public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* [ETH] forcdeth: increase max_interrupt_work
@ 2008-08-27 14:21 Joe Korty
  2008-08-31  8:48 ` Tobias Diedrich
  0 siblings, 1 reply; 2+ messages in thread
From: Joe Korty @ 2008-08-27 14:21 UTC (permalink / raw)
  To: Ayaz Abdulla; +Cc: Jeff Garzik, Tobias Diedrich, Al Viro, Linux Kernel

Forcedeth: increase max_interrupt_work

This eliminates the following often-generated warning from
my 64 bit Opteron SMP test stand:

	eth0: too many iterations (6) in nv_nic_irq

According to the web, the problem is that the forcedeth
driver has a too-low value for max_interrupt_work.
Grepping the kernel I see that forcedeth has the second
lowest value of all ethernet drivers (ie, 6).  Most are
in the 20-40 range.  So this patch increases this a bit,
from 6 to 15 (at 15 forcedeth becomes the driver with
third-lowest max_interrupt_work value).

My test stand, which used to print out the above warnings
repetitively whenever it was under heavy net load, no
longer does so.

Signed-off-by: Joe Korty <joe.korty@ccur.com>

Index: 2.6.27-rc4-git4/drivers/net/forcedeth.c
===================================================================
--- 2.6.27-rc4-git4.orig/drivers/net/forcedeth.c	2008-08-27 09:49:13.000000000 -0400
+++ 2.6.27-rc4-git4/drivers/net/forcedeth.c	2008-08-27 10:02:40.000000000 -0400
@@ -818,7 +818,7 @@
  * Maximum number of loops until we assume that a bit in the irq mask
  * is stuck. Overridable with module param.
  */
-static int max_interrupt_work = 5;
+static int max_interrupt_work = 15;
 
 /*
  * Optimization can be either throuput mode or cpu mode

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2008-08-31 10:53 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-08-27 14:21 [ETH] forcdeth: increase max_interrupt_work Joe Korty
2008-08-31  8:48 ` Tobias Diedrich

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox