Re: Strange ACPI errors sometimes after resume from s2disk

["Rafael J. Wysocki" <rjw@sisk.pl>]

[Adding CCs]

On Wednesday, 22 of October 2008, Dmitry Nezhevenko wrote:
> Hiall. Just got these strange messages with 2.6.27.2. They flood dmesg.. (same block every second). 
> 
> [42016.520062] ACPI: EC: acpi_ec_wait timeout, status = 0x1a, event = "b1=0"
> [42016.520079] ACPI: EC: input buffer is not empty, aborting transaction
> [42017.025050] ACPI: EC: acpi_ec_wait timeout, status = 0x1a, event = "b1=0"
> [42017.025197] ACPI: EC: input buffer is not empty, aborting transaction
> [42017.025254] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
> [42017.025350] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC__.BAT1.UPBS] (Node f78353b0), AE_TIME
> [42017.025546] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC__.BAT1._BST] (Node f7835400), AE_TIME
> [42017.025715] ACPI Exception (battery-0360): AE_TIME, Evaluating _BST [20080609]
> 
> Battery state "freezes" after this.. So if it was charged to 90%, it will
> be 90% forever.  Also information about charger (plugged/unplugged) is not
> updating... BIOS automatically increases display brightness just after
> plugging charger but powersave thinks that it's unplugged.
> 
> After turning laptop off I can't turn it on any more.. I can hear fan noise,
> but it don't boots (There are no even BIOS splash/message)
> 
> I should remove battery and wait ~5 seconds...
> 
> v2.6.26 was non-working here, but as far as I remember, there was no such
> problem with 2.6.25.  It's very difficult to reproduce it (this is just
> second case for ~2-3 weeks).  So bisecting is impossible.
> 
> Any ideas? Should I fill a bugreport?
> 
> dmesg when this happens is available:
> 	http://inhex.net/dion/lkml/dmesg_2.6.27.txt
>