From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
Atsushi Nemoto <anemo@mba.ocn.ne.jp>,
Sergei Shtylyov <sshtylyov@ru.mvista.com>
Subject: [PATCH 1/6] tx493x: fix intendation
Date: Wed, 12 Nov 2008 22:14:12 +0100 [thread overview]
Message-ID: <200811122214.13396.bzolnier@gmail.com> (raw)
Trivial CodingStyle fixup for tx4938ide and tx4939ide drivers.
CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/tx4938ide.c | 10 +++++-----
drivers/ide/tx4939ide.c | 42 +++++++++++++++++++++---------------------
2 files changed, 26 insertions(+), 26 deletions(-)
Index: b/drivers/ide/tx4938ide.c
===================================================================
--- a/drivers/ide/tx4938ide.c
+++ b/drivers/ide/tx4938ide.c
@@ -216,16 +216,16 @@ static const struct ide_tp_ops tx4938ide
#endif /* __BIG_ENDIAN */
static const struct ide_port_ops tx4938ide_port_ops = {
- .set_pio_mode = tx4938ide_set_pio_mode,
+ .set_pio_mode = tx4938ide_set_pio_mode,
};
static const struct ide_port_info tx4938ide_port_info __initdata = {
- .port_ops = &tx4938ide_port_ops,
+ .port_ops = &tx4938ide_port_ops,
#ifdef __BIG_ENDIAN
- .tp_ops = &tx4938ide_tp_ops,
+ .tp_ops = &tx4938ide_tp_ops,
#endif
- .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
- .pio_mask = ATA_PIO5,
+ .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
+ .pio_mask = ATA_PIO5,
};
static int __init tx4938ide_probe(struct platform_device *pdev)
Index: b/drivers/ide/tx4939ide.c
===================================================================
--- a/drivers/ide/tx4939ide.c
+++ b/drivers/ide/tx4939ide.c
@@ -617,33 +617,33 @@ static const struct ide_tp_ops tx4939ide
#endif /* __LITTLE_ENDIAN */
static const struct ide_port_ops tx4939ide_port_ops = {
- .set_pio_mode = tx4939ide_set_pio_mode,
- .set_dma_mode = tx4939ide_set_dma_mode,
- .clear_irq = tx4939ide_clear_irq,
- .cable_detect = tx4939ide_cable_detect,
+ .set_pio_mode = tx4939ide_set_pio_mode,
+ .set_dma_mode = tx4939ide_set_dma_mode,
+ .clear_irq = tx4939ide_clear_irq,
+ .cable_detect = tx4939ide_cable_detect,
};
static const struct ide_dma_ops tx4939ide_dma_ops = {
- .dma_host_set = tx4939ide_dma_host_set,
- .dma_setup = tx4939ide_dma_setup,
- .dma_exec_cmd = ide_dma_exec_cmd,
- .dma_start = ide_dma_start,
- .dma_end = tx4939ide_dma_end,
- .dma_test_irq = tx4939ide_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timeout = ide_dma_timeout,
+ .dma_host_set = tx4939ide_dma_host_set,
+ .dma_setup = tx4939ide_dma_setup,
+ .dma_exec_cmd = ide_dma_exec_cmd,
+ .dma_start = ide_dma_start,
+ .dma_end = tx4939ide_dma_end,
+ .dma_test_irq = tx4939ide_dma_test_irq,
+ .dma_lost_irq = ide_dma_lost_irq,
+ .dma_timeout = ide_dma_timeout,
};
static const struct ide_port_info tx4939ide_port_info __initdata = {
- .init_hwif = tx4939ide_init_hwif,
- .init_dma = tx4939ide_init_dma,
- .port_ops = &tx4939ide_port_ops,
- .dma_ops = &tx4939ide_dma_ops,
- .tp_ops = &tx4939ide_tp_ops,
- .host_flags = IDE_HFLAG_MMIO,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
+ .init_hwif = tx4939ide_init_hwif,
+ .init_dma = tx4939ide_init_dma,
+ .port_ops = &tx4939ide_port_ops,
+ .dma_ops = &tx4939ide_dma_ops,
+ .tp_ops = &tx4939ide_tp_ops,
+ .host_flags = IDE_HFLAG_MMIO,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA5,
};
static int __init tx4939ide_probe(struct platform_device *pdev)
next reply other threads:[~2008-11-12 21:33 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-12 21:14 Bartlomiej Zolnierkiewicz [this message]
2008-11-12 22:48 ` [PATCH 1/6] tx493x: fix intendation Sergei Shtylyov
2008-11-13 12:52 ` Atsushi Nemoto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200811122214.13396.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=anemo@mba.ocn.ne.jp \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sshtylyov@ru.mvista.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox