From: Balaji Rao <balajirrao@openmoko.org>
To: linux-kernel@vger.kernel.org
Subject: [PATCH 0/7] PCF50633 support
Date: Sun, 14 Dec 2008 16:31:53 +0530 [thread overview]
Message-ID: <20081214110152.3307.50843.stgit@cff.thadambail> (raw)
[Dropped LKML accidently - resending]
The following series implements support for NXP PCF50633. It's basically
an I2C device with 9 regulators, an ADC, a PMIC, a Battery Charger
and a RTC.
This chip is used in Openmoko Neo Freerunner mobile phone.
Driver for a similar chip PCF50606, used in Openmoko Neo 1973 device
will follow soon.
The specs are open and are available at
http://people.openmoko.org/tony_tu/GTA02/datasheet/PMU/PCF50633DS_02.pdf
---
Balaji Rao (7):
mfd: PCF50633 core driver
mfd: PCF50633 adc driver
mfd: PCF50633 gpio support
rtc: PCF50633 rtc driver
power_supply: PCF50633 battery charger driver
input: PCF50633 input driver
regulator: PCF50633 pmic driver
drivers/input/misc/Kconfig | 6
drivers/input/misc/Makefile | 1
drivers/input/misc/pcf50633-input.c | 119 ++++++
drivers/mfd/Kconfig | 23 +
drivers/mfd/Makefile | 6
drivers/mfd/pcf50633-adc.c | 263 ++++++++++++
drivers/mfd/pcf50633-core.c | 681 ++++++++++++++++++++++++++++++++
drivers/mfd/pcf50633-gpio.c | 86 ++++
drivers/power/Kconfig | 6
drivers/power/Makefile | 2
drivers/power/pcf50633-charger.c | 285 +++++++++++++
drivers/regulator/Kconfig | 7
drivers/regulator/Makefile | 1
drivers/regulator/pcf50633-regulator.c | 338 ++++++++++++++++
drivers/rtc/Kconfig | 6
drivers/rtc/Makefile | 1
drivers/rtc/rtc-pcf50633.c | 302 ++++++++++++++
include/linux/mfd/pcf50633/adc.h | 88 ++++
include/linux/mfd/pcf50633/core.h | 212 ++++++++++
include/linux/mfd/pcf50633/gpio.h | 52 ++
include/linux/mfd/pcf50633/input.h | 29 +
include/linux/mfd/pcf50633/led.h | 24 +
include/linux/mfd/pcf50633/mbc.h | 137 ++++++
include/linux/mfd/pcf50633/pmic.h | 75 ++++
include/linux/mfd/pcf50633/rtc.h | 43 ++
25 files changed, 2792 insertions(+), 1 deletions(-)
create mode 100644 drivers/input/misc/pcf50633-input.c
create mode 100644 drivers/mfd/pcf50633-adc.c
create mode 100644 drivers/mfd/pcf50633-core.c
create mode 100644 drivers/mfd/pcf50633-gpio.c
create mode 100644 drivers/power/pcf50633-charger.c
create mode 100644 drivers/regulator/pcf50633-regulator.c
create mode 100644 drivers/rtc/rtc-pcf50633.c
create mode 100644 include/linux/mfd/pcf50633/adc.h
create mode 100644 include/linux/mfd/pcf50633/core.h
create mode 100644 include/linux/mfd/pcf50633/gpio.h
create mode 100644 include/linux/mfd/pcf50633/input.h
create mode 100644 include/linux/mfd/pcf50633/led.h
create mode 100644 include/linux/mfd/pcf50633/mbc.h
create mode 100644 include/linux/mfd/pcf50633/pmic.h
create mode 100644 include/linux/mfd/pcf50633/rtc.h
--
Balaji Rao
next reply other threads:[~2008-12-14 11:36 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-14 11:01 Balaji Rao [this message]
2008-12-14 11:02 ` [PATCH 1/7] mfd: PCF50633 core driver Balaji Rao
2008-12-14 11:02 ` [PATCH 2/7] mfd: PCF50633 adc driver Balaji Rao
2008-12-14 11:02 ` [PATCH 3/7] mfd: PCF50633 gpio support Balaji Rao
2008-12-14 11:03 ` [PATCH 4/7] rtc: PCF50633 rtc driver Balaji Rao
2008-12-14 19:29 ` Alessandro Zummo
2008-12-14 22:04 ` Balaji Rao
2008-12-14 22:21 ` [rtc-linux] " Alessandro Zummo
2008-12-14 23:29 ` Balaji Rao
2008-12-14 23:39 ` Alessandro Zummo
2008-12-14 11:03 ` [PATCH 5/7] power_supply: PCF50633 battery charger driver Balaji Rao
2008-12-14 22:10 ` Balaji Rao
2008-12-15 22:38 ` Anton Vorontsov
2008-12-16 15:24 ` Balaji Rao
2008-12-14 11:03 ` [PATCH 6/7] input: PCF50633 input driver Balaji Rao
2008-12-15 7:35 ` Dmitry Torokhov
2008-12-16 15:18 ` Balaji Rao
2008-12-14 11:04 ` [PATCH 7/7] regulator: PCF50633 pmic driver Balaji Rao
2008-12-15 11:35 ` Mark Brown
2008-12-15 14:04 ` Balaji Rao
2008-12-16 10:27 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081214110152.3307.50843.stgit@cff.thadambail \
--to=balajirrao@openmoko.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox