From: Frans Pop <elendil@planet.nl>
To: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Robert Hancock <hancockr@shaw.ca>,
"Rafael J. Wysocki" <rjw@sisk.pl>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: [patch] ohci1394: don't leave interrupts enabled during suspend/resume
Date: Thu, 11 Dec 2008 17:02:57 +0100 [thread overview]
Message-ID: <200812111702.57999.elendil@planet.nl> (raw)
In-Reply-To: <494041F5.7000209@s5r6.in-berlin.de>
[-- Attachment #1: Type: text/plain, Size: 1205 bytes --]
On Wednesday 10 December 2008, Stefan Richter wrote:
> Then I have no other idea what to try.
OK and thanks for your efforts to help investigate this.
As the patch I originally submitted still does fix the issue for me, I
would personally be happy enough if that gets included.
> Whether the Ricoh R5C832 FireWire controller or another device issues
> the interrupt is IMO still not clear. If it was the FireWire
> controller, then it would be fundamentally broken.
> ohci1394_pci_suspend performs actually two register writes which both
> independently disable interrupts on the controller, and I have a hard
> time to believe that the controller gets both of these straight-forward
> things wrong.
I have tried one last thing: a suspend/resume with debugging enabled for
the driver. Attached the results of a 'dmesg | grep 1394' split for boot
up to suspend and for resume for easier comparison.
One possibly significant difference is that on boot there are two lines
"irq_handler: Bus reset requested" and "Cancel request received", which
are not there during resume. That's even though in both cases
ohci_initialize() is called which includes the trigger for the bus reset.
Significant?
[-- Attachment #2: 1394.boot --]
[-- Type: text/plain, Size: 3634 bytes --]
ohci1394 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: Remapped memory spaces reg 0xffffc2000007e000
ohci1394: fw-host0: Soft reset finished
ohci1394: fw-host0: Iso contexts reg: 000000a8 implemented: 0000000f
ohci1394: fw-host0: Iso contexts reg: 00000098 implemented: 0000000f
ohci1394: fw-host0: Receive DMA ctx=0 initialized
ohci1394: fw-host0: Receive DMA ctx=0 initialized
ohci1394: fw-host0: Transmit DMA ctx=0 initialized
ohci1394: fw-host0: Transmit DMA ctx=1 initialized
ohci1394: fw-host0: physUpperBoundOffset=00000000
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e0101000-e01017ff] Max Packet=[2048] IR/IT contexts=[4/4]
ieee1394: CSR: setting expire to 25, HZ=250
ohci1394: fw-host0: IntEvent: 00030010
ohci1394: fw-host0: irq_handler: Bus reset requested
ohci1394: fw-host0: Cancel request received
ohci1394: fw-host0: Got RQPkt interrupt status=0x00008409
ohci1394: fw-host0: SelfID interrupt received (phyid 0, root)
ohci1394: fw-host0: SelfID packet 0x807f8842 received
ieee1394: Including SelfID 0x42887f80
ohci1394: fw-host0: SelfID for this node is 0x807f8842
ohci1394: fw-host0: SelfID complete
ohci1394: fw-host0: PhyReqFilter=ffffffffffffffff
ieee1394: selfid_complete called with successful SelfID stage ... irm_id: 0xFFC0 node_id: 0xFFC0
ieee1394: NodeMgr: Processing reset for host 0
ohci1394: fw-host0: Single packet rcv'd
ohci1394: fw-host0: Got phy packet ctx=0 ... discarded
ieee1394: send packet at S100: 003c0000 ffc3ffff
ohci1394: fw-host0: Inserting packet for node 0-00:0000, tlabel=0, tcode=0x0, speed=0
ohci1394: fw-host0: Starting transmit DMA ctx=0
ieee1394: send packet local: ffc00140 ffc0ffff f0000400
ohci1394: fw-host0: IntEvent: 00000001
ieee1394: received packet: ffc00140 ffc0ffff f0000400
ohci1394: fw-host0: Got reqTxComplete interrupt status=0x00008011
ieee1394: send packet local: ffc00160 ffc00000 00000000 c8350404
ieee1394: received packet: ffc00160<6>ohci1394: fw-host0: Packet sent to node 60 tcode=0xE tLabel=0 ack=0x11 spd=0 data=0x00000000 ctx=0
ieee1394: send packet local: ffc00540 ffc0ffff f0000404
ieee1394: received packet: ffc00540 ffc0ffff f0000404
ieee1394: send packet local: ffc00560 ffc00000 00000000 34393331
ieee1394: received packet: ffc00560 ffc00000 00000000 34393331
ieee1394: send packet local: ffc00940 ffc0ffff f0000408
ieee1394: received packet: ffc00940 ffc0ffff f0000408
ieee1394: send packet local: ffc00960 ffc00000 00000000 32a264e0
ieee1394: received packet: ffc00960 ffc00000 00000000 32a264e0
ieee1394: send packet local: ffc00d40 ffc0ffff f000040c
ieee1394: received packet: ffc00d40 ffc0ffff f000040c
ieee1394: send packet local: ffc00d60 ffc00000 00000000 99241b00
ieee1394: received packet: ffc00d60 ffc00000 00000000 99241b00
ieee1394: send packet local: ffc01140 ffc0ffff f0000410
ieee1394: received packet: ffc01140 ffc0ffff f0000410
ieee1394: send packet local: ffc01160 ffc00000 00000000 10221929
ieee1394: received packet: ffc01160 ffc00000 00000000 10221929
ieee1394: send packet local: ffc01550 ffc0ffff f0000400 04000000
ieee1394: received packet: ffc01550 ffc0ffff f0000400 04000000
ieee1394: send packet local: ffc01570 ffc00000 00000000 04000000
ieee1394: received packet: ffc01570 ffc00000 00000000 04000000
ieee1394: NodeMgr: raw=0xe064a232 irmc=1 cmc=1 isc=1 bmc=0 pmc=0 cyc_clk_acc=100 max_rec=2048 max_rom=1024 gen=3 lspd=2
ieee1394: Host added: ID:BUS[0-00:1023] GUID[001b249929192210]
ohci1394: fw-host0: suspend called
ohci1394: fw-host0: Cancel request received
ohci1394: fw-host0: Soft reset finished
ohci1394: fw-host0: Device removed.
ohci1394: fw-host0: Device removed.
[-- Attachment #3: 1394.resume --]
[-- Type: text/plain, Size: 2954 bytes --]
ohci1394: fw-host0: resume called
ohci1394 0000:02:06.1: restoring config space at offset 0xf (was 0x4020200, writing 0x4020205)
ohci1394 0000:02:06.1: restoring config space at offset 0x4 (was 0x0, writing 0xe0101000)
ohci1394 0000:02:06.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
ohci1394 0000:02:06.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
ohci1394: fw-host0: Soft reset finished
ohci1394: fw-host0: Receive DMA ctx=0 initialized
ohci1394: fw-host0: Receive DMA ctx=0 initialized
ohci1394: fw-host0: Transmit DMA ctx=0 initialized
ohci1394: fw-host0: Transmit DMA ctx=1 initialized
ohci1394: fw-host0: physUpperBoundOffset=00000000
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e0101000-e01017ff] Max Packet=[2048] IR/IT contexts=[4/4]
ohci1394: fw-host0: IntEvent: 00030010
ohci1394: fw-host0: Got RQPkt interrupt status=0x00008409
ohci1394: fw-host0: SelfID interrupt received (phyid 0, root)
ohci1394: fw-host0: SelfID packet 0x807f8842 received
ieee1394: Including SelfID 0x42887f80
ohci1394: fw-host0: SelfID for this node is 0x807f8842
ohci1394: fw-host0: SelfID complete
ohci1394: fw-host0: PhyReqFilter=ffffffffffffffff
ieee1394: selfid_complete called with successful SelfID stage ... irm_id: 0xFFC0 node_id: 0xFFC0
ieee1394: NodeMgr: Processing reset for host 0
ohci1394: fw-host0: Single packet rcv'd
ohci1394: fw-host0: Got phy packet ctx=0 ... discarded
[<ffffffffa00f2068>] (ohci_irq_handler+0x0/0xa4f [ohci1394])
ieee1394: send packet local: ffc01940 ffc0ffff f0000400
ieee1394: received packet: ffc01940 ffc0ffff f0000400
ieee1394: send packet local: ffc01960 ffc00000 00000000 c8350404
ieee1394: received packet: ffc01960 ffc00000 00000000 c8350404
ieee1394: send packet local: ffc01d40 ffc0ffff f0000404
ieee1394: received packet: ffc01d40 ffc0ffff f0000404
ieee1394: send packet local: ffc01d60 ffc00000 00000000 34393331
ieee1394: received packet: ffc01d60 ffc00000 00000000 34393331
ieee1394: send packet local: ffc02140 ffc0ffff f0000408
ieee1394: received packet: ffc02140 ffc0ffff f0000408
ieee1394: send packet local: ffc02160 ffc00000 00000000 32a264e0
ieee1394: received packet: ffc02160 ffc00000 00000000 32a264e0
ieee1394: send packet local: ffc02540 ffc0ffff f000040c
ieee1394: received packet: ffc02540 ffc0ffff f000040c
ieee1394: send packet local: ffc02560 ffc00000 00000000 99241b00
ieee1394: received packet: ffc02560 ffc00000 00000000 99241b00
ieee1394: send packet local: ffc02940 ffc0ffff f0000410
ieee1394: received packet: ffc02940 ffc0ffff f0000410
ieee1394: send packet local: ffc02960 ffc00000 00000000 10221929
ieee1394: received packet: ffc02960 ffc00000 00000000 10221929
ieee1394: send packet local: ffc02d50 ffc0ffff f0000400 04000000
ieee1394: received packet: ffc02d50 ffc0ffff f0000400 04000000
ieee1394: send packet local: ffc02d70 ffc00000 00000000 04000000
ieee1394: received packet: ffc02d70 ffc00000 00000000 04000000
next prev parent reply other threads:[~2008-12-11 16:03 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-06 12:16 ohci1394: "irq 19: nobody cared" during resume from suspend to ram Frans Pop
2008-12-06 13:11 ` Stefan Richter
2008-12-06 13:37 ` Frans Pop
2008-12-06 14:36 ` [patch] ohci1394: don't leave interrupts enabled during suspend/resume Frans Pop
2008-12-06 16:12 ` Stefan Richter
2008-12-06 21:03 ` Robert Hancock
[not found] ` <tkrat.fd592eed61e41b8f@s5r6.in-berlin.de>
2008-12-07 3:28 ` Robert Hancock
2008-12-07 9:19 ` Stefan Richter
2008-12-07 18:57 ` Robert Hancock
2008-12-10 13:24 ` Frans Pop
2008-12-10 20:55 ` Stefan Richter
2008-12-10 21:46 ` Frans Pop
2008-12-10 22:25 ` Stefan Richter
2008-12-11 16:02 ` Frans Pop [this message]
2008-12-10 13:23 ` Frans Pop
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200812111702.57999.elendil@planet.nl \
--to=elendil@planet.nl \
--cc=hancockr@shaw.ca \
--cc=linux-kernel@vger.kernel.org \
--cc=rjw@sisk.pl \
--cc=stefanr@s5r6.in-berlin.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox