[PATCH] powerpc: fix fsl_upm nand driver modular build

Anton Vorontsov
2008-10-09T00:33:24Z

The fsl_upm nand driver fails to build because fsl_lbc_lock isn't
exported, the lock is needed by the inlined fsl_upm_run_pattern()
function:

ERROR: "fsl_lbc_lock" [drivers/mtd/nand/fsl_upm.ko] undefined!

Dave Jones purposed to export the lock, but it is better to just uninline
the fsl_upm_run_pattern().

When uninlined we also no longer need the exported fsl_lbc_regs, and
both fsl_lbc_lock and fsl_lbc_regs could be marked static.

While at it, also add some missing includes that we should have included
explicitly.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---

On Wed, Oct 08, 2008 at 07:33:06PM -0400, Dave Jones wrote:
[...]
> > > ERROR: "fsl_lbc_lock" [drivers/mtd/nand/fsl_upm.ko] undefined!
> >
> > Weird. It works for me with mpc836x_rdk_defconfig and
> > MTD_NAND_FSL_UPM=m...
> >
> > Hm..
> >
> > CC drivers/mtd/nand/fsl_upm.mod.o
> > LD [M] drivers/mtd/nand/fsl_upm.ko
> >
> > Can you send me the .config file you use?
>
> http://davej.fedorapeople.org/ppc.config

Still works here. :-/ I'm using latest Linus' git tree, pulled few
minutes ago just in case.

gcc version 4.2.0 (MontaVista 4.2.0-16.0.20.0800760 2008-04-05)
GNU ld (GNU Binutils) 2.17.50.20070611

Most probably something on my side, maybe need to update the toolchain.

> > But the patch looks obviously correct. Much thanks for catching this.
> >
> > Though better option would be to uninline the fsl_upm_run_pattern()..
> > it is quite big anyway... Something like this:
>
> I'll leave it to you to decide what to push to Linus

Ok, here it is. Since I'm unable to reproduce the error, I'd
appreciate Tested-by: tag if you could find time to build-test
the patch. It works for me though...

Thanks again,

arch/powerpc/include/asm/fsl_lbc.h | 48 +++-----------------------------
arch/powerpc/sysdev/fsl_lbc.c | 53 +++++++++++++++++++++++++++++++++---
2 files changed, 53 insertions(+), 48 deletions(-)

diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
index 303f548..63a4f77 100644
--- a/arch/powerpc/include/asm/fsl_lbc.h
+++ b/arch/powerpc/include/asm/fsl_lbc.h
@@ -23,9 +23,9 @@
#ifndef __ASM_FSL_LBC_H
#define __ASM_FSL_LBC_H

+#include <linux/compiler.h>
#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <asm/io.h>
+#include <linux/io.h>

struct fsl_lbc_bank {
__be32 br; /**< Base Register */
@@ -227,9 +227,6 @@ struct fsl_lbc_regs {
u8 res8[0xF00];
};

-extern struct fsl_lbc_regs __iomem *fsl_lbc_regs;
-extern spinlock_t fsl_lbc_lock;
-
/*
* FSL UPM routines
*/
@@ -268,44 +265,7 @@ static inline void fsl_upm_end_pattern(struct fsl_upm *upm)
cpu_relax();
}

-/**
- * fsl_upm_run_pattern - actually run an UPM pattern
- * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find
- * @io_base: remapped pointer to where memory access should happen
- * @mar: MAR register content during pattern execution
- *
- * This function triggers dummy write to the memory specified by the io_base,
- * thus UPM pattern actually executed. Note that mar usage depends on the
- * pre-programmed AMX bits in the UPM RAM.
- */
-static inline int fsl_upm_run_pattern(struct fsl_upm *upm,
- void __iomem *io_base, u32 mar)
-{
- int ret = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&fsl_lbc_lock, flags);
-
- out_be32(&fsl_lbc_regs->mar, mar << (32 - upm->width));
-
- switch (upm->width) {
- case 8:
- out_8(io_base, 0x0);
- break;
- case 16:
- out_be16(io_base, 0x0);
- break;
- case 32:
- out_be32(io_base, 0x0);
- break;
- default:
- ret = -EINVAL;
- break;
- }
-
- spin_unlock_irqrestore(&fsl_lbc_lock, flags);
-
- return ret;
-}
+extern int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base,
+ u32 mar);

#endif /* __ASM_FSL_LBC_H */
diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c
index 422c8fa..0494ee5 100644
--- a/arch/powerpc/sysdev/fsl_lbc.c
+++ b/arch/powerpc/sysdev/fsl_lbc.c
@@ -11,14 +11,19 @@
* (at your option) any later version.
*/

+#include <linux/init.h>
+#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/io.h>
#include <linux/of.h>
+#include <asm/prom.h>
#include <asm/fsl_lbc.h>

-spinlock_t fsl_lbc_lock = __SPIN_LOCK_UNLOCKED(fsl_lbc_lock);
-
-struct fsl_lbc_regs __iomem *fsl_lbc_regs;
-EXPORT_SYMBOL(fsl_lbc_regs);
+static spinlock_t fsl_lbc_lock = __SPIN_LOCK_UNLOCKED(fsl_lbc_lock);
+static struct fsl_lbc_regs __iomem *fsl_lbc_regs;

static char __initdata *compat_lbc[] = {
"fsl,pq2-localbus",
@@ -127,3 +132,43 @@ int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm)
return 0;
}
EXPORT_SYMBOL(fsl_upm_find);
+
+/**
+ * fsl_upm_run_pattern - actually run an UPM pattern
+ * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find
+ * @io_base: remapped pointer to where memory access should happen
+ * @mar: MAR register content during pattern execution
+ *
+ * This function triggers dummy write to the memory specified by the io_base,
+ * thus UPM pattern actually executed. Note that mar usage depends on the
+ * pre-programmed AMX bits in the UPM RAM.
+ */
+int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base, u32 mar)
+{
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&fsl_lbc_lock, flags);
+
+ out_be32(&fsl_lbc_regs->mar, mar << (32 - upm->width));
+
+ switch (upm->width) {
+ case 8:
+ out_8(io_base, 0x0);
+ break;
+ case 16:
+ out_be16(io_base, 0x0);
+ break;
+ case 32:
+ out_be32(io_base, 0x0);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ spin_unlock_irqrestore(&fsl_lbc_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(fsl_upm_run_pattern);
--
1.5.6.3