From: Jarkko Lavinen <jlavi@iki.fi>
To: linux-kernel@vger.kernel.org
Subject: i82875p_edac: BAR 0 collision
Date: Fri, 7 Nov 2008 13:43:55 +0200 [thread overview]
Message-ID: <20081107114355.GA31730@piipiip.net> (raw)
When I try to load i82875p_edac module on ASUS P4C800 Deluxe in 2.6.26
or 2.6.27 it fails due to BAR 0 collision. On 2.6.25 the
i82875p_edac works just fine.
Should i82875p_setup_overfl_dev() do some additional work to fix the
missing resource of the hidden overflow device?
When I try load i82875p_edac module on 2.6.27 I get
# modprobe i82875p_edac
FATAL: Error inserting i82875p_edac
(/lib/modules/2.6.27.4/kernel/drivers/edac/i82875p_edac.ko): No such device
And dmesg shows (from 2.6.27.4):
EDAC MC: Ver: 2.1.0 Oct 30 2008
EDAC DEBUG: edac_pci_dev_parity_clear()
...
EDAC DEBUG: edac_pci_dev_parity_clear()
EDAC DEBUG: edac_sysfs_setup_mc_kset()
EDAC DEBUG: edac_sysfs_setup_mc_kset() Registered '.../edac/mc' kobject
EDAC DEBUG: i82875p_init_one()
EDAC i82875p: i82875p init one
EDAC DEBUG: i82875p_probe1()
PCI: 0000:00:06.0 reg 10 32bit mmio: [fecf0000, fecf0fff]
pci 0000:00:06.0: device not available because of BAR 0 [0xfecf0000-0xfecf0fff] collisions
EDAC i82875p: i82875p_setup_overfl_dev(): Failed to enable overflow device
EDAC DEBUG: 875p init fail
On 2.6.25.19 loading i82875p_edac works just fine and dmesg shows:
EDAC MC: Ver: 2.1.0 Nov 4 2008
EDAC i82875p: i82875p init one
EDAC MC0: Giving out device to 'i82875p_edac' 'i82875p': DEV 0000:00:00.0
EDAC PCI0: Giving out device to module 'i82875p_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)
Cheers
Jarkko Lavinen
next reply other threads:[~2008-11-07 12:30 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-07 11:43 Jarkko Lavinen [this message]
2008-11-11 8:01 ` i82875p_edac: BAR 0 collision Andrew Morton
2008-11-12 21:06 ` Jarkko Lavinen
2008-11-18 21:57 ` Jarkko Lavinen
2008-11-23 20:44 ` Jarkko Lavinen
2008-12-16 19:39 ` Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081107114355.GA31730@piipiip.net \
--to=jlavi@iki.fi \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox