[PATCH] x86: apic - unify APIC_DIVISOR

[Cyrill Gorcunov <gorcunov@gmail.com>]

Use APIC_DIVISOR being set to 16 for both 32/64bit
mode. To escape APIC timer underflow during calibration
set it to the maximum possible value.

Also typo error (CONFG instead of proper CONFIG) fixed.
The error was catched by Venkatesh Pallipadi, thanks a lot Venkatesh!
See details on http://lkml.org/lkml/2008/10/9/425

Reported-by: Venkatesh Pallipad <venkatesh.pallipadi@intel.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
---

Index: linux-2.6.git/arch/x86/kernel/apic.c
===================================================================
--- linux-2.6.git.orig/arch/x86/kernel/apic.c	2008-09-26 20:43:47.000000000 +0400
+++ linux-2.6.git/arch/x86/kernel/apic.c	2008-10-10 16:37:26.000000000 +0400
@@ -332,11 +332,7 @@ int lapic_get_maxlvt(void)
  */
 
 /* Clock divisor */
-#ifdef CONFG_X86_64
-#define APIC_DIVISOR 1
-#else
 #define APIC_DIVISOR 16
-#endif
 
 /*
  * This function sets up the local APIC timer, with a timeout of
@@ -592,10 +588,10 @@ static int __init calibrate_APIC_clock(v
 	global_clock_event->event_handler = lapic_cal_handler;
 
 	/*
-	 * Setup the APIC counter to 1e9. There is no way the lapic
+	 * Setup the APIC counter to maximum. There is no way the lapic
 	 * can underflow in the 100ms detection time frame
 	 */
-	__setup_APIC_LVTT(1000000000, 0, 0);
+	__setup_APIC_LVTT(0xffffffff, 0, 0);
 
 	/* Let the interrupts run */
 	local_irq_enable();