From: Joshua Hoblitt <josh@hoblitt.com>
To: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
bugme-daemon@bugzilla.kernel.org, linux-kernel@vger.kernel.org,
j_kernel@hoblitt.com
Subject: Re: [Bug 11388] New: 2.6.27-rc3 warns about MTRR range; only 3 of 16gb of memory is usable
Date: Thu, 21 Aug 2008 14:10:47 -1000 [thread overview]
Message-ID: <20080822001047.GF23377@hoblitt.com> (raw)
In-Reply-To: <20080821233317.GE23377@hoblitt.com>
[-- Attachment #1: Type: text/plain, Size: 485 bytes --]
The dmesg from the tip kernel is attached and it's at least larger than
the last builds dmesg.
$ wc -l *.dmesg
683 2.6.27-r3.dmesg
829 2.6.27-rc4-tip.dmesg
-J
--
On Thu, Aug 21, 2008 at 01:33:17PM -1000, Joshua Hoblitt wrote:
> On Thu, Aug 21, 2008 at 02:51:43PM -0700, Yinghai Lu wrote:
> > can you check that with tip/master?
> >
> > http://people.redhat.com/mingo/tip.git/readme.txt
>
> I'm doing that now. Note that I was pulling from netdev-2.6 before.
>
> -J
>
> --
[-- Attachment #2: 2.6.27-rc4-tip.dmesg --]
[-- Type: text/plain, Size: 50871 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.27-rc4-tip-00862-gcc150c8 (root@ipp000) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #1 SMP Thu Aug 21 13:52:09 HST 2008
[ 0.000000] Command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0 console=ttyS0,115200n8
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
[ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff00000 (usable)
[ 0.000000] BIOS-e820: 00000000cff00000 - 00000000cff0a000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff0a000 - 00000000cff0b000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cff0b000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000430000000 (usable)
[ 0.000000] last_pfn = 0x430000 max_arch_pfn = 0x3ffffffff
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 13056MB of RAM.
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at arch/x86/kernel/cpu/mtrr/main.c:1558 mtrr_trim_uncached_memory+0x522/0x54b()
[ 0.000000] Modules linked in:
[ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc4-tip-00862-gcc150c8 #1
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff80237573>] warn_on_slowpath+0x51/0x77
[ 0.000000] [<ffffffff8023808b>] printk+0x4e/0x56
[ 0.000000] [<ffffffff803b1942>] sort+0xfa/0x18c
[ 0.000000] [<ffffffff80802a5b>] cmp_range+0x0/0x6
[ 0.000000] [<ffffffff808030e9>] mtrr_trim_uncached_memory+0x522/0x54b
[ 0.000000] [<ffffffff802194d9>] post_set+0x20/0x3d
[ 0.000000] [<ffffffff807ff4df>] setup_arch+0x39d/0x6d7
[ 0.000000] [<ffffffff8024702e>] kernel_text_address+0x9/0x26
[ 0.000000] [<ffffffff8024c4de>] notifier_chain_register+0x14/0x55
[ 0.000000] [<ffffffff807f8a1d>] start_kernel+0x74/0x346
[ 0.000000] [<ffffffff807f8394>] x86_64_start_kernel+0xe3/0xe7
[ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 0.000000] update e820 for mtrr
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 000000000009e400 (usable)
[ 0.000000] modified: 000000000009e400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000ca000 - 00000000000cc000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000cff00000 (usable)
[ 0.000000] modified: 00000000cff00000 - 00000000cff0a000 (ACPI data)
[ 0.000000] modified: 00000000cff0a000 - 00000000cff0b000 (ACPI NVS)
[ 0.000000] modified: 00000000cff0b000 - 00000000d0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000430000000 (reserved)
[ 0.000000] last_pfn = 0xcff00 max_arch_pfn = 0x3ffffffff
[ 0.000000] init_memory_mapping
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff00000 page 4k
[ 0.000000] kernel direct mapping tables up to cff00000 @ 8000-e000
[ 0.000000] last_map_addr: cff00000 end: cff00000
[ 0.000000] RAMDISK: 37e10000 - 37fef7d5
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F7020, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT CFF0395D, 005C (r1 PTLTD XSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP CFF09D60, 00F4 (r3 INTEL TUMWATER 6040000 PTL 3)
[ 0.000000] ACPI: DSDT CFF0599D, 434F (r1 Intel SEABURG 6040000 MSFT 3000000)
[ 0.000000] ACPI: FACS CFF0AFC0, 0040
[ 0.000000] ACPI: _MAR CFF09E54, 0030 (r1 Intel OEMDMAR 6040000 LOHR 1)
[ 0.000000] ACPI: APIC CFF09E84, 00C8 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: MCFG CFF09F4C, 003C (r1 PTLTD MCFG 6040000 LTP 0)
[ 0.000000] ACPI: BOOT CFF09F88, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SPCR CFF09FB0, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1)
[ 0.000000] ACPI: SSDT CFF039B9, 1405 (r1 PmRef CpuPm 3000 INTL 20050228)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000cff00000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000000cff00000
[ 0.000000] NODE_DATA [000000000000c000 - 0000000000016fff]
[ 0.000000] bootmap [0000000000017000 - 0000000000030fdf] pages 1a
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 00cff00000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00009beef0] TEXT DATA BSS ==> [0000200000 - 00009beef0]
[ 0.000000] #3 [0037e10000 - 0037fef7d5] RAMDISK ==> [0037e10000 - 0037fef7d5]
[ 0.000000] #4 [000009e400 - 0000100000] BIOS reserved ==> [000009e400 - 0000100000]
[ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
[ 0.000000] found SMP MP-table at [ffff8800000f7050] 000f7050
[ 0.000000] [ffffe20000000000-ffffe200033fffff] PMD -> [ffff880001200000-ffff8800045fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cff00
[ 0.000000] On node 0 totalpages: 851614
[ 0.000000] DMA zone: 1846 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 834372 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec88000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xfec88000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ca000
[ 0.000000] PM: Registered nosave memory: 00000000000ca000 - 00000000000cc000
[ 0.000000] PM: Registered nosave memory: 00000000000cc000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
[ 0.000000] dyn_array irq_2_pin_head+0x0/0x418 size:0x10 nr:256 align:0x1000
[ 0.000000] dyn_array irq_cfgx+0x0/0x8 size:0x30 nr:32 align:0x1000
[ 0.000000] dyn_array sparse_irqs+0x0/0x8 size:0x100 nr:32 align:0x1000
[ 0.000000] dyn_array total_size: 0x4000
[ 0.000000] dyn_array irq_2_pin_head+0x0/0x418 ==> [0x101c000 - 0x101d000]
[ 0.000000] dyn_array irq_cfgx+0x0/0x8 ==> [0x101d000 - 0x101d600]
[ 0.000000] dyn_array sparse_irqs+0x0/0x8 ==> [0x101e000 - 0x1020000]
[ 0.000000] kstat_irqs ==> [0x1020000 - 0x1020400]
[ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data
[ 0.000000] per cpu data for cpu0 on node0 at 0000000001021000
[ 0.000000] per cpu data for cpu1 on node0 at 000000000102d000
[ 0.000000] per cpu data for cpu2 on node0 at 0000000001039000
[ 0.000000] per cpu data for cpu3 on node0 at 0000000001045000
[ 0.000000] per cpu data for cpu4 on node0 at 0000000001051000
[ 0.000000] per cpu data for cpu5 on node0 at 000000000105d000
[ 0.000000] per cpu data for cpu6 on node0 at 0000000001069000
[ 0.000000] per cpu data for cpu7 on node0 at 0000000001075000
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 8, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 836218
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0 console=ttyS0,115200n8
[ 0.000000] Initializing CPU#0
[ 0.000000] found new irq_desc for irq 0
[ 0.000000] found new irq_desc for irq 1
[ 0.000000] found new irq_desc for irq 2
[ 0.000000] found new irq_desc for irq 3
[ 0.000000] found new irq_desc for irq 4
[ 0.000000] found new irq_desc for irq 5
[ 0.000000] found new irq_desc for irq 6
[ 0.000000] found new irq_desc for irq 7
[ 0.000000] found new irq_desc for irq 8
[ 0.000000] found new irq_desc for irq 9
[ 0.000000] found new irq_desc for irq 10
[ 0.000000] found new irq_desc for irq 11
[ 0.000000] found new irq_desc for irq 12
[ 0.000000] found new irq_desc for irq 13
[ 0.000000] found new irq_desc for irq 14
[ 0.000000] found new irq_desc for irq 15
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000000] Detected 3191.983 MHz processor.
[ 0.003333] Console: colour VGA+ 80x25
[ 0.003333] console [tty0] enabled
[ 0.003333] console [ttyS0] enabled
[ 0.003333] Checking aperture...
[ 0.003333] No AGP bridge found
[ 0.003333] Memory: 3342444k/3406848k available (3830k kernel code, 64012k reserved, 2175k data, 672k init)
[ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.003333] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.006666] Calibrating delay loop (skipped), value calculated using timer frequency.. 6386.96 BogoMIPS (lpj=10639943)
[ 0.013081] Security Framework initialized
[ 0.016665] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.021461] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.026664] Mount-cache hash table entries: 256
[ 0.029998] Initializing cgroup subsys ns
[ 0.033331] Initializing cgroup subsys cpuacct
[ 0.036664] Initializing cgroup subsys memory
[ 0.039997] Initializing cgroup subsys devices
[ 0.043330] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.048291] CPU: L2 cache: 6144K
[ 0.051710] CPU 0/0 -> Node 0
[ 0.054865] CPU: Physical Processor ID: 0
[ 0.059063] CPU: Processor Core ID: 0
[ 0.063329] CPU0: Thermal monitoring enabled (TM2)
[ 0.066662] using mwait in idle threads.
[ 0.069995] ACPI: Core revision 20080609
[ 0.082425] Setting APIC routing to flat
[ 0.086661] 0 add_pin_to_irq: irq 1 --> apic 0 pin 1
[ 0.086661] 0 add_pin_to_irq: irq 0 --> apic 0 pin 2
[ 0.086661] 0 add_pin_to_irq: irq 3 --> apic 0 pin 3
[ 0.086661] 0 add_pin_to_irq: irq 4 --> apic 0 pin 4
[ 0.086661] 0 add_pin_to_irq: irq 5 --> apic 0 pin 5
[ 0.086661] 0 add_pin_to_irq: irq 6 --> apic 0 pin 6
[ 0.086661] 0 add_pin_to_irq: irq 7 --> apic 0 pin 7
[ 0.086661] 0 add_pin_to_irq: irq 8 --> apic 0 pin 8
[ 0.086661] 0 add_pin_to_irq: irq 9 --> apic 0 pin 9
[ 0.086661] 0 add_pin_to_irq: irq 10 --> apic 0 pin 10
[ 0.086661] 0 add_pin_to_irq: irq 11 --> apic 0 pin 11
[ 0.086661] 0 add_pin_to_irq: irq 12 --> apic 0 pin 12
[ 0.086661] 0 add_pin_to_irq: irq 13 --> apic 0 pin 13
[ 0.086661] 0 add_pin_to_irq: irq 14 --> apic 0 pin 14
[ 0.086661] 0 add_pin_to_irq: irq 15 --> apic 0 pin 15
[ 0.086661] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.122915] CPU0: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
[ 0.133324] APIC timer calibration result 24937431
[ 0.133324] Detected 24.937 MHz APIC timer.
[ 0.136657] Booting processor 1/4 ip 6000
[ 0.149990] Initializing CPU#1
[ 0.149990] Calibrating delay using timer specific routine.. 6386.03 BogoMIPS (lpj=10640061)
[ 0.149990] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.149990] CPU: L2 cache: 6144K
[ 0.149990] CPU 1/4 -> Node 0
[ 0.149990] CPU: Physical Processor ID: 1
[ 0.149990] CPU: Processor Core ID: 0
[ 0.149990] CPU1: Thermal monitoring enabled (TM2)
[ 0.149990] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.233318] CPU1: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
[ 0.243317] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.246650] Booting processor 2/1 ip 6000
[ 0.259983] Initializing CPU#2
[ 0.259983] Calibrating delay using timer specific routine.. 6386.02 BogoMIPS (lpj=10640043)
[ 0.259983] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.259983] CPU: L2 cache: 6144K
[ 0.259983] CPU 2/1 -> Node 0
[ 0.259983] CPU: Physical Processor ID: 0
[ 0.259983] CPU: Processor Core ID: 1
[ 0.259983] CPU2: Thermal monitoring enabled (TM2)
[ 0.259983] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.343097] CPU2: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
[ 0.349977] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.353310] Booting processor 3/5 ip 6000
[ 0.366642] Initializing CPU#3
[ 0.366642] Calibrating delay using timer specific routine.. 6453.47 BogoMIPS (lpj=10751153)
[ 0.366642] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.366642] CPU: L2 cache: 6144K
[ 0.366642] CPU 3/5 -> Node 0
[ 0.366642] CPU: Physical Processor ID: 1
[ 0.366642] CPU: Processor Core ID: 1
[ 0.366642] CPU3: Thermal monitoring enabled (TM2)
[ 0.366642] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.449970] CPU3: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
[ 0.456636] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.459970] Booting processor 4/2 ip 6000
[ 0.473302] Initializing CPU#4
[ 0.473302] Calibrating delay using timer specific routine.. 6386.99 BogoMIPS (lpj=10639998)
[ 0.473302] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.473302] CPU: L2 cache: 6144K
[ 0.473302] CPU 4/2 -> Node 0
[ 0.473302] CPU: Physical Processor ID: 0
[ 0.473302] CPU: Processor Core ID: 2
[ 0.473302] CPU4: Thermal monitoring enabled (TM2)
[ 0.473302] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106
[ 0.556633] CPU4: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
[ 0.563300] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[ 0.566633] Booting processor 5/6 ip 6000
[ 0.579962] Initializing CPU#5
[ 0.579962] Calibrating delay using timer specific routine.. 6386.01 BogoMIPS (lpj=10640030)
[ 0.579962] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.579962] CPU: L2 cache: 6144K
[ 0.579962] CPU 5/6 -> Node 0
[ 0.579962] CPU: Physical Processor ID: 1
[ 0.579962] CPU: Processor Core ID: 2
[ 0.579962] CPU5: Thermal monitoring enabled (TM2)
[ 0.579962] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106
[ 0.663300] CPU5: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
[ 0.669967] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[ 0.673300] Booting processor 6/3 ip 6000
[ 0.686621] Initializing CPU#6
[ 0.686621] Calibrating delay using timer specific routine.. 6386.99 BogoMIPS (lpj=10639999)
[ 0.686621] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.686621] CPU: L2 cache: 6144K
[ 0.686621] CPU 6/3 -> Node 0
[ 0.686621] CPU: Physical Processor ID: 0
[ 0.686621] CPU: Processor Core ID: 3
[ 0.686621] CPU6: Thermal monitoring enabled (TM2)
[ 0.686621] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106
[ 0.769967] CPU6: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
[ 0.776633] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[ 0.779967] Booting processor 7/7 ip 6000
[ 0.793281] Initializing CPU#7
[ 0.793281] Calibrating delay using timer specific routine.. 6386.01 BogoMIPS (lpj=10640024)
[ 0.793281] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.793281] CPU: L2 cache: 6144K
[ 0.793281] CPU 7/7 -> Node 0
[ 0.793281] CPU: Physical Processor ID: 1
[ 0.793281] CPU: Processor Core ID: 3
[ 0.793281] CPU7: Thermal monitoring enabled (TM2)
[ 0.793281] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106
[ 0.876633] CPU7: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
[ 0.883300] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[ 0.886633] Brought up 8 CPUs
[ 0.889792] Total of 8 processors activated (51159.53 BogoMIPS).
[ 0.893300] net_namespace: 864 bytes
[ 0.896633] xor: automatically using best checksumming function: generic_sse
[ 0.915667] generic_sse: 11872.800 MB/sec
[ 0.919967] xor: using function: generic_sse (11872.800 MB/sec)
[ 0.923300] NET: Registered protocol family 16
[ 0.926633] No dock devices found.
[ 0.929967] ACPI: bus type pci registered
[ 0.933300] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 8
[ 0.936633] PCI: MCFG area at e0000000 reserved in E820
[ 0.939967] PCI: Using MMCONFIG at e0000000 - e08fffff
[ 0.943300] PCI: Using configuration type 1 for base access
[ 0.949967] ACPI: EC: Look up EC in DSDT
[ 0.953300] ACPI: Interpreter enabled
[ 0.956633] ACPI: (supports S0 S3 S4 S5)
[ 0.959967] ACPI: Using IOAPIC for interrupt routing
[ 0.966633] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.969967] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.973300] pci 0000:00:00.0: PME# disabled
[ 0.976633] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.979967] pci 0000:00:01.0: PME# disabled
[ 0.983300] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.986633] pci 0000:00:05.0: PME# disabled
[ 0.989967] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.993300] pci 0000:00:09.0: PME# disabled
[ 0.996633] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.999967] pci 0000:00:1b.0: PME# disabled
[ 1.003300] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.006633] pci 0000:00:1c.0: PME# disabled
[ 1.009967] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.013300] pci 0000:00:1d.7: PME# disabled
[ 1.016633] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 1.016633] pci 0000:01:00.0: supports D1
[ 1.016633] PCI: bridge 0000:00:01.0 32bit mmio: [dc100000, dc1fffff]
[ 1.019967] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 1.023300] pci 0000:03:00.0: PME# disabled
[ 1.026633] pci 0000:03:00.3: PME# supported from D0 D3hot D3cold
[ 1.029967] pci 0000:03:00.3: PME# disabled
[ 1.033300] PCI: bridge 0000:00:09.0 io port: [2000, 2fff]
[ 1.036633] PCI: bridge 0000:00:09.0 32bit mmio: [dc200000, dc3fffff]
[ 1.039967] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 1.043300] pci 0000:04:00.0: PME# disabled
[ 1.046633] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold
[ 1.049967] pci 0000:04:02.0: PME# disabled
[ 1.053300] PCI: bridge 0000:03:00.0 io port: [2000, 2fff]
[ 1.056633] PCI: bridge 0000:03:00.0 32bit mmio: [dc200000, dc2fffff]
[ 1.059967] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 1.063300] pci 0000:06:00.0: PME# disabled
[ 1.066633] pci 0000:06:00.1: PME# supported from D0 D3hot D3cold
[ 1.069967] pci 0000:06:00.1: PME# disabled
[ 1.073300] PCI: bridge 0000:04:02.0 io port: [2000, 2fff]
[ 1.076633] PCI: bridge 0000:04:02.0 32bit mmio: [dc200000, dc2fffff]
[ 1.079967] pci 0000:09:05.0: supports D1
[ 1.079967] pci 0000:09:05.0: supports D2
[ 1.079967] pci 0000:09:06.0: supports D2
[ 1.079967] pci 0000:09:06.0: PME# supported from D2 D3hot D3cold
[ 1.083300] pci 0000:09:06.0: PME# disabled
[ 1.086633] pci 0000:00:1e.0: transparent bridge
[ 1.089967] PCI: bridge 0000:00:1e.0 io port: [3000, 3fff]
[ 1.093300] PCI: bridge 0000:00:1e.0 32bit mmio: [dc000000, dc0fffff]
[ 1.096633] PCI: bridge 0000:00:1e.0 64bit mmio pref: [d8000000, dbffffff]
[ 1.099967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.099967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.099967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 1.099967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 1.099967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0._PRT]
[ 1.100861] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0.BPD0._PRT]
[ 1.101087] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0.BPD2._PRT]
[ 1.101394] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMF3._PRT]
[ 1.101828] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 1.102351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 1.109967] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 1.116426] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 1.123087] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 1.129762] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 1.136417] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 1.143082] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 *11 14 15)
[ 1.149515] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 14 15)
[ 1.153300] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *9
[ 1.159967] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 1.163300] pnp: PnP ACPI init
[ 1.166609] ACPI: bus type pnp registered
[ 1.173300] pnp: PnP ACPI: found 11 devices
[ 1.176633] ACPI: ACPI bus type pnp unregistered
[ 1.179967] SCSI subsystem initialized
[ 1.183300] libata version 3.00 loaded.
[ 1.183300] usbcore: registered new interface driver usbfs
[ 1.186633] usbcore: registered new interface driver hub
[ 1.189967] usbcore: registered new device driver usb
[ 1.193300] PCI: Using ACPI for IRQ routing
[ 1.212875] PCI-GART: No AMD northbridge found.
[ 1.216633] hpet clockevent registered
[ 1.216633] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.221231] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 1.227657] ACPI: RTC can wake from S4
[ 1.240451] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 1.245465] system 00:01: ioport range 0x800-0x80f has been reserved
[ 1.252012] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 1.258660] system 00:01: ioport range 0x1180-0x11bf has been reserved
[ 1.265389] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[ 1.272112] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 1.279932] system 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved
[ 1.287758] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 1.295583] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.302914] system 00:01: iomem range 0xfec88000-0xfec88fff has been reserved
[ 1.310247] system 00:01: iomem range 0xfe000000-0xfe01ffff has been reserved
[ 1.317577] system 00:01: iomem range 0xfe600000-0xfe6fffff has been reserved
[ 1.330161] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.332154] pci 0000:00:01.0: IO window: disabled
[ 1.337231] pci 0000:00:01.0: MEM window: 0xdc100000-0xdc1fffff
[ 1.343525] pci 0000:00:01.0: PREFETCH window: 0x000000d1000000-0x000000d10fffff
[ 1.351436] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02
[ 1.357553] pci 0000:00:05.0: IO window: disabled
[ 1.362623] pci 0000:00:05.0: MEM window: disabled
[ 1.371932] pci 0000:00:05.0: PREFETCH window: disabled
[ 1.377532] pci 0000:04:00.0: PCI bridge, secondary bus 0000:05
[ 1.383650] pci 0000:04:00.0: IO window: disabled
[ 1.388737] pci 0000:04:00.0: MEM window: disabled
[ 1.393900] pci 0000:04:00.0: PREFETCH window: disabled
[ 1.399496] pci 0000:04:02.0: PCI bridge, secondary bus 0000:06
[ 1.405614] pci 0000:04:02.0: IO window: 0x2000-0x2fff
[ 1.411124] pci 0000:04:02.0: MEM window: 0xdc200000-0xdc2fffff
[ 1.417417] pci 0000:04:02.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff
[ 1.425343] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
[ 1.431455] pci 0000:03:00.0: IO window: 0x2000-0x2fff
[ 1.436972] pci 0000:03:00.0: MEM window: 0xdc200000-0xdc2fffff
[ 1.443261] pci 0000:03:00.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff
[ 1.451646] pci 0000:03:00.3: PCI bridge, secondary bus 0000:07
[ 1.457758] pci 0000:03:00.3: IO window: disabled
[ 1.462837] pci 0000:03:00.3: MEM window: disabled
[ 1.468002] pci 0000:03:00.3: PREFETCH window: disabled
[ 1.473602] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03
[ 1.479718] pci 0000:00:09.0: IO window: 0x2000-0x2fff
[ 1.485228] pci 0000:00:09.0: MEM window: 0xdc200000-0xdc3fffff
[ 1.491534] pci 0000:00:09.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff
[ 1.499450] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
[ 1.505566] pci 0000:00:1c.0: IO window: disabled
[ 1.510643] pci 0000:00:1c.0: MEM window: disabled
[ 1.515808] pci 0000:00:1c.0: PREFETCH window: disabled
[ 1.521406] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
[ 1.527518] pci 0000:00:1e.0: IO window: 0x3000-0x3fff
[ 1.533029] pci 0000:00:1e.0: MEM window: 0xdc000000-0xdc0fffff
[ 1.539325] pci 0000:00:1e.0: PREFETCH window: 0x000000d8000000-0x000000dbffffff
[ 1.547245] found new irq_cfg for irq 16
[ 1.547254] 0 add_pin_to_irq: irq 16 --> apic 0 pin 16
[ 1.547267] found new irq_desc for irq 16
[ 1.547282] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.554155] pci 0000:00:01.0: setting latency timer to 64
[ 1.554162] pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.561061] pci 0000:00:05.0: setting latency timer to 64
[ 1.561066] pci 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.567959] pci 0000:00:09.0: setting latency timer to 64
[ 1.567965] vendor=8086 device=4029
[ 1.571652] pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.578548] pci 0000:03:00.0: setting latency timer to 64
[ 1.578556] vendor=8086 device=3500
[ 1.582236] vendor=8086 device=4029
[ 1.585919] pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.592811] pci 0000:04:00.0: setting latency timer to 64
[ 1.592818] vendor=8086 device=3500
[ 1.596501] vendor=8086 device=4029
[ 1.600182] found new irq_cfg for irq 18
[ 1.600183] 0 add_pin_to_irq: irq 18 --> apic 0 pin 18
[ 1.600188] found new irq_desc for irq 18
[ 1.600194] pci 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.607088] pci 0000:04:02.0: setting latency timer to 64
[ 1.607096] pci 0000:03:00.3: setting latency timer to 64
[ 1.607109] found new irq_cfg for irq 21
[ 1.607123] 0 add_pin_to_irq: irq 21 --> apic 0 pin 21
[ 1.607138] found new irq_desc for irq 21
[ 1.607155] pci 0000:00:1c.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.613997] pci 0000:00:1c.0: setting latency timer to 64
[ 1.614003] pci 0000:00:1e.0: setting latency timer to 64
[ 1.614012] bus: 00 index 0 io port: [0, ffff]
[ 1.618660] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[ 1.624071] bus: 01 index 0 mmio: [0, 0]
[ 1.628193] bus: 01 index 1 mmio: [dc100000, dc1fffff]
[ 1.633529] bus: 01 index 2 mmio: [d1000000, d10fffff]
[ 1.638865] bus: 01 index 3 mmio: [0, 0]
[ 1.642980] bus: 02 index 0 mmio: [0, 0]
[ 1.647099] bus: 02 index 1 mmio: [0, 0]
[ 1.651210] bus: 02 index 2 mmio: [0, 0]
[ 1.655340] bus: 02 index 3 mmio: [0, 0]
[ 1.659457] bus: 03 index 0 io port: [2000, 2fff]
[ 1.664351] bus: 03 index 1 mmio: [dc200000, dc3fffff]
[ 1.669686] bus: 03 index 2 mmio: [d1100000, d11fffff]
[ 1.675035] bus: 03 index 3 mmio: [0, 0]
[ 1.679152] bus: 04 index 0 io port: [2000, 2fff]
[ 1.684055] bus: 04 index 1 mmio: [dc200000, dc2fffff]
[ 1.689392] bus: 04 index 2 mmio: [d1100000, d11fffff]
[ 1.694721] bus: 04 index 3 mmio: [0, 0]
[ 1.698837] bus: 05 index 0 mmio: [0, 0]
[ 1.702954] bus: 05 index 1 mmio: [0, 0]
[ 1.707501] bus: 05 index 2 mmio: [0, 0]
[ 1.711630] bus: 05 index 3 mmio: [0, 0]
[ 1.715746] bus: 06 index 0 io port: [2000, 2fff]
[ 1.720644] bus: 06 index 1 mmio: [dc200000, dc2fffff]
[ 1.725975] bus: 06 index 2 mmio: [d1100000, d11fffff]
[ 1.731306] bus: 06 index 3 mmio: [0, 0]
[ 1.735435] bus: 07 index 0 mmio: [0, 0]
[ 1.739553] bus: 07 index 1 mmio: [0, 0]
[ 1.743672] bus: 07 index 2 mmio: [0, 0]
[ 1.747788] bus: 07 index 3 mmio: [0, 0]
[ 1.751902] bus: 08 index 0 mmio: [0, 0]
[ 1.756020] bus: 08 index 1 mmio: [0, 0]
[ 1.760137] bus: 08 index 2 mmio: [0, 0]
[ 1.764252] bus: 08 index 3 mmio: [0, 0]
[ 1.768379] bus: 09 index 0 io port: [3000, 3fff]
[ 1.773278] bus: 09 index 1 mmio: [dc000000, dc0fffff]
[ 1.778614] bus: 09 index 2 mmio: [d8000000, dbffffff]
[ 1.783947] bus: 09 index 3 io port: [0, ffff]
[ 1.788581] bus: 09 index 4 mmio: [0, ffffffffffffffff]
[ 1.794014] NET: Registered protocol family 2
[ 1.832044] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.837428] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.848795] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.855117] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.861926] TCP reno registered
[ 1.875410] NET: Registered protocol family 1
[ 1.878880] checking if image is initramfs... it is
[ 1.932129] Freeing initrd memory: 1917k freed
[ 1.935787] pci 0000:09:05.0: Boot video device
[ 1.939163] input: Power Button (FF) as /class/input/input0
[ 1.942159] ACPI: Power Button (FF) [PWRF]
[ 1.949470] input: Power Button (CM) as /class/input/input1
[ 1.952768] ACPI: Power Button (CM) [PWRB]
[ 1.960068] found new irq_cfg for irq 20
[ 1.960068] 0 add_pin_to_irq: irq 20 --> apic 0 pin 20
[ 1.960068] found new irq_desc for irq 20
[ 1.960068] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.957967] Switched to high resolution mode on CPU 2
[ 1.958119] Switched to high resolution mode on CPU 5
[ 1.960075] Switched to high resolution mode on CPU 3
[ 1.960073] Switched to high resolution mode on CPU 6
[ 1.958611] Switched to high resolution mode on CPU 4
[ 1.958615] Switched to high resolution mode on CPU 7
[ 1.959458] Switched to high resolution mode on CPU 1
[ 1.963822] Switched to high resolution mode on CPU 0
[ 1.963832] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.963845] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.221976] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.221976] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.221976] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.221976] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdc608000
[ 2.221976] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.221976] usb usb1: configuration #1 chosen from 1 choice
[ 2.221976] hub 1-0:1.0: USB hub found
[ 2.221976] hub 1-0:1.0: 8 ports detected
[ 2.221977] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.221977] USB Universal Host Controller Interface driver v3.0
[ 2.221977] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.221977] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.221977] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.221977] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.221977] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800
[ 2.221977] usb usb2: configuration #1 chosen from 1 choice
[ 2.221977] hub 2-0:1.0: USB hub found
[ 2.221977] hub 2-0:1.0: 2 ports detected
[ 2.283328] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.286675] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.286682] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.291388] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.299653] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820
[ 2.304781] usb usb3: configuration #1 chosen from 1 choice
[ 2.311396] hub 3-0:1.0: USB hub found
[ 2.315409] hub 3-0:1.0: 2 ports detected
[ 2.424783] found new irq_cfg for irq 22
[ 2.424783] 0 add_pin_to_irq: irq 22 --> apic 0 pin 22
[ 2.424783] found new irq_desc for irq 22
[ 2.424783] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 2.430006] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.430012] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.434719] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.443011] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840
[ 2.448122] usb usb4: configuration #1 chosen from 1 choice
[ 2.454726] hub 4-0:1.0: USB hub found
[ 2.458737] hub 4-0:1.0: 2 ports detected
[ 2.568116] found new irq_cfg for irq 23
[ 2.568116] 0 add_pin_to_irq: irq 23 --> apic 0 pin 23
[ 2.568116] found new irq_desc for irq 23
[ 2.568116] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 2.573340] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.573347] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.578044] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.586329] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860
[ 2.591448] usb usb5: configuration #1 chosen from 1 choice
[ 2.598085] hub 5-0:1.0: USB hub found
[ 2.602111] hub 5-0:1.0: 2 ports detected
[ 2.711450] Simple Boot Flag at 0x40 set to 0x80
[ 2.718126] audit: initializing netlink socket (disabled)
[ 2.723993] type=2000 audit(1219363544.720:1): initialized
[ 2.734797] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.744797] VFS: Disk quotas dquot_6.5.1
[ 2.748463] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.755197] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 2.762850] msgmni has been set to 6531
[ 2.767165] async_tx: api initialized (async)
[ 2.771716] io scheduler noop registered
[ 2.775187] io scheduler anticipatory registered
[ 2.779310] io scheduler deadline registered
[ 2.785250] io scheduler cfq registered (default)
[ 2.789827] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 2.789988] pcieport-driver 0000:00:01.0: found MSI capability
[ 2.796171] found new irq_cfg for irq 33024
[ 2.796188] found new irq_desc for irq 33024
[ 2.796212] pci_express 0000:00:01.0:pcie00: allocate port service
[ 2.796466] pci_express 0000:00:01.0:pcie01: allocate port service
[ 2.796466] pcieport-driver 0000:00:05.0: setting latency timer to 64
[ 2.796466] pcieport-driver 0000:00:05.0: found MSI capability
[ 2.802674] found new irq_cfg for irq 164096
[ 2.802674] found new irq_desc for irq 164096
[ 2.802674] pci_express 0000:00:05.0:pcie00: allocate port service
[ 2.802674] pci_express 0000:00:05.0:pcie01: allocate port service
[ 2.802674] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 2.802674] pcieport-driver 0000:00:09.0: found MSI capability
[ 2.808872] found new irq_cfg for irq 295168
[ 2.808878] found new irq_desc for irq 295168
[ 2.808878] pci_express 0000:00:09.0:pcie00: allocate port service
[ 2.808878] pci_express 0000:00:09.0:pcie01: allocate port service
[ 2.808878] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 2.808878] pcieport-driver 0000:00:1c.0: found MSI capability
[ 2.815092] found new irq_cfg for irq 917760
[ 2.815092] found new irq_desc for irq 917760
[ 2.815092] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 2.815092] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 2.815092] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 2.815092] pcieport-driver 0000:03:00.0: setting latency timer to 64
[ 2.815092] pci_express 0000:03:00.0:pcie11: allocate port service
[ 2.815092] pcieport-driver 0000:04:00.0: setting latency timer to 64
[ 2.815092] pcieport-driver 0000:04:00.0: found MSI capability
[ 2.821470] found new irq_cfg for irq 4194560
[ 2.821470] found new irq_desc for irq 4194560
[ 2.821470] pci_express 0000:04:00.0:pcie21: allocate port service
[ 2.821470] pcieport-driver 0000:04:02.0: setting latency timer to 64
[ 2.821470] pcieport-driver 0000:04:02.0: found MSI capability
[ 2.824818] found new irq_cfg for irq 4260096
[ 2.824835] found new irq_desc for irq 4260096
[ 2.824863] pci_express 0000:04:02.0:pcie21: allocate port service
[ 2.827930] aer 0000:00:01.0:pcie01: AER service couldn't init device: no _OSC support
[ 2.827930] aer 0000:00:05.0:pcie01: AER service couldn't init device: no _OSC support
[ 2.827930] aer 0000:00:09.0:pcie01: AER service couldn't init device: no _OSC support
[ 2.827930] ACPI: SSDT CFF04DBE, 01DD (r1 PmRef Cpu0Ist 3000 INTL 20050228)
[ 2.839743] processor ACPI0007:00: registered as cooling_device0
[ 2.843338] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.851067] ACPI: SSDT CFF04F9B, 016E (r1 PmRef Cpu1Ist 3000 INTL 20050228)
[ 2.863958] processor ACPI0007:01: registered as cooling_device1
[ 2.863961] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.870848] ACPI: SSDT CFF05109, 016E (r1 PmRef Cpu2Ist 3000 INTL 20050228)
[ 2.882423] processor ACPI0007:02: registered as cooling_device2
[ 2.884887] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 2.894156] ACPI: SSDT CFF05277, 016E (r1 PmRef Cpu3Ist 3000 INTL 20050228)
[ 2.903959] processor ACPI0007:03: registered as cooling_device3
[ 2.907296] ACPI: Processor [CPU3] (supports 8 throttling states)
[ 2.914783] ACPI: SSDT CFF053E5, 016E (r1 PmRef CPU4Ist 3000 INTL 20050228)
[ 2.928625] processor ACPI0007:04: registered as cooling_device4
[ 2.932042] ACPI: Processor [CPU4] (supports 8 throttling states)
[ 2.940460] ACPI: SSDT CFF05553, 016E (r1 PmRef CPU5Ist 3000 INTL 20050228)
[ 2.953958] processor ACPI0007:05: registered as cooling_device5
[ 2.953963] ACPI: Processor [CPU5] (supports 8 throttling states)
[ 2.961174] ACPI: SSDT CFF056C1, 016E (r1 PmRef Cpu6Ist 3000 INTL 20050228)
[ 2.973963] processor ACPI0007:06: registered as cooling_device6
[ 2.975295] ACPI: Processor [CPU6] (supports 8 throttling states)
[ 2.983217] ACPI: SSDT CFF0582F, 016E (r1 PmRef Cpu7Ist 3000 INTL 20050228)
[ 2.994791] processor ACPI0007:07: registered as cooling_device7
[ 2.996869] ACPI: Processor [CPU7] (supports 8 throttling states)
[ 3.068127] Non-volatile memory driver v1.2
[ 3.071952] intel_rng: FWH not detected
[ 3.075411] Linux agpgart interface v0.103
[ 3.081251] Serial: 8250/16550 driver4 ports, IRQ sharing disabled
[ 3.087917] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.094583] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 3.101250] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.105852] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 3.128126] FDC 0 is a post-1991 82077
[ 3.134794] brd: module loaded
[ 3.139901] loop: module loaded
[ 3.142122] tun: Universal TUN/TAP device driver, 1.6
[ 3.147366] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 3.154791] console [netcon0] enabled
[ 3.158127] netconsole: network logging started
[ 3.162841] Uniform Multi-Platform E-IDE driver
[ 3.168245] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 3.178252] Probing IDE interface ide0...
[ 3.875104] hda: Optiarc DVD RW AD-7590A, ATAPI CD/DVD-ROM drive
[ 4.521230] Probing IDE interface ide1...
[ 5.053945] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.057472] ide1 at 0x170-0x177,0x376 on irq 15
[ 5.063300] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 974kB Cache
[ 5.072020] Uniform CD-ROM driver Revision: 3.20
[ 7.671081] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 7.680523] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 7.688269] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
[ 7.694910] Driver 'sd' needs updating - please use bus_type methods
[ 7.701566] Driver 'sr' needs updating - please use bus_type methods
[ 7.708162] ata_piix 0000:00:1f.1: version 2.12
[ 7.708162] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 7.714844] ata_piix 0000:00:1f.1: BAR 0: can't reserve I/O region [0x1f0-0x1f7]
[ 7.722590] ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 0 (errno=-16)
[ 7.730141] ata_piix 0000:00:1f.1: BAR 2: can't reserve I/O region [0x170-0x177]
[ 7.737861] ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 1 (errno=-16)
[ 7.746104] ata_piix 0000:00:1f.1: no available native port
[ 7.753958] Fusion MPT base driver 3.04.07
[ 7.757293] Copyright (c) 1999-2008 LSI Corporation
[ 7.761619] Fusion MPT SPI Host driver 3.04.07
[ 7.767994] Fusion MPT SAS Host driver 3.04.07
[ 7.772700] vendor=8086 device=244e
[ 7.776036] found new irq_cfg for irq 17
[ 7.776040] 0 add_pin_to_irq: irq 17 --> apic 0 pin 17
[ 7.776047] found new irq_desc for irq 17
[ 7.776056] ohci1394 0000:09:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.837304] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[dc040000-dc0407ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 7.854831] ieee1394: raw1394: /dev/raw1394 device initialized
[ 7.861257] usbcore: registered new interface driver usblp
[ 7.864371] Initializing USB Mass Storage driver...
[ 7.871561] usbcore: registered new interface driver usb-storage
[ 7.877802] USB Mass Storage support registered.
[ 7.883427] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 7.893355] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 7.896706] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 7.904589] mice: PS/2 mouse device common for all mice
[ 8.264580] md: linear personality registered for level -1
[ 8.265864] md: raid0 personality registered for level 0
[ 8.272529] md: raid1 personality registered for level 1
[ 8.278027] md: raid10 personality registered for level 10
[ 8.339999] raid6: int64x1 2954 MB/s
[ 8.399999] raid6: int64x2 3542 MB/s
[ 8.459999] raid6: int64x4 3432 MB/s
[ 8.519999] raid6: int64x8 2319 MB/s
[ 8.579999] raid6: sse2x1 3637 MB/s
[ 8.639999] raid6: sse2x2 7362 MB/s
[ 8.700418] raid6: sse2x4 8743 MB/s
[ 8.703333] raid6: using algorithm sse2x4 (8743 MB/s)
[ 8.707697] md: raid6 personality registered for level 6
[ 8.716276] md: raid5 personality registered for level 5
[ 8.721774] md: raid4 personality registered for level 4
[ 8.723967] md: multipath personality registered for level -4
[ 8.732811] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 8.741824] cpuidle: using governor ladder
[ 8.744461] cpuidle: using governor menu
[ 8.748811] usbcore: registered new interface driver usbhid
[ 8.754641] usbhid: v2.6:USB HID core driver
[ 8.759372] oprofile: using NMI interrupt.
[ 8.763967] TCP cubic registered
[ 8.767922] NET: Registered protocol family 10
[ 8.771676] IPv6 over IPv4 tunneling driver
[ 8.777922] NET: Registered protocol family 17
[ 8.782537] RPC: Registered udp transport module.
[ 8.787891] RPC: Registered tcp transport module.
[ 8.794588] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 8.801365] Freeing unused kernel memory: 672k freed
[ 8.804896] Write protecting the kernel read-only data: 5576k
[ 9.035910] vendor=8086 device=4021
[ 9.035910] arcmsr 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.035910] arcmsr 0000:01:00.0: setting latency timer to 64
[ 9.047290] ARECA RAID ADAPTER0: FIRMWARE VERSION V1.44 2008-1-31
[ 9.059982] scsi0 : Areca SATA Host Adapter RAID Controller( RAID6 capable)
[ 9.059989] Driver Version 1.20.00.15 2008/02/27
[ 9.060416] scsi 0:0:0:0: Direct-Access Areca ARC-1280-VOL#00 R001 PQ: 0 ANSI: 5
[ 9.060207] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[ 9.061041] sd 0:0:0:0: [sda] 42968747008 512-byte hardware sectors (21999998 MB)
[ 9.061457] sd 0:0:0:0: [sda] Write Protect is off
[ 9.061457] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08
[ 9.060000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.061457] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[ 9.061457] sd 0:0:0:0: [sda] 42968747008 512-byte hardware sectors (21999998 MB)
[ 9.060207] sd 0:0:0:0: [sda] Write Protect is off
[ 9.060207] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08
[ 9.061457] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.061457] sda:<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e08100002824f8]
[ 9.450808] sda1 sda2 sda3 sda4
[ 9.454374] sd 0:0:0:0: [sda] Attached SCSI disk
[ 9.456849] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 9.456849] scsi 0:0:16:0: Processor Areca RAID controller R001 PQ: 0 ANSI: 0
[ 9.456849] scsi 0:0:16:0: Attached scsi generic sg1 type 3
[ 9.521250] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 9.532143] 3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
[ 9.548653] Adaptec aacraid driver 1.1-5[2456]-ms
[ 9.653333] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 9.656275] SGI XFS Quota Management subsystem
[ 9.669306] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
[ 9.669306] Copyright (c) 1999-2006 Intel Corporation.
[ 13.883324] kjournald starting. Commit interval 5 seconds
[ 13.883324] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.158124] found new irq_cfg for irq 19
[ 22.158124] 0 add_pin_to_irq: irq 19 --> apic 0 pin 19
[ 22.158124] found new irq_desc for irq 19
[ 22.158124] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 22.163542] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 22.163542] iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x1060)
[ 22.163542] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 22.171457] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
[ 22.171457] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 22.171457] vendor=8086 device=3518
[ 22.171457] vendor=8086 device=3500
[ 22.171457] vendor=8086 device=4029
[ 22.171457] e1000e 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 22.171457] e1000e 0000:06:00.0: setting latency timer to 64
[ 22.247915] 0000:06:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:e0:81:b0:84:14
[ 22.247915] 0000:06:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 22.247915] 0000:06:00.0: eth0: MAC: 3, PHY: 5, PBA No: ffffff-0ff
[ 22.247915] vendor=8086 device=3518
[ 22.247915] vendor=8086 device=3500
[ 22.247915] vendor=8086 device=4029
[ 22.247915] e1000e 0000:06:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 22.247915] e1000e 0000:06:00.1: setting latency timer to 64
[ 22.321248] 0000:06:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:e0:81:b0:84:15
[ 22.321248] 0000:06:00.1: eth1: Intel(R) PRO/1000 Network Connection
[ 22.321248] 0000:06:00.1: eth1: MAC: 3, PHY: 5, PBA No: ffffff-0ff
[ 23.093333] EXT3 FS on sda3, internal journal
[ 23.244790] SMsC 37B787 watchdog component driver 1.1 initialising...
[ 23.244790] smsc37b787_wdt: Unable to register miscdev on minor 130
[ 23.634789] XFS mounting filesystem sda4
[ 23.763214] Ending clean XFS mount for filesystem: sda4
[ 23.846924] Adding 31999992k swap on /dev/sda2. Priority:-1 extents:1 across:31999992k
[ 27.620000] found new irq_cfg for irq 6291712
[ 27.620000] found new irq_desc for irq 6291712
[ 27.673651] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.790417] 0000:06:00.0: eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 30.793544] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 40.923341] eth0: no IPv6 routers present
[ 62.888260] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 62.894694] NFSD: starting 90-second grace period
next prev parent reply other threads:[~2008-08-22 0:11 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <bug-11388-27@http.bugzilla.kernel.org/>
2008-08-21 1:04 ` [Bug 11388] New: 2.6.27-rc3 warns about MTRR range; only 3 of 16gb of memory is usable Andrew Morton
2008-08-21 1:20 ` Yinghai Lu
2008-08-21 1:49 ` Yinghai Lu
2008-08-21 11:44 ` Ingo Molnar
2008-08-21 11:56 ` Ingo Molnar
2008-08-21 15:39 ` Yinghai Lu
2008-08-22 3:51 ` Ingo Molnar
2008-08-22 4:45 ` Yinghai Lu
2008-08-21 20:55 ` Joshua Hoblitt
2008-08-21 21:51 ` Yinghai Lu
2008-08-21 23:33 ` Joshua Hoblitt
2008-08-22 0:10 ` Joshua Hoblitt [this message]
2008-08-22 0:28 ` Yinghai Lu
2008-08-22 0:29 ` Joshua Hoblitt
2008-08-22 1:00 ` Joshua Hoblitt
2008-08-22 1:10 ` Joshua Hoblitt
2008-08-22 1:55 ` Yinghai Lu
2008-08-22 2:15 ` Joshua Hoblitt
2008-08-22 2:26 ` Yinghai Lu
2008-08-22 3:24 ` Yinghai Lu
2008-08-22 3:50 ` Ingo Molnar
2008-08-22 3:56 ` Ingo Molnar
2008-08-22 4:48 ` Yinghai Lu
2008-08-23 0:22 ` Joshua Hoblitt
2008-08-23 5:52 ` Yinghai Lu
2008-08-23 10:43 ` Ingo Molnar
2008-08-26 8:35 ` Joshua Hoblitt
2008-08-26 8:42 ` Ingo Molnar
2008-08-25 21:43 ` Joshua Hoblitt
2008-08-22 6:16 ` Yinghai Lu
2008-08-22 6:24 ` Ingo Molnar
2008-08-23 23:53 ` Arjan van de Ven
2008-08-25 9:17 ` Ingo Molnar
2008-08-22 3:26 ` Joshua Hoblitt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080822001047.GF23377@hoblitt.com \
--to=josh@hoblitt.com \
--cc=akpm@linux-foundation.org \
--cc=bugme-daemon@bugzilla.kernel.org \
--cc=j_kernel@hoblitt.com \
--cc=linux-kernel@vger.kernel.org \
--cc=yhlu.kernel@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox