From: Suresh Siddha <suresh.b.siddha@intel.com>
To: mingo@elte.hu, hpa@zytor.com, tglx@linutronix.de,
akpm@linux-foundation.org, arjan@linux.intel.com,
andi@firstfloor.org, ebiederm@xmission.com,
jbarnes@virtuousgeek.org, steiner@sgi.com
Cc: linux-kernel@vger.kernel.org, Suresh Siddha <suresh.b.siddha@intel.com>
Subject: [patch 17/26] x64, x2apic/intr-remap: disable DMA-remapping if Interrupt-remapping is detected (temporary quirk)
Date: Thu, 10 Jul 2008 11:16:51 -0700 [thread overview]
Message-ID: <20080710182238.345436000@linux-os.sc.intel.com> (raw)
In-Reply-To: 20080710181634.764954000@linux-os.sc.intel.com
[-- Attachment #1: disable_dmar_if_intr_remapping.patch --]
[-- Type: text/plain, Size: 1984 bytes --]
Interrupt-remapping enables queued invalidation. And once queued invalidation
is enabled, IOTLB invalidation also needs to use the queued invalidation
mechanism and the register based IOTLB invalidation doesn't work.
For now, Support for IOTLB invalidation using queued invalidation is
missing. Meanwhile, disable DMA-remapping, if Interrupt-remapping
support is detected.
For the meanwhile, if someone wants to really enable DMA-remapping, they
can use nox2apic, which will disable interrupt-remapping and as such
doesn't enable queued invalidation.
And given that none of the release platforms support intr-remapping yet,
we should be ok for this temporary hack.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
---
Index: tree-x86/drivers/pci/dmar.c
===================================================================
--- tree-x86.orig/drivers/pci/dmar.c 2008-07-10 09:52:03.000000000 -0700
+++ tree-x86/drivers/pci/dmar.c 2008-07-10 09:52:19.000000000 -0700
@@ -457,6 +457,31 @@
#ifdef CONFIG_DMAR
{
+ struct acpi_table_dmar *dmar;
+ /*
+ * for now we will disable dma-remapping when interrupt
+ * remapping is enabled.
+ * When support for queued invalidation for IOTLB invalidation
+ * is added, we will not need this any more.
+ */
+ dmar = (struct acpi_table_dmar *) dmar_tbl;
+ if (ret && cpu_has_x2apic && dmar->flags & 0x1) {
+ printk(KERN_INFO
+ "Queued invalidation will be enabled to support "
+ "x2apic and Intr-remapping.\n");
+ printk(KERN_INFO
+ "Disabling IOMMU detection, because of missing "
+ "queued invalidation support for IOTLB "
+ "invalidation\n");
+ printk(KERN_INFO
+ "Use \"nox2apic\", if you want to use Intel "
+ " IOMMU for DMA-remapping and don't care about "
+ " x2apic support\n");
+
+ dmar_disabled = 1;
+ return;
+ }
+
if (ret && !no_iommu && !iommu_detected && !swiotlb &&
!dmar_disabled)
iommu_detected = 1;
--
next prev parent reply other threads:[~2008-07-10 18:42 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-10 18:16 [patch 00/26] x64, x2apic/intr-remap: Interrupt-remapping and x2apic support Suresh Siddha
2008-07-10 18:16 ` [patch 01/26] x64, x2apic/intr-remap: Intel vt-d, IOMMU code reorganization Suresh Siddha
2008-07-10 18:16 ` [patch 02/26] x64, x2apic/intr-remap: fix the need for sequential array allocation of iommus Suresh Siddha
2008-07-10 18:16 ` [patch 03/26] x64, x2apic/intr-remap: code re-structuring, to be used by both DMA and Interrupt remapping Suresh Siddha
2008-07-10 18:16 ` [patch 04/26] x64, x2apic/intr-remap: use CONFIG_DMAR for DMA-remapping specific code Suresh Siddha
2008-07-10 18:16 ` [patch 05/26] x64, x2apic/intr-remap: Fix the need for RMRR in the DMA-remapping detection Suresh Siddha
2008-07-10 18:16 ` [patch 06/26] x64, x2apic/intr-remap: parse ioapic scope under vt-d structures Suresh Siddha
2008-07-10 18:16 ` [patch 07/26] x64, x2apic/intr-remap: move IOMMU_WAIT_OP() macro to intel-iommu.h Suresh Siddha
2008-07-10 18:16 ` [patch 08/26] x64, x2apic/intr-remap: Queued invalidation infrastructure (part of VT-d) Suresh Siddha
2008-07-10 18:16 ` [patch 09/26] x64, x2apic/intr-remap: Interrupt remapping infrastructure Suresh Siddha
2008-07-10 18:16 ` [patch 10/26] x64, x2apic/intr-remap: routines managing Interrupt remapping table entries Suresh Siddha
2008-07-10 18:16 ` [patch 11/26] x64, x2apic/intr-remap: generic irq migration support from process context Suresh Siddha
2008-07-10 23:08 ` Eric W. Biederman
2008-07-11 5:41 ` Suresh Siddha
2008-07-11 9:19 ` Eric W. Biederman
2008-07-10 18:16 ` [patch 12/26] x64, x2apic/intr-remap: 8259 specific mask/unmask routines Suresh Siddha
2008-07-10 18:16 ` [patch 13/26] x64, x2apic/intr-remap: ioapic routines which deal with initial io-apic RTE setup Suresh Siddha
2008-07-10 18:16 ` [patch 14/26] x64, x2apic/intr-remap: introduce read_apic_id() to genapic routines Suresh Siddha
2008-07-10 18:16 ` [patch 15/26] x64, x2apic/intr-remap: basic apic ops support Suresh Siddha
2008-07-10 18:16 ` [patch 16/26] x64, x2apic/intr-remap: cpuid bits for x2apic feature Suresh Siddha
2008-07-10 18:16 ` Suresh Siddha [this message]
2008-07-10 18:16 ` [patch 18/26] x64, x2apic/intr-remap: x2apic ops for x2apic mode support Suresh Siddha
2008-07-10 18:16 ` [patch 19/26] x64, x2apic/intr-remap: introcude self IPI to genapic routines Suresh Siddha
2008-07-10 23:34 ` Eric W. Biederman
2008-07-11 2:29 ` Mike Travis
2008-07-11 3:50 ` Eric W. Biederman
2008-07-11 13:55 ` Mike Travis
2008-07-10 18:16 ` [patch 20/26] x64, x2apic/intr-remap: x2apic cluster mode support Suresh Siddha
2008-07-10 18:16 ` [patch 21/26] x64, x2apic/intr-remap: setup init_apic_ldr for UV Suresh Siddha
2008-07-11 0:14 ` Andrew Morton
2008-07-11 1:56 ` Suresh Siddha
2008-07-10 18:16 ` [patch 22/26] x64, x2apic/intr-remap: IO-APIC support for interrupt-remapping Suresh Siddha
2008-07-10 18:16 ` [patch 23/26] x64, x2apic/intr-remap: MSI and MSI-X support for interrupt remapping infrastructure Suresh Siddha
2008-07-11 1:22 ` Eric W. Biederman
2008-07-11 6:07 ` Suresh Siddha
2008-07-11 8:59 ` Eric W. Biederman
2008-07-11 23:07 ` Suresh Siddha
2008-07-11 23:50 ` Eric W. Biederman
2008-07-10 18:16 ` [patch 24/26] x64, x2apic/intr-remap: add x2apic support, including enabling interrupt-remapping Suresh Siddha
2008-07-10 18:16 ` [patch 25/26] x64, x2apic/intr-remap: support for x2apic physical mode support Suresh Siddha
2008-07-10 18:17 ` [patch 26/26] x64, x2apic/intr-remap: introduce CONFIG_INTR_REMAP Suresh Siddha
2008-07-10 23:29 ` Eric W. Biederman
2008-07-10 23:37 ` Yong Wang
2008-07-11 1:50 ` Suresh Siddha
2008-07-11 1:53 ` Eric W. Biederman
2008-07-10 19:53 ` [patch 00/26] x64, x2apic/intr-remap: Interrupt-remapping and x2apic support Ingo Molnar
2008-07-10 20:22 ` Suresh Siddha
2008-07-10 21:56 ` Suresh Siddha
2008-07-11 10:28 ` Ingo Molnar
2008-07-11 20:09 ` Ingo Molnar
2008-07-11 20:31 ` Suresh Siddha
2008-07-11 20:42 ` Yinghai Lu
2008-07-11 20:45 ` Ingo Molnar
2008-07-11 21:24 ` Suresh Siddha
2008-07-11 22:02 ` Yinghai Lu
2008-07-12 3:16 ` Yinghai Lu
2008-07-12 3:52 ` Eric W. Biederman
2008-07-12 6:17 ` Yinghai Lu
2008-07-12 7:02 ` Eric W. Biederman
2008-07-12 7:49 ` Yinghai Lu
2008-07-12 8:11 ` Eric W. Biederman
2008-07-12 8:37 ` Yinghai Lu
2008-07-12 9:46 ` Eric W. Biederman
2008-07-13 1:02 ` Suresh Siddha
2008-07-13 1:01 ` Suresh Siddha
2008-07-13 1:32 ` Suresh Siddha
2008-07-13 1:00 ` Suresh Siddha
2008-07-13 0:55 ` Suresh Siddha
2008-07-12 5:37 ` Ingo Molnar
2008-07-12 6:06 ` Yinghai Lu
2008-07-12 6:45 ` Ingo Molnar
2008-07-11 20:49 ` Ingo Molnar
2008-07-16 14:37 ` Yong Wang
2008-07-16 14:53 ` Ingo Molnar
2008-07-22 20:49 ` Andrew Morton
2008-07-22 21:00 ` Mike Travis
2008-07-22 21:14 ` Andrew Morton
2008-07-24 5:03 ` Ingo Molnar
2008-07-10 20:05 ` Eric W. Biederman
2008-07-10 20:18 ` Ingo Molnar
2008-07-10 21:07 ` Eric W. Biederman
2008-07-10 21:15 ` Suresh Siddha
2008-07-10 22:52 ` Eric W. Biederman
2008-07-11 2:35 ` Suresh Siddha
2008-07-11 3:15 ` Eric W. Biederman
2008-07-10 22:09 ` Arjan van de Ven
2008-07-10 22:54 ` Eric W. Biederman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080710182238.345436000@linux-os.sc.intel.com \
--to=suresh.b.siddha@intel.com \
--cc=akpm@linux-foundation.org \
--cc=andi@firstfloor.org \
--cc=arjan@linux.intel.com \
--cc=ebiederm@xmission.com \
--cc=hpa@zytor.com \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=steiner@sgi.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox