From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753923AbYLGJVc (ORCPT ); Sun, 7 Dec 2008 04:21:32 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752957AbYLGJVX (ORCPT ); Sun, 7 Dec 2008 04:21:23 -0500 Received: from 8bytes.org ([88.198.83.132]:49578 "EHLO 8bytes.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752342AbYLGJVP convert rfc822-to-8bit (ORCPT ); Sun, 7 Dec 2008 04:21:15 -0500 Date: Sun, 7 Dec 2008 10:21:12 +0100 From: Joerg Roedel To: Meelis Roos Cc: Linux Kernel list , bzolnier@gmail.com, petkovbb@gmail.com Subject: Re: WARNING: at arch/x86/kernel/pci-nommu.c:62 nommu_map_sg+0x29/0x9e() Message-ID: <20081207092111.GD24323@8bytes.org> References: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: 8BIT In-Reply-To: User-Agent: Mutt/1.5.13 (2006-08-11) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The IDE core is calling map_sg with invalid parameters. CC'ing the IDE maintainers. On Fri, Dec 05, 2008 at 09:58:36AM +0200, Meelis Roos wrote: > Got this warning on yesterdays 2.6.28-rc7-00105-gfeaf384 with ide-cd and > ali ide driver (full warning at the end of dmesg). > > BIOS EBDA/lowmem at: 0009fc00/0009fc00 > Linux version 2.6.28-rc7-00105-gfeaf384 (mroos@vaarikas) (gcc version 4.3.2 (Debian 4.3.2-1) ) #237 PREEMPT Thu Dec 4 09:05:24 EET 2008 > KERNEL supported cpus: > Intel GenuineIntel > AMD AuthenticAMD > NSC Geode by NSC > Cyrix CyrixInstead > Centaur CentaurHauls > Transmeta GenuineTMx86 > Transmeta TransmetaCPU > UMC UMC UMC UMC > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable) > BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data) > BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS) > BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) > BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) > DMI 2.3 present. > AMI BIOS detected: BIOS may corrupt low RAM, working it around. > last_pfn = 0x7ffb0 max_arch_pfn = 0x100000 > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > kernel direct mapping tables up to 377fe000 @ 10000-16000 > ACPI: RSDP 000F9BE0, 0014 (r0 ACPIAM) > ACPI: RSDT 7FFB0000, 0030 (r1 A M I OEMRSDT 1000627 MSFT 97) > ACPI: FACP 7FFB0200, 0084 (r2 A M I OEMFACP 1000627 MSFT 97) > ACPI: DSDT 7FFB0400, 45A7 (r1 939M2 939M2160 160 INTL 2002026) > ACPI: FACS 7FFC0000, 0040 > ACPI: APIC 7FFB0390, 0068 (r1 A M I OEMAPIC 1000627 MSFT 97) > ACPI: OEMB 7FFC0040, 0056 (r1 A M I AMI_OEM 1000627 MSFT 97) > ACPI: Local APIC address 0xfee00000 > 1159MB HIGHMEM available. > 887MB LOWMEM available. > mapped low ram: 0 - 377fe000 > low ram: 00000000 - 377fe000 > bootmap 00012000 - 00018f00 > (6 early reservations) ==> bootmem [0000000000 - 00377fe000] > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] > #1 [0000100000 - 00004c6b00] TEXT DATA BSS ==> [0000100000 - 00004c6b00] > #2 [00004c7000 - 00004ca000] INIT_PG_TABLE ==> [00004c7000 - 00004ca000] > #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] > #4 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] > #5 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] > found SMP MP-table at [c00ff780] 000ff780 > Zone PFN ranges: > DMA 0x00000010 -> 0x00001000 > Normal 0x00001000 -> 0x000377fe > HighMem 0x000377fe -> 0x0007ffb0 > Movable zone start PFN for each node > early_node_map[2] active PFN ranges > 0: 0x00000010 -> 0x0000009f > 0: 0x00000100 -> 0x0007ffb0 > On node 0 totalpages: 524095 > DMA zone: 32 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 3951 pages, LIFO batch:0 > Normal zone: 1744 pages used for memmap > Normal zone: 221486 pages, LIFO batch:31 > HighMem zone: 2320 pages used for memmap > HighMem zone: 294562 pages, LIFO batch:31 > Movable zone: 0 pages used for memmap > ACPI: PM-Timer IO Port: 0x808 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) > ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 > ACPI: IOAPIC (id[0x02] address[0xfec10000] gsi_base[24]) > IOAPIC[1]: apic_id 2, version 17, address 0xfec10000, GSI 24-39 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Enabling APIC mode: Flat. Using 2 I/O APICs > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at 88000000 (gap: 80000000:7f7c0000) > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519999 > Kernel command line: root=/dev/sda1 ro > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > CPU 0 irqstacks, hard=c0474000 soft=c0473000 > PID hash table entries: 4096 (order: 12, 16384 bytes) > Fast TSC calibration using PIT > Detected 1800.103 MHz processor. > Console: colour VGA+ 80x25 > console [tty0] enabled > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Memory: 2074364k/2096832k available (2045k kernel code, 21164k reserved, 1219k data, 248k init, 1187528k highmem) > virtual kernel memory layout: > fixmap : 0xfffac000 - 0xfffff000 ( 332 kB) > pkmap : 0xff800000 - 0xffc00000 (4096 kB) > vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) > lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) > .init : 0xc0432000 - 0xc0470000 ( 248 kB) > .data : 0xc02ff77b - 0xc0430638 (1219 kB) > .text : 0xc0100000 - 0xc02ff77b (2045 kB) > Checking if this processor honours the WP bit even in supervisor mode...Ok. > Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.20 BogoMIPS (lpj=7200412) > Mount-cache hash table entries: 512 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 02 > Checking 'hlt' instruction... OK. > Freeing SMP alternatives: 0k freed > ACPI: Core revision 20080926 > ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > net_namespace: 760 bytes > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 > PCI: Using configuration type 1 for base access > ACPI: EC: Look up EC in DSDT > ACPI: Interpreter enabled > ACPI: (supports S0 S5) > ACPI: Using IOAPIC for interrupt routing > ACPI: No dock devices found. > ACPI: PCI Root Bridge [PCI0] (0000:00) > pci 0000:00:01.0: PME# supported from D0 D3hot D3cold > pci 0000:00:01.0: PME# disabled > pci 0000:00:02.0: PME# supported from D0 D3hot D3cold > pci 0000:00:02.0: PME# disabled > pci 0000:00:03.0: PME# supported from D0 D3hot D3cold > pci 0000:00:03.0: PME# disabled > pci 0000:00:04.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff] > pci 0000:00:07.1: quirk: region 0800-083f claimed by ali7101 ACPI > pci 0000:00:08.0: reg 10 io port: [0xe800-0xe8ff] > pci 0000:00:08.0: reg 14 32bit mmio: [0xfebff000-0xfebfffff] > pci 0000:00:08.0: supports D1 D2 > pci 0000:00:08.0: PME# supported from D2 D3hot D3cold > pci 0000:00:08.0: PME# disabled > pci 0000:00:11.0: reg 10 io port: [0xe400-0xe4ff] > pci 0000:00:11.0: reg 14 32bit mmio: [0xfebfec00-0xfebfecff] > pci 0000:00:11.0: PME# supported from D3hot D3cold > pci 0000:00:11.0: PME# disabled > pci 0000:00:12.0: reg 10 io port: [0x1f0-0x1ff] > pci 0000:00:12.0: reg 14 io port: [0x3f4-0x3f7] > pci 0000:00:12.0: reg 18 io port: [0x170-0x17f] > pci 0000:00:12.0: reg 1c io port: [0x374-0x377] > pci 0000:00:12.0: reg 20 io port: [0xff00-0xff0f] > pci 0000:00:13.0: reg 10 32bit mmio: [0xfebfd000-0xfebfdfff] > pci 0000:00:13.1: reg 10 32bit mmio: [0xfebfc000-0xfebfcfff] > pci 0000:00:13.2: reg 10 32bit mmio: [0xfebfb000-0xfebfbfff] > pci 0000:00:13.3: reg 10 32bit mmio: [0xfebfe800-0xfebfe8ff] > pci 0000:00:13.3: PME# supported from D0 D3hot D3cold > pci 0000:00:13.3: PME# disabled > pci 0000:00:01.0: bridge 32bit mmio: [0xfd600000-0xfd6fffff] > pci 0000:00:02.0: bridge 32bit mmio: [0xfd700000-0xfd7fffff] > pci 0000:03:00.0: reg 10 io port: [0xcc00-0xcc07] > pci 0000:03:00.0: reg 14 io port: [0xc880-0xc883] > pci 0000:03:00.0: reg 18 io port: [0xc800-0xc807] > pci 0000:03:00.0: reg 1c io port: [0xc480-0xc483] > pci 0000:03:00.0: reg 20 io port: [0xc400-0xc40f] > pci 0000:03:00.0: reg 24 32bit mmio: [0xfd8fe000-0xfd8fffff] > pci 0000:03:00.0: PME# supported from D3hot > pci 0000:03:00.0: PME# disabled > pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' > pci 0000:00:03.0: bridge io port: [0xc000-0xcfff] > pci 0000:00:03.0: bridge 32bit mmio: [0xfd800000-0xfd8fffff] > pci 0000:04:00.0: reg 10 32bit mmio: [0xbc000000-0xbdffffff] > pci 0000:04:00.0: reg 14 32bit mmio: [0xfe9fc000-0xfe9fffff] > pci 0000:04:00.0: reg 18 32bit mmio: [0xfe000000-0xfe7fffff] > pci 0000:04:00.0: reg 30 32bit mmio: [0xfe9e0000-0xfe9effff] > pci 0000:00:05.0: bridge 32bit mmio: [0xfd900000-0xfe9fffff] > pci 0000:00:05.0: bridge 32bit mmio pref: [0xbbe00000-0xbfdfffff] > pci 0000:05:05.0: reg 10 io port: [0xd800-0xd8ff] > pci 0000:05:05.0: reg 14 32bit mmio: [0xfeaffc00-0xfeaffcff] > pci 0000:05:05.0: supports D1 D2 > pci 0000:05:05.0: PME# supported from D1 D2 D3hot D3cold > pci 0000:05:05.0: PME# disabled > pci 0000:05:06.0: reg 10 io port: [0xd400-0xd4ff] > pci 0000:05:06.0: reg 14 32bit mmio: [0xfeaff800-0xfeaff8ff] > pci 0000:05:06.0: supports D1 D2 > pci 0000:05:06.0: PME# supported from D1 D2 D3hot > pci 0000:05:06.0: PME# disabled > pci 0000:05:07.0: reg 10 32bit mmio: [0xbfeff000-0xbfefffff] > pci 0000:05:07.1: reg 10 32bit mmio: [0xbfefe000-0xbfefefff] > pci 0000:00:06.0: transparent bridge > pci 0000:00:06.0: bridge io port: [0xd000-0xdfff] > pci 0000:00:06.0: bridge 32bit mmio: [0xfea00000-0xfeafffff] > pci 0000:00:06.0: bridge 32bit mmio pref: [0xbfe00000-0xbfefffff] > bus 00 -> node 0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HTT_._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB1._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB2._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB3._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 > ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 7 *10 11 12 14 15) > ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 87, should be 57 [20080926] > SCSI subsystem initialized > libata version 3.00 loaded. > PCI: Using ACPI for IRQ routing > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp: PnP ACPI: found 15 devices > ACPI: ACPI bus type pnp unregistered > system 00:0a: ioport range 0x480-0x48f has been reserved > system 00:0a: ioport range 0x4d0-0x4d1 has been reserved > system 00:0a: ioport range 0x800-0x87f could not be reserved > system 00:0a: ioport range 0x400-0x40f has been reserved > system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved > system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved > system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved > system 00:0b: iomem range 0xfec10000-0xfec10fff has been reserved > system 00:0b: iomem range 0xffb80000-0xffffffff has been reserved > system 00:0d: ioport range 0x290-0x29f has been reserved > system 00:0e: iomem range 0x0-0x9ffff could not be reserved > system 00:0e: iomem range 0xc0000-0xcffff could not be reserved > system 00:0e: iomem range 0xe0000-0xfffff could not be reserved > system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved > pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 > pci 0000:00:01.0: IO window: disabled > pci 0000:00:01.0: MEM window: 0xfd600000-0xfd6fffff > pci 0000:00:01.0: PREFETCH window: disabled > pci 0000:00:02.0: PCI bridge, secondary bus 0000:02 > pci 0000:00:02.0: IO window: disabled > pci 0000:00:02.0: MEM window: 0xfd700000-0xfd7fffff > pci 0000:00:02.0: PREFETCH window: disabled > pci 0000:00:03.0: PCI bridge, secondary bus 0000:03 > pci 0000:00:03.0: IO window: 0xc000-0xcfff > pci 0000:00:03.0: MEM window: 0xfd800000-0xfd8fffff > pci 0000:00:03.0: PREFETCH window: disabled > pci 0000:00:05.0: PCI bridge, secondary bus 0000:04 > pci 0000:00:05.0: IO window: disabled > pci 0000:00:05.0: MEM window: 0xfd900000-0xfe9fffff > pci 0000:00:05.0: PREFETCH window: 0x000000bbe00000-0x000000bfdfffff > pci 0000:00:06.0: PCI bridge, secondary bus 0000:05 > pci 0000:00:06.0: IO window: 0xd000-0xdfff > pci 0000:00:06.0: MEM window: 0xfea00000-0xfeafffff > pci 0000:00:06.0: PREFETCH window: 0x000000bfe00000-0x000000bfefffff > pci 0000:00:01.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29 > pci 0000:00:01.0: setting latency timer to 64 > pci 0000:00:02.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34 > pci 0000:00:02.0: setting latency timer to 64 > pci 0000:00:03.0: PCI INT A -> GSI 39 (level, low) -> IRQ 39 > pci 0000:00:03.0: setting latency timer to 64 > pci 0000:00:05.0: setting latency timer to 64 > pci 0000:00:06.0: setting latency timer to 64 > bus: 00 index 0 io port: [0x00-0xffff] > bus: 00 index 1 mmio: [0x000000-0xffffffff] > bus: 01 index 0 mmio: [0x0-0x0] > bus: 01 index 1 mmio: [0xfd600000-0xfd6fffff] > bus: 01 index 2 mmio: [0x0-0x0] > bus: 01 index 3 mmio: [0x0-0x0] > bus: 02 index 0 mmio: [0x0-0x0] > bus: 02 index 1 mmio: [0xfd700000-0xfd7fffff] > bus: 02 index 2 mmio: [0x0-0x0] > bus: 02 index 3 mmio: [0x0-0x0] > bus: 03 index 0 io port: [0xc000-0xcfff] > bus: 03 index 1 mmio: [0xfd800000-0xfd8fffff] > bus: 03 index 2 mmio: [0x0-0x0] > bus: 03 index 3 mmio: [0x0-0x0] > bus: 04 index 0 mmio: [0x0-0x0] > bus: 04 index 1 mmio: [0xfd900000-0xfe9fffff] > bus: 04 index 2 mmio: [0xbbe00000-0xbfdfffff] > bus: 04 index 3 mmio: [0x0-0x0] > bus: 05 index 0 io port: [0xd000-0xdfff] > bus: 05 index 1 mmio: [0xfea00000-0xfeafffff] > bus: 05 index 2 mmio: [0xbfe00000-0xbfefffff] > bus: 05 index 3 io port: [0x00-0xffff] > bus: 05 index 4 mmio: [0x000000-0xffffffff] > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > TCP established hash table entries: 131072 (order: 8, 1048576 bytes) > TCP bind hash table entries: 65536 (order: 6, 262144 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > NET: Registered protocol family 1 > Machine check exception polling timer started. > highmem bounce pool size: 64 pages > HugeTLB registered 4 MB page size, pre-allocated 0 pages > msgmni has been set to 1733 > alg: No test for stdrng (krng) > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > pci 0000:00:00.0: Enabling HT MSI Mapping > pci 0000:00:01.0: Enabling HT MSI Mapping > pci 0000:00:02.0: Enabling HT MSI Mapping > pci 0000:00:03.0: Enabling HT MSI Mapping > pci 0000:04:00.0: Boot video device > pcieport-driver 0000:00:01.0: setting latency timer to 64 > pcieport-driver 0000:00:01.0: found MSI capability > pcieport-driver 0000:00:01.0: irq 287 for MSI/MSI-X > pci_express 0000:00:01.0:pcie00: allocate port service > pcieport-driver 0000:00:02.0: setting latency timer to 64 > pcieport-driver 0000:00:02.0: found MSI capability > pcieport-driver 0000:00:02.0: irq 286 for MSI/MSI-X > pci_express 0000:00:02.0:pcie00: allocate port service > pcieport-driver 0000:00:03.0: setting latency timer to 64 > pcieport-driver 0000:00:03.0: found MSI capability > pcieport-driver 0000:00:03.0: irq 285 for MSI/MSI-X > pci_express 0000:00:03.0:pcie00: allocate port service > input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 > ACPI: Power Button (FF) [PWRF] > input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 > ACPI: Power Button (CM) [PWRB] > processor ACPI_CPU:00: registered as cooling_device0 > Non-volatile memory driver v1.2 > Linux agpgart interface v0.103 > agpgart-amd64 0000:00:04.0: AGP bridge [10b9/1689] > agpgart-amd64 0000:00:04.0: setting up ULi AGP > agpgart-amd64 0000:00:04.0: AGP aperture is 256M @ 0xd0000000 > [drm] Initialized drm 1.1.0 20060810 > Serial: 8250/16550 driver4 ports, IRQ sharing enabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > Floppy drive(s): fd0 is 1.44M > FDC 0 is a post-1991 82077 > Fixed MDIO Bus: probed > PPP generic driver version 2.4.2 > Driver 'sd' needs updating - please use bus_type methods > ahci 0000:03:00.0: version 3.0 > ahci 0000:03:00.0: PCI INT A -> GSI 35 (level, low) -> IRQ 35 > ahci 0000:03:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode > ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part > ahci 0000:03:00.0: setting latency timer to 64 > scsi0 : ahci > ata1: SATA max UDMA/133 abar m8192@0xfd8fe000 port 0xfd8fe100 irq 35 > Switched to high resolution mode on CPU 0 > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata1.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133 > ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) > ata1.00: configured for UDMA/133 > scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 > sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sda: sda1 sda2 sda3 > sd 0:0:0:0: [sda] Attached SCSI disk > PNP: No PS/2 controller found. Probing ports directly. > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > cpuidle: using governor ladder > cpuidle: using governor menu > TCP cubic registered > NET: Registered protocol family 17 > Using IPI Shortcut mode > registered taskstats version 1 > EXT3-fs: mounted filesystem with ordered data mode. > VFS: Mounted root (ext3 filesystem) readonly. > Freeing unused kernel memory: 248k freed > Write protecting the kernel text: 2048k > Write protecting the kernel read-only data: 1020k > kjournald starting. Commit interval 5 seconds > parport_pc 00:07: reported by Plug and Play ACPI > parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > ali1563_smbus 0000:00:07.0: Found ALi1563 SMBus at 0x0400 > usbcore: registered new device driver usb > uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) > uli526x 0000:00:11.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > eth0: ULi M5263 at pci0000:00:11.0, 00:13:8f:98:2c:bd, irq 17. > 8139too Fast Ethernet driver 0.9.28 > 8139too 0000:05:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > eth1: RealTek RTL8139 at 0xf8112c00, 00:40:95:30:0b:b0, IRQ 20 > eth1: Identified 8139 chip type 'RTL-8139C' > 8139too 0000:05:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 > eth2: RealTek RTL8139 at 0xf801e800, 00:c0:df:04:7f:9b, IRQ 21 > eth2: Identified 8139 chip type 'RTL-8139B' > Uniform Multi-Platform E-IDE driver > isp1760 0000:00:07.1: enabling device (0000 -> 0001) > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > ohci_hcd 0000:00:13.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > ohci_hcd 0000:00:13.0: OHCI Host Controller > ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 > ohci_hcd 0000:00:13.0: irq 20, io mem 0xfebfd000 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 3 ports detected > usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb1: Product: OHCI Host Controller > usb usb1: Manufacturer: Linux 2.6.28-rc7-00105-gfeaf384 ohci_hcd > usb usb1: SerialNumber: 0000:00:13.0 > ohci_hcd 0000:00:13.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > ohci_hcd 0000:00:13.1: OHCI Host Controller > ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 > ohci_hcd 0000:00:13.1: irq 21, io mem 0xfebfc000 > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 3 ports detected > usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb2: Product: OHCI Host Controller > usb usb2: Manufacturer: Linux 2.6.28-rc7-00105-gfeaf384 ohci_hcd > usb usb2: SerialNumber: 0000:00:13.1 > ali15x3_smbus 0000:00:07.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr > ali15x3_smbus 0000:00:07.1: ALI15X3 not detected, module not inserted. > alim15x3 0000:00:12.0: IDE controller (0x10b9:0x5229 rev 0xc7) > ALI15x3_IDE 0000:00:12.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > alim15x3 0000:00:12.0: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xff00-0xff07 > ide1: BM-DMA at 0xff08-0xff0f > Probing IDE interface ide0... > input: PC Speaker as /devices/platform/pcspkr/input/input2 > Linux video capture interface: v2.00 > Bt87x 0000:05:07.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > bt87x0: Using board 1, analog, digital (rate 32000 Hz) > hda: SAMSUNG SP1614N, ATA DISK drive > usb 1-1: new full speed USB device using ohci_hcd and address 2 > bttv: driver version 0.9.17 loaded > bttv: using 8 buffers with 2080k (520 pages) each for capture > bttv: Bt8xx card found (0). > bttv 0000:05:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > bttv0: Bt878 (rev 2) at 0000:05:07.0, irq: 22, latency: 32, mmio: 0xbfeff000 > bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb > bttv0: using: Hauppauge (bt878) [card=10,autodetected] > bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init] > bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] > tveeprom 1-0050: Hauppauge model 37284, rev B121, serial# 3520921 > tveeprom 1-0050: tuner model is Philips FM1216 (idx 21, type 5) > rtc_cmos 00:02: RTC can wake from S4 > rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one month, 114 bytes nvram > tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04) > tveeprom 1-0050: audio processor is MSP3410D (idx 5) > tveeprom 1-0050: has radio > bttv0: Hauppauge eeprom indicates model#37284 > bttv0: tuner type=5 > bttv0: i2c: checking for MSP34xx @ 0x80... found > msp3400' 1-0040: MSP3410D-B4 found @ 0x80 (bt878 #0 [sw]) > msp3400' 1-0040: msp3400 supports nicam, mode is autodetect > usb 1-1: configuration #1 chosen from 1 choice > bttv0: i2c: checking for TDA9875 @ 0xb0... not found > bttv0: i2c: checking for TDA7432 @ 0x8a... not found > usb 1-1: New USB device found, idVendor=076b, idProduct=1021 > usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 1-1: Product: Smart Card Reader USB > usb 1-1: Manufacturer: OMNIKEY > gameport: NS558 PnP Gameport is pnp00:08/gameport0, io 0x200, speed 727kHz > tuner' 1-0042: chip found @ 0x84 (bt878 #0 [sw]) > tda9887 1-0042: creating new instance > tda9887 1-0042: tda988[5/6/7] found > tuner' 1-0061: chip found @ 0xc2 (bt878 #0 [sw]) > tuner-simple 1-0061: creating new instance > tuner-simple 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) > bttv0: registered device video0 > bttv0: registered device vbi0 > bttv0: registered device radio0 > usb 1-2: new full speed USB device using ohci_hcd and address 3 > bttv0: PLL: 28636363 => 35468950 .. ok > udev: renamed network interface eth1 to eth0 > udev: renamed network interface eth2 to eth1 > usb 1-2: configuration #1 chosen from 1 choice > udev: renamed network interface eth0_rename to eth2 > usb 1-2: New USB device found, idVendor=03f0, idProduct=7204 > usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > usb 1-2: Product: deskjet 3600 > usb 1-2: Manufacturer: hp > usb 1-2: SerialNumber: HU3AE1N3N96B > hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 > hda: UDMA/100 mode selected > Probing IDE interface ide1... > usb 2-2: new full speed USB device using ohci_hcd and address 2 > usb 2-2: configuration #1 chosen from 1 choice > hub 2-2:1.0: USB hub found > hub 2-2:1.0: 4 ports detected > usb 2-2: New USB device found, idVendor=0451, idProduct=2046 > usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > usb 2-2.1: new low speed USB device using ohci_hcd and address 3 > hdc: _NEC DVD_RW ND-4571A, ATAPI CD/DVD-ROM drive > usb 2-2.1: configuration #1 chosen from 1 choice > usb 2-2.1: New USB device found, idVendor=046d, idProduct=c30e > usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 2-2.1: Product: HID compliant keyboard > usb 2-2.1: Manufacturer: Logitech > usb 2-2.2: new low speed USB device using ohci_hcd and address 4 > usb 2-2.2: configuration #1 chosen from 1 choice > usb 2-2.2: New USB device found, idVendor=046d, idProduct=c00c > usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 2-2.2: Product: USB Mouse > usb 2-2.2: Manufacturer: Logitech > usb 2-2.3: new low speed USB device using ohci_hcd and address 5 > usb 2-2.3: configuration #1 chosen from 1 choice > usb 2-2.3: New USB device found, idVendor=06f2, idProduct=0011 > usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 2-2.3: Product: USB KVM Switch > usb 2-2.3: Manufacturer: Justcom Technology > hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 > hdc: UDMA/33 mode selected > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > ehci_hcd 0000:00:13.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 > ehci_hcd 0000:00:13.3: EHCI Host Controller > ehci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 3 > ehci_hcd 0000:00:13.3: debug port 1 > ehci_hcd 0000:00:13.3: irq 23, io mem 0xfebfe800 > usb 1-1: USB disconnect, address 2 > ehci_hcd 0000:00:13.3: USB 2.0 started, EHCI 1.00 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 8 ports detected > usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb3: Product: EHCI Host Controller > usb usb3: Manufacturer: Linux 2.6.28-rc7-00105-gfeaf384 ehci_hcd > usb usb3: SerialNumber: 0000:00:13.3 > ohci_hcd 0000:00:13.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 > ohci_hcd 0000:00:13.2: OHCI Host Controller > ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 > ohci_hcd 0000:00:13.2: irq 22, io mem 0xfebfb000 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 3 ports detected > usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb4: Product: OHCI Host Controller > usb usb4: Manufacturer: Linux 2.6.28-rc7-00105-gfeaf384 ohci_hcd > usb usb4: SerialNumber: 0000:00:13.2 > ali1535_smbus 0000:00:07.1: ALI1535_smb region uninitialized - upgrade BIOS? > ali1535_smbus 0000:00:07.1: ALI1535 not detected, module not inserted. > Intel ICH 0000:00:08.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > usb 1-2: USB disconnect, address 3 > usb 2-2: USB disconnect, address 2 > usb 2-2.1: USB disconnect, address 3 > usb 2-2.2: USB disconnect, address 4 > usb 2-2.3: USB disconnect, address 5 > usbcore: registered new interface driver usblp > usbcore: registered new interface driver hiddev > usbcore: registered new interface driver usbhid > usbhid: v2.6:USB HID core driver > usb 1-1: new full speed USB device using ohci_hcd and address 4 > AC'97 1 does not respond - RESET > AC'97 1 access is not valid [0xffffffff], removing mixer. > Unable to initialize codec #1 > intel8x0_measure_ac97_clock: measured 54710 usecs > intel8x0: clocking to 48000 > ide-gd driver 1.18 > hda: max request size: 512KiB > hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63 > hda: cache flushes supported > hda: hda1 > usb 1-1: configuration #1 chosen from 1 choice > usb 1-1: New USB device found, idVendor=076b, idProduct=1021 > usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 1-1: Product: Smart Card Reader USB > usb 1-1: Manufacturer: OMNIKEY > ide-cd driver 5.00 > ide-cd: hdc: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache > Uniform CD-ROM driver Revision: 3.20 > usb 1-2: new full speed USB device using ohci_hcd and address 5 > usb 1-2: configuration #1 chosen from 1 choice > usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7204 > usb 1-2: New USB device found, idVendor=03f0, idProduct=7204 > usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > usb 1-2: Product: deskjet 3600 > usb 1-2: Manufacturer: hp > usb 1-2: SerialNumber: HU3AE1N3N96B > Adding 3911816k swap on /dev/sda2. Priority:-1 extents:1 across:3911816k > usb 2-2: new full speed USB device using ohci_hcd and address 6 > usb 2-2: configuration #1 chosen from 1 choice > hub 2-2:1.0: USB hub found > hub 2-2:1.0: 4 ports detected > usb 2-2: New USB device found, idVendor=0451, idProduct=2046 > usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > usb 2-2.1: new low speed USB device using ohci_hcd and address 7 > usb 2-2.1: configuration #1 chosen from 1 choice > input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:13.1/usb2/2-2/2-2.1/2-2.1:1.0/input/input3 > generic-usb 0003:046D:C30E.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:13.1-2.1/input0 > input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:13.1/usb2/2-2/2-2.1/2-2.1:1.1/input/input4 > generic-usb 0003:046D:C30E.0002: input,hidraw1: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:13.1-2.1/input1 > usb 2-2.1: New USB device found, idVendor=046d, idProduct=c30e > usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 2-2.1: Product: HID compliant keyboard > usb 2-2.1: Manufacturer: Logitech > usb 2-2.2: new low speed USB device using ohci_hcd and address 8 > usb 2-2.2: configuration #1 chosen from 1 choice > input: Logitech USB Mouse as /devices/pci0000:00/0000:00:13.1/usb2/2-2/2-2.2/2-2.2:1.0/input/input5 > generic-usb 0003:046D:C00C.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:13.1-2.2/input0 > usb 2-2.2: New USB device found, idVendor=046d, idProduct=c00c > usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 2-2.2: Product: USB Mouse > usb 2-2.2: Manufacturer: Logitech > usb 2-2.3: new low speed USB device using ohci_hcd and address 9 > usb 2-2.3: configuration #1 chosen from 1 choice > input: Justcom Technology USB KVM Switch as /devices/pci0000:00/0000:00:13.1/usb2/2-2/2-2.3/2-2.3:1.0/input/input6 > generic-usb 0003:06F2:0011.0004: input,hidraw3: USB HID v1.10 Keyboard [Justcom Technology USB KVM Switch] on usb-0000:00:13.1-2.3/input0 > input: Justcom Technology USB KVM Switch as /devices/pci0000:00/0000:00:13.1/usb2/2-2/2-2.3/2-2.3:1.1/input/input7 > generic-usb 0003:06F2:0011.0005: input,hidraw4: USB HID v1.10 Mouse [Justcom Technology USB KVM Switch] on usb-0000:00:13.1-2.3/input1 > usb 2-2.3: New USB device found, idVendor=06f2, idProduct=0011 > usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 2-2.3: Product: USB KVM Switch > usb 2-2.3: Manufacturer: Justcom Technology > EXT3 FS on sda1, internal journal > w83627hf: Found W83627HF chip at 0x290 > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > device-mapper: uevent: version 1.0.3 > device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com > fuse init (API version 7.10) > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda3, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on hda1, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 > eth1: link up, 100Mbps, full-duplex, lpa 0x41E1 > IPv6 over IPv4 tunneling driver > sit0: Disabled Privacy Extensions > tun6to4: Disabled Privacy Extensions > u32 classifier > Actions configured > ADDRCONF(NETDEV_UP): eth2: link is not ready > powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (1 cpu cores) (version 2.20.00) > powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 > powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0xa > ip_tables: (C) 2000-2006 Netfilter Core Team > nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use > nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or > sysctl net.netfilter.nf_conntrack_acct=1 to enable it. > uli526x: eth2 NIC Link is Down > lp0: using parport0 (interrupt-driven). > ppdev: user-space parallel port driver > Marking TSC unstable due to cpufreq changes > Clocksource tsc unstable (delta = -222227837 ns) > Bluetooth: Core ver 2.13 > NET: Registered protocol family 31 > Bluetooth: HCI device and connection manager initialized > Bluetooth: HCI socket layer initialized > Bluetooth: L2CAP ver 2.11 > Bluetooth: L2CAP socket layer initialized > Bluetooth: RFCOMM socket layer initialized > Bluetooth: RFCOMM TTY layer initialized > Bluetooth: RFCOMM ver 1.10 > pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [drm] Initialized mga 3.2.1 20051102 on minor 0 > agpgart-amd64 0000:00:04.0: AGP 3.0 bridge > agpgart-amd64 0000:00:04.0: bridge is in legacy mode, falling back to 2.x > agpgart-amd64 0000:00:04.0: putting AGP V2 device into 4x mode > pci 0000:04:00.0: putting AGP V2 device into 4x mode > [drm] Initialized card for AGP DMA. > eth0: link down > eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 > ------------[ cut here ]------------ > WARNING: at arch/x86/kernel/pci-nommu.c:62 nommu_map_sg+0x29/0x9e() > Modules linked in: mga binfmt_misc rfcomm l2cap bluetooth ppdev lp xt_length xt_MARK iptable_mangle ipt_MASQUERADE iptable_nat nf_nat ipt_REJECT xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables powernow_k8 cpufreq_ondemand cpufreq_userspace cpufreq_powersave cls_fw cls_u32 sch_sfq sch_cbq sit tunnel4 fuse dm_crypt dm_mod ipv6 w83627hf hwmon_vid ide_cd_mod cdrom ide_gd_mod usbhid usblp pata_ali tuner_simple tuner_types tda9887 tda8290 tuner ns558 tvaudio gameport msp3400 rtc_cmos rtc_core rtc_lib snd_intel8x0 snd_ac97_codec ac97_bus bttv snd_bt87x videodev v4l1_compat pcspkr serio_raw ir_common k8temp hwmon snd_pcm snd_seq snd_timer snd_seq_device i2c_ali1535 compat_ioctl32 i2c_algo_bit ehci_hcd alim15x3 i2c_ali15x3 snd v4l2_common videobuf_dma_sg videobuf_core btcx_risc ohci_hcd ssb ide_pci_generic isp1760 soundcore tveeprom ide_core snd_page_alloc 8139too mii uli526x i2c_ali1563 usbcore i2c_core shpchp pci_hotplug parport_pc > parport ali_agp > Pid: 5298, comm: kcminit_startup Not tainted 2.6.28-rc7-00105-gfeaf384 #237 > Call Trace: > [] ? printk+0xf/0x12 > [] warn_on_slowpath+0x41/0x62 > [] ? default_wake_function+0xb/0xd > [] ? enqueue_entity+0x10b/0x113 > [] ? enqueue_task_fair+0x1c/0x5e > [] nommu_map_sg+0x29/0x9e > [] ide_build_sglist+0x48/0x50 [ide_core] > [] ide_build_dmatable+0x30/0x154 [ide_core] > [] ide_dma_setup+0x36/0xc7 [ide_core] > [] ali15x3_dma_setup+0x2f/0x35 [alim15x3] > [] ide_cd_do_request+0x5fa/0x671 [ide_cd_mod] > [] ? delay_tsc+0x1d/0x5f > [] ? cdrom_do_newpc_cont+0x0/0x18 [ide_cd_mod] > [] ? __const_udelay+0x18/0x1a > [] ? __ide_wait_stat+0x81/0xad [ide_core] > [] ? ide_wait_stat+0x3f/0x6e [ide_core] > [] ide_do_request+0x726/0x836 [ide_core] > [] ? cdrom_end_request+0x171/0x179 [ide_cd_mod] > [] ? cdrom_newpc_intr+0x5ef/0x5fd [ide_cd_mod] > [] ? ide_input_data+0x0/0xda [ide_core] > [] ide_intr+0x1b9/0x1f4 [ide_core] > [] ? cdrom_newpc_intr+0x0/0x5fd [ide_cd_mod] > [] handle_IRQ_event+0x21/0x48 > [] handle_edge_irq+0xc1/0x114 > [] ? handle_edge_irq+0x0/0x114 > [] ? common_interrupt+0x23/0x28 > ---[ end trace 18d5008b2820bb67 ]--- > eth0: link down > eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 > > -- > Meelis Roos (mroos@linux.ee)