Re: [PATCH] leds: implement OpenFirmare GPIO LED driver

[Anton Vorontsov <avorontsov@ru.mvista.com>]

Hello Stephen,

On Tue, Jul 15, 2008 at 01:10:04PM +1000, Stephen Rothwell wrote:
[...]
> > +	led->np = np;
> 
> You need to take a reference if you are keeping a pointer to a
> device_node, so:
> 	led->np = of_node_get(np);
> 
> > +	led->cdev.name = of_get_property(np, "label", NULL);
> > +	if (!led->cdev.name)
> > +		led->cdev.name = ofdev->dev.bus_id;
> 
> Please use dev_name() in new code:
> 		led->cdev.name = dev_name(&ofdev->dev);
> 
> > +	led->cdev.brightness_set = gpio_led_set;
> > +
> > +	ret = gpio_request(led->gpio, ofdev->dev.bus_id);
> 
> dev_name() again.
> 
> > +err_get_gpio:
> 
> 	of_node_put(led->np);
> 
> > +	kfree(led);
> > +	return ret;
> > +}
> > +
> > +static int __devexit of_gpio_leds_remove(struct of_device *ofdev)
> > +{
> > +	struct of_gpio_led *led = dev_get_drvdata(&ofdev->dev);
> > +
> > +	led_classdev_unregister(&led->cdev);
> > +	cancel_work_sync(&led->work);
> > +	gpio_free(led->gpio);
> > +	of_node_put(led->np);
> 
> This was going to be unbalanced, but is now correct.

Thank you so much for the review, corrected version follows.

-- 
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2