From: David Fries <david@fries.net>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Subject: [PATCH 4/30] W1: w1_process, block or sleep
Date: Mon, 28 Jul 2008 21:14:43 -0500 [thread overview]
Message-ID: <20080729021443.GD24452@spacedout.fries.net> (raw)
In-Reply-To: <20080729020433.GA24424@spacedout.fries.net>
[-- Attachment #1: Type: text/plain, Size: 3616 bytes --]
The w1_process thread's sleeping and termination has been modified.
msleep_interruptible was replaced by schedule_timeout and schedule to
allow for kthread_stop and wake_up_process to interrupt the sleep and
the unbounded sleeping when a bus search is disabled. The
W1_MASTER_NEED_EXIT and flags variable were removed as they were
redundant with kthread_should_stop and kthread_stop. If w1_process is
sleeping, requesting a search will immediately wake it up rather than
waiting for the end of msleep_interruptible previously.
Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
---
drivers/w1/w1.c | 20 +++++++++++++++++---
drivers/w1/w1.h | 4 ----
drivers/w1/w1_int.c | 2 --
3 files changed, 17 insertions(+), 9 deletions(-)
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index 730faa4..9b5c117 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -251,6 +251,7 @@ static ssize_t w1_master_attribute_store_search(struct device * dev,
mutex_lock(&md->mutex);
md->search_count = simple_strtol(buf, NULL, 0);
mutex_unlock(&md->mutex);
+ wake_up_process(md->thread);
return count;
}
@@ -773,7 +774,7 @@ void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb
tmp64 = (triplet_ret >> 2);
rn |= (tmp64 << i);
- if (test_bit(W1_MASTER_NEED_EXIT, &dev->flags)) {
+ if (kthread_should_stop()) {
printk(KERN_INFO "Abort w1_search (exiting)\n");
return;
}
@@ -811,8 +812,12 @@ void w1_search_process(struct w1_master *dev, u8 search_type)
int w1_process(void *data)
{
struct w1_master *dev = (struct w1_master *) data;
+ /* As long as w1_timeout is only set by a module parameter the sleep
+ * time can be calculated in jiffies once.
+ */
+ const unsigned long jtime = msecs_to_jiffies(w1_timeout * 1000);
- while (!kthread_should_stop() && !test_bit(W1_MASTER_NEED_EXIT, &dev->flags)) {
+ while (!kthread_should_stop()) {
if (dev->search_count) {
mutex_lock(&dev->mutex);
w1_search_process(dev, W1_SEARCH);
@@ -820,7 +825,16 @@ int w1_process(void *data)
}
try_to_freeze();
- msleep_interruptible(w1_timeout * 1000);
+ __set_current_state(TASK_INTERRUPTIBLE);
+
+ if (kthread_should_stop())
+ break;
+
+ /* Only sleep when the search is active. */
+ if (dev->search_count)
+ schedule_timeout(jtime);
+ else
+ schedule();
}
atomic_dec(&dev->refcnt);
diff --git a/drivers/w1/w1.h b/drivers/w1/w1.h
index 13e0ea8..34ee01e 100644
--- a/drivers/w1/w1.h
+++ b/drivers/w1/w1.h
@@ -149,8 +149,6 @@ struct w1_bus_master
u8, w1_slave_found_callback);
};
-#define W1_MASTER_NEED_EXIT 0
-
struct w1_master
{
struct list_head w1_master_entry;
@@ -169,8 +167,6 @@ struct w1_master
void *priv;
int priv_size;
- long flags;
-
struct task_struct *thread;
struct mutex mutex;
diff --git a/drivers/w1/w1_int.c b/drivers/w1/w1_int.c
index 36ff402..bd877b2 100644
--- a/drivers/w1/w1_int.c
+++ b/drivers/w1/w1_int.c
@@ -142,7 +142,6 @@ int w1_add_master_device(struct w1_bus_master *master)
#if 0 /* Thread cleanup code, not required currently. */
err_out_kill_thread:
- set_bit(W1_MASTER_NEED_EXIT, &dev->flags);
kthread_stop(dev->thread);
#endif
err_out_rm_attr:
@@ -158,7 +157,6 @@ void __w1_remove_master_device(struct w1_master *dev)
struct w1_netlink_msg msg;
struct w1_slave *sl, *sln;
- set_bit(W1_MASTER_NEED_EXIT, &dev->flags);
kthread_stop(dev->thread);
mutex_lock(&w1_mlock);
--
1.4.4.4
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
next prev parent reply other threads:[~2008-07-29 2:16 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-29 2:04 [PATCH 0/30] W1: w1 core fixes, ds2490 updates, strong pullup David Fries
2008-07-29 2:10 ` [PATCH 1/30] W1: fix deadlocks and remove w1_control_thread David Fries
2008-07-29 2:12 ` [PATCH 2/30] W1: abort search early on on exit David Fries
2008-07-29 2:13 ` [PATCH 3/30] W1: don't delay search start David Fries
2008-07-29 2:14 ` David Fries [this message]
2008-07-29 2:14 ` [PATCH 5/30] W1: feature, enable hardware strong pullup David Fries
2008-07-29 23:21 ` Andrew Morton
2008-07-29 2:15 ` [PATCH 6/30] W1: feature, w1_therm.c use strong pullup and documentation David Fries
2008-07-29 2:17 ` [PATCH 7/30] W1: be able to manually add and remove slaves David Fries
2008-07-29 2:18 ` [PATCH 8/30] W1: recode w1_slave_found logic David Fries
2008-07-29 2:19 ` [PATCH 9/30] W1: new module parameter search_count David Fries
2008-07-29 2:20 ` [PATCH 10/30] W1: Document add, remove, search_count, and pullup David Fries
2008-07-29 2:21 ` [PATCH 11/30] W1: w1_slave_read_id read bug, use device_attribute David Fries
2008-07-29 2:21 ` [PATCH 12/30] W1: w1_therm fix user buffer overflow and cat David Fries
2008-07-29 2:21 ` [PATCH 13/30] W1: w1_family, remove unused variable need_exit David Fries
2008-07-29 2:22 ` [PATCH 14/30] W1: w1_therm consistent mutex access code cleanup David Fries
2008-07-29 2:23 ` [PATCH 15/30] W1: w1_int.c use first available master number David Fries
2008-07-29 2:23 ` [PATCH 16/30] W1: w1.c s/printk/dev_dbg/ David Fries
2008-07-29 2:24 ` [PATCH 17/30] W1: w1_io.c reset comments and msleep David Fries
2008-07-29 2:24 ` [PATCH 18/30] W1: ds1wm.c msleep for reset David Fries
2008-07-29 2:25 ` [PATCH 19/30] W1: ds2490.c correct print message David Fries
2008-07-29 2:25 ` [PATCH 20/30] W1: ds2490.c add support for strong pullup David Fries
2008-07-29 2:25 ` [PATCH 21/30] W1: ds2490.c ds_write_bit, grouping error, disable readback David Fries
2008-07-29 2:25 ` [PATCH 22/30] W1: ds2490.c disable bit read and write David Fries
2008-07-29 2:26 ` [PATCH 23/30] W1: ds2490.c simplify and fix ds_touch_bit David Fries
2008-07-29 2:26 ` [PATCH 24/30] W1: ds2490.c ds_dump_status rework David Fries
2008-07-29 2:26 ` [PATCH 25/30] W1: ds2490.c ds_reset remove ds_wait_status David Fries
2008-07-29 2:27 ` [PATCH 26/30] W1: ds2490.c reset ds2490 in init David Fries
2008-07-29 2:28 ` [PATCH 27/30] W1: ds2490.c magic number work David Fries
2008-07-29 2:28 ` [PATCH 28/30] W1: ds2490.c ds_write_block remove extra ds_wait_status David Fries
2008-07-29 2:29 ` [PATCH 29/30] W1: Documentation/w1/masters/ds2490 update David Fries
2008-07-29 2:30 ` [PATCH 30/30] W1: ds2490.c optimize ds_set_pullup David Fries
2008-07-29 23:13 ` [PATCH 0/30] W1: w1 core fixes, ds2490 updates, strong pullup Andrew Morton
2008-07-31 2:37 ` David Fries
2008-07-31 3:03 ` Andrew Morton
2008-07-31 2:47 ` [PATCH 1/30] W1: fix deadlocks and remove w1_control_thread David Fries
2008-07-31 2:48 ` [PATCH 2/30] W1: abort search early on on exit David Fries
2008-07-31 2:48 ` [PATCH 3/30] W1: don't delay search start David Fries
2008-07-31 2:48 ` [PATCH 4/30] W1: w1_process, block or sleep David Fries
2008-07-31 2:48 ` [PATCH 5/30] W1: feature, enable hardware strong pullup David Fries
2008-07-31 2:48 ` [PATCH 6/30] W1: feature, w1_therm.c use strong pullup and documentation David Fries
2008-07-31 2:48 ` [PATCH 7/30] W1: be able to manually add and remove slaves David Fries
2008-07-31 2:48 ` [PATCH 8/30] W1: recode w1_slave_found logic David Fries
2008-07-31 2:48 ` [PATCH 9/30] W1: new module parameter search_count David Fries
2008-07-31 2:49 ` [PATCH 10/30] W1: Document add, remove, search_count, and pullup David Fries
2008-07-31 2:49 ` [PATCH 11/30] W1: w1_slave_read_id read bug, use device_attribute David Fries
2008-07-31 2:49 ` [PATCH 12/30] W1: w1_therm fix user buffer overflow and cat David Fries
2008-07-31 2:49 ` [PATCH 13/30] W1: w1_family, remove unused variable need_exit David Fries
2008-07-31 2:49 ` [PATCH 14/30] W1: w1_therm consistent mutex access code cleanup David Fries
2008-07-31 2:49 ` [PATCH 15/30] W1: w1_int.c use first available master number David Fries
2008-07-31 2:49 ` [PATCH 16/30] W1: w1.c s/printk/dev_dbg/ David Fries
2008-07-31 2:49 ` [PATCH 17/30] W1: w1_io.c reset comments and msleep David Fries
2008-07-31 2:49 ` [PATCH 18/30] W1: ds1wm.c msleep for reset David Fries
2008-07-31 2:49 ` [PATCH 19/30] W1: ds2490.c correct print message David Fries
2008-07-31 2:49 ` [PATCH 20/30] W1: ds2490.c add support for strong pullup David Fries
2008-07-31 2:50 ` [PATCH 21/30] W1: ds2490.c ds_write_bit, grouping error, disable readback David Fries
2008-07-31 2:50 ` [PATCH 22/30] W1: ds2490.c disable bit read and write David Fries
2008-07-31 2:50 ` [PATCH 23/30] W1: ds2490.c simplify and fix ds_touch_bit David Fries
2008-07-31 2:50 ` [PATCH 24/30] W1: ds2490.c ds_dump_status rework David Fries
2008-07-31 2:50 ` [PATCH 25/30] W1: ds2490.c ds_reset remove ds_wait_status David Fries
2008-07-31 2:50 ` [PATCH 26/30] W1: ds2490.c reset ds2490 in init David Fries
2008-07-31 2:50 ` [PATCH 27/30] W1: ds2490.c magic number work David Fries
2008-07-31 2:50 ` [PATCH 28/30] W1: ds2490.c ds_write_block remove extra ds_wait_status David Fries
2008-07-31 2:50 ` [PATCH 29/30] W1: Documentation/w1/masters/ds2490 update David Fries
2008-07-31 2:50 ` [PATCH 30/30] W1: ds2490.c optimize ds_set_pullup David Fries
-- strict thread matches above, loose matches on Subject: below --
2008-07-11 13:51 w1 updates Evgeniy Polyakov
2008-07-11 13:51 ` [PATCH 4/30] W1: w1_process, block or sleep Evgeniy Polyakov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080729021443.GD24452@spacedout.fries.net \
--to=david@fries.net \
--cc=akpm@linux-foundation.org \
--cc=johnpol@2ka.mipt.ru \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox