* binutils 2.18.50.0.8 frv build error
@ 2008-07-15 12:13 Adrian Bunk
2008-07-15 13:20 ` H.J. Lu
0 siblings, 1 reply; 5+ messages in thread
From: Adrian Bunk @ 2008-07-15 12:13 UTC (permalink / raw)
To: dhowells, H.J. Lu, sam; +Cc: linux-kernel, linux-kbuild
Toolchain:
- gcc 4.3.1
- binutils 2.18.50.0.7 and 2.18.50.0.8
- configured for frv-linux
- kernel 2.6.26
Builds fine when using binutils 2.18.50.0.7,
but fails as follows with binutils 2.18.50.0.8:
<-- snip -->
...
HOSTCC scripts/kallsyms
CC init/main.o
CHK include/linux/compile.h
UPD include/linux/compile.h
CC init/version.o
CC init/do_mounts.o
LD init/mounts.o
CC init/noinitramfs.o
LD init/built-in.o
frv-linux-ld: init/mounts.o: compiled with -fpic and linked with modules that use non-pic relocations
frv-linux-ld: failed to merge target specific data of file init/mounts.o
make[2]: *** [init/built-in.o] Error 1
<-- snip -->
Complete verbose log below.
Any hints what's going wrong?
cu
Adrian
make -f /tmp/linux-2.6.26/Makefile silentoldconfig
make -f scripts/Makefile.build obj=scripts/basic
mkdir -p include/linux include/config
make -f scripts/Makefile.build obj=scripts/kconfig silentoldconfig
scripts/kconfig/conf -s arch/frv/Kconfig
rm -f include/config/kernel.release
echo 2.6.26 > include/config/kernel.release
set -e; :; mkdir -p include/linux/; (echo \#define LINUX_VERSION_CODE 132634; echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';) < /tmp/linux-2.6.26/Makefile > include/linux/version.h.tmp; if [ -r include/linux/version.h ] && cmp -s include/linux/version.h include/linux/version.h.tmp; then rm -f include/linux/version.h.tmp; else :; mv -f include/linux/version.h.tmp include/linux/version.h; fi
set -e; :; mkdir -p include/linux/; if [ `echo -n "2.6.26" | wc -c ` -gt 64 ]; then echo '"2.6.26" exceeds 64 characters' >&2; exit 1; fi; (echo \#define UTS_RELEASE \"2.6.26\";) < include/config/kernel.release > include/linux/utsrelease.h.tmp; if [ -r include/linux/utsrelease.h ] && cmp -s include/linux/utsrelease.h include/linux/utsrelease.h.tmp; then rm -f include/linux/utsrelease.h.tmp; else :; mv -f include/linux/utsrelease.h.tmp include/linux/utsrelease.h; fi
set -e; asmlink=`readlink include/asm | cut -d '-' -f 2`; \
if [ -L include/asm ]; then \
if [ "$asmlink" != "frv" ]; then \
echo "ERROR: the symlink include/asm points to asm-$asmlink but asm-frv was expected"; \
echo " set ARCH or save .config and run 'make mrproper' to fix it"; \
exit 1; \
fi; \
else \
echo ' SYMLINK include/asm -> include/asm-frv'; \
if [ ! -d include ]; then \
mkdir -p include; \
fi; \
ln -fsn asm-frv include/asm; \
fi
SYMLINK include/asm -> include/asm-frv
mkdir -p .tmp_versions ; rm -f .tmp_versions/*
make -f scripts/Makefile.build obj=scripts/basic
(cat /dev/null; ) > scripts/basic/modules.order
make -f scripts/Makefile.build obj=.
(cat /dev/null; ) > modules.order
mkdir -p kernel/
frv-linux-gcc -Wp,-MD,kernel/.bounds.s.d -nostdinc -isystem /usr/local/DIR/gcc-frv-4.3.1/lib/gcc/frv-linux/4.3.1/include -D__KERNEL__ -Iinclude -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -O2 -fno-stack-protector -G4 -mno-linked-fp -mcpu=fr450 -mno-fdpic -mgpr-32 -msoft-float -mno-media -ffixed-fcc3 -ffixed-cc3 -ffixed-gr15 -ffixed-icc2 -fomit-frame-pointer -Wdeclaration-after-statement -Wno-pointer-sign -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(bounds)" -D"KBUILD_MODNAME=KBUILD_STR(bounds)" -fverbose-asm -S -o kernel/bounds.s kernel/bounds.c
mkdir -p include/linux/
(set -e; echo "#ifndef __LINUX_BOUNDS_H__"; echo "#define __LINUX_BOUNDS_H__"; echo "/*"; echo " * DO NOT MODIFY."; echo " *"; echo " * This file was generated by Kbuild"; echo " *"; echo " */"; echo ""; sed -ne "/^->/{s:->#\(.*\):/* \1 */:; s:^->\([^ ]*\) [\$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}" kernel/bounds.s; echo ""; echo "#endif" ) > include/linux/bounds.h
mkdir -p arch/frv/kernel/
frv-linux-gcc -Wp,-MD,arch/frv/kernel/.asm-offsets.s.d -nostdinc -isystem /usr/local/DIR/gcc-frv-4.3.1/lib/gcc/frv-linux/4.3.1/include -D__KERNEL__ -Iinclude -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -O2 -fno-stack-protector -G4 -mno-linked-fp -mcpu=fr450 -mno-fdpic -mgpr-32 -msoft-float -mno-media -ffixed-fcc3 -ffixed-cc3 -ffixed-gr15 -ffixed-icc2 -fomit-frame-pointer -Wdeclaration-after-statement -Wno-pointer-sign -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(asm_offsets)" -D"KBUILD_MODNAME=KBUILD_STR(asm_offsets)" -fverbose-asm -S -o arch/frv/kernel/asm-offsets.s arch/frv/kernel/asm-offsets.c
mkdir -p include/asm-frv/
(set -e; echo "#ifndef __ASM_OFFSETS_H__"; echo "#define __ASM_OFFSETS_H__"; echo "/*"; echo " * DO NOT MODIFY."; echo " *"; echo " * This file was generated by Kbuild"; echo " *"; echo " */"; echo ""; sed -ne "/^->/{s:->#\(.*\):/* \1 */:; s:^->\([^ ]*\) [\$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}" arch/frv/kernel/asm-offsets.s; echo ""; echo "#endif" ) > include/asm-frv/asm-offsets.h
make -f scripts/Makefile.build obj=. missing-syscalls
/bin/sh scripts/checksyscalls.sh frv-linux-gcc -Wp,-MD,./.missing-syscalls.d -nostdinc -isystem /usr/local/DIR/gcc-frv-4.3.1/lib/gcc/frv-linux/4.3.1/include -D__KERNEL__ -Iinclude -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -O2 -fno-stack-protector -G4 -mno-linked-fp -mcpu=fr450 -mno-fdpic -mgpr-32 -msoft-float -mno-media -ffixed-fcc3 -ffixed-cc3 -ffixed-gr15 -ffixed-icc2 -fomit-frame-pointer -Wdeclaration-after-statement -Wno-pointer-sign -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(missing_syscalls)" -D"KBUILD_MODNAME=KBUILD_STR(missing_syscalls)"
<stdin>:461:2: warning: #warning syscall mmap not implemented
make -f scripts/Makefile.build obj=scripts
make -f scripts/Makefile.build obj=scripts/mod
(cat /dev/null; ) > scripts/mod/modules.order
frv-linux-gcc -Wp,-MD,scripts/mod/.empty.o.d -nostdinc -isystem /usr/local/DIR/gcc-frv-4.3.1/lib/gcc/frv-linux/4.3.1/include -D__KERNEL__ -Iinclude -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -O2 -fno-stack-protector -G4 -mno-linked-fp -mcpu=fr450 -mno-fdpic -mgpr-32 -msoft-float -mno-media -ffixed-fcc3 -ffixed-cc3 -ffixed-gr15 -ffixed-icc2 -fomit-frame-pointer -Wdeclaration-after-statement -Wno-pointer-sign -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(empty)" -D"KBUILD_MODNAME=KBUILD_STR(empty)" -c -o scripts/mod/empty.o scripts/mod/empty.c
gcc -Wp,-MD,scripts/mod/.mk_elfconfig.d -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -o scripts/mod/mk_elfconfig scripts/mod/mk_elfconfig.c
scripts/mod/mk_elfconfig frv < scripts/mod/empty.o > scripts/mod/elfconfig.h
gcc -Wp,-MD,scripts/mod/.file2alias.o.d -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -c -o scripts/mod/file2alias.o scripts/mod/file2alias.c
gcc -Wp,-MD,scripts/mod/.modpost.o.d -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -c -o scripts/mod/modpost.o scripts/mod/modpost.c
gcc -Wp,-MD,scripts/mod/.sumversion.o.d -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -c -o scripts/mod/sumversion.o scripts/mod/sumversion.c
gcc -o scripts/mod/modpost scripts/mod/modpost.o scripts/mod/file2alias.o scripts/mod/sumversion.o
(cat /dev/null; ) > scripts/modules.order
gcc -Wp,-MD,scripts/.kallsyms.d -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -o scripts/kallsyms scripts/kallsyms.c
make -f scripts/Makefile.build obj=init
frv-linux-gcc -Wp,-MD,init/.main.o.d -nostdinc -isystem /usr/local/DIR/gcc-frv-4.3.1/lib/gcc/frv-linux/4.3.1/include -D__KERNEL__ -Iinclude -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -O2 -fno-stack-protector -G4 -mno-linked-fp -mcpu=fr450 -mno-fdpic -mgpr-32 -msoft-float -mno-media -ffixed-fcc3 -ffixed-cc3 -ffixed-gr15 -ffixed-icc2 -fomit-frame-pointer -Wdeclaration-after-statement -Wno-pointer-sign -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(main)" -D"KBUILD_MODNAME=KBUILD_STR(main)" -c -o init/main.o init/main.c
/bin/sh /tmp/linux-2.6.26/scripts/mkcompile_h include/linux/compile.h \
"frv" "" "" "frv-linux-gcc -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -O2 -fno-stack-protector -G4 -mno-linked-fp -mcpu=fr450 -mno-fdpic -mgpr-32 -msoft-float -mno-media -ffixed-fcc3 -ffixed-cc3 -ffixed-gr15 -ffixed-icc2 -fomit-frame-pointer -Wdeclaration-after-statement -Wno-pointer-sign"
UPD include/linux/compile.h
frv-linux-gcc -Wp,-MD,init/.version.o.d -nostdinc -isystem /usr/local/DIR/gcc-frv-4.3.1/lib/gcc/frv-linux/4.3.1/include -D__KERNEL__ -Iinclude -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -O2 -fno-stack-protector -G4 -mno-linked-fp -mcpu=fr450 -mno-fdpic -mgpr-32 -msoft-float -mno-media -ffixed-fcc3 -ffixed-cc3 -ffixed-gr15 -ffixed-icc2 -fomit-frame-pointer -Wdeclaration-after-statement -Wno-pointer-sign -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(version)" -D"KBUILD_MODNAME=KBUILD_STR(version)" -c -o init/version.o init/version.c
frv-linux-gcc -Wp,-MD,init/.do_mounts.o.d -nostdinc -isystem /usr/local/DIR/gcc-frv-4.3.1/lib/gcc/frv-linux/4.3.1/include -D__KERNEL__ -Iinclude -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -O2 -fno-stack-protector -G4 -mno-linked-fp -mcpu=fr450 -mno-fdpic -mgpr-32 -msoft-float -mno-media -ffixed-fcc3 -ffixed-cc3 -ffixed-gr15 -ffixed-icc2 -fomit-frame-pointer -Wdeclaration-after-statement -Wno-pointer-sign -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(do_mounts)" -D"KBUILD_MODNAME=KBUILD_STR(mounts)" -c -o init/do_mounts.o init/do_mounts.c
frv-linux-ld -r -o init/mounts.o init/do_mounts.o
frv-linux-gcc -Wp,-MD,init/.noinitramfs.o.d -nostdinc -isystem /usr/local/DIR/gcc-frv-4.3.1/lib/gcc/frv-linux/4.3.1/include -D__KERNEL__ -Iinclude -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -O2 -fno-stack-protector -G4 -mno-linked-fp -mcpu=fr450 -mno-fdpic -mgpr-32 -msoft-float -mno-media -ffixed-fcc3 -ffixed-cc3 -ffixed-gr15 -ffixed-icc2 -fomit-frame-pointer -Wdeclaration-after-statement -Wno-pointer-sign -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(noinitramfs)" -D"KBUILD_MODNAME=KBUILD_STR(noinitramfs)" -c -o init/noinitramfs.o init/noinitramfs.c
frv-linux-ld -r -o init/built-in.o init/main.o init/version.o init/mounts.o init/noinitramfs.o
frv-linux-ld: init/mounts.o: compiled with -fpic and linked with modules that use non-pic relocations
frv-linux-ld: failed to merge target specific data of file init/mounts.o
make[1]: *** [init/built-in.o] Error 1
make: *** [init] Error 2
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: binutils 2.18.50.0.8 frv build error
2008-07-15 12:13 binutils 2.18.50.0.8 frv build error Adrian Bunk
@ 2008-07-15 13:20 ` H.J. Lu
2008-07-15 13:47 ` Adrian Bunk
0 siblings, 1 reply; 5+ messages in thread
From: H.J. Lu @ 2008-07-15 13:20 UTC (permalink / raw)
To: Adrian Bunk; +Cc: dhowells, sam, linux-kernel, linux-kbuild
On Tue, Jul 15, 2008 at 03:13:27PM +0300, Adrian Bunk wrote:
> Toolchain:
> - gcc 4.3.1
> - binutils 2.18.50.0.7 and 2.18.50.0.8
> - configured for frv-linux
> - kernel 2.6.26
>
> Builds fine when using binutils 2.18.50.0.7,
> but fails as follows with binutils 2.18.50.0.8:
>
> <-- snip -->
>
> ...
> HOSTCC scripts/kallsyms
> CC init/main.o
> CHK include/linux/compile.h
> UPD include/linux/compile.h
> CC init/version.o
> CC init/do_mounts.o
> LD init/mounts.o
> CC init/noinitramfs.o
> LD init/built-in.o
> frv-linux-ld: init/mounts.o: compiled with -fpic and linked with modules that use non-pic relocations
> frv-linux-ld: failed to merge target specific data of file init/mounts.o
> make[2]: *** [init/built-in.o] Error 1
>
> <-- snip -->
>
> Complete verbose log below.
>
> Any hints what's going wrong?
>
> cu
> Adrian
>
>
...
> frv-linux-ld -r -o init/built-in.o init/main.o init/version.o init/mounts.o init/noinitramfs.o
> frv-linux-ld: init/mounts.o: compiled with -fpic and linked with modules that use non-pic relocations
> frv-linux-ld: failed to merge target specific data of file init/mounts.o
> make[1]: *** [init/built-in.o] Error 1
> make: *** [init] Error 2
This regression was introduced between 2008-05-02 10:10am and
2008-07-09 5:45pm PDT. Does ld from binutils 2.18.50.0.7 work
on the same init/main.o init/version.o init/mounts.o
init/noinitramfs.o? If yes, please open a bug report at
http://www.sourceware.org/bugzilla/
with those .o files. If not, please find out why.
Thanks.
H.J.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: binutils 2.18.50.0.8 frv build error
2008-07-15 13:20 ` H.J. Lu
@ 2008-07-15 13:47 ` Adrian Bunk
2008-07-15 14:00 ` H.J. Lu
0 siblings, 1 reply; 5+ messages in thread
From: Adrian Bunk @ 2008-07-15 13:47 UTC (permalink / raw)
To: H.J. Lu; +Cc: dhowells, sam, linux-kernel, linux-kbuild
On Tue, Jul 15, 2008 at 06:20:05AM -0700, H.J. Lu wrote:
> On Tue, Jul 15, 2008 at 03:13:27PM +0300, Adrian Bunk wrote:
> > Toolchain:
> > - gcc 4.3.1
> > - binutils 2.18.50.0.7 and 2.18.50.0.8
> > - configured for frv-linux
> > - kernel 2.6.26
> >
> > Builds fine when using binutils 2.18.50.0.7,
> > but fails as follows with binutils 2.18.50.0.8:
> >
> > <-- snip -->
> >
> > ...
> > HOSTCC scripts/kallsyms
> > CC init/main.o
> > CHK include/linux/compile.h
> > UPD include/linux/compile.h
> > CC init/version.o
> > CC init/do_mounts.o
> > LD init/mounts.o
> > CC init/noinitramfs.o
> > LD init/built-in.o
> > frv-linux-ld: init/mounts.o: compiled with -fpic and linked with modules that use non-pic relocations
> > frv-linux-ld: failed to merge target specific data of file init/mounts.o
> > make[2]: *** [init/built-in.o] Error 1
> >
> > <-- snip -->
> >
> > Complete verbose log below.
> >
> > Any hints what's going wrong?
> >
> > cu
> > Adrian
> >
> >
>
> ...
>
> > frv-linux-ld -r -o init/built-in.o init/main.o init/version.o init/mounts.o init/noinitramfs.o
> > frv-linux-ld: init/mounts.o: compiled with -fpic and linked with modules that use non-pic relocations
> > frv-linux-ld: failed to merge target specific data of file init/mounts.o
> > make[1]: *** [init/built-in.o] Error 1
> > make: *** [init] Error 2
>
> This regression was introduced between 2008-05-02 10:10am and
> 2008-07-09 5:45pm PDT. Does ld from binutils 2.18.50.0.7 work
> on the same init/main.o init/version.o init/mounts.o
> init/noinitramfs.o? If yes, please open a bug report at
>
> http://www.sourceware.org/bugzilla/
No, it does not work with these .o files.
> with those .o files. If not, please find out why.
Tried it the other way round:
- compiled with 2.18.50.0.7.
- then changed binutils to 2.18.50.0.8
Works:
frv-linux-ld -r -o init/built-in.o init/main.o init/version.o init/mounts.o init/noinitramfs.o
Fails:
frv-linux-ld -r -o init/mounts.o init/do_mounts.o
frv-linux-ld -r -o init/built-in.o init/main.o init/version.o init/mounts.o init/noinitramfs.o
I did an "frv-linux-objdump -Dx" on the init/mounts.o files generated
with both binutils versions, and the diff is:
--- working 2008-07-15 16:34:49.000000000 +0300
+++ broken 2008-07-15 16:34:40.000000000 +0300
architecture: fr450, flags 0x00000011:
HAS_RELOC, HAS_SYMS
start address 0x00000000
-private flags = 0x800020d: -mcpu=fr450 -mgpr-32 -msoft-float non-pic relocations
+private flags = 0x800030d: -mcpu=fr450 -mgpr-32 -msoft-float -fpic non-pic relocations
Sections:
Idx Name Size VMA LMA File off Algn
Is this an ld bug?
> Thanks.
>
> H.J.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: binutils 2.18.50.0.8 frv build error
2008-07-15 13:47 ` Adrian Bunk
@ 2008-07-15 14:00 ` H.J. Lu
2008-07-15 14:23 ` Adrian Bunk
0 siblings, 1 reply; 5+ messages in thread
From: H.J. Lu @ 2008-07-15 14:00 UTC (permalink / raw)
To: Adrian Bunk; +Cc: dhowells, sam, linux-kernel, linux-kbuild
On Tue, Jul 15, 2008 at 04:47:47PM +0300, Adrian Bunk wrote:
> On Tue, Jul 15, 2008 at 06:20:05AM -0700, H.J. Lu wrote:
> > On Tue, Jul 15, 2008 at 03:13:27PM +0300, Adrian Bunk wrote:
> > > Toolchain:
> > > - gcc 4.3.1
> > > - binutils 2.18.50.0.7 and 2.18.50.0.8
> > > - configured for frv-linux
> > > - kernel 2.6.26
> > >
> > > Builds fine when using binutils 2.18.50.0.7,
> > > but fails as follows with binutils 2.18.50.0.8:
> > >
> > > <-- snip -->
> > >
> > > ...
> > > HOSTCC scripts/kallsyms
> > > CC init/main.o
> > > CHK include/linux/compile.h
> > > UPD include/linux/compile.h
> > > CC init/version.o
> > > CC init/do_mounts.o
> > > LD init/mounts.o
> > > CC init/noinitramfs.o
> > > LD init/built-in.o
> > > frv-linux-ld: init/mounts.o: compiled with -fpic and linked with modules that use non-pic relocations
> > > frv-linux-ld: failed to merge target specific data of file init/mounts.o
> > > make[2]: *** [init/built-in.o] Error 1
> > >
> > > <-- snip -->
> > >
> > > Complete verbose log below.
> > >
> > > Any hints what's going wrong?
> > >
> > > cu
> > > Adrian
> > >
> > >
> >
> > ...
> >
> > > frv-linux-ld -r -o init/built-in.o init/main.o init/version.o init/mounts.o init/noinitramfs.o
> > > frv-linux-ld: init/mounts.o: compiled with -fpic and linked with modules that use non-pic relocations
> > > frv-linux-ld: failed to merge target specific data of file init/mounts.o
> > > make[1]: *** [init/built-in.o] Error 1
> > > make: *** [init] Error 2
> >
> > This regression was introduced between 2008-05-02 10:10am and
> > 2008-07-09 5:45pm PDT. Does ld from binutils 2.18.50.0.7 work
> > on the same init/main.o init/version.o init/mounts.o
> > init/noinitramfs.o? If yes, please open a bug report at
> >
> > http://www.sourceware.org/bugzilla/
>
> No, it does not work with these .o files.
>
> > with those .o files. If not, please find out why.
>
> Tried it the other way round:
> - compiled with 2.18.50.0.7.
> - then changed binutils to 2.18.50.0.8
>
> Works:
> frv-linux-ld -r -o init/built-in.o init/main.o init/version.o init/mounts.o init/noinitramfs.o
>
> Fails:
> frv-linux-ld -r -o init/mounts.o init/do_mounts.o
> frv-linux-ld -r -o init/built-in.o init/main.o init/version.o init/mounts.o init/noinitramfs.o
>
>
> I did an "frv-linux-objdump -Dx" on the init/mounts.o files generated
> with both binutils versions, and the diff is:
>
>
> --- working 2008-07-15 16:34:49.000000000 +0300
> +++ broken 2008-07-15 16:34:40.000000000 +0300
> architecture: fr450, flags 0x00000011:
> HAS_RELOC, HAS_SYMS
> start address 0x00000000
> -private flags = 0x800020d: -mcpu=fr450 -mgpr-32 -msoft-float non-pic relocations
> +private flags = 0x800030d: -mcpu=fr450 -mgpr-32 -msoft-float -fpic non-pic relocations
>
Are you saying "ld -r init/do_mounts.o" changed private flags? If
yes, please open a bug report at
http://www.sourceware.org/bugzilla/
with the original init/do_mounts.o.
H.J.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: binutils 2.18.50.0.8 frv build error
2008-07-15 14:00 ` H.J. Lu
@ 2008-07-15 14:23 ` Adrian Bunk
0 siblings, 0 replies; 5+ messages in thread
From: Adrian Bunk @ 2008-07-15 14:23 UTC (permalink / raw)
To: H.J. Lu; +Cc: dhowells, sam, linux-kernel, linux-kbuild
On Tue, Jul 15, 2008 at 07:00:40AM -0700, H.J. Lu wrote:
> On Tue, Jul 15, 2008 at 04:47:47PM +0300, Adrian Bunk wrote:
>...
> > I did an "frv-linux-objdump -Dx" on the init/mounts.o files generated
> > with both binutils versions, and the diff is:
> >
> >
> > --- working 2008-07-15 16:34:49.000000000 +0300
> > +++ broken 2008-07-15 16:34:40.000000000 +0300
> > architecture: fr450, flags 0x00000011:
> > HAS_RELOC, HAS_SYMS
> > start address 0x00000000
> > -private flags = 0x800020d: -mcpu=fr450 -mgpr-32 -msoft-float non-pic relocations
> > +private flags = 0x800030d: -mcpu=fr450 -mgpr-32 -msoft-float -fpic non-pic relocations
> >
>
> Are you saying "ld -r init/do_mounts.o" changed private flags? If
> yes, please open a bug report at
It seems so.
> http://www.sourceware.org/bugzilla/
>
> with the original init/do_mounts.o.
Done, it's #6747.
> H.J.
Thanks for your help
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2008-07-15 14:23 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-07-15 12:13 binutils 2.18.50.0.8 frv build error Adrian Bunk
2008-07-15 13:20 ` H.J. Lu
2008-07-15 13:47 ` Adrian Bunk
2008-07-15 14:00 ` H.J. Lu
2008-07-15 14:23 ` Adrian Bunk
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox