ignores that.
> 
> To save me from undoing some changes setting the IRQ_NO_BALANCING bit in
> desc->flags, setting IRQ_PER_CPU in desc->status and adding the new
> action to desc is only done after set_type succeeded.
> 
> Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
> ---
> Hello,
> 
> in my case set_type returns an error because gpio-key tries to use
> IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING and my irq-chip can only do
> one of these.

up to now I didn't get any response for this patch.  It addresses a real
problem for my platform so I really like to have a fix in.

In mmotm of 2008-07-01-21-57 kernel/irq/manage.c is touched[1],
too, but git was able to automerge the change correctly when applying it
on top of mmotm.

For your convenience you can find the patch again at the end of this
mail.

Andrew:  Do you can take this patch into mm?

Best regards
Uwe

[1] kernel/irq/manage.c is modified by linux-next patch.  The relevant
    commit is:
	1840475... genirq: Expose default irq affinity mask (take 3)


> diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
> index 46d6611..bc990a1 100644
> --- a/kernel/irq/manage.c
> +++ b/kernel/irq/manage.c
> @@ -281,6 +281,7 @@ int setup_irq(unsigned int irq, struct irqaction *new)
>  	const char *old_name = NULL;
>  	unsigned long flags;
>  	int shared = 0;
> +	int ret;
>  
>  	if (irq >= NR_IRQS)
>  		return -EINVAL;
> @@ -338,26 +339,23 @@ int setup_irq(unsigned int irq, struct irqaction *new)
>  		shared = 1;
>  	}
>  
> -	*p = new;
> -
> -	/* Exclude IRQ from balancing */
> -	if (new->flags & IRQF_NOBALANCING)
> -		desc->status |= IRQ_NO_BALANCING;
> -
>  	if (!shared) {
>  		irq_chip_set_defaults(desc->chip);
>  
> -#if defined(CONFIG_IRQ_PER_CPU)
> -		if (new->flags & IRQF_PERCPU)
> -			desc->status |= IRQ_PER_CPU;
> -#endif
> -
>  		/* Setup the type (level, edge polarity) if configured: */
>  		if (new->flags & IRQF_TRIGGER_MASK) {
> -			if (desc->chip && desc->chip->set_type)
> -				desc->chip->set_type(irq,
> +			if (desc->chip && desc->chip->set_type) {
> +				ret = desc->chip->set_type(irq,
>  						new->flags & IRQF_TRIGGER_MASK);
> -			else
> +				if (ret) {
> +					pr_err("setting flow type for irq %u "
> +							"failed\n", irq);
> +					spin_unlock_irqrestore(&desc->lock,
> +							flags);
> +					return ret;
> +				}
> +
> +			} else
>  				/*
>  				 * IRQF_TRIGGER_* but the PIC does not support
>  				 * multiple flow-types?
> @@ -369,6 +367,11 @@ int setup_irq(unsigned int irq, struct irqaction *new)
>  		} else
>  			compat_irq_chip_set_default_handler(desc);
>  
> +#if defined(CONFIG_IRQ_PER_CPU)
> +		if (new->flags & IRQF_PERCPU)
> +			desc->status |= IRQ_PER_CPU;
> +#endif
> +
>  		desc->status &= ~(IRQ_AUTODETECT | IRQ_WAITING |
>  				  IRQ_INPROGRESS | IRQ_SPURIOUS_DISABLED);
>  
> @@ -383,6 +386,13 @@ int setup_irq(unsigned int irq, struct irqaction *new)
>  			/* Undo nested disables: */
>  			desc->depth = 1;
>  	}
> +
> +	*p = new;
> +
> +	/* Exclude IRQ from balancing */
> +	if (new->flags & IRQF_NOBALANCING)
> +		desc->status |= IRQ_NO_BALANCING;
> +
>  	/* Reset broken irq detection when installing new handler */
>  	desc->irq_count = 0;
>  	desc->irqs_unhandled = 0;

-- 
Uwe Kleine-König, Software Engineer
Digi International GmbH Branch Breisach, Küferstrasse 8, 79206 Breisach, Germany
Tax: 315/5781/0242 / VAT: DE153662976 / Reg. Amtsgericht Dortmund HRB 13962

  reply	other threads:[~2008-07-02  9:18 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-25 13:11 [PATCH] handle failure of irqchip->set_type in setup_irq Uwe Kleine-König
2008-07-02  9:17 ` Uwe Kleine-König [this message]
2008-07-02  9:49   ` Andrew Morton
2008-07-02 10:09     ` Uwe Kleine-König
2008-07-04 10:46 ` [PATCH v2] " Uwe Kleine-König
2008-07-04 17:17   ` Andrew Morton
2008-07-04 18:43     ` Uwe Kleine-König
2008-07-04 19:08       ` Andrew Morton
2008-07-09 13:13         ` Uwe Kleine-König
2008-07-09 21:52           ` Andrew Morton
2008-07-10  8:23             ` Uwe Kleine-König
2008-07-10  8:28               ` Andrew Morton
     [not found]   ` <20080704111540.ddffd241.akpm@linux-foundation.org>
     [not found]     ` <alpine.LFD.1.10.0807041147450.2815@woody.linux-foundation.org>
     [not found]       ` <alpine.LFD.1.10.0807041250220.2815@woody.linux-foundation.org>
     [not found]         ` <20080704132716.f1e12554.akpm@linux-foundation.org>
     [not found]           ` <20080704204252.GM14894@parisc-linux.org>
2008-07-04 22:01             ` the printk problem Andrew Morton
2008-07-05  2:03               ` Matthew Wilcox
2008-07-22 10:05                 ` [PATCH] Make u64 long long on all architectures (was: the printk problem) Andrew Morton
2008-07-22 10:36                   ` Michael Ellerman
2008-07-22 10:53                     ` Andrew Morton
2008-07-22 11:36                     ` Benjamin Herrenschmidt
2008-07-22 11:35                   ` Benjamin Herrenschmidt
2008-07-05 10:20               ` the printk problem Denys Vlasenko
2008-07-05 11:33               ` Jan Engelhardt
2008-07-05 12:52                 ` Vegard Nossum
2008-07-05 13:24                   ` Jan Engelhardt
2008-07-05 13:50                     ` Vegard Nossum
2008-07-05 14:07                       ` Jan Engelhardt
2008-07-05 17:56                   ` Linus Torvalds
2008-07-05 18:40                     ` Jan Engelhardt
2008-07-05 18:44                       ` Linus Torvalds
2008-07-05 18:41                     ` Vegard Nossum
2008-07-05 18:52                       ` Matthew Wilcox
2008-07-06  0:02                         ` Pekka Enberg
2008-07-06  5:17                           ` Randy Dunlap
     [not found]         ` <1215212420.8970.8.camel@pasglop>
     [not found]           ` <alpine.LFD.1.10.0807041622270.2815@woody.linux-foundation.org>
     [not found]             ` <alpine.LFD.1.10.0807051523180.2847@woody.linux-foundation.org>
     [not found]               ` <20080706052741.GA18928@elte.hu>
2008-07-06  5:37                 ` Linus Torvalds
2008-07-06  5:53                   ` Ingo Molnar
2008-07-06  6:13                     ` Ingo Molnar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080702091757.GA1144@digi.com \
    --to=uwe.kleine-koenig@digi.com \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox