From: Jarod Wilson <jwilson@redhat.com>
To: Sebastian Siewior <lkml@ml.breakpoint.cc>, Janne Grunau <j@jannau.net>
Cc: linux-kernel@vger.kernel.org,
Christoph Bartelmus <lirc@bartelmus.de>,
Mario Limonciello <superm1@ubuntu.com>
Subject: Re: [PATCH 01/18] lirc core device driver infrastructure
Date: Tue, 9 Sep 2008 13:03:27 -0400 [thread overview]
Message-ID: <200809091303.27742.jwilson@redhat.com> (raw)
In-Reply-To: <20080909074018.GA26076@Chamillionaire.breakpoint.cc>
On Tuesday 09 September 2008 03:40:18 Sebastian Siewior wrote:
> >diff --git a/drivers/input/lirc/Makefile b/drivers/input/lirc/Makefile
> >new file mode 100644
> >index 0000000..cdb4c45
> >--- /dev/null
> >+++ b/drivers/input/lirc/Makefile
> >@@ -0,0 +1,8 @@
> >+# Makefile for the lirc drivers.
> >+#
> >+
> >+# Each configuration option enables a list of files.
> >+
> >+EXTRA_CFLAGS =-DIRCTL_DEV_MAJOR=61 -DLIRC_SERIAL_TRANSMITTER -I$(src)
>
> Do you rely on this specific major? Since your daemon opens /dev/lirc0
> you don't need a fixed major do you?
Good question. Quite honestly, I'm not sure. Christoph?
> LIRC_SERIAL_TRANSMITTER is used in patch 2 and just to enable a module
> options. Since it is always the case, please remove it.
> I haven't found the source of $src. It is probably a relic.
Janne took care of these. Heck, he's already replied, I'll just leave out the
parts he already replied to...
> >+++ b/drivers/input/lirc/lirc_dev.c
> >@@ -0,0 +1,809 @@
> >+/*
> >+ * LIRC base driver
> >+ *
> >+ * (L) by Artur Lipowski <alipowski@interia.pl>
>
> Is that L here on purpose?
Historical. I think it is supposed to signify that this was originally
licensed and written by Artur, but simply removing "(L) " is fine (here and in
lirc_dev.h).
> >+#include <linux/smp_lock.h>
>
> if you need this than you use the BKL back. As far as I remember
> the ioctl() handler in kernel core no longer takes the BKL and I don't
> see any locking in irctl_ioctl().
> >+/* helper function
> >+ * initializes the irctl structure
> >+ */
>
> For all comments above functions:
> - Please use the default comment style.
Apologies, I started on that, didn't finish, then forgot about it. Will do.
> - don't comment obvious things
> - please use kernel doc if
> - please comment the prototypes but the actual function.
Working on this too.
> >+ bytes_in_key = p->code_length/8 + (p->code_length%8 ? 1 : 0);
>
> did you actually pass checkpatch.pl ?
Yeah, but now that you point that out, I'm not sure how... :)
Taken care of by simply using BITS_TO_LONG() instead.
> >+EXPORT_SYMBOL(lirc_register_plugin);
>
> Is EXPORT_SYMBOL_GPL() possible?
Should be, I'm definitely not aware of any non-GPL users.
> >+EXPORT_SYMBOL(lirc_unregister_plugin);
Ditto.
> >+/* ----------------------------------------------------------------------
> > */
>
> I hate those
Me too. Gone.
--
Jarod Wilson
jarod@redhat.com
next prev parent reply other threads:[~2008-09-09 17:06 UTC|newest]
Thread overview: 94+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-09 4:05 [PATCH 0/18] linux infrared remote control drivers Jarod Wilson
2008-09-09 4:05 ` [PATCH 01/18] lirc core device driver infrastructure Jarod Wilson
2008-09-09 4:05 ` [PATCH 02/18] lirc serial port receiver/transmitter device driver Jarod Wilson
2008-09-09 4:05 ` [PATCH 03/18] lirc driver for 1st-gen Media Center Ed. USB IR transceivers Jarod Wilson
2008-09-09 4:05 ` [PATCH 04/18] lirc driver for 2nd-gen and later " Jarod Wilson
2008-09-09 4:05 ` [PATCH 05/18] lirc driver for i2c-based IR receivers Jarod Wilson
2008-09-09 4:05 ` [PATCH 06/18] lirc driver for the ATI USB RF remote receiver Jarod Wilson
2008-09-09 4:05 ` [PATCH 07/18] lirc driver for the CommandIR USB Transceiver Jarod Wilson
2008-09-09 4:05 ` [PATCH 08/18] lirc driver for the Soundgraph IMON IR Receivers Jarod Wilson
2008-09-09 4:05 ` [PATCH 09/18] lirc driver for the Streamzap PC Receiver Jarod Wilson
2008-09-09 4:05 ` [PATCH 10/18] lirc driver for Igor Cesko's USB IR receiver Jarod Wilson
2008-09-09 4:05 ` [PATCH 11/18] lirc driver for the Technotrend " Jarod Wilson
2008-09-09 4:05 ` [PATCH 12/18] lirc driver for the Sasem OnAir and Dign HV5 receivers Jarod Wilson
2008-09-09 4:05 ` [PATCH 13/18] lirc driver for ITE8709 CIR port receiver Jarod Wilson
2008-09-09 4:05 ` [PATCH 14/18] lirc driver for the ITE IT87xx CIR Port receivers Jarod Wilson
2008-09-09 4:06 ` [PATCH 15/18] lirc driver for the SIR IrDA port Jarod Wilson
2008-09-09 4:06 ` [PATCH 16/18] lirc driver for the IR interface on BT829-based hardware Jarod Wilson
2008-09-09 4:06 ` [PATCH 17/18] lirc driver for homebrew parallel port receivers Jarod Wilson
2008-09-09 4:06 ` [PATCH 18/18] lirc driver for the zilog/haupauge IR transceiver Jarod Wilson
2008-09-09 4:06 ` Jarod Wilson
2008-09-11 15:22 ` [PATCH 09/18] lirc driver for the Streamzap PC Receiver Jonathan Corbet
2008-09-10 21:02 ` [PATCH 08/18] lirc driver for the Soundgraph IMON IR Receivers Jonathan Corbet
2008-09-10 21:23 ` Janne Grunau
2008-09-11 3:22 ` Jarod Wilson
2008-09-22 21:47 ` Jarod Wilson
2008-09-24 20:21 ` Jarod Wilson
2008-09-10 17:09 ` [PATCH 07/18] lirc driver for the CommandIR USB Transceiver Jonathan Corbet
2008-09-11 18:24 ` Christoph Bartelmus
[not found] ` <1221159005.13683.34.camel@minimatt>
2008-09-11 19:03 ` Jarod Wilson
2008-09-11 19:14 ` Janne Grunau
2008-09-25 15:21 ` Jarod Wilson
2008-09-10 9:58 ` [PATCH 06/18] lirc driver for the ATI USB RF remote receiver Ville Syrjälä
2008-09-10 13:05 ` Jarod Wilson
2008-09-10 13:14 ` Christoph Hellwig
2008-09-10 13:37 ` Jon Smirl
2008-09-10 14:30 ` Dmitry Torokhov
2008-09-10 13:44 ` Janne Grunau
2008-09-10 14:13 ` Jarod Wilson
2008-09-10 14:19 ` Christoph Hellwig
2008-09-10 14:08 ` Ville Syrjälä
2008-09-10 14:37 ` Dmitry Torokhov
2008-09-09 4:13 ` [PATCH 05/18] lirc driver for i2c-based IR receivers Jarod Wilson
2008-09-10 15:42 ` Jonathan Corbet
2008-09-09 23:30 ` [PATCH 04/18] lirc driver for 2nd-gen and later Media Center Ed. USB IR transceivers Jonathan Corbet
2008-09-10 0:36 ` Janne Grunau
2008-09-11 9:21 ` Adrian Bunk
2008-09-09 19:21 ` [PATCH 03/18] lirc driver for 1st-gen " Jonathan Corbet
2008-09-09 23:59 ` Janne Grunau
2008-09-10 1:39 ` Jarod Wilson
2008-09-10 0:04 ` Janne Grunau
2008-09-09 16:14 ` [PATCH 02/18] lirc serial port receiver/transmitter device driver Jonathan Corbet
2008-09-09 19:51 ` Stefan Lippers-Hollmann
2008-09-09 19:56 ` Jarod Wilson
2008-09-10 17:40 ` Jarod Wilson
2008-09-09 7:40 ` [PATCH 01/18] lirc core device driver infrastructure Sebastian Siewior
2008-09-09 9:53 ` Janne Grunau
2008-09-09 12:33 ` Sebastian Siewior
2008-09-09 13:10 ` Janne Grunau
2008-09-11 16:41 ` Christoph Bartelmus
2008-09-09 11:13 ` Alan Cox
2008-09-09 13:27 ` Stefan Richter
2008-09-09 17:03 ` Jarod Wilson [this message]
2008-09-11 18:30 ` Christoph Bartelmus
2008-09-11 19:09 ` Jarod Wilson
2008-09-13 7:21 ` Christoph Bartelmus
2008-09-09 9:46 ` Andi Kleen
2008-09-09 11:35 ` Janne Grunau
2008-09-09 13:03 ` Andi Kleen
2008-09-09 13:20 ` Janne Grunau
2008-09-12 16:46 ` Greg KH
2008-09-09 13:01 ` Christoph Hellwig
2008-09-10 12:24 ` Janne Grunau
2008-09-10 12:29 ` Christoph Hellwig
2008-09-10 12:45 ` Janne Grunau
2008-09-11 18:03 ` Christoph Bartelmus
2008-09-11 19:18 ` Janne Grunau
2008-09-12 0:16 ` Janne Grunau
2008-09-12 8:33 ` Christoph Hellwig
2008-09-12 14:51 ` Jarod Wilson
2008-09-09 15:33 ` Jonathan Corbet
2008-09-12 0:12 ` Janne Grunau
2008-09-10 13:08 ` Dmitry Torokhov
2008-09-11 8:47 ` Gerd Hoffmann
2008-09-11 21:28 ` Maxim Levitsky
2008-09-13 7:20 ` Christoph Bartelmus
2008-09-12 4:44 ` Dmitry Torokhov
2008-09-09 4:36 ` [PATCH 0/18] linux infrared remote control drivers Chris Wedgwood
2008-09-09 7:06 ` Alexey Dobriyan
2008-09-09 8:32 ` Janne Grunau
2008-09-09 12:46 ` Christoph Hellwig
2008-09-09 15:23 ` Jarod Wilson
2008-09-09 18:27 ` Lennart Sorensen
2008-09-09 18:34 ` Jarod Wilson
2008-09-09 15:34 ` Jon Smirl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200809091303.27742.jwilson@redhat.com \
--to=jwilson@redhat.com \
--cc=j@jannau.net \
--cc=linux-kernel@vger.kernel.org \
--cc=lirc@bartelmus.de \
--cc=lkml@ml.breakpoint.cc \
--cc=superm1@ubuntu.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox