From: Alan Cox <alan@redhat.com>
To: torvalds@osdl.org, linux-kernel@vger.kernel.org,
linux-serial@vger.kernel.org
Subject: [PATCH 08/27] Blackfin Serial Driver: move common variables out of serial headers and into the serial driver
Date: Fri, 10 Oct 2008 11:48:48 +0100 [thread overview]
Message-ID: <20081010104845.31597.37401.stgit@localhost.localdomain> (raw)
In-Reply-To: <20081010103447.31597.42992.stgit@localhost.localdomain>
From: Mike Frysinger <vapier.adi@gmail.com>
move common variables out of serial headers and into the serial driver and
rename "nr_ports" to "nr_active_ports" so as to easily differentiat
between BFIN_UART_NR_PORTS (the # of available) and nr_ports (the # of enabled)
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
---
.../mach-bf527/include/mach/bfin_serial_5xx.h | 3 ---
.../mach-bf533/include/mach/bfin_serial_5xx.h | 2 --
.../mach-bf537/include/mach/bfin_serial_5xx.h | 3 ---
.../mach-bf548/include/mach/bfin_serial_5xx.h | 3 ---
.../mach-bf561/include/mach/bfin_serial_5xx.h | 2 --
drivers/serial/bfin_5xx.c | 17 ++++++++++-------
6 files changed, 10 insertions(+), 20 deletions(-)
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
index 2526b6e..a23d047 100644
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
@@ -119,7 +119,6 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
bfin_write16(uart->port.membase + OFFSET_LSR, -1);
}
-struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
struct bfin_serial_res {
unsigned long uart_base_addr;
int uart_irq;
@@ -164,8 +163,6 @@ struct bfin_serial_res bfin_serial_resource[] = {
#endif
};
-int nr_ports = ARRAY_SIZE(bfin_serial_resource);
-
#define DRIVER_NAME "bfin-uart"
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index ebf592b..20471cd 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -111,7 +111,6 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
bfin_write16(uart->port.membase + OFFSET_LSR, -1);
}
-struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
struct bfin_serial_res {
unsigned long uart_base_addr;
int uart_irq;
@@ -142,7 +141,6 @@ struct bfin_serial_res bfin_serial_resource[] = {
#define DRIVER_NAME "bfin-uart"
-int nr_ports = BFIN_UART_NR_PORTS;
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
{
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
index 1bf56ff..08dfe30 100644
--- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
@@ -119,7 +119,6 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
bfin_write16(uart->port.membase + OFFSET_LSR, -1);
}
-struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
struct bfin_serial_res {
unsigned long uart_base_addr;
int uart_irq;
@@ -164,8 +163,6 @@ struct bfin_serial_res bfin_serial_resource[] = {
#endif
};
-int nr_ports = ARRAY_SIZE(bfin_serial_resource);
-
#define DRIVER_NAME "bfin-uart"
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
index 5e29446..76976b1 100644
--- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
@@ -105,7 +105,6 @@ struct bfin_serial_port {
#endif
};
-struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
struct bfin_serial_res {
unsigned long uart_base_addr;
int uart_irq;
@@ -170,8 +169,6 @@ struct bfin_serial_res bfin_serial_resource[] = {
#endif
};
-int nr_ports = ARRAY_SIZE(bfin_serial_resource);
-
#define DRIVER_NAME "bfin-uart"
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
index 8aa0278..6cddca4 100644
--- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
@@ -111,7 +111,6 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
bfin_write16(uart->port.membase + OFFSET_LSR, -1);
}
-struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
struct bfin_serial_res {
unsigned long uart_base_addr;
int uart_irq;
@@ -142,7 +141,6 @@ struct bfin_serial_res bfin_serial_resource[] = {
#define DRIVER_NAME "bfin-uart"
-int nr_ports = BFIN_UART_NR_PORTS;
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
{
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 976de91..382fb8d 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -42,6 +42,9 @@
#define BFIN_SERIAL_MAJOR 204
#define BFIN_SERIAL_MINOR 64
+static struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
+static int nr_active_ports = ARRAY_SIZE(bfin_serial_resource);
+
/*
* Setup for console. Argument comes from the menuconfig
*/
@@ -859,7 +862,7 @@ static void __init bfin_serial_init_ports(void)
return;
first = 0;
- for (i = 0; i < nr_ports; i++) {
+ for (i = 0; i < nr_active_ports; i++) {
bfin_serial_ports[i].port.uartclk = get_sclk();
bfin_serial_ports[i].port.ops = &bfin_serial_pops;
bfin_serial_ports[i].port.line = i;
@@ -961,7 +964,7 @@ bfin_serial_console_setup(struct console *co, char *options)
* if so, search for the first available port that does have
* console support.
*/
- if (co->index == -1 || co->index >= nr_ports)
+ if (co->index == -1 || co->index >= nr_active_ports)
co->index = 0;
uart = &bfin_serial_ports[co->index];
@@ -1072,7 +1075,7 @@ struct console __init *bfin_earlyserial_init(unsigned int port,
struct bfin_serial_port *uart;
struct ktermios t;
- if (port == -1 || port >= nr_ports)
+ if (port == -1 || port >= nr_active_ports)
port = 0;
bfin_serial_init_ports();
bfin_early_serial_console.index = port;
@@ -1102,7 +1105,7 @@ static int bfin_serial_suspend(struct platform_device *dev, pm_message_t state)
{
int i;
- for (i = 0; i < nr_ports; i++) {
+ for (i = 0; i < nr_active_ports; i++) {
if (bfin_serial_ports[i].port.dev != &dev->dev)
continue;
uart_suspend_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
@@ -1115,7 +1118,7 @@ static int bfin_serial_resume(struct platform_device *dev)
{
int i;
- for (i = 0; i < nr_ports; i++) {
+ for (i = 0; i < nr_active_ports; i++) {
if (bfin_serial_ports[i].port.dev != &dev->dev)
continue;
uart_resume_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
@@ -1134,7 +1137,7 @@ static int bfin_serial_probe(struct platform_device *dev)
break;
if (i < dev->num_resources) {
- for (i = 0; i < nr_ports; i++, res++) {
+ for (i = 0; i < nr_active_ports; i++, res++) {
if (bfin_serial_ports[i].port.mapbase != res->start)
continue;
bfin_serial_ports[i].port.dev = &dev->dev;
@@ -1149,7 +1152,7 @@ static int bfin_serial_remove(struct platform_device *dev)
{
int i;
- for (i = 0; i < nr_ports; i++) {
+ for (i = 0; i < nr_active_ports; i++) {
if (bfin_serial_ports[i].port.dev != &dev->dev)
continue;
uart_remove_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
next prev parent reply other threads:[~2008-10-10 10:49 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-10 10:36 [PATCH 00/27] First block of the tty backlog Alan Cox
2008-10-10 10:36 ` [PATCH 01/27] drivers/serial/crisv10.c: add missing put_tty_driver Alan Cox
2008-12-28 22:24 ` Should <linux/serial.h> define __u32? walt
2008-12-29 0:53 ` Alan Cox
2008-12-29 12:35 ` Mike Frysinger
2008-10-10 10:36 ` [PATCH 02/27] drivers/char/hvc_console.c: adjust call to put_tty_driver Alan Cox
2008-10-10 10:36 ` [PATCH 03/27] coldfire: scheduled SERIAL_COLDFIRE removal Alan Cox
2008-10-10 10:37 ` [PATCH 04/27] epca: call tty_port_init Alan Cox
2008-10-10 10:48 ` [PATCH 05/27] Blackfin Serial Driver: use __initdata for data, not __init Alan Cox
2008-10-10 10:48 ` [PATCH 06/27] Blackfin Serial Driver: Fix bug - should suspend/resume/remove all uart ports Alan Cox
2008-10-10 10:48 ` [PATCH 07/27] Blackfin Serial Driver: trim trailing whitespace -- no functional changes Alan Cox
2008-10-10 10:48 ` Alan Cox [this message]
2008-10-10 10:48 ` [PATCH 09/27] Blackfin Serial Driver: Remove useless stop Alan Cox
2008-10-10 10:49 ` [PATCH 10/27] Blackfin Serial Driver: Fix bug - Don't call tx_stop in tx_transfer Alan Cox
2008-10-10 10:49 ` [PATCH 11/27] Blackfin Serial Driver: Fix bug - ircp fails on sir over Blackfin UART Alan Cox
2008-10-10 10:49 ` [PATCH 12/27] Blackfin Serial Driver: Fix bug - request UART2/3 peripheral mapped interrupts in PIO mode Alan Cox
2008-10-10 10:49 ` [PATCH 13/27] Fix oti6858 debug level Alan Cox
2008-10-10 10:49 ` [PATCH 14/27] Char: cyclades. remove bogus iomap Alan Cox
2008-10-10 10:49 ` [PATCH 15/27] Char: sx, fix io unmapping Alan Cox
2008-10-10 10:50 ` [PATCH 16/27] Char: merge ip2main and ip2base Alan Cox
2008-10-10 10:50 ` [PATCH 17/27] ip2, cleanup globals Alan Cox
2008-10-10 10:50 ` [PATCH 18/27] ip2, fix sparse warnings Alan Cox
2008-10-10 10:50 ` [PATCH 19/27] ip2, init/deinit cleanup Alan Cox
2008-10-10 10:50 ` [PATCH 20/27] ip2: avoid add_timer with pending timer Alan Cox
2008-10-10 10:50 ` [PATCH 21/27] audit: Handle embedded NUL in TTY input auditing Alan Cox
2008-10-10 10:50 ` [PATCH 22/27] serial: Make uart_port's ioport "unsigned long" Alan Cox
2008-10-10 12:54 ` Josh Boyer
2008-10-10 16:19 ` David Miller
2008-10-10 10:51 ` [PATCH 23/27] nozomi: Fix close on error Alan Cox
2008-10-10 10:51 ` [PATCH 24/27] serial-make-uart_ports-ioport-unsigned-long-fix Alan Cox
2008-10-10 10:51 ` [PATCH 25/27] usb: fix pl2303 initialization Alan Cox
2008-10-10 10:51 ` [PATCH 26/27] ftdi: A few errors are err() that should be debug which causes much spewage Alan Cox
2008-10-10 10:52 ` [PATCH 27/27] serial_8250: pci_enable_device fail is not fully handled Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081010104845.31597.37401.stgit@localhost.localdomain \
--to=alan@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox