The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Sascha Sommer <saschasommer@freenet.de>
To: Pierre Ossman <drzeus-list@drzeus.cx>
Cc: sdricohcs-devel@lists.sourceforge.net, linux-kernel@vger.kernel.org
Subject: Re: Status of Ricoh Bay1Controller driver?
Date: Fri, 11 Jul 2008 20:45:49 +0200	[thread overview]
Message-ID: <200807112045.49809.saschasommer@freenet.de> (raw)
In-Reply-To: <20080706194958.655056b4@mjolnir.drzeus.cx>

[-- Attachment #1: Type: text/plain, Size: 439 bytes --]

Hi,

On Sonntag, 6. Juli 2008, Pierre Ossman wrote:
> On Sun, 6 Jul 2008 09:09:30 +0200
>
> Sascha Sommer <saschasommer@freenet.de> wrote:
> > So to summarize this I agree that it is important to get rid off these
> > hacks ;) but I don't have a better solution available at the moment ;(.
>
> Very odd. Anyway, send an updated patch with a proper entry in
> MAINTAINERS and I'll queue it up.
>

See the attached patch.

Regards

Sascha



[-- Attachment #2: sdricoh_cs_try4.patch --]
[-- Type: text/x-diff, Size: 16959 bytes --]

MMC/SD host driver for Ricoh Bay1Controllers

Signed-off-by: Sascha Sommer <saschasommer@freenet.de>

--- drivers/mmc/host.org/Kconfig	2008-04-27 14:35:31.000000000 +0200
+++ drivers/mmc/host/Kconfig	2008-07-05 19:37:13.000000000 +0200
@@ -130,3 +130,13 @@
 
 	  If unsure, or if your system has no SPI master driver, say N.
 
+config MMC_SDRICOH_CS
+	tristate "MMC/SD driver for Ricoh Bay1Controllers (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && MMC && PCI && PCMCIA
+	help
+	  Say Y here if your Notebook reports a Ricoh Bay1Controller PCMCIA
+	  card whenever you insert a MMC or SD card into the card slot.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sdricoh_cs.
+
--- drivers/mmc/host.org/Makefile	2008-04-27 14:35:31.000000000 +0200
+++ drivers/mmc/host/Makefile	2008-04-27 14:37:13.000000000 +0200
@@ -17,4 +17,5 @@
 obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
 obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
 obj-$(CONFIG_MMC_SPI)		+= mmc_spi.o
+obj-$(CONFIG_MMC_SDRICOH_CS)	+= sdricoh_cs.o
 
--- /dev/null	2007-09-21 23:50:58.000000000 +0200
+++ drivers/mmc/host/sdricoh_cs.c	2008-07-05 20:20:33.000000000 +0200
@@ -0,0 +1,575 @@
+/*
+ *  sdricoh_cs.c - driver for Ricoh Secure Digital Card Readers that can be
+ *     found on some Ricoh RL5c476 II cardbus bridge
+ *
+ *  Copyright (C) 2006 - 2008 Sascha Sommer <saschasommer@freenet.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/*
+#define DEBUG
+#define VERBOSE_DEBUG
+*/
+#include <linux/delay.h>
+#include <linux/highmem.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/scatterlist.h>
+#include <linux/version.h>
+
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+#include <linux/io.h>
+
+#include <linux/mmc/host.h>
+
+#define DRIVER_NAME "sdricoh_cs"
+
+static unsigned int switchlocked;
+
+/* i/o region */
+#define SDRICOH_PCI_REGION 0
+#define SDRICOH_PCI_REGION_SIZE 0x1000
+
+/* registers */
+#define R104_VERSION     0x104
+#define R200_CMD         0x200
+#define R204_CMD_ARG     0x204
+#define R208_DATAIO      0x208
+#define R20C_RESP        0x20c
+#define R21C_STATUS      0x21c
+#define R2E0_INIT        0x2e0
+#define R2E4_STATUS_RESP 0x2e4
+#define R2F0_RESET       0x2f0
+#define R224_MODE        0x224
+#define R226_BLOCKSIZE   0x226
+#define R228_POWER       0x228
+#define R230_DATA        0x230
+
+/* flags for the R21C_STATUS register */
+#define STATUS_CMD_FINISHED      0x00000001
+#define STATUS_TRANSFER_FINISHED 0x00000004
+#define STATUS_CARD_INSERTED     0x00000020
+#define STATUS_CARD_LOCKED       0x00000080
+#define STATUS_CMD_TIMEOUT       0x00400000
+#define STATUS_READY_TO_READ     0x01000000
+#define STATUS_READY_TO_WRITE    0x02000000
+#define STATUS_BUSY              0x40000000
+
+/* timeouts */
+#define INIT_TIMEOUT      100
+#define CMD_TIMEOUT       100000
+#define TRANSFER_TIMEOUT  100000
+#define BUSY_TIMEOUT      32767
+
+/* list of supported pcmcia devices */
+static struct pcmcia_device_id pcmcia_ids[] = {
+	/* vendor and device strings followed by their crc32 hashes */
+	PCMCIA_DEVICE_PROD_ID12("RICOH", "Bay1Controller", 0xd9f522ed,
+				0xc3901202),
+	PCMCIA_DEVICE_NULL,
+};
+
+MODULE_DEVICE_TABLE(pcmcia, pcmcia_ids);
+
+/* mmc privdata */
+struct sdricoh_host {
+	struct device *dev;
+	struct mmc_host *mmc;	/* MMC structure */
+	unsigned char __iomem *iobase;
+	struct pci_dev *pci_dev;
+	int app_cmd;
+};
+
+/***************** register i/o helper functions *****************************/
+
+static inline unsigned int sdricoh_readl(struct sdricoh_host *host,
+					 unsigned int reg)
+{
+	unsigned int value = readl(host->iobase + reg);
+	dev_vdbg(host->dev, "rl %x 0x%x\n", reg, value);
+	return value;
+}
+
+static inline void sdricoh_writel(struct sdricoh_host *host, unsigned int reg,
+				  unsigned int value)
+{
+	writel(value, host->iobase + reg);
+	dev_vdbg(host->dev, "wl %x 0x%x\n", reg, value);
+
+}
+
+static inline unsigned int sdricoh_readw(struct sdricoh_host *host,
+					 unsigned int reg)
+{
+	unsigned int value = readw(host->iobase + reg);
+	dev_vdbg(host->dev, "rb %x 0x%x\n", reg, value);
+	return value;
+}
+
+static inline void sdricoh_writew(struct sdricoh_host *host, unsigned int reg,
+					 unsigned short value)
+{
+	writew(value, host->iobase + reg);
+	dev_vdbg(host->dev, "ww %x 0x%x\n", reg, value);
+}
+
+static inline unsigned int sdricoh_readb(struct sdricoh_host *host,
+					 unsigned int reg)
+{
+	unsigned int value = readb(host->iobase + reg);
+	dev_vdbg(host->dev, "rb %x 0x%x\n", reg, value);
+	return value;
+}
+
+static int sdricoh_query_status(struct sdricoh_host *host, unsigned int wanted,
+				unsigned int timeout){
+	unsigned int loop;
+	unsigned int status = 0;
+	struct device *dev = host->dev;
+	for (loop = 0; loop < timeout; loop++) {
+		status = sdricoh_readl(host, R21C_STATUS);
+		sdricoh_writel(host, R2E4_STATUS_RESP, status);
+		if (status & wanted)
+			break;
+	}
+
+	if (loop == timeout) {
+		dev_err(dev, "query_status: timeout waiting for %x\n", wanted);
+		return -ETIMEDOUT;
+	}
+
+	/* do not do this check in the loop as some commands fail otherwise */
+	if (status & 0x7F0000) {
+		dev_err(dev, "waiting for status bit %x failed\n", wanted);
+		return -EINVAL;
+	}
+	return 0;
+
+}
+
+static int sdricoh_mmc_cmd(struct sdricoh_host *host, unsigned char opcode,
+			   unsigned int arg)
+{
+	unsigned int status;
+	int result = 0;
+	unsigned int loop = 0;
+	/* reset status reg? */
+	sdricoh_writel(host, R21C_STATUS, 0x18);
+	/* fill parameters */
+	sdricoh_writel(host, R204_CMD_ARG, arg);
+	sdricoh_writel(host, R200_CMD, (0x10000 << 8) | opcode);
+	/* wait for command completion */
+	if (opcode) {
+		for (loop = 0; loop < CMD_TIMEOUT; loop++) {
+			status = sdricoh_readl(host, R21C_STATUS);
+			sdricoh_writel(host, R2E4_STATUS_RESP, status);
+			if (status  & STATUS_CMD_FINISHED)
+				break;
+		}
+		/* don't check for timeout in the loop it is not always
+		   reset correctly
+		*/
+		if (loop == CMD_TIMEOUT || status & STATUS_CMD_TIMEOUT)
+			result = -ETIMEDOUT;
+
+	}
+
+	return result;
+
+}
+
+static int sdricoh_reset(struct sdricoh_host *host)
+{
+	dev_dbg(host->dev, "reset\n");
+	sdricoh_writel(host, R2F0_RESET, 0x10001);
+	sdricoh_writel(host, R2E0_INIT, 0x10000);
+	if (sdricoh_readl(host, R2E0_INIT) != 0x10000)
+		return -EIO;
+	sdricoh_writel(host, R2E0_INIT, 0x10007);
+
+	sdricoh_writel(host, R224_MODE, 0x2000000);
+	sdricoh_writel(host, R228_POWER, 0xe0);
+
+
+	/* status register ? */
+	sdricoh_writel(host, R21C_STATUS, 0x18);
+
+	return 0;
+}
+
+static int sdricoh_blockio(struct sdricoh_host *host, int read,
+				u8 *buf, int len)
+{
+	int size;
+	u32 data = 0;
+	/* wait until the data is available */
+	if (read) {
+		if (sdricoh_query_status(host, STATUS_READY_TO_READ,
+						TRANSFER_TIMEOUT))
+			return -ETIMEDOUT;
+		sdricoh_writel(host, R21C_STATUS, 0x18);
+		/* read data */
+		while (len) {
+			data = sdricoh_readl(host, R230_DATA);
+			size = min(len, 4);
+			len -= size;
+			while (size) {
+				*buf = data & 0xFF;
+				buf++;
+				data >>= 8;
+				size--;
+			}
+		}
+	} else {
+		if (sdricoh_query_status(host, STATUS_READY_TO_WRITE,
+						TRANSFER_TIMEOUT))
+			return -ETIMEDOUT;
+		sdricoh_writel(host, R21C_STATUS, 0x18);
+		/* write data */
+		while (len) {
+			size = min(len, 4);
+			len -= size;
+			while (size) {
+				data >>= 8;
+				data |= (u32)*buf << 24;
+				buf++;
+				size--;
+			}
+			sdricoh_writel(host, R230_DATA, data);
+		}
+	}
+
+	if (len)
+		return -EIO;
+
+	return 0;
+}
+
+static void sdricoh_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct sdricoh_host *host = mmc_priv(mmc);
+	struct mmc_command *cmd = mrq->cmd;
+	struct mmc_data *data = cmd->data;
+	struct device *dev = host->dev;
+	unsigned char opcode = cmd->opcode;
+	int i;
+
+	dev_dbg(dev, "=============================\n");
+	dev_dbg(dev, "sdricoh_request opcode=%i\n", opcode);
+
+	sdricoh_writel(host, R21C_STATUS, 0x18);
+
+	/* MMC_APP_CMDs need some special handling */
+	if (host->app_cmd) {
+		opcode |= 64;
+		host->app_cmd = 0;
+	} else if (opcode == 55)
+		host->app_cmd = 1;
+
+	/* read/write commands seem to require this */
+	if (data) {
+		sdricoh_writew(host, R226_BLOCKSIZE, data->blksz);
+		sdricoh_writel(host, R208_DATAIO, 0);
+	}
+
+	cmd->error = sdricoh_mmc_cmd(host, opcode, cmd->arg);
+
+	/* read response buffer */
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		if (cmd->flags & MMC_RSP_136) {
+			/* CRC is stripped so we need to do some shifting. */
+			for (i = 0; i < 4; i++) {
+				cmd->resp[i] =
+				    sdricoh_readl(host,
+						  R20C_RESP + (3 - i) * 4) << 8;
+				if (i != 3)
+					cmd->resp[i] |=
+					    sdricoh_readb(host, R20C_RESP +
+							  (3 - i) * 4 - 1);
+			}
+		} else
+			cmd->resp[0] = sdricoh_readl(host, R20C_RESP);
+	}
+
+	/* transfer data */
+	if (data && cmd->error == 0) {
+		dev_dbg(dev, "transfer: blksz %i blocks %i sg_len %i "
+			"sg length %i\n", data->blksz, data->blocks,
+			data->sg_len, data->sg->length);
+
+		/* enter data reading mode */
+		sdricoh_writel(host, R21C_STATUS, 0x837f031e);
+		for (i = 0; i < data->blocks; i++) {
+			size_t len = data->blksz;
+			u8 *buf;
+			struct page *page;
+			int result;
+			page = sg_page(data->sg);
+
+			buf = kmap(page) + data->sg->offset + (len * i);
+			result =
+				sdricoh_blockio(host,
+					data->flags & MMC_DATA_READ, buf, len);
+			kunmap(page);
+			flush_dcache_page(page);
+			if (result) {
+				dev_err(dev, "sdricoh_request: cmd %i "
+					"block transfer failed\n", cmd->opcode);
+				cmd->error = result;
+				break;
+			} else
+				data->bytes_xfered += len;
+		}
+
+		sdricoh_writel(host, R208_DATAIO, 1);
+
+		if (sdricoh_query_status(host, STATUS_TRANSFER_FINISHED,
+					TRANSFER_TIMEOUT)) {
+			dev_err(dev, "sdricoh_request: transfer end error\n");
+			cmd->error = -EINVAL;
+		}
+	}
+	/* FIXME check busy flag */
+
+	mmc_request_done(mmc, mrq);
+	dev_dbg(dev, "=============================\n");
+}
+
+static void sdricoh_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct sdricoh_host *host = mmc_priv(mmc);
+	dev_dbg(host->dev, "set_ios\n");
+
+	if (ios->power_mode == MMC_POWER_ON) {
+		sdricoh_writel(host, R228_POWER, 0xc0e0);
+
+		if (ios->bus_width == MMC_BUS_WIDTH_4) {
+			sdricoh_writel(host, R224_MODE, 0x2000300);
+			sdricoh_writel(host, R228_POWER, 0x40e0);
+		} else {
+			sdricoh_writel(host, R224_MODE, 0x2000340);
+		}
+
+	} else if (ios->power_mode == MMC_POWER_UP) {
+		sdricoh_writel(host, R224_MODE, 0x2000320);
+		sdricoh_writel(host, R228_POWER, 0xe0);
+	}
+}
+
+static int sdricoh_get_ro(struct mmc_host *mmc)
+{
+	struct sdricoh_host *host = mmc_priv(mmc);
+	unsigned int status;
+
+	status = sdricoh_readl(host, R21C_STATUS);
+	sdricoh_writel(host, R2E4_STATUS_RESP, status);
+
+	/* some notebooks seem to have the locked flag switched */
+	if (switchlocked)
+		return !(status & STATUS_CARD_LOCKED);
+
+	return (status & STATUS_CARD_LOCKED);
+}
+
+static struct mmc_host_ops sdricoh_ops = {
+	.request = sdricoh_request,
+	.set_ios = sdricoh_set_ios,
+	.get_ro = sdricoh_get_ro,
+};
+
+/* initialize the control and register it to the mmc framework */
+static int sdricoh_init_mmc(struct pci_dev *pci_dev,
+			    struct pcmcia_device *pcmcia_dev)
+{
+	int result = 0;
+	void __iomem *iobase = NULL;
+	struct mmc_host *mmc = NULL;
+	struct sdricoh_host *host = NULL;
+	struct device *dev = &pcmcia_dev->dev;
+	/* map iomem */
+	if (pci_resource_len(pci_dev, SDRICOH_PCI_REGION) !=
+	    SDRICOH_PCI_REGION_SIZE) {
+		dev_dbg(dev, "unexpected pci resource len\n");
+		return -ENODEV;
+	}
+	iobase =
+	    pci_iomap(pci_dev, SDRICOH_PCI_REGION, SDRICOH_PCI_REGION_SIZE);
+	if (!iobase) {
+		dev_err(dev, "unable to map iobase\n");
+		return -ENODEV;
+	}
+	/* check version? */
+	if (readl(iobase + R104_VERSION) != 0x4000) {
+		dev_dbg(dev, "no supported mmc controller found\n");
+		result = -ENODEV;
+		goto err;
+	}
+	/* allocate privdata */
+	mmc = pcmcia_dev->priv =
+	    mmc_alloc_host(sizeof(struct sdricoh_host), &pcmcia_dev->dev);
+	if (!mmc) {
+		dev_err(dev, "mmc_alloc_host failed\n");
+		result = -ENOMEM;
+		goto err;
+	}
+	host = mmc_priv(mmc);
+
+	host->iobase = iobase;
+	host->dev = dev;
+	host->pci_dev = pci_dev;
+
+	mmc->ops = &sdricoh_ops;
+
+	/* FIXME: frequency and voltage handling is done by the controller
+	 */
+	mmc->f_min = 450000;
+	mmc->f_max = 24000000;
+	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+	mmc->caps |= MMC_CAP_4_BIT_DATA;
+
+	mmc->max_seg_size = 1024 * 512;
+	mmc->max_blk_size = 512;
+
+	/* reset the controler */
+	if (sdricoh_reset(host)) {
+		dev_dbg(dev, "could not reset\n");
+		result = -EIO;
+		goto err;
+
+	}
+
+	result = mmc_add_host(mmc);
+
+	if (!result) {
+		dev_dbg(dev, "mmc host registered\n");
+		return 0;
+	}
+
+err:
+	if (iobase)
+		iounmap(iobase);
+	if (mmc)
+		mmc_free_host(mmc);
+
+	return result;
+}
+
+/* search for supported mmc controllers */
+static int sdricoh_pcmcia_probe(struct pcmcia_device *pcmcia_dev)
+{
+	struct pci_dev *pci_dev = NULL;
+
+	dev_info(&pcmcia_dev->dev, "Searching MMC controller for pcmcia device"
+		" %s %s ...\n", pcmcia_dev->prod_id[0], pcmcia_dev->prod_id[1]);
+
+	/* search pci cardbus bridge that contains the mmc controler */
+	/* the io region is already claimed by yenta_socket... */
+	while ((pci_dev =
+		pci_get_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476,
+			       pci_dev))) {
+		/* try to init the device */
+		if (!sdricoh_init_mmc(pci_dev, pcmcia_dev)) {
+			dev_info(&pcmcia_dev->dev, "MMC controller found\n");
+			return 0;
+		}
+
+	}
+	dev_err(&pcmcia_dev->dev, "No MMC controller was found.\n");
+	return -ENODEV;
+}
+
+static void sdricoh_pcmcia_detach(struct pcmcia_device *link)
+{
+	struct mmc_host *mmc = link->priv;
+
+	dev_dbg(&link->dev, "detach\n");
+
+	/* remove mmc host */
+	if (mmc) {
+		struct sdricoh_host *host = mmc_priv(mmc);
+		mmc_remove_host(mmc);
+		pci_iounmap(host->pci_dev, host->iobase);
+		pci_dev_put(host->pci_dev);
+		mmc_free_host(mmc);
+	}
+	pcmcia_disable_device(link);
+
+}
+
+#ifdef CONFIG_PM
+static int sdricoh_pcmcia_suspend(struct pcmcia_device *link)
+{
+	struct mmc_host *mmc = link->priv;
+	dev_dbg(&link->dev, "suspend\n");
+	mmc_suspend_host(mmc, PMSG_SUSPEND);
+	return 0;
+}
+
+static int sdricoh_pcmcia_resume(struct pcmcia_device *link)
+{
+	struct mmc_host *mmc = link->priv;
+	dev_dbg(&link->dev, "resume\n");
+	sdricoh_reset(mmc_priv(mmc));
+	mmc_resume_host(mmc);
+	return 0;
+}
+#else
+#define sdricoh_pcmcia_suspend NULL
+#define sdricoh_pcmcia_resume NULL
+#endif
+
+static struct pcmcia_driver sdricoh_driver = {
+	.drv = {
+		.name = DRIVER_NAME,
+		},
+	.probe = sdricoh_pcmcia_probe,
+	.remove = sdricoh_pcmcia_detach,
+	.id_table = pcmcia_ids,
+	.suspend = sdricoh_pcmcia_suspend,
+	.resume = sdricoh_pcmcia_resume,
+};
+
+/*****************************************************************************\
+ *                                                                           *
+ * Driver init/exit                                                          *
+ *                                                                           *
+\*****************************************************************************/
+
+static int __init sdricoh_drv_init(void)
+{
+	return pcmcia_register_driver(&sdricoh_driver);
+}
+
+static void __exit sdricoh_drv_exit(void)
+{
+	pcmcia_unregister_driver(&sdricoh_driver);
+}
+
+module_init(sdricoh_drv_init);
+module_exit(sdricoh_drv_exit);
+
+module_param(switchlocked, uint, 0444);
+
+MODULE_AUTHOR("Sascha Sommer <saschasommer@freenet.de>");
+MODULE_DESCRIPTION("Ricoh PCMCIA Secure Digital Interface driver");
+MODULE_LICENSE("GPL");
+
+MODULE_PARM_DESC(switchlocked, "Switch the cards locked status."
+		"Use this when unlocked cards are shown readonly (default 0)");
--- MAINTAINERS.org	2008-07-11 20:32:48.000000000 +0200
+++ MAINTAINERS	2008-07-11 20:39:14.000000000 +0200
@@ -3522,6 +3522,12 @@
 M:	jim.cromie@gmail.com
 S:	Maintained
 
+SDRICOH_CS MMC/SD HOST CONTROLLER INTERFACE DRIVER
+P:	Sascha Sommer
+M:	saschasommer@freenet.de
+L:	sdricohcs-devel@lists.sourceforge.net (subscribers-only)
+S:	Maintained
+
 SECURITY CONTACT
 P:	Security Officers
 M:	security@kernel.org

  reply	other threads:[~2008-07-11 18:45 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-07-05  9:50 Status of Ricoh Bay1Controller driver? Pierre Ossman
2008-07-05 19:11 ` Sascha Sommer
2008-07-05 23:24   ` Pierre Ossman
2008-07-06  7:09     ` Sascha Sommer
2008-07-06 17:49       ` Pierre Ossman
2008-07-11 18:45         ` Sascha Sommer [this message]
2008-07-15 12:18           ` Pierre Ossman
2008-07-15 12:28             ` Sascha Sommer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200807112045.49809.saschasommer@freenet.de \
    --to=saschasommer@freenet.de \
    --cc=drzeus-list@drzeus.cx \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sdricohcs-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox