[PATCH 25/27] usb: fix pl2303 initialization

[Alan Cox <alan@redhat.com>]

From: Jason Wessel <jason.wessel@windriver.com>

This patch removes the private check for the termios_initialized for
the pl2303 usb driver.  It forced the baud to 9600 on the first call
to pl2303_set_termios()

Based on the tty changes in the 2.6.27 kernel, the termios passed to
the *_set_termios functions is always populated the first time.

This means there is no need to privately initialize the settings the
first time, and doing so will not allow the use of the kernel
parameter "console=ttyUSB0,115200" as an example.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Alan Cox <alan@redhat.com>
---

 drivers/usb/serial/pl2303.c |   11 -----------
 1 files changed, 0 insertions(+), 11 deletions(-)

diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 1ede144..8d60068 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -154,7 +154,6 @@ struct pl2303_private {
 	wait_queue_head_t delta_msr_wait;
 	u8 line_control;
 	u8 line_status;
-	u8 termios_initialized;
 	enum pl2303_type type;
 };
 
@@ -526,16 +525,6 @@ static void pl2303_set_termios(struct tty_struct *tty,
 
 	dbg("%s -  port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->lock, flags);
-	if (!priv->termios_initialized) {
-		*(tty->termios) = tty_std_termios;
-		tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
-		tty->termios->c_ispeed = 9600;
-		tty->termios->c_ospeed = 9600;
-		priv->termios_initialized = 1;
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	/* The PL2303 is reported to lose bytes if you change
 	   serial settings even to the same values as before. Thus
 	   we actually need to filter in this specific case */