[RESEND] [PATCH -next 1/2] acpi,rfkill,backlight: comapl-laptop update - clarify the code

[Cezary Jackiewicz <cezary.jackiewicz@gmail.com>]

From: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

* Clarify the code
* The current LCD brightness after booting should now be reflected in the
  standard backlight interface sysfs file (previously it was always set to 0).        

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
---
diff -Nuar a/drivers/misc/compal-laptop.c b/drivers/misc/compal-laptop.c
--- a/drivers/misc/compal-laptop.c	2008-07-09 21:21:20.000000000 +0200
+++ b/drivers/misc/compal-laptop.c	2008-07-09 21:33:18.000000000 +0200
@@ -24,19 +24,10 @@
  */
 
 /*
- * comapl-laptop.c - Compal laptop support.
+ * compal-laptop.c - Compal laptop support.
  *
- * This driver exports a few files in /sys/devices/platform/compal-laptop/:
- *
- *   wlan - wlan subsystem state: contains 0 or 1 (rw)
- *
- *   bluetooth - Bluetooth subsystem state: contains 0 or 1 (rw)
- *
- *   raw - raw value taken from embedded controller register (ro)
- *
- * In addition to these platform device attributes the driver
- * registers itself in the Linux backlight control subsystem and is
- * available to userspace under /sys/class/backlight/compal-laptop/.
+ * This driver registers itself in the Linux backlight control subsystem
+ * and rfkill switch subsystem.
  *
  * This driver might work on other laptops produced by Compal. If you
  * want to try it you can pass force=1 as argument to the module which
@@ -53,7 +44,10 @@
 #include <linux/platform_device.h>
 #include <linux/autoconf.h>
 
-#define COMPAL_DRIVER_VERSION "0.2.6"
+#define COMPAL_DRIVER_VERSION "0.3.0"
+#define COMPAL_DRIVER_NAME "compal-laptop"
+#define COMPAL_ERR KERN_ERR COMPAL_DRIVER_NAME ": "
+#define COMPAL_INFO KERN_INFO COMPAL_DRIVER_NAME ": "
 
 #define COMPAL_LCD_LEVEL_MAX 8
 
@@ -253,7 +247,7 @@
 
 static struct platform_driver compal_driver = {
 	.driver = {
-		.name = "compal-laptop",
+		.name = COMPAL_DRIVER_NAME,
 		.owner = THIS_MODULE,
 	}
 };
@@ -264,7 +258,7 @@
 
 static int dmi_check_cb(const struct dmi_system_id *id)
 {
-	printk(KERN_INFO "compal-laptop: Identified laptop model '%s'.\n",
+	printk(COMPAL_INFO "Identified laptop model '%s'.\n",
 		id->ident);
 
 	return 0;
@@ -326,12 +320,13 @@
 
 	/* Register backlight stuff */
 
-	compalbl_device = backlight_device_register("compal-laptop", NULL, NULL,
-						&compalbl_ops);
+	compalbl_device = backlight_device_register(COMPAL_DRIVER_NAME,
+					NULL, NULL, &compalbl_ops);
 	if (IS_ERR(compalbl_device))
 		return PTR_ERR(compalbl_device);
 
 	compalbl_device->props.max_brightness = COMPAL_LCD_LEVEL_MAX-1;
+	compalbl_device->props.brightness = get_lcd_level();
 
 	ret = platform_driver_register(&compal_driver);
 	if (ret)
@@ -339,7 +334,7 @@
 
 	/* Register platform stuff */
 
-	compal_device = platform_device_alloc("compal-laptop", -1);
+	compal_device = platform_device_alloc(COMPAL_DRIVER_NAME, -1);
 	if (!compal_device) {
 		ret = -ENOMEM;
 		goto fail_platform_driver;
@@ -354,8 +349,8 @@
 	if (ret)
 		goto fail_platform_device2;
 
-	printk(KERN_INFO "compal-laptop: driver "COMPAL_DRIVER_VERSION
-		" successfully loaded.\n");
+	printk(COMPAL_INFO "driver "COMPAL_DRIVER_VERSION
+			" successfully loaded.\n");
 
 	return 0;
 
@@ -386,7 +381,7 @@
 	platform_driver_unregister(&compal_driver);
 	backlight_device_unregister(compalbl_device);
 
-	printk(KERN_INFO "compal-laptop: driver unloaded.\n");
+	printk(COMPAL_INFO "driver unloaded.\n");
 }
 
 module_init(compal_init);