From: Alan Cox <alan@redhat.com>
To: linux-kernel@vger.kernel.org
Subject: [PATCH 53/76] tty: Finish fixing up the init_dev interface to use ERR_PTR
Date: Sun, 05 Oct 2008 17:20:55 +0100 [thread overview]
Message-ID: <20081005162052.1997.26838.stgit@localhost.localdomain> (raw)
In-Reply-To: <20081005160231.1997.10462.stgit@localhost.localdomain>
Original suggestion and proposal from Sukadev Bhattiprolu.
Signed-off-by: Alan Cox <alan@redhat.com>
---
drivers/char/pty.c | 6 ++++--
drivers/char/tty_io.c | 52 ++++++++++++++++++++-----------------------------
include/linux/tty.h | 4 ++--
3 files changed, 27 insertions(+), 35 deletions(-)
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 4e6490b..c984500 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -501,11 +501,13 @@ static int __ptmx_open(struct inode *inode, struct file *filp)
return index;
mutex_lock(&tty_mutex);
- retval = tty_init_dev(ptm_driver, index, &tty, 1);
+ tty = tty_init_dev(ptm_driver, index, 1);
mutex_unlock(&tty_mutex);
- if (retval)
+ if (IS_ERR(tty)) {
+ retval = PTR_ERR(tty);
goto out;
+ }
set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */
filp->private_data = tty;
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 888380f..b0ad488 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1324,35 +1324,32 @@ static int tty_reopen(struct tty_struct *tty)
* relaxed for the (most common) case of reopening a tty.
*/
-int tty_init_dev(struct tty_driver *driver, int idx,
- struct tty_struct **ret_tty, int first_ok)
+struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx,
+ int first_ok)
{
struct tty_struct *tty, *o_tty;
struct ktermios *tp, **tp_loc, *o_tp, **o_tp_loc;
struct ktermios *ltp, **ltp_loc, *o_ltp, **o_ltp_loc;
- int retval = 0;
+ int retval;
/* check whether we're reopening an existing tty */
tty = tty_driver_lookup_tty(driver, idx);
- if (IS_ERR(tty)) {
- retval = PTR_ERR(tty);
- goto end_init;
- }
+
+ if (IS_ERR(tty))
+ return tty;
if (tty) {
retval = tty_reopen(tty);
if (retval)
- return retval;
- *ret_tty = tty;
- return 0;
+ return ERR_PTR(retval);
+ return tty;
}
/* Check if pty master is being opened multiple times */
if (driver->subtype == PTY_TYPE_MASTER &&
- (driver->flags & TTY_DRIVER_DEVPTS_MEM) && !first_ok) {
- retval = -EIO;
- goto end_init;
- }
+ (driver->flags & TTY_DRIVER_DEVPTS_MEM) && !first_ok)
+ return ERR_PTR(-EIO);
+
/*
* First time open is complex, especially for PTY devices.
* This code guarantees that either everything succeeds and the
@@ -1361,10 +1358,8 @@ int tty_init_dev(struct tty_driver *driver, int idx,
* and locked termios may be retained.)
*/
- if (!try_module_get(driver->owner)) {
- retval = -ENODEV;
- goto end_init;
- }
+ if (!try_module_get(driver->owner))
+ return ERR_PTR(-ENODEV);
o_tty = NULL;
tp = o_tp = NULL;
@@ -1475,7 +1470,8 @@ int tty_init_dev(struct tty_driver *driver, int idx,
tty_driver_kref_get(driver);
tty->count++;
- if (tty_driver_install_tty(driver, tty) < 0)
+ retval = tty_driver_install_tty(driver, tty);
+ if (retval < 0)
goto release_mem_out;
/*
@@ -1485,14 +1481,9 @@ int tty_init_dev(struct tty_driver *driver, int idx,
*/
retval = tty_ldisc_setup(tty, o_tty);
-
if (retval)
goto release_mem_out;
-
- *ret_tty = tty;
- /* All paths come through here to release the mutex */
-end_init:
- return retval;
+ return tty;
/* Release locally allocated memory ... nothing placed in slots */
free_mem_out:
@@ -1507,8 +1498,7 @@ free_mem_out:
fail_no_mem:
module_put(driver->owner);
- retval = -ENOMEM;
- goto end_init;
+ return ERR_PTR(-ENOMEM);
/* call the tty release_tty routine to clean out this slot */
release_mem_out:
@@ -1516,7 +1506,7 @@ release_mem_out:
printk(KERN_INFO "tty_init_dev: ldisc open failed, "
"clearing slot %d\n", idx);
release_tty(tty, idx);
- goto end_init;
+ return ERR_PTR(retval);
}
void tty_free_termios(struct tty_struct *tty)
@@ -1925,11 +1915,11 @@ retry_open:
return -ENODEV;
}
got_driver:
- retval = tty_init_dev(driver, index, &tty, 0);
+ tty = tty_init_dev(driver, index, 0);
mutex_unlock(&tty_mutex);
tty_driver_kref_put(driver);
- if (retval)
- return retval;
+ if (IS_ERR(tty))
+ return PTR_ERR(tty);
filp->private_data = tty;
file_move(filp, &tty->tty_files);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 6cc7ccc..54523a3 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -401,8 +401,8 @@ extern dev_t tty_devnum(struct tty_struct *tty);
extern void proc_clear_tty(struct task_struct *p);
extern struct tty_struct *get_current_tty(void);
extern void tty_default_fops(struct file_operations *fops);
-extern int tty_init_dev(struct tty_driver *driver, int idx,
- struct tty_struct **ret_tty, int first_ok);
+extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx,
+ int first_ok);
extern void tty_release_dev(struct file *filp);
extern struct mutex tty_mutex;
next prev parent reply other threads:[~2008-10-05 16:24 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-05 16:04 [PATCH 00/76] Queued TTY Patches Alan Cox
2008-10-05 16:04 ` [PATCH 01/76] drivers/serial/crisv10.c: add missing put_tty_driver Alan Cox
2008-10-05 16:04 ` [PATCH 02/76] drivers/char/hvc_console.c: adjust call to put_tty_driver Alan Cox
2008-10-05 16:04 ` [PATCH 03/76] coldfire: scheduled SERIAL_COLDFIRE removal Alan Cox
2008-10-05 16:05 ` [PATCH 04/76] epca: call tty_port_init Alan Cox
2008-10-05 16:05 ` [PATCH 05/76] 8250: Remove NR_IRQ usage Alan Cox
2008-10-05 16:05 ` [PATCH 06/76] Blackfin Serial Driver: use __initdata for data, not __init Alan Cox
2008-10-05 16:05 ` [PATCH 07/76] Blackfin Serial Driver: Fix bug - should suspend/resume/remove all uart ports Alan Cox
2008-10-05 16:05 ` [PATCH 08/76] Blackfin Serial Driver: trim trailing whitespace -- no functional changes Alan Cox
2008-10-05 16:05 ` [PATCH 09/76] Blackfin Serial Driver: move common variables out of serial headers and into the serial driver Alan Cox
2008-10-05 16:05 ` [PATCH 10/76] Blackfin Serial Driver: Remove useless stop Alan Cox
2008-10-05 16:06 ` [PATCH 11/76] Blackfin Serial Driver: Fix bug - Don't call tx_stop in tx_transfer Alan Cox
2008-10-05 16:06 ` [PATCH 12/76] Blackfin Serial Driver: Fix bug - ircp fails on sir over Blackfin UART Alan Cox
2008-10-05 16:06 ` [PATCH 13/76] Blackfin Serial Driver: Fix bug - request UART2/3 peripheral mapped interrupts in PIO mode Alan Cox
2008-10-05 16:06 ` [PATCH 14/76] tty: move tioclinux from a special case Alan Cox
2008-10-05 16:06 ` [PATCH 15/76] uml: small cleanups and note bugs to be dealt with by uml authors Alan Cox
2008-10-05 16:06 ` [PATCH 16/76] Char: merge ip2main and ip2base Alan Cox
2008-10-05 16:06 ` [PATCH 17/76] ip2, cleanup globals Alan Cox
2008-10-05 16:07 ` [PATCH 18/76] ip2, fix sparse warnings Alan Cox
2008-10-05 16:07 ` [PATCH 19/76] ip2, init/deinit cleanup Alan Cox
2008-10-05 16:07 ` [PATCH 20/76] ip2: avoid add_timer with pending timer Alan Cox
2008-10-05 16:07 ` [PATCH 21/76] audit: Handle embedded NUL in TTY input auditing Alan Cox
2008-10-05 16:07 ` [PATCH 22/76] serial: Make uart_port's ioport "unsigned long" Alan Cox
2008-10-06 12:53 ` Josh Boyer
2008-10-05 16:07 ` [PATCH 23/76] tty: split the buffering from tty_io Alan Cox
2008-10-05 16:07 ` [PATCH 24/76] tty: Split tty_port into its own file Alan Cox
2008-10-05 16:08 ` [PATCH 25/76] pps: Reserve a line discipline number for PPS Alan Cox
2008-10-05 16:08 ` [PATCH 26/76] tty: Add a kref count Alan Cox
2008-10-06 10:20 ` Louis Rilling
2008-10-06 10:52 ` Alan Cox
2008-10-05 16:08 ` [PATCH 27/76] tty: use krefs to protect driver module counts Alan Cox
2008-10-05 16:08 ` [PATCH 28/76] Char: cyclades. remove bogus iomap Alan Cox
2008-10-05 16:08 ` [PATCH 29/76] Char: sx, fix io unmapping Alan Cox
2008-10-05 16:08 ` [PATCH 30/76] 8250: remove a few inlines of dubious value Alan Cox
2008-10-05 16:09 ` [PATCH 31/76] tty: Cris has a nice RS485 ioctl so we should steal it Alan Cox
2008-10-05 16:09 ` [PATCH 32/76] tty: ipw need reworking Alan Cox
2008-10-05 16:09 ` [PATCH 33/76] tty: Add termiox Alan Cox
2008-10-05 16:10 ` [PATCH 34/76] tty: Termios locking - sort out real_tty confusions and lock reads Alan Cox
2008-10-05 16:10 ` [PATCH 35/76] tty: compare the tty winsize Alan Cox
2008-10-05 16:10 ` [PATCH 36/76] tty: Make get_current_tty use a kref Alan Cox
2008-10-06 10:35 ` Louis Rilling
2008-10-06 10:56 ` Alan Cox
2008-10-05 16:10 ` [PATCH 37/76] tty: Move tty_write_message out of kernel/printk Alan Cox
2008-10-05 16:11 ` [PATCH 38/76] tty: usb-serial krefs Alan Cox
2008-10-06 5:36 ` Greg KH
2008-10-06 9:02 ` Alan Cox
2008-10-07 4:13 ` Greg KH
2008-10-05 16:12 ` [PATCH 39/76] tty: kref usage for isicom and moxa Alan Cox
2008-10-05 16:13 ` [PATCH 40/76] stallion: Use krefs Alan Cox
2008-10-05 16:14 ` [PATCH 41/76] mxser: Switch to kref tty Alan Cox
2008-10-05 16:15 ` [PATCH 42/76] tty: the vhangup syscall is racy Alan Cox
2008-10-05 16:15 ` [PATCH 43/76] tty: Redo current tty locking Alan Cox
2008-10-09 13:21 ` Derek Fawcus
2008-10-05 16:16 ` [PATCH 44/76] tty: Fix abusers of current->sighand->tty Alan Cox
2008-10-05 16:17 ` [PATCH 45/76] pty: If the administrator creates a device for a ptmx slave we should not error Alan Cox
2008-10-05 16:18 ` [PATCH 46/76] vt: remove bogus lock dropping Alan Cox
2008-10-05 16:18 ` [PATCH 47/76] tty: shutdown method Alan Cox
2008-10-05 16:18 ` [PATCH 48/76] tty: Remove more special casing and out of place code Alan Cox
2008-10-05 16:19 ` [PATCH 49/76] tty: Move parts of tty_init_dev into new functions Alan Cox
2008-10-05 16:19 ` [PATCH 50/76] tty: Clean up the tty_init_dev changes further Alan Cox
2008-10-05 16:20 ` [PATCH 51/76] tty: kref the tty driver object Alan Cox
2008-10-05 16:20 ` [PATCH 52/76] tty: More driver operations Alan Cox
2008-10-05 16:20 ` Alan Cox [this message]
2008-10-05 16:21 ` [PATCH 54/76] tty: extract the pty init time special cases Alan Cox
2008-10-05 16:21 ` [PATCH 55/76] Move tty lookup/reopen to caller Alan Cox
2008-10-05 16:21 ` [PATCH 56/76] Add an instance parameter devpts interfaces Alan Cox
2008-10-05 16:21 ` [PATCH 57/76] Simplify devpts_get_tty() Alan Cox
2008-10-05 16:21 ` [PATCH 58/76] Simplify devpts_pty_new() Alan Cox
2008-10-05 16:21 ` [PATCH 59/76] Simplify devpts_pty_kill Alan Cox
2008-10-05 16:22 ` [PATCH 60/76] pty: Coding style and polish Alan Cox
2008-10-05 16:22 ` [PATCH 61/76] pty: Fix allocation failure double free Alan Cox
2008-10-05 16:22 ` [PATCH 62/76] pty: simplify unix98 allocation Alan Cox
2008-10-05 16:22 ` [PATCH 63/76] tty: simplify ktermios allocation Alan Cox
2008-10-05 16:22 ` [PATCH 64/76] tty: some ICANON magic is in the wrong places Alan Cox
2008-10-05 16:23 ` [PATCH 65/76] tty: Fallout from tty-move-canon-specials Alan Cox
2008-10-05 16:23 ` [PATCH 66/76] tty: fix up gigaset a bit Alan Cox
2008-10-05 16:23 ` [PATCH 67/76] tty: Remove lots of NULL checks Alan Cox
2008-10-06 8:58 ` Geert Uytterhoeven
2008-10-06 10:50 ` Alan Cox
2008-10-05 16:23 ` [PATCH 68/76] tty: Minor tidyups and document fixes for n_tty Alan Cox
2008-10-05 16:24 ` [PATCH 69/76] hso: net driver using tty without locking Alan Cox
2008-10-05 16:24 ` [PATCH 70/76] applicom: Fix an unchecked user ioctl range and an error return Alan Cox
2008-10-05 16:24 ` [PATCH 71/76] serial-make-uart_ports-ioport-unsigned-long-fix Alan Cox
2008-10-05 16:24 ` [PATCH 72/76] serial: allow 8250 to be used on sparc Alan Cox
2008-10-05 16:24 ` [PATCH 73/76] serial: fix device name reporting when minor space is shared between drivers Alan Cox
2008-10-05 16:25 ` [PATCH 74/76] tty: tty_io.c shadows sparse fix Alan Cox
2008-10-05 16:25 ` [PATCH 75/76] usb: fix pl2303 initialization Alan Cox
2008-10-05 16:25 ` [PATCH 76/76] ftdi: A few errors are err() that should be debug which causes much spewage Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081005162052.1997.26838.stgit@localhost.localdomain \
--to=alan@redhat.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox