Re: 2.6.27-rc7 no init found on the root partition?

Dave Chinner
2008-09-25T23:41:44Z

On Thu, Sep 25, 2008 at 01:12:40PM +0200, Lukas Hejtmanek wrote:
> On Thu, Sep 25, 2008 at 09:03:26AM +1000, Dave Chinner wrote:
> > On Wed, Sep 24, 2008 at 09:22:27PM +0200, Lukas Hejtmanek wrote:
> > > Hello,
> > >
> > > I have a box that has XFS root partition, I have kernel
> > > 2.6.26.3 that boots pretty well on that box. Today, I've tried
> > > 2.6.27-rc7 (so that I can test NFSv4 over IPv6), but the
> > > kernel is unable to boot. It says that root partition is
> > > mounted, XFS file system but no init found.
> >
> > Can you paste the error messages or send pointers to screen
> > shots of the error?
>
> http://undomiel.ics.muni.cz/tmp/IMG_2962.JPG

Hmmm - the filesystem mounted without errors, but init was not
found. Strange.

> this one is if I pass init=/bin/bash
> http://undomiel.ics.muni.cz/tmp/IMG_2961.JPG

Same again, it's unable to run the init process.

Of course, kernel_execve() throws away any error that might
have occurred, so without hacking the init code we can't find out
why it failed.

> > If you go back to 2.6.26.3, does the kernel boot ok?
>
> indeed.

Ok, is the 2.6.27 kernel based on the same config as the 2.6.26
kernel?

> this is a grub record:
>
> title Linux 2.6.26.3 root (hd0,0) kernel /boot/vmlinuz-2.6.26.3
> root=/dev/sda1 ro console=tty0
>
> title Linux 2.6.27-rc7 root (hd0,0) kernel
> /boot/vmlinuz-2.6.27-rc7 root=/dev/sda1 ro

Does it boot if you take away the "ro" option?

Cheers,

Dave.
>
>
> -- Lukáš Hejtmánek
>
>
>

--
Dave Chinner
david@fromorbit.com